Guangzhou Chicken Run Network Technology 2AF9S Bluetooth Audio Adapter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4181642
Application ID	4IZc0lA4+iAHQi1XmqB8UA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.22kB (202729 bits)
Date Submitted	2019-02-26 00:00:00
Date Available	2019-02-26 00:00:00
Creation Date	2019-02-19 02:47:31
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2019-02-20 10:20:10
Document Title	User Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	China

Bluetooth Audio Adapter
Product Specification
Product Name：Bluetooth Audio Adapter
Model No.：Gamesir-R3
Transmission distance：10 Meter（Just one device link）
Bluetooth version：Bluetooth3.0+EDR
Support Protocols：aptX LL,aptX,A2DP,AVRCP, HFP,HSP
Operation Voltage：5V~20V
Power Consumption：0.35W
PD Spec Rev：PD 2.0
PD Max Current：2.5A
Product Size：50mm*27.3mm*10.6mm
Description
GAMESIR-R3 is a perfect solution to enable Nintendo Switch connected to Bluetooth
receivers like Earphones, Headphones and Speakers.
GAMESIR-R3 can connect two Bluetooth audio receiving devices at the same time,
effectively improving the experience of multiplayer interactive games. Fast pairing,
quick pairing automatically re-pairs with the last paired device. 10m barrier-free
transmission.
Low latency real-time audio synchronization,Real-time Audio Sync with aptX Low
Latency. Transceiver adopts aptX LL codec to eliminate that annoying original audio
is not in sync with video and low quality sound. and ensure smooth transmission with
impeccable sound quality for excellent game feel either on Nintendo Switch handhold
mode or TV Dock mode.
Support USB Type-C Power Delivery, fast charging.Continuously wireless audio
streaming even with passthrough charging to Switch, and no overheating, No worrying
about power shortage. No Driver needed, Plug and Play.
Operating guidelines
First use
1. Turn on Earphone and set to Bluetooth matching status.
2. Plug Bluetooth Audio Transmitter Dongle to Nintendo Switch Type-C Port,then red
& blue LED blinking,Bluetooth audio dongle enter search Bluetooth Audio device
status.
3. Connection is successful, red LED turns on.
4. Press the button, blue LED blinking, will be pairing with another Bluetooth
device(Confirm that another Bluetooth device is in the pairing status).
5. Another Bluetooth device connection is successful,blue LED turns on.
Use again
1. Turn on the Bluetooth receiving device and set to Bluetooth matching status;
2. Plug Bluetooth Audio Transmitter Dongle to Nintendo Switch Type-C
Port. After the product is powered on, it will automatically connect back to
the last pair of 2 devices. If the pairing fails, touch the button and continue
to connect to the receiving device.
3. If you need to pairing other Bluetooth device, press and hold the button
for 3s, the LED is flashing, search for new devices, and connect
automatically. Pairing 2 Bluetooth receiving devices, you need to press this
2 times;
Q&A
1. How to shut down Bluetooth Audio Dongle?
Press button for 5seconds,until the LED off.
2. How to boot after shutdown?
Press button once time. And enter the back link status
3. How to restore factory settings?
Press button for 10seconds,until red LED & blue LED flashing three times.
4. How to pairing new devices?
Press the button 3seconds in the power on state,until LED flashing.
5. Why can't matching with a Bluetooth earphone?
Make sure the Bluetooth receiving device is matching status, If still can't
match,reboot earphone and Bluetooth Audio Dongle.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
§ 15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2019:02:19 02:47:31Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2019:02:20 10:20:10+08:00
Metadata Date                   : 2019:02:20 10:20:10+08:00
Format                          : application/pdf
Creator                         : China
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:15db8d52-9d69-4b5c-8661-9b44d07a105f
Instance ID                     : uuid:a223e10b-a73e-4657-a077-38e3dd7d5d9b
Page Count                      : 4
Language                        : zh-CN
Author                          : China

EXIF Metadata provided by EXIF.tools