Guangzhou Juan Intelligent Tech Joint Stock PE3021-W IP Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4050924
Application ID	p/JtTgjqZ5Q+iXKdNC73lQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.48kB (1318499 bits)
Date Submitted	2018-10-29 00:00:00
Date Available	2018-10-29 00:00:00
Creation Date	2018-10-26 10:12:22
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2018-10-26 10:12:22
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

WIRELSEE KIT
Statement
Thank you for purchasing our product! This quick user guide will talk about main usages of the
product.More information can be found on our website and the help center. This user guide may
contain inaccurate content due to hardware and software upgrade.It is subject to change without
previous notice.
Safety Caution
1.Please do not put any fluid container on the product.
2.Please use the product in ventilated environment and prevent blocking the vents.
3.Please use included power supply with the product to prevent damage to the product.
4.Please use the product under its standard working temperature and humidity.(advised in this
manual or distributor’s website)
5.Dust on PCB may cause short circuit.It is suggested to clean the dust on PCB timely to make the
product work properly.
6.Please obey the regulation and policy in your country and area during the installation of this.
Before Installation
This product may require cabling , we suggest to test all products&parts before installation and
cabling.
NVR
1、WIFI Antenna Ports:Double antennas to WIFI range
2、WAN Port:Connect your NVR to Internet
3、VGA Port:For viewing on VGA monitor
4、HDMI Port:For viewing on HDTV
5、USB Ports:For mouse and backup
6、Power Input
IPC
1. IPC with RJ45 connector
①W
WIFI antenna:: WiFi connecction with NV
VR；
②DC
C Port: input power 12V 1A;
③RJJ45 Port: for matching cod
de and wiredd connection between IPC and NVR. Ouur WIFI NVR KIT is
alreaady matched
d code beforre leaving faactory. If use
ers need to re‐match coode or use wired
conn
nection, please refer to ho
ow to add IP camera as be
elow.
2. IP
PC without RJ45 conne
ector
①W
WIFI antenna:: WiFi connecction with NV
VR；
②DC
C Port: input power 12V 1A;
③Reeset button::press reset button for 110 seconds to
t restore fa
actory settingg and enter into
matcching‐code mode.
Insttallation Instructio
n Of WIFI NVR KIT
Notte:
Wireless NVR can’t
be co
onnected too WIFI route
er wirelessly at presennt. They can be
onlyy connected
d by networrk cable.
Settup The Syystem
This system
m is standalone with eembedded Linux Operrating Systeem in the NVR.
Justt like a deskktop PC, ne
eed to hookk a screen to
t the NVR to enter thhe OS. Any TV ,
mon
nitor with VGA
V or HDM
MI input shoould work fo
or it.
1、IInstall antenn
nas for camerras and the N
NVR;
2、C
Connect a scrreen to the NVR
N via its HD
DMI or VGA port(HDMI and VGA cable not included);
3、P
Plug the NVR to power(use bigger 12V
V 2A power ad
dapter);
4、P
Plug camerass to power(usse smaller 12V
V 1A power adapters);
5、W
Within seconds, you should see camerra’s images on the screen;
6、P
Plug the mouse(included) to an USB poort on back off NVR. You sh
hall then be aable to operatte on
the ssystem.
In th
he OS you caan find fullestt functionalitties includingg live view, re
ecord, playbaack, video ba
ackup
and all settings.
Defaault ID: admin Password: none (meanss leaving the password em
mpty, just clicck login)
Tips：To protectt your privacyy, please set your passwo
ord at earliesst conveniencce. Right click the
mou
use→Go to Syystem Setup→
→System Ad min →User Management to set passw
word.
HD Install
the system may not include hard disk deepending on the kit you selected.
the NVR works most
3.5" SATA HDD or
o 2.5"SATA HDD
Unplug your NVR from po
ower,unscrew
w and remove
e the top cove
er.
1、U
2、C
Connect the SATA power and data ca bles from the NVR to the
e correspond ing ports on your
HDD
D (as shown).
3、h
holding the hard
drive an
nd the DVR ,,gently turn it over and line up the hholes on the hard
drivee with the ho
oles on the NVR.
using a pphillips screw
wdriver,screw
w the provideed screws into
o the
holees and assemble the coverr.
Notee：New HDD
D have to be formatted
beefore recordin
ng.
To get better WIFI sign
nal, it had bettter place the
e NVR in open area and hiigh position.
Reccord Video
Reco
ord video is very
easy on camera
syste m.
1、TTime Recordiing: Setup pe
eriod of timee of recordingg on NVR GU
UI .Right clickk mouse→Syystem
Setu
up→Record setup→Reco
ord Plan.Clicck “time”aand put mo
ouse icon onn the upperr left
corn
ner(for examp
ple“1”as picture
showss),press and drag the mou
use to the rigght to choose
e the
timee.The list will turn to red.
