Guangzhou FiiO Electronic Technology FCIDAB Bluetooth Hearphone Amp User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	3555375
Application ID	d0rQ4RaU/Najeaojb7n2gw==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.25kB (115673 bits)
Date Submitted	2017-09-11 00:00:00
Date Available	2017-09-11 00:00:00
Creation Date	2017-08-24 14:46:51
Producing Software	福昕高级PDF编辑器打印机 版本 8.0.2.0718
Document Lastmod	2017-08-24 14:46:51
Document Title	Users manual

Quick Start Guide
Bluetooth Hearphone Amp
Model No.: FB1121
English
Bluetooth Headphone Amplifier
Buttons and Ports labeled/Operation explained
3.5mm headphone port
B Volume up/Prev. track
Clip
A Power on/off//Pair/Play/Pause/Voice call/Sound effect
Sound effect
indicator (Green
light)
C Volume down/Next track
Lanyard hole
Status indicator (Red & Blue lights)
Micro USB charging port
Functions & Operations
Power on/off
Power on: Hold the button A for about 3 seconds when the device's off, and the blue
light will light up.
Power off: Hold the button A for about 3 seconds when the device's on, and the lights
will be off.
Reset: After powering on the device, hold the button B and button C at the same time
for about 5 seconds, and the Red and Blue lights will light up simultaneously.
How to enter pairing mode:
After powered on for the first time, the device would automatically enter the pairing
mode.
Hold the button A for about 5 seconds when the device is off to force the device to
enter Pairing mode.
When the device is paired up and playing music:
Play/Pause:
Click button A to play/pause music.
Volume up/down:
Click button B/C to turn up/down the volume
Switch songs:
Hold the button B/C to switch to the previous/next song.
Sound effect: Double click button A to turn on/off the sound effect
Answer phone call: Click button A when there's an incoming call.
End calling: Click button A during a phone call.
Reject phone call: Hold the button A when there's an incoming call.
Cancel a call: Click the button A to cancel when an outgoing call is not answered.
Indicator Display
Power on/off: Blue light flashes for three times.
Power on without connection: Blue light flashes twice every two seconds
Pairing mode: Red and blue lights flash alternately.
Device connected: Blue light flashes once every 2.5 seconds.
Low battery warning: Red light is steadily on while Blue light flashes to indicate the
current working status.
Charging: Red light is steadily on after connected while Blue light flashes to indicate
the current working status.
Charging completed: Red light lights off while Blue light still flashes to indicate the
current working status.
Sound effect: Green light lights up when sound effect is on, and lights off when sound
effect is off.
Notification sounds
There will be notification sounds under the following status:
Power on/off, reset, low battery, power on without connection, Bluetooth
disconnected, successfully paired up, sound effect on/off, volume up/down.
Notes and precautions
It's recommended to charge the device using a standard 5V charger.
Please don't place the device in circumstance of excessive high/low temperature
(above 45℃ or below 0℃)
Please keep the device away from liquids to avoid any damage to it.
If the device is to be left unused for a long time, please recharge it periodically to
preserve its battery life.
Please adjust the volume to a suitable level before putting on the earphones to
protect your hearing.
List of items included
BTR1*1, USB cable*1, Lanyard*1, Quick start guide*1, Warranty card*1
To learn more about the product, please visit our website: www.fiio.net.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two con
ditions: (1) This device may not cause harmful interference, and (2) this device must accept any i
nterference received, including interference that may cause undesired operation.Any Changes or
modifications not expressly approved by the party responsible for compliance could void the us
er's authority to operate the equipment. This equipment has been tested and found to comply w
ith the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de
signed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communicatio
ns. However, there is no guarantee that interference will not occur in a particular installation. If th
is equipment does cause harmful interference to radio or television reception, which can be dete
rmined by turning the equipment off and on, the user is encouraged to try to correct the interfer
ence by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is co
nnected.
-Consult the dealer or an experienced radio/TV technician for help.The device has been evaluate
d to meet general RF exposure requirement. The device can be used in portable exposure conditi
on without restriction.
FCC ID. : R56-FCIDAB

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 5
Author                          : 
Create Date                     : 2017:08:24 14:46:51+08:00
Creator                         : 
Modify Date                     : 2017:08:24 14:46:51+08:00
Producer                        : 福昕高级PDF编辑器打印机 版本 8.0.2.0718
Subject                         : 
Title                           : 

EXIF Metadata provided by EXIF.tools