GuangZhou XiaoPai Technology FX801 Smart Pet Feeder User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3520636
Application ID	FovqL4QsNpBorGdK0Us3Bg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	175.92kB (2198992 bits)
Date Submitted	2017-08-21 00:00:00
Date Available	2017-08-21 00:00:00
Creation Date	2017-08-18 10:40:44
Document Lastmod	2017-08-18 11:01:00
Document Title	User Manual
Document Author:	Administrator

Instruction Manual
Please carefully read this instruction manual
before you start to use this device.And please kindly
keep this manual for necessary check in the future.
Content
1. Regular Information········································1
Buttons and Indicators··································1
Accessory and Interface································2
2. Download and Set up the App of Device··················3
3. Guide for Initial Usage····································4
Sign up and Sign in the Account·······················4
Forgot Password·········································5
Connect and Bind the Device··························6
4. General Instruction for APP·······························8
Homepage················································8
Feed ······················································9
Video····················································10
Settings··················································11
More ····················································14
5. Answers for Popular Questions in Usage·············15
1.Regular Information
Buttons and Indicators
3 4
1. Switch button: Press it to open the feeder cover.
2. Setting button:
1) Press the Setting button in a short time: It will feed a share of feed when you
press once.
It is ineffective to press the buttons when the Motor rotating.
2) Hold the Setting button :The device will be reset after you hear Ding-Dong when
you press the button for about 5 seconds.
3. Red indicator light
1) Light is continuously on: The device is in a work status.
2) Light is off: The device is off power.
3) Light is flickering: There is a fault with the device.
4. Green indicator light
1) Light is off：System is in setup status.
2)Flicker slowly (flicker once in one second): The device is waiting for
connection,which means it is in AP mode.
3) Flicker quickly (flicker seven times in one second): The device is networking .
4) Light is continuously on: The device is successfully connecting to the network.
Please do not cut off the power supply and do not turn off the switch or even do
not disconnect the network when the light is in quickly flicker situation.
Accessory and Interface
1. Top Cove: With transparent and visible material , you can easily check the rest
quantity of food inside.
2. Mic: Record your voice.
3. Wide-angle lens:130°visible vision-angle.
4. Discharge outlet: Where food come through.
5. Bowl for holding food: Removable and with buckle-designed.
6. Power interface: Interface for power supply.
7. Battery compartment: The place to put backup battery.
8. Power switch:
means power off, — means power on.
2.Download and Set up the App of Device
Downloadand
andInstallation
Installationfor
for
Download
Android
System
Phone
IOS System
Phone
Two
download
and and
install
Two ways
waysto to
download
the
APP.
install
the APP.
Method
No.1: Scan
ScanQR
QRcode
code
Method No.1:
below.
below.
（QR code for IOS PetFun ）
Method NO.2：Search the PetFun in
Apple store to download and install it
（QR code for Android PetFun）
Method NO.2：Search the PetFun in
Google-play to download and install it.
3. Guide for Initial Usage
Sign up Account
Sign In Account
1. Open PetFun App
1. Sign in account
1) Enter your registered email
and password.
2) Click Sign In.
2. Click Sign Up
3) Log in successfully, jump to
binding page.
3. Fill Information
To ensure that the mailbox
can be used to prevent password
loss, if lose,it can be used to
retrieve the password.
For your account security,
please fill in 6 or more passwords.
4. Click Submit to finish register.
2. Authorized login
1)
log in to
the button you want to select.
2) Operate with the authorized
login prompt.
3) Log in successfully, jump to
binding page.
Forgot Password
1. Click Retrieve password.
5. Click Reset password
6. Enter the new password.
For your account
security,please fill in 6 or more
passwords.
2. Enter your registered email.
7.Reset new password successfully.
3. Click OK.
4. Open the mailbox to get the
password we sent you for
password reset.
Connect and Binding the
Device
1. Waiting for Connection
1) Plug in the power, and turn
on the switch.
2) Waiting the green indicator
light continuously on or
flicker.
When the smart phone is
connected to the WIFI, the
WIFI
name
will
be
automatically displayed, then
enter the corresponding WIFI
password and click Next.
3. Set the WIFI of the
device.
1）iPhone :
Enter the mobile phone
WIFI settings interface, and
connect the WIFI named
PETFUN_XXXXXX .After the
success of the connection,
double-click the phone HOME
key to return to the "PetFun"
program.
3) Press the Set button for a
while (about 5 seconds) until u
hear Ding-Dong.Click the
Next when the green indicator
light is slowly flickering.
Make sure your mobile
device is connected to the
available WIFI network.
2. WIFI Connection
2) Phone with Android
System：
Click Next to enter the WIFI
settings,and connect WIFI
named
PETFUN_XXXXXX
device WIFI.After the success
of the phone back to the button
to return to the "PetFun"
program.
4. Connected to the WIFI of
device, please click Next.
5.Mobile Phone is connecting
with the device.
6. Device
finished.
connection
is
8
4. General Instruction for APP
Homepage
1. Pet Name: Pet name you set can be Synchronously displayed.
2. Video Window: Click to switch to video page.
3. Feed Statistics: Show feed information today, and click to switch to feed page.
4. Menu bar: Main menu directory.
Feed
Click Feed or Feeding Date on the
homepage to enter the Feed page.
1. Automatic Feeding (Regular
Feeding)
Click AUTO on the feeding page to
enter the auto feed interface,then you
can set regular feeding schedule.
2) Feeding Record
You can choose existed record in the
app, if there is no default records,you
can take the Add Record behind as
reference.
3) Feeding Time
Slide hour bar and minute bar to select
the feeding time,then click OK to
complete the auto feeding schedule.