2、M
Motion Reco
ording: Only detect
motioon and then start
recordin
ng.Right clickk mouse→Syystem
Setu
up→Record setup→Reco
ord Plan.Clickk“motion”and put mo
ouse icon onn the upperr left
corn
ner(for examp
ple“1”as picture
showss),press and drag the mou
use to the rigght to choose
e the
timee. The list willl turn to gree
en.
3、A
Alarm record
ding: Right click mousee→System Setup→Reco
rd setup→RRecord Plan.Click
“Allarm”and put
mouse icon on thhe upper le
eft corner(fo
or example “1”as piccture
show
ws),press and
d drag the mo
ouse to the riight to choose the time. The list will tu rn to yellow.
Notee: Users can setup any period
of tim
me they want,for example
e 0:00:00‐23: 59:59,That’s 24
hourrs *7 days recording.Whe
en NVR deteccts hard disk,tthe default setting will bee 24 hours*7 days
reco
ording.
Vid
deo Playbaack
Step
ps:right clik mouse
in ma
ain menu→V
Video playbaack→choose date,channeel,record mode→
clickk search→theen can view playback
file.
Warrm prompt:
1. IIIustration fo
or playback button:
play,
pause:
fast forward *2,*4,*8；
2. Play file: Cho
oose the reco
ording file in file list,as nu
umber“1”sshown in piccture. Choose
e one
of the record
ding, click “p
play”to playy to recordingg file;
3. Video backup: Choose th
he recording file in file lisst,as numberr“1”shownn in picture.insert
the U flash disk, click “video backup”
”to backup the
t file;
4. Timeline: Click “date”a
and “time”
”at left bottom to check
k the timelinee of recordin
ng, as
number“2”
”shown in picture;
5. On the timeline with reco
ording file,leftt click the mo
ouse, the can playback thee file.
Vid
deo Backup
Usee U disk to
o copy vide
eo,so easyy and convvenient!
1、22 USB ports: Plug U flash disk
d into the USB port of NVR.
Right click on main m
menu→Video
backkup→choose backup chan
nnel→choosee video mode
e→setup searching time→
→search→cho
oose
reco
ording file on the list→video backup (s upport 32G U flash disk at
a max. Recorrding file is
packked one hourr per time.)
2、1 USB port: Riight click on main
m menu→
→video backup→choose backup
channnel→choose video
mod
de→setup seaarching time→search→chhoose record
ding file on the list→videoo backup, inse
ert U
flash
h disk within reminding 1 minute, thenn the system will
w backup re
ecording file to U flash dissk.
Vieew On PC Via
V IE(Inte
ernet Explorer)
1、W
When your PC is in same LAN
L with the NVR（normally means th
hey are conneected to the same
routter）
Step
p1.Find the IP address an
nd port# of yyour NVR(IP address can be found inn System Setup→
Netw
work Setup).
Step
p2.Enter the NVR’s
IP ad
ddress in yourr IE browser for
f example: http://192.11.1.7(If the de
efault
WEB
B port 80 hass been changed e.g. to 1000,you’ll need to add new port numbber when inp
put IP
addrress in the brrowser, for exxample: http:://192.168.1..7:100).
2、W
When your PC
P is out of local area nnetwork with
h the NVR(Fo
or example: view your home
cameras from your office PC).Access with D
Device Cloud
d ID
Step
p 1. Open you
ur Internet Exxplorer(IE) broowser and vissit:www.e‐se
eenet.com.
Step
p2. Input Device ID, User name
and passsword to loggin.
(Devvice ID can be found at the right bbottom corne
er of the NV
VR monitor, status should be
“ONLINE”, default User name is “admin”, aand default Paassword is em
mpty.)
Vieew On Mo
obile
1、D
Download thee APP “IP PRO
O3.0”
Userrs can use cellphone to sccan the QR coode below to
o install the APP
A free of chharge,or users can
searrch “IP Pro 3.0”on
APP store or Googgle Play then install the APP .
Notee:For IOS systtem,it require
es IOS 8.0 verrsion or abovve.For android
d, android 4.44 or above.
2、A
Add the NVR system to yo
our APP devicce list
Run the APP “IP PRO”,
login with
w your accoount or choosse Trial→Click“+”to “A
b ID”
Add device by
（fin
nd it the NV
VR’s Networkk setup, or rright bottom corner on screen),Descr
ription(e.g. Home
Cam
mera), User naame (default user name iis “admin”)an
nd password(default is em
mpty)→Subm
mit to
get b
back to your device list→C
Click the deviice to view th
he cameras.
Tips: if you’ve sett a password on your NVR
R system, pleaase update yo
our passwordd on APP to view.
Playback On Mobiles
In th
he IP PRO AP
PP，while viewing live vvideo of the system, click
k Playback, yyou will enter the
remote playbackk menu. The APP
A automattically playbaack camera 1, you can sw
witch channels the
CH.
Tips: Videos in playback are HD@real
timee which requ
uires very goo
od transmissiion condition
n. We
sugggest to playbaack in LAN. Remote
playbback out of LA
AN may not 100% work ddue to connection
& neetwork condittion.
MEENU‐DO What
Meenu bar
Clickk right button
n you can entter the main menu; click right button again you ca n exit the current
men
nu or return.
Splitt screen: chaange status of
o live view. YYou can choo
ose to view multiple
cameeras or any single
camera.
Videeo Manage: manage
IP cameras and NV
VR channels.
System setup: all system settings.
Videeo playback: playback reco
orded videoss.
Videeo backup: baackup recorded videos.
Colo
or adjust: adjust the image
e setting of e ach camera.
Man
nual record: shortcut
to ch
hange the reccord settings..
Volu
ume: Adjust volume
of aud
dio cameras(w
works only fo
or audio came
eras).
Setu
up Wizard: steep by step gu
uide of 1st tim
me general se
ettings.
Fast Network: sh
hortcut to nettwork settinggs.
Wifi add: add IP cameras into
o NVR channeels wirelessly.
Adju
ust channel: adjust
the ord
der of the NV
VR channels.
Exit System: logo
out, reboot, close screen ooutput and sh
hut down the
e system.
Sysstem Setup
Clickk right button
n→Choose Syystem setup;; you then sh
hall enter the menu that eenables you to
t do
all seettings relateed to this systtem.
 General setup(This enab
bles you to seet)
Langguage
Timee
Disp
play resolution
HDD
D informaion
 System adm
min(This enab
bles you to seet)
System version
System maintenaance including system upggrade
Userr and passwo
ord managem
ment
Resttore to default settings
System log
 Record setu
up(This enables you to sett)
Reco
ord plan for each
channel video detecttion
 Network settup(This enables you to seet)
All network relaated settings
 Channel settup(This enab
bles you to seet)
Man
nage channelss and camera
as
Add
d wirelesss camera
Befo
ore leaving faactory, NVR kit is already m
matched code, the image will come ouut when the kit is
pow
wered. Anywaay, there is range limitatioon for the WIFI signal from
m NVR. Whenn cameras are
e out
of th
his range, they can’t be connected
too NVR wirelessly. Then ussers can use network cab
ble to
conn
nect camerass and NVR, as picture show
wed below:
Step
p 1: plug NV
VR and cam
meras to pow
wer, after NVR
N start, right click moouse→Wifi add
→m
match‐code interface, NVR will search camera unde
er matchinng code model
auto
omatically.
Step
p 2: wirelesss camera has
h two kinnds, includiing camera with RJ45 connector and
cam
mera withou
ut RJ45 conn
nector, theirr way to maatch code ass below:
① for camera with RJ45 connector,, after startt, use network cable tto connect with
R, match code automattically, no n eed to resto
ore.
NVR
② for camera without RJ45 connecttor, after staar, hold the bottom lin e of cameraa for
de automattically, no need
10 sseconds to get in mattch code m odel, it will match cod
netw
work cable..
Step
p 3: when you
y can find
d IP addresss of cameraa on screen,, matching ccode complete,
clickk “Exit” to finish.
Nottes: for cam
mera withou
ut RJ45 connnector, its process
of getting
into matching code
will last 10 minuets. Afte
er 10 minueets, please restore cam
mera to gett into matcching
code model again.
Exttend WIFI Range
Wireeless connecttion is easy and
a convenieent, but it’ss not universal applicationn. Because of
o the
charracter of WIFI, the WIFI signal will ddecrease wh
hen going through some obstacles. Some
methods can be applied
to byypass obstaclees and extend WIFI range.
1、Position The Anten
nna Correectly
WIFI range is likee an apple and
d the antenn a of NVR is in
n the center of
o it. WIFI signnal is strong all
und the WIFI range. Anten
nna of NVR shhould be put straight up, if not, WIFI siignal will be weak.
arou
Acco
ording to the signal transm
mission charaacter of anten
nna, the antenna of camerras should
overrlap or paralleel to NVR WIFI range, as ppictures show
wed below:
2、Use Ante
enna Exten
nsion Cord
d to prolo
ong WIFI distance
Instaallation meth
hod of antenn
na extension cord
Notees:When WIFFI signal is not strong enouugh against walls,users
can take off thee original antenna
and subtitute an
ntenna exten
nsion cord. D
Drill a hole on
o the wall to let the eextension corrd go
thro
ough and simp
ply it where WIFI
W signal is strong.
