GuangZhou Walkera Technology WK-2401 RC MODEL PLANE User Manual 1

GuangZhou Walkera Technology Co., Ltd RC MODEL PLANE 1

Contents

User Manual 1

Download: GuangZhou Walkera Technology WK-2401 RC MODEL PLANE User Manual 1
Mirror Download [FCC.gov]GuangZhou Walkera Technology WK-2401 RC MODEL PLANE User Manual 1
Document ID1122755
Application ID8BPwBGTGxSAuY07rgqsqaw==
Document DescriptionUser Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize204.01kB (2550158 bits)
Date Submitted2009-06-11 00:00:00
Date Available2009-06-11 00:00:00
Creation Date2009-05-26 12:00:57
Document Lastmod2009-05-26 12:01:14
Document TitleUser Manual 1

Spcclflcatlons:
Maln Rotor Diameter: 340 mm Allrup Weight: 188g (Battery included) Receiver: RX—ZAM
Tail Rotor Diameter: 340 mm Drive System: 2 x 130PH Transmitter: WK72401
Overall Length; 365 mm Battery; 3.7v 1000mAh Li-Po Gyro: Built-in
Servo: weighlajg / speed 0.11sec/50' (43W torque 0.90kglcm(4 svi / dlmension 22.5X11.5X24mm
Features:
1). HMSG4, an optimal mode for the beginners. is otcoaxial structure with emulationai effect. The usage at cw and cow spinning
oi the upper and lower main rotor blades and the auto control of buillrln gyro assure your helicopter llying stably and easily
2) 2 x laoPH brushed motors es drive are powerful and suitable Var various courses
3). 3—ina1 recelving circuit, capable ol servo extent adiustrnent and buillain gyro sensitivity adjustment, offers you with customized
and fins parameters
4) The flight lime at the 3 7V 1000mAh Li-Po bsfiery will be up to 7-10 minutes
5) The usage of 2 AG technology ls prompler in reaction, more sensitive in operation, and slronger in antlrinterlerence.
‘mroduction > - - »
Warning .............
Caulions . . .
Transmitter Fealures . .. .
Receiver Idenlification --------------
Switch Between Model : and Model 21 Thromes -------
Flybar Ssl Assemmy »-
Ballery Mounting and Adjusimsnl --------
Swashp‘ate Adjuslmsnl ------
Main Rotor Blade Adjustment »--»
Flight Mode - -- -
Introduction
Thank you for your purchase of our product. in order to enjoy all the benefits at your helicopter, we recommend you carelully read the entire manual
belore you begin working with this model Alieryou have read the manual please store it in a safe place ioriulure reference.
1 Walkera helicopters are not toys They are a complex combination of electronics and mechanics which produce an aerodynamic mlurcrafl All
models require proper setup and exacting adjustments to avoid accidents We accept no liability iordamage and/or consequent damage arising
from the use or misuse of the products due to improper construction methods, use or operation, it is your responsibility to operate this highly
advanced model in a sale manner
2 When charging the battery, do not overcharge. Overcharging may result in fire or explosion When the battery is hot during charging, please
stop charging at once. Use specified charger only. Never short circuitl Proper disposal of the battery is your responsibility.
3. Children under 14 years old are strictlyfortridden from ilying the helicopter. Please do not allow children or adults in the designated flying area.
4. Any situations that occur during fight, that cause the rotor blades to stop spinning or that result in a serious ground strike and cause damge to the
helicopter could initiate a fire or explosion. it this type of situation occurs, lMMEDIATELY move the throttle stick to it‘s lowest position.
5 Before flying your helicopler. please undraw the upper and lower blades and make sure (he left and right blades are in line.
Notice: ® Please put the mdder trim in the neutral position before the power supply is connected to the helicopter.
(3 please let the motors cool 10 minutes alter your helicopter liies every one oiiully charged battery packs, and then continue your next flight;
otherwise. the motors of your helicopter will lake a high risk of burning or damage!
1 Because the helicopter is operated by radio control, it is important to make sure you are always usmg fresh and/orfully charged oetteries
Never allow the batteries to run low or you could lose control of the helicopter
2. Do not allow any of the electrical components to get wet. Otherwise electrical damage may occur.
3. You should complete a successful range check of your radio equipment priorto each new day of flying, or priorto the firsl flight of a new
or repaired model
4. lf the helicopter gets dirty, don't use any solvents to clean it. Solvents will damage the plastic and composite parts.
5. Always turn on the transmitter before plugging in the flight battery and always unplug the flight battery before turning off the transmitter.
6 Never cul the receiver antenna shorter or you could lose control of the helicopter during flight
7 When flying the helicopter. please make sure that the transmitter antenna is completely extended and is pointed up toward the sky. not