You can delete existed auto
feeding time by pressing the time bar
for a bit long time.And only 4 peace
auto feeding time can be set at most.
2. Manual Feeding
Click this button
at feeding page
to enter Manual Feeding interface.
Slide the bar to choose how much
you want to feed,and click Start to
feed your lovely pet.
1) Feeding Portion
Click Feeding Portion and you can
choose which you want. Finished the
setting,please click OK.
10
Video
Click the video button on the menu bar or video guide to enter the video interactive
interface.
1. Camera
Click it to capture the current video screen and you can store it on your phone or
SD card.
2. Talk
Click the call button, and when the icon becomes orange, you can send voice
commands to pets.
3. Monitor
You can monitor sounds around the device and hear the sounds of your pet.
4. Record
It can record the dynamic video of the pet, which will be stored on your mobile
phone or SD card.
5. Photos:
Saved photos can be browsed in picture library.
6. Video:
Saved videos can be browsed in video library.
11
Settings
Click the Settings on the menu bar to
enter setting interface.
1. Pushing Switch
Select whether or not to allow APP to
notify the device status (feeding status,
fault) in the notification bar or pop up.
4. Recording Settings
1）Add new record
Steps:
①Click Recording Settings to
enter the recording management
interface.
②Click Add New Record
③Holding the recording button to
start recording,and release it to end
the recording (the longest recording
last for 10s).
2. Share Switch
Decide if allow the share bar
immediately pop up after capturing the
video screen.
3. Storage Location
Select phone or SD card as the storage
location for photos,videos and other date.
④Listen to the audio just recorded ,
if not satisfied, click Restart and
back to step ③.if satisfied,click OK
to continue next step.
12
2）Delete the recording
①Click Recording Settings to enter
the management interface.
⑤Name the audio.
②Hold the recordings you want to
delete.
③Click OK to delete it.
⑥Waiting for the recording transmit to
the device.
13
5. Modify the Password
1) Click Password on the Settings to
enter the interface to modify the
password.
2）Enter original password and new
password.
If the password is not in line with
the password confirmation, please
confirm if the new password is the same
as the confirmed password.
1) Picture Setting
Click Camera, and picture below
will pop up. You can choose
Camera to take picture or select
picture from Photo Album.
2）Nickname Setting
Enter your pet name at the
nickname prompt.
3）Way to set age and weight
Ⅰ.Click “-” or “+” .
Ⅱ.Slide this mark .
Ⅲ.Click this mark
and you can
put exact date directly.
4) Species
①Click Species.
②Select cat, dog or others.
6. Add or modify the information
about the pet.
③Select proper species of your
pet,if no proper one,please kindly
enter the species of the pet.
5) Feature Selection
Select the appropriate features of
your pet.
14
More
Click More on Menu bar.
3. Help & Feedback
If there is any questions about
PetFun products, please find our
contacts showed on Help
&Feedback page. And your good
idea or suggestions about our
product or company are also
welcomed to tell us. Your kindly
support is our biggest motive
power.
1. Event List
Record feed type, number of feeds,
feeding time and equipment failure.
4. About
You can focus on the version
number of the program,and Check
for Updates will be added in this
part.
Click Edit to select what you want to
delete.
2. Unbound
1）Click Unbound.
2）Please return to Device and Bound1.3
to set a new binding.
5. Sign Out
If you want to change your account,
you can click Exit to sign out.
15
5. Answers for Popular Questions in Usage
1. When smart phone can not connect with the device,what should we do?
1) Check if there is any failures with the smart pet feeder.
2) Check the status of power supply indicators.In normal situation,the red light is on,and
green light is flicker slowly.
3) Check the signal of device WIFI.
Please search the WIFI of device named PENTFUN_XXXXXX by your smart phone.
4) Uninstall the application and reload it.
Make sure that the authorized application has access to location information and network.
Please enter the correct WIFI password to ensure that the phone always (except when it
connects with the device) be connected to the external network WIFI.
Please contact customer service when the above methods can not work out.
2. When it can not reset by holding the SET button,what should we do?
Turn off the power and plug in the power again. If you can not reset, please contact
customer service.
3. Sometimes the device can not work when the phone connecting with the
PETFUN_XXXXXX，how to handle this matter?
It is possible that the phone automatically connected with other WIFI,which brings
interference for phone and device connection. If in this case,we can enter Phone Settings to
do manual connection.
4. Why it is not smooth to feed regularly?
1）Check the discharge outlet, when it is blocked, the red light will flicker.
2）Check if the motor is blocked by pet food.
5. When the signal of network is worse,how can we reconnect the device?
Method One: Exit the app and sign in again,then wait for the date updating.
Method Two: Switch to video interface, and wait for video refresh.
6. Why android phone can not talk and take photos?
Please confirm that you have authorized the program to use the camera and recording.
7. Information about capacity of SD card and the storage location for image and video.
SD card support 128G, and the storage location(on SD card or phone) for image and video
can be set on the phone.
8. What kind of network does the pet feeder need?
Wireless router supports 802.11BGN protocol. It do not need a mobile phone signal, as
long as you can connect to the network.
16
Warning Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC RF exposure compliance requirements, this grant is applicable
to only mobile configurations. The antennas used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2017:08:18 10:40:44+08:00
Modify Date                     : 2017:08:18 11:01:00+08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Administrator
Creator Tool                    : Microsoft® Word 2013
Metadata Date                   : 2017:08:18 11:01+08:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:35e5dbb0-64bd-4e5d-a7a1-0e1088d082e9
Instance ID                     : uuid:d11ae059-f752-4af1-89f9-72c8582c93c1
Page Count                      : 19

EXIF Metadata provided by EXIF.tools