GuangZhou SunFieldAimo Electronic Technology XYAM Wireless follow focus controller User Manual Rattlesnake Follow Focus Manual

Download:
Mirror Download [FCC.gov]
Document ID	3496438
Application ID	CDARuaqWEBod65TwLNowyw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.75kB (246827 bits)
Date Submitted	2017-08-04 00:00:00
Date Available	2017-08-04 00:00:00
Creation Date	2017-06-08 10:58:10
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-06-08 11:02:40
Document Title	Rattlesnake_Follow_Focus_Manual
Document Creator	Adobe Illustrator CC 2017 (Macintosh)

Wireless follow focus
controller
USER MANUAL
Model:CG-FC821,CG-FC831
Brand:CINEGEARS
Manufacture:GuangZhou SunFieldAimo Electronic Technology Co., Ltd
Contents
Introduction
Rattlesnake Follow Focus User Manual
Setting Up the Controller
Using the Controller
Setting Controller Modes
• Controller
• Syncronization
• Automatic Calibration
• Manual Calibration
• LED Marker Light
• Screen Brightness
• Remote Record Trigger
• Setting Up Vibration and Lock Points
• Setting Presets
• Changing Motor Speed
• Changing Damping Setting
• M-Normal Mode
• M-Lock Mode
• M-Zoom Mode
• Manual Mode
Disclaimers
About Cinegears
Introduction
The Wireless follow focus controller is a wireless lens control kit for
driving your lens rings (focus, iris, and zoom.) The W ireless follow
controller has been redesigned to be more ergonomic than ever before.
With up to 20 hours of continuous shooting per battery charge, control your
lens focus, iris, or zoom with precision from up to 200 meters away with our
Wireless follow focus controller. Our controllers work with jib, Steadicam,
MoVI, and Gamble stabilizer shots, allowing you to perform with precision
without sacrificing the mobility of your cameras or the integrity of the shot. The
larger focus wheel feels more fluid, precise, and ergonomic, and the mounting
harness allows you to use it like a finger wheel. Also included are two thick
magnetic marking discs and a redesigned Lemo cable, with a right-angle
connector that helps keep your wiring clean.
Setting Up the Controller
Controller
The controls have been designed for ease of use: They allow for preset
memory points, where you can save up to four, as well as two lock points
that will cause the controller to vibrate as you approach them. Choose from 16
different speed levels to control the transition speed of the presets, and 4 different
damping levels from ultraresponsive to ultra smooth. The controller has an accuracy
circuit built into it to ensure the lens stop precisely where you want it to, even after
repeated use.
Synchronization
Turn on the remote control power switch and plug in the motor. Once both are
on hold (SET) + (POWER) for 3 seconds. The motor light will stop blinking, and
the gear will shudder. This means that the controller and motor have been
successfully synchronized. (Note: This process is usually done before leaving
the factory.)
Automatic Calibration
1) Before installing the drive onto the lens, please make sure the wireless
remote controller and motor are powered on and connected. DO NOT turn the
wireless remote control dial, put the drive gear close to the lens ring and
tighten the screws.The controller can automatically locate the start and end points
of any lens. To calibrate your lens, hold the (SET) + (A) button on the remote
controller for 3 seconds.
Manual Calibration
Rotate the focus ring clockwise to the end; hold (SET) + (REC) + (POWER)
buttons together for 3 seconds. Rotate to the opposite end and press the three
buttons again
LED Marker Light
Press (POWER) quickly to toggle marker light ON or OFF.
Screen Brightness
To change screen brightness, press and hold (SPEED) + (A), (B), (C), or (D),
(SPEED) + (A) being the lowest brightness level, (SPEED) + (D) being the
highest brightness level.
Using the Controller
Remote Record Trigger
Press (REC) on your controller to toggle Recording mode ON or OFF.
Setting Up Vibration and Lock Points
Press and hold (REC) to toggle turn on/off the vibration setting. Press and hold
(REC) + (A) to set controller to “M-Normal.” Turn controller to desired
start point and press and hold (SET) + (C) to set lock point 1.
Turn controller to desired end point and press and hold (SET) + (D)
to set lock point 2.
To clear all lock points, press and hold (REC) + (D).
Setting Presets
Go to the focus point of your choosing, press and hold (A) button until it flashes,
your point is now set. Repeat with (B) (C) and (D) for multiple points. Press the
same preset button to exit the preset mode.
Changing Motor Speed
Press (SPEED) on the controller to adjust the motor speed.
Changing Damping Setting
Press and hold (POWER) + (REC) + (A) to set motor to damping 1 (Responsive +).
Press and hold (POWER) + (REC) + (B) to set motor to damping 2 (Responsive).
Press and hold (POWER) + (REC) + (C) to set motor to damping 3 (Smooth).
Press and hold (POWER) + (REC) + (D) to set motor to damping 4 (Smooth +).
Setting Controller Modes
M-Normal Mode
Press and hold (REC) + (A) to switch to M-Normal mode. In
M-Normal mode, user can set vibration points, and move controller beyond set
lock points.
M-Lock Mode
Press and hold (REC) + (B) to switch to M-Lock mode. In M-Lock mode, user
cannot move past set lock points.
M-Zoom Mode
Press and hold (REC) + (C) to switch to M-Zoom mode. In M-Zoom
mode, user cannot move past set lock points. In M-Zoom, controller moves more
slowly between lock points for finer control.
Manual Mode
Specifically used with infinity lenses that have no start or end point. Press
(SET) + (B) for 3 seconds until you see the (A), (B), (C), (D) lights go on. Then use
(C) or (D) button to control the lens. (Hold down the C or D key for more
than 3 seconds to rotate continuously.) Once it rotates to the proper
position, click the (A) button to set a starting point, (B) button to set the end point.
After points are set, the (A), (B), (C), and (D) lights turn off to indicate the initialization
has been completed.
Disclaimers
Terms and Conditions
Congratulations on purchasing your new CINEGEARS product. Please read
this manual carefully before using the product. By using this product, you
hereby agree to this disclaimer and signify that you have read it in full. You
agree that you are responsible for your own conduct and any content created
while using CINEGEARS products, and for any consequence thereof. You
agree to use this product only for purposes that are proper and in accordance
with local regulations, terms and any applicable polices and guidelines.
By reading this disclaimer, you also agree:
1. Any part of this disclaimer is subject to change without prior notice. Refer to
WWW.CINEGEARS.COM for the latest version.
2. CINEGEARS reserves the right of final interpretation of this disclaimer.
CINEGEARS and the Follow Focus Kit are registered trademarks of Littlecent
International Trading Corp. as names of product, brand, etc., appearing in this
manual are trademarks or registered trademarks of their respective owner
companies. This product and manual are copyrighted by CINEGEARS with all
rights reserved. No part of this product or manual shall be reproduced in any
form without the prior written consent or authorization of CINEGEARS.
About Cine Gears Inc.
Cine Gears Inc. is an industry leading company that designs and manufactures digital
wireless follow focus systems, lens control systems, camera motion control systems
and accessories for film and broadcast industry. As a big believer in the power of
creativity and ideas, we designed the Pegasus cablecam, the wireless motor drive that
integrated a built in wireless transmitter, and the wireless finger wheel controller. The
Cine Gears Inc. wireless lens control system has the international CE certification on
all its equipment. Cine Gears lens control system can achieve the finest minutia of
focus pulling, with extreme accuracy and control. This very same technology is what
drives the Pegasus for ultra-smooth, highly controlled, programmed movement.
We have been working from Vancouver, B.C. for five years and our equipment has
been used on hundreds of movies. Filmmakers of all experience levels will benefit
greatly from a simple, professional, and well rounded follow focus system. The Single
Axis and Multi Axis models provide greater ease, with lesscrew, and less wires. You
can achieve professional film quality scenes on a shoestring budget. Camera
operators, assistant camera operators, and jib operators can use the wireless follow
focus to attain that perfect shot.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:06:08 10:58:10-07:00
Creator                         : Adobe Illustrator CC 2017 (Macintosh)
Modify Date                     : 2017:06:08 11:02:40-07:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Title                           : Rattlesnake_Follow_Focus_Manual
Metadata Date                   : 2017:06:08 11:02:40-07:00
Creator Tool                    : Adobe Illustrator CC 2017 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 112
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9228 bytes, use -b option to extract)
Instance ID                     : uuid:e60bb401-253c-d541-b295-ac2bc38f9cc8
Document ID                     : xmp.did:a8e0b08d-c28f-4cfb-9c56-7d23190090b6
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:79d651b4-1b77-f54f-b589-860716817696
Derived From Document ID        : xmp.did:bc7f57ba-2f91-454d-b777-b3f52969639f
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:63444386-74cd-234a-aa19-82f43b6e1b0e, xmp.iid:a8e0b08d-c28f-4cfb-9c56-7d23190090b6
History When                    : 2016:06:16 12:32:30-07:00, 2017:06:08 10:58:11-07:00
History Software Agent          : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2017 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/ai/Desktop/Cinegears_Photos_Archive/200_Wireless_Follow_Focus/20_Rattlesnake_Basic_Kit_with_Standard_Motor/2-805_Rattlesnake_Basic_Kit_With_Standard_Motor_OpenCase.jpg, /Users/ai/Desktop/Cinegears_Photos_Archive/200_Wireless_Follow_Focus/20_Rattlesnake_Basic_Kit_with_Standard_Motor/2-805_Rattlesnake_Basic_Kit_With_Standard_Motor_ControllerFront.jpg, /Users/ai/Desktop/Cinegears_Photos_Archive/200_Wireless_Follow_Focus/20_Rattlesnake_Basic_Kit_with_Standard_Motor/2-805_Rattlesnake_Basic_Kit_With_Standard_Motor_ControllerBack.jpg, /Users/ai/Desktop/Cinegears_Photos_Archive/200_Wireless_Follow_Focus/20_Rattlesnake_Basic_Kit_with_Standard_Motor/2-805_Rattlesnake_Basic_Kit_With_Standard_Motor_ControllerFront.jpg
Manifest Reference Document ID  : adobe:docid:photoshop:21b76184-86d6-117a-beab-f4065b177ef6, adobe:docid:photoshop:4b331526-86d5-117a-beab-f4065b177ef6, adobe:docid:photoshop:cd4f69e5-86d5-117a-beab-f4065b177ef6, adobe:docid:photoshop:4b331526-86d5-117a-beab-f4065b177ef6
Manifest Reference Instance ID  : xmp.iid:955c15be-a1ed-46bd-8d0a-e83d7b8a42ca, xmp.iid:8324edd1-51a3-417c-a263-f6cc83a3f6be, xmp.iid:6f319b4f-5d3d-4fe2-ab08-e2d036c07b37, xmp.iid:8324edd1-51a3-417c-a263-f6cc83a3f6be
Ingredients File Path           : /Users/ai/Desktop/Cinegears_Photos_Archive/200_Wireless_Follow_Focus/20_Rattlesnake_Basic_Kit_with_Standard_Motor/2-805_Rattlesnake_Basic_Kit_With_Standard_Motor_OpenCase.jpg, /Users/ai/Desktop/Cinegears_Photos_Archive/200_Wireless_Follow_Focus/20_Rattlesnake_Basic_Kit_with_Standard_Motor/2-805_Rattlesnake_Basic_Kit_With_Standard_Motor_ControllerFront.jpg, /Users/ai/Desktop/Cinegears_Photos_Archive/200_Wireless_Follow_Focus/20_Rattlesnake_Basic_Kit_with_Standard_Motor/2-805_Rattlesnake_Basic_Kit_With_Standard_Motor_ControllerBack.jpg, /Users/ai/Desktop/Cinegears_Photos_Archive/200_Wireless_Follow_Focus/20_Rattlesnake_Basic_Kit_with_Standard_Motor/2-805_Rattlesnake_Basic_Kit_With_Standard_Motor_ControllerFront.jpg
Ingredients Document ID         : adobe:docid:photoshop:21b76184-86d6-117a-beab-f4065b177ef6, adobe:docid:photoshop:4b331526-86d5-117a-beab-f4065b177ef6, adobe:docid:photoshop:cd4f69e5-86d5-117a-beab-f4065b177ef6, adobe:docid:photoshop:4b331526-86d5-117a-beab-f4065b177ef6
Ingredients Instance ID         : xmp.iid:955c15be-a1ed-46bd-8d0a-e83d7b8a42ca, xmp.iid:8324edd1-51a3-417c-a263-f6cc83a3f6be, xmp.iid:6f319b4f-5d3d-4fe2-ab08-e2d036c07b37, xmp.iid:8324edd1-51a3-417c-a263-f6cc83a3f6be
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 612.000000
Max Page Size H                 : 792.000000
Max Page Size Unit              : Points
Font Name                       : ArialMT, Arial-BoldMT, Impact, MyriadPro-Regular
Font Family                     : Arial, Arial, Impact, Myriad Pro
Font Face                       : Regular, Bold, Regular, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.01.2x, Version 5.01.2x, Version 5.00x, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329
Font Composite                  : False, False, False, False
Font File Name                  : Arial.ttf, Arial Bold.ttf, Impact.ttf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 15.00
Page Count                      : 9

EXIF Metadata provided by EXIF.tools