GuangZhou HeyGears Technology U1GOM Bluetooth Wireless Earbuds User Manual PowerPoint
GuangZhou HeyGears Technology Ltd. Bluetooth Wireless Earbuds PowerPoint
User manual
HeyGears U1 Go
Instructions
Packing List
Ear Tips
Charging Case
U.1 Go
Charging Cable
Earbuds Schematic
Ear Tips
MIC
(only right earbud)
Button
Charging Contact
Charging Case Schematic
Terminal port
Earbuds Pairing
Condition
Operation Guide
Pair for the
first time
U.1 Go enters pairing search mode automatically when turned
on. You can choose “U.1 Go” from the list of available Bluetooth
devices on your phone/PC.
Pair with the
latest device
U.1 Go connects to the latest paired device automatically when
turned on.
Pair with a
new device
Firstly, turn off U.1 Go. Secondly press the right earbuds for 5
seconds to turn it on. Finally, choose U.1 Go from the available
Bluetooth devices on the new device.
Turn on
Press button ○
Turn off
Press button ○ for 2S
Wear Description
Notice the signs on the earbuds——L represents left
ear，R represents right ear：
Front Side
Conditions
Features
Operations
Making a
phone call
Answer
When having income call, press the button of
right earbud.
Reject
When having income call, long press the button
of right earbud.
Hang up
When in the call, long press the button of right
earbud.
Playing music
Play
After opening the music APP, press the button of
right ear.
Stop
When playing music, one-press on the right ear.
Next
When playing music, double-press on the button
of the right ear.
Operations
Earbuds Charging
1、Put the earbuds in the charging case.
2、Connect the charging case to the device which can
offer power using a charging cable.（such as：
PC/power bank）。
3、The earbuds is being powered when the indicators
on left and right earbuds are on.
Indicator
Connect the charging case
to the powered device
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.