Gryphon Online Safety GRYPHON01 Wireless Router User Manual Design 5

Gryphon Online Safety, Inc. Wireless Router Design 5

User manual

GRYPHON
Love the Connection
Quick Start Guide
Whats Inside:
1 Gryphon WiFi Router
1 12V Power Supply
1 Ethernet Cable
Download the Gryphon Connect App
from the iOS or Android store
Step 1 Step 2
Installation
Open the App, create a login, and follow
the instructions
Your QR code can be found on the
bottom of the Gryphon router
Gryphon: Secure WiFi Router Setup Guide
Username (Email)
Password
Step 3 Step 4
1 2 3 INTERNET
PWR
Plug one end of the Ethernet cable to
Gryphons Internet port.
Step 7 Step 8
1 2 3 INTERNET PWR
Plug the other end of the Ethernet cable to
the Ethernet port of your cable or DSL
modem.
Plug in the 12V power adaptor for
Gryphon
Wait for the light on the bottom of
Gryphon to start ashing and pair with
the Gryphon router.
Set the SSID and WiFi password. Click
done and you can start using the App
to manage your Gryphon network.
INTERNET
SSID
Wi Password
Step 5 Step 6
Specications
WiFi Others
* 802.11bgn and AC
* 3Gbps overall throughput
* Comprehensive WiFi security
* Simultaneous tri-band radios
(2.4GHZ, 2x 5GHz)
* 4x4 MU-MIMO
* Antenna beamforming
* Wireless mesh (with double pack)
* 6 high power internal antennas
* Guest WiFi
Power Supply
12vDC
Memory
512MB RAM, 4GB Flash
Smartphone App:
iOS, Android
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
oReorient or relocate the receiving antenna.
oIncrease the separation between the equipment and receiver.
oConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
oConsult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 38cm between the radiator & your body.

Navigation menu