down toward the ground
no tfly your ll copter at the places w r these signs
$7
MW
@e
m“
£3
53?
45
l“ a
a it
“ lil
Transmltter atures
WK-2401 Instruntion:
t The usage of 2 46 technology is prompter in reaction, more sensitive in operation, and
stronger in anti-interference
z The means ofautcmatically scanning and code pairing:
A Push the throttle stick to the lowest position and turn on the transmitter, and then the
power indicator will flash ( Note: never move any control slicks when it is flashing)
B. The receiver LED will flash swiftly as soon as the battery is connected to the receiver, and
will get a solid light 173 seconds later (Note: Do move the right control stick when it is having
a solid light) When the power indicator of the transmitter has stopped flashing to recover
to the state of power indication, the codes have been matched successfully, and you can
fly the helicopter.
Note: it will take about 10 second for the codes to match. lfthe codes fail to match, please
re-tum on the trahsrnitterto match again Please do not have the codes matched simultaneously
when a few of people are flying their helicopters in the same field.
4-ct-l Transmitter Features:
1 The DlP switches are available for various serves it can perform the tllght actions such as
ascending, descending, forward, backward, leftward, rightward and so on.
2. 4-channel micro-computer as the encoder; output power: 5 1DmW; current drain: SDmA;
power source: 1 zv x a Ni-Cd battery t 9 sv SOOmAh) or 1 sv x 8 AA dry cell battery
3 Free to switch between Iefl-hand and right-hand thmmes
Control Idemification and Function:
MODE l - EUROPE A AUSTRALIA
1. Left stlckl Rudder It controls your helicopter forward. backward, left. and right Push up
to fly your helicopter forward, pull down to fly backward, push leftward to fly left, and push
rightward to fly right.
lmnnz l , EukoPE a AumAUAt
Left slick/ Rudder
Power indicator
Throttle trirrl
Power swltch
Right 51le lThroltle
Aileron trim
Elevator trtnr
Rudder trim
lritons ll atom a "45ch
Left stick {Throttle
Power indicator
Elevator trlm
Power switch
Right stlok/ Rudder
Alleron trim
Throttle trirn
Rudder trim
2. Right stick I Throttle. lt controls your helicopter ascending, descending, left moving
and right moving Push up to ascend your helicopter; pull down to descend. push leftward
Fig 14 Antenna to move your helicopter left, and push rightward to move right
MODE II , NORTH AMERICA
1. Left stick! Throttle. tt controls your helicopter ascending, descending, left, and right Push up
CNN,“ to ascend your helicopter, pull down to descend, push leftward to fly lot and push rightward
cover to fly right
. z. Rigtrtstictr l Rudder. tt controls your heliooplerfommrd. backward. tett moving and right mov'ng.
Chm“ 15“ Push up to tly your helicopter forward, pull down to fly backward, push leftward to move your
Comer,“ helicopter left, and push rightward to move right.
“my b“ 3. Power indicator. The indicator is oonsisted of three colors: red, yellow, and green Green
LED on means the electricity is enough to fly; Green LED off and yellow LED on indicate
the power is not enough and stop flying; Yellow LED off and red LED on show the power is
in extreme shortage, and please stop flying at once
4. Etevatortrlrn. tt controls and modifies yourhelioopter forward and backward Push up to
HQ 2 D", s Wm fly forward, and pull down to fly backward.
5. Rudder trim. The trim oontrots and modifies your helicopter leftward and rightward. Move
Elevator the trim left to fly leftward, and move right to fly rightward
flan“ ti.Throttle trim. The throttle trim controls your helioopterto ascend and descend Push up
R 2; e the trim to ascend, and pull down to desoend
u er
7. Aiteron trim. The aileron trim controls your helicopter lettvrard and rightward Push the trim
tell to fly tell, and push the trim rightward to fly right
Not used a. Power switch. Turn on or off the power ofthe transmitter. Push up the switch to turn
on the power, and push down to turn off
9. Anhnna. Transmit the signals.
10. charge jack. Charge the rechargeable battery pack at current 50mA, voltage < 12V.
(Notice: the charge jack is forbidden to use for nonarechargeable battery pack)
11. Battery box. Please note the polarities white inserting the batteries

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2009:05:26 12:01:14+08:00
Create Date                     : 2009:05:26 12:00:57+08:00
Metadata Date                   : 2009:05:26 12:01:14+08:00
Format                          : application/pdf
Document ID                     : uuid:9bf607e7-8707-4409-91f9-92b071625c42
Instance ID                     : uuid:f4d79bdf-0326-4c64-9b75-adf1c1967842
Page Count                      : 6
EXIF Metadata provided by EXIF.tools
FCC ID Filing: S29WK-2401

Navigation menu