Sett up cascading conn
nection in
n a reasonable soluttion,extennd wifi siggnal
tran
nsfer distaance
Notee:
1. Reepeater functtion can’t strengthen
WIFI signal for wireless NVR
R kit, but can extend the
distaance by repeaaters ‐‐ WIFI cameras.
2. Only when thee repeater cameras and reepeated came
eras are posittioned correcctly, WIFI
distaance will be extended.
3. Reepeater functtion and 3 meters antennna extension cord
are two methods to eextend WIFI
rangge. Users can choose one according
to real situation
n.
Rep
peater Settup
Step
p 1: Right click on NVR’S GUI,
G left clickk “video management”→ then left cclick “repeatter”
Step
p 2: Add repeater
As p
picture shown
n below, clickk icon + besidees channel 3,, choose othe
er channel.
Step
p 3: As picturee shown belo
ow, it means IPC1 is conne
ected to NVR through IPC22 and IPC3. IP
PC2
is co
onnected to NVR
N through IPC3. IPC3 is connected to
o NVR directlyy.
Step
p 4: Click “Apply” and th
hen click “reefresh” to check
if the se
etting is succeessful.
Dellete Repeaater
Movve the mousee to targeted channels, left
ft click to dele
ete, and then click “Applly” and “O
OK”.
App
plication Example
As p
picture shown
n above, when IPCAM1 is put somewhe
ere is out of NVR
N WIFI rannge, and there is
IPCA
AM2 between
n them with strong
WIFI s ignal, users can
c put IPCAM
M1 close to N
NVR and powe
er it,
setu
up IPCAM1 repeated by IPCAM2, and thhen install IPCAM1 to the presupposedd place.
warning
otes:
No
Devvice will not in
n guarantee if caused by bbelow reason
n:
A.Acccident;negligence;disaste
er; mis‐operaation.
and conditio
B.Do
o not conform to the environment
ons,such as power imprroper, workin
ng
tem
mperature Too
o hight or too
o low, lightninng stroke.ectt.
C.Evver be maintaained by othe
er center whiich not belong to the real factory.
D.G
Goods alreadyy sold more than
12 montths.
FCC
C RADIATION NORM
FCC
This device complies with Pa
art 15 of thee FCC Rules. Operation is subject to tthe followingg two
cond
ditions: (1) th
his device ma
ay not causee harmful inte
erference, an
nd (2) this deevice must acccept
any interference received, inccluding interfeerence that may
m cause undesired operration.
FCC
C Compliance Statement
This equipment has
h been testted and founnd to comply with the limits for a Classs B digital de
evice,
purssuant to part 15 of the FCC Rules. Thesse limits are designed to provide reasoonable protection
against harmful interference
in a residenttial installatio
on. This equip
pment generaates uses and
d can
radiaate radio freq
quency energgy and, if nott installed and
d used in accordance withh the instructtions,
mayy cause harmful interferen
nce to radio communicattions. However, there is nno guarantee
e that
interrference will not occur in
i a particulaar installatio
on. If this equipment doees cause harrmful
interrference to raadio or televiision receptioon, which can
n be determined by turninng the equipment
off aand on, the user is enco
ouraged to trry to correctt the interferrence by onee or more of the
follo
owing measurres:
‐ Reo
orient or relo
ocate the rece
eiving antennna.
‐ Inccrease the sep
paration betw
ween the equuipment and receiver.
‐Con
nnect the equipment into
o an outlet oon a circuit different from that to whicch the receivver is
conn
nected.
‐Con
nsult the dealler or an expe
erienced radiio/TV techniccian for help.
FCC
C Radiatio
on Exposure Statem
ment:
This equipment complies with
FCC rad iation expossure limits set forth for an uncontrrolled
environment. Th
his equipmen
nt should be installed and
d operated with
w minimu m distance 20cm
betw
ween the radiator & your body.
CAU
UTION!
The Federal Com
mmunicationss Commissionn warns the user that changes or moodifications to
o the
unit not expresssly approved
d by the parrty responsib
ble for comp
pliance couldd void the user’s
auth
hority to operrate the equip
pment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2018:10:26 10:12:22+08:00
Modify Date                     : 2018:10:26 10:12:22+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : <4D6963726F736F667420576F7264202D20CEDECFDFCCD7D7B0CBB5C3F7CAE9A3A8D3A2CEC4A3A930363035>
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:e2ff31f8-80d4-440a-9d4a-74c4f03c2845
Instance ID                     : uuid:390a75db-7ebc-42b0-a3af-0693cae52ff6
Page Count                      : 16

EXIF Metadata provided by EXIF.tools