Guangzhou Panyu Juda Car Audio Equipment ASC20 WIRELESS SOUND SYSTEM User Manual 170713c2 TY ASC20 EN

Download:
Mirror Download [FCC.gov]
Document ID	3483698
Application ID	SzRQl2Cm+RrOE9hUXceI8g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	109.9kB (1373695 bits)
Date Submitted	2017-07-27 00:00:00
Date Available	2017-07-27 00:00:00
Creation Date	2017-07-15 09:47:15
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2017-07-15 09:47:15
Document Title	170713c2_TY-ASC20_EN.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	KFB089

TOSHIBA
TY—ASCZO
Portable Sound System
Operation Manual
This product is a splash proof speaker and standar ed as IPX4. The product is not waterproof.
Do not place the product into water. Read the following safety precautions carefully before using
the product.
Thank you for purchasing this Portable Sound System
To use this product safely. read and understand this operation manual thoroughly before using
After reading this manual, keep it in a safe place so that it can be referred to when necessary
50l6700
8 Bluetooth'
Safely precautions
The information you need to prevent danger to the user and other people as well as property damage is described
below, "Description of Signs“ shows different levels of danger or damage that may occur due to wrong handling,
Important notes
tThlS book is only a guidefor user'soperation, not a criterion for configuration
sOnly use attachments/accessories specified bythe manufacturer
The lightning flash is intended to alert the user to the presence of dangerous voltage within the
product‘s enclosure, and touching the internal components may result in a risk of electric shock to
persons
The exclamatory mark is intended to alert the user to the presence of important operating
instructions.
To reduce the risk ofelectric shock or fire, do not open the cover Refer servicing to qualified service
personnel
Description of signs
indicatesthatthereisariskofdeath or indicates that there is a risk of minor
&WARNING seriouswuvy. &CAUT'°N iniuryorpropertydamage
I What to do in the case ofan abnormality
.5top using the device immediately in the case of an abnormality or failure.
,itemove the power plug from the receptacle immediately when water or any foreign obiect
A WARNING enters the interior ofthe device.
it maycause a fire orelectric shock Removethe power plug immediately, and contact yourdealer
fora repair,
I AC adapter
To reduce the risk offire, electric shock or product damage,
. insert the AC adapter plug fully into an AC power outlet.
- If there is dirt or dust on the pins or pin installation surface ofthe AC adapter, disconnect the
Ac adapter and remove the dirt Or dust.
-Do not insertor removethe power plug with a wet hand.
A WARNING .observe the following when handling the power cord ofthe AC adapter.
rDO notdamage it .Do not modify it (eg extension),
~DD notpullit. tDo not placea heavy Object on it ~Do not pinch it.
~DO not bend it forcefully, aDO nottwist it coo not bundle it
-When disconnecting the AC adapter from the power outlet. hold the AC adapter plug while
~ Do not heat it
pulling.
.lfthe device will not be used for a long time, remove the power cord of the AC adapter from
the Ac power outlet.
& CAUTION - Do not use any AC adapter other than the one that comes with the device,
. Do not use the At: adapter that comes with the device for any other product.
I Usage
To reducethe nsk offire, electricshock or product damage,
.oo notdisassemble. repair, ormodify the device.
A WARNING - Do not insert any foreign obiect into the device.
. in case of lightning, do not touch the power cord.
. Before carrying the device. remove the power plug from the receptacle.
. Do not place a heavy object on the device,
.To prevent possible hearing damage, do not listen at high volume levelsfor long periods.
& CAUTION
l Rechargeable battery (Lit ium polymer ion)
To reducethe risk offire, electric shock or product damage,
- Do not attempt to replace the battery by yourself. it is built-in and is not changeable.
.Do not heat, disassemble, or short-circuit the battery. Doing so may cause the battery and
power supply to generate heat, rupture, or ignite.
-charge the battery only in an ambient temperature between 5 and as degrees Celsius.
Otherwise, the electrolyte solution might leak, battery performance might deteriorate and
the battery life might be shortened.
~Do not continue charging the battery it it does not reach full charge within the specified
charging time. Overcharging may cause the battery to become hot, rupture, or ignite.
. Do not expose the battery to excessive heat such as under the sun or near the fire or the like.
Overheat, leakage, or rupture may occur, resulting in burns or iniury.
lfyou touch the batteryfluld, rinse it off with water and consult with the doctor ifthe battery fluid
spills overthe device, Wipe it offwithout touching the fluid
ACAUTION
lfyou leavethe batteryunused for a long period oftime, itwill be in an over dischargestate due to selfdischarge,
and the charging capacity may deteriorate or the battery may be no longer rechargeable. Even if you are not
using the battery,chargethe battery once ortwice a yearfor4 hours each time.
l Installation
To reducethe risk offire, electricshock or product damage,
. Place the device on a flat surface away from sources ofdirect sunlight or excessive heat.
-Do notinstallthe device inaconfined orbulldcln spacesuch asa bookcase orsimilararea,and
AWARNING keep it undera wellcventilated condit‘ n. The ventilation should not be impeded by covering
the ventilation openingswith itemssuch as newspaper, table-cloths, curtains, etc.
~Do not exposethe device to rain, moisture. dripping, orsplashing.
. Do not place objects filled with liquids. such as vases. on the device.
Note
~lf any color shift occurs on a nearby Tv or the radio of the device picks up noise from the Tv, keep the device away
from the TV,
‘l lioilScLTrcASCZILENlhdd l
pk
Important Safety Instructions
Read these Instructlons,
Keep these instructions
Heed all warnings.
Follow all Instructions.
Do not usethis apparatus near water
Clean only with dry cloth
Do not block any ventilation openings install in accordance with the manufacturer‘s instructions
Do not install nearany heat sourcessuch as radiators, heat registers,stoves,orotherapparatus (including amplifiers]
that produce heat
9 Do notdefeat thesarety purpose ofthe polarized orgroundlngctype plug A polarized plug has two blades Wlll'l one
wider than the other, A grounding type plug has two blades and a third grounding prong. The wide blade or the
evmmaww—
third prong are provided foryour safety. ifthe provided plug does not fit into youroutlet, consultan electrician for
to Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exitfrom the apparatus.
11.0nly use attachments/accessories specified by the manufacturer
l2 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the ®
inyury from tlpcover
ia Unplug this apparatus during lightning storms orwhen unused for long periods oftime.
I4 Referall servicing toqualifiedservice personnel Servicing is required when theapparatus has been damaged in any
way, such as powercsupply cord or plug is damaged, liquid has been spilled or obrects have fallen into the apparatus,
15 i: This equipment is a Class ii or double insulated electrical appliance it has been designed in such a way that it
does not require a safety connection to electrical earth,
15 No naked flame sources, such as lighted candles, should be placed on the apparatus
IZAttentlon should be drawn to environmental aspects of battery disposal,
replacement ofthe obsolete outlet.
apparatus When a cart is used, use caution when moving the cart/apparatus combination to avoid
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
IB.The product is designed to use in moderate climates
FCC Radiation Exposure Statement
The devloe has been evaluaIed Io meeI general RF exposure requirement The devloe can be used in
portable exposure condition without restriction
FCC Statement:
This device complieswith Part I5 ofthe FCC Rules. Operation issubiecttothefollowing two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received,
inclu ing interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radiocommunication. However,there is no guaranteethat interferencewill not occur in a particular installation.
lfthis equipment does cause harmful interference to radio or television reception. which can be determined by
turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of
the following measures:
AReortentorrelocatethe receiving antenna.
~|ncreasethe separation between the equipmentand receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consultthe dealeror an experienced radio/TVtechnician forhelp.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
lC-CANADA :
ThlsdevicecomplieswithIndustrytanadalicenseexempt R55standardtsi.operation is subjecttothefollowing
two conditions: (I) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This class [B] digital apparatus complies with Canadian lcEs-ons.
Cet appareil s'accorde avec lndustrie Canada licencecexempte R55 standard. (I) cet appareil ne peut pas causer
l’intervention, et (2) cet appareil doit accepter de I'intervention, y compris I'intervention qui peut causer
I’operation non desiree de,
Cetappareil numerlque de la classe E est conforme a la norme NMB-nos du Canada.
California Prop 65 War 9:
AWARNING This product contains chemtcals, including lead. known to the State of California to cause
cancerand birth defects or other reproductive harm Wash hands afferriaridlirig.
Disclaimer
-Toshiba shall not be responsible forany damage caused by an earthquake, thunderstorm. flood damage. fire
for which Toshiba is not responsible, acts of a third party, other accidents, or damages caused by the user‘s
willful acts or negligence, misuse, or use in abnormal conditions.
eTDshiba shall not be responsible forany damage caused byf ieto observethe information described inthe
operation manual.
Disposal
.when disposing ofthe device, observe the laws, or ordinances and rules ofthe local government.
.This product contains a bulllcln lithium ion rechargeable battery. There is a risk of iniury due to fire, explosion
or leakage if the battery is not used, handled, replaced or disposed of properly. Dispose of the battery as
required by local ordinances or regulations. Do not disassemble, crush or expose the battery to fire or high
temperatures.
I About water resistance
To usethis device,
~ Do not place the device into hot or cold water.
- Do not pour large amounts ofwater onto the device,
. Do not spray with water intensely.
. Do not place the device into hot or cold water with soap, detergent, or bath agent.
. Be sure the covers for the connecting terminals are closed firmly when you use the device.
The rubberseals ofthe covers are made for water resistance Do not let the rubberseals become
dirty or scratched if any foreign obiects are attached to the rubber seals, wipe them with a clean
dry cloth in a dry place
-Do not open or close the covers forthe connecting terminals in a location wherethey will be
subiect to wateror high humidity.
. if the device falls into water or is covered with large amounts of raindrops or water, use a dry
cloth to wipe it immediately,
Open and close the covers for the connecting terminals with dry hands in a dry place after the
water has been wiped offsufficientlyfrom the device.
-Water may remain within the device after It has been wet. Shake the water off the device
lightly and wipe the device.
lfwater remains wnhin the device and the device is carried around,your clothes, floor, or bed may
become wet due to water dropped from the device
& CAUTION
The degree or protection against water for this device is equivalent to |PX4 th code).
IPXA means the product will not be harmfully effected by droplets from any direction.
Toshiba shall not be responsible for any damage caused by water entering the device due to
incorrect handling and it will not be covered by the warranty even if the warranty period is
still in effect.
About using Bluetooth‘
This unit is designed for use with Bluetooth’ wireless devices compatible with the AZDP and AVRCP streaming audio
profiles Refer to your Bluetooth' device's user manual or technical support to determine ifyour Bluetooth“ device
supportsthese profiles
I Frequency band used
This unit uses the 2.4 GHz frequency band however other wireless devices may use 2 4 GHZ frequency band as well
and may cause interference with each other To avoid interference, please refrain from the use ofthe unlt at the same
time with otherwireless devices
I Certification of this device
This unit conforms to frequency restrictions and has received certification based on frequency laws, so a Wireless
permit is not necessary.
However, the followmg action is punishable by law in some countries-
.Taking apart/modifying the unit
I Usage restrictions
szreless transmission and/or use With all Bluetooth" equipped devices is not guaranteed
-A device featuring the Bluetooth' function is required to conform to the Bluetooth‘ standard specified by Bluetooth
Sit}, and be authenticated, Even ifthe connected device conforms to the above mentioned Bluetooth’ standard, some
devices may not be connected or work correctly, depending on the features or specifications ofthe device
I Range of use
Use this device Within an unobstructed in m range. The range ofuse or perimeter may be shortened depending on any
obstructions, devices causing interference, other people in the room, orthe construction ofthe building. Please note
that the range mentioned above is not guaranteed
Basic functions
I Turning the unit on/off
1 Press and hold the (Dbutton to switch the unit on/off.
I Changing the function mode
1 Press the FUNCTION button to choose the USB/TUNER/LINE IN/Bluetooth‘ function.
l Adjusting the volume
1 Rotate the VOLUME knob to increase or decrease the volume.
USB operation
I Listening to a USB device
This unit provides a usa port for music playback
1 Press the FUNCTION button to select the USB mode.
"USb" blinks on the dlsplay
2 Connect a USB memory stick to the USB port.
The display shows the total number of playable folders and files on the USB device
3 To start playback, press the DH button.
The elapsed time of the track is shown on the display
The Bluetooth‘ word mark and logos are Owned by the Bluetooth SIG, lnc and are used under license
Pa names
Toppanel
W W w W
© © 1
t ® |
~e w
, ...- no |
2 3 4 5 6 7 8 9 ID 11
Rearpanel
4 To pause and resume playback, press the bll button.
while paused, the elapsed time ofthetrack blinks on the display
5 To select a desired track, press the FDI or l« button while playing until the desired track appears
on the display.
The unit starts playing automatically.
Notes
~Tolump to +/, II) track, press the »I or I«button whlle paused,
~To selectfolder, press and hold the »l or |«buuon while paused untll the deslred folder appears on the display.
6 To Search for a particular passage during playback, press and hold the »l or I44 button to fast
forward and fast backward until the desired point (passage) is reached, then release the button for
normal playback.
Playbackstarts again from this point.
Caution
To prevent harmful interference, always connect USB device dlrectly to the unit, Do not use a USB extenslon cable
to connect USB device to the unit.
Bluetooth‘a operation
1 Press the FUNCTION button to select the Bluetooth' mode.
"bt" blinkson the display,
2 Following the instructions in your device's user manual, activate Bluetooth“ on your device and
Search for the unit "TYcASCZD" and connect. Input the password "0000" if required.
"bt" is shown on thedisplay
3 Control playback with your device.
4 Rotate the VOLUME knob or adjust the Volume on your device to increase or decrease the volume
as desired.
Information
-The last connected device is automatically paired when in range.
Notes
> Press and hold the FII/ PAlR button to disconnect the Bluetooth‘
The Bluetooth' works best wIthIn IO meters.
~ ln Bluetooth' moder "VII / PAIR,", "VOLUME", etc, are also actlve
LINE IN operation
Press the FUNCTION button to select the LINE mode.
"LlnE“ is shown on the display,
llell llell lUl l
l lfll lfll lflll
13
Display
USB port
LlNE IN jack
MlC jack
0) (POWER ON/OFF) button
V “PLAY/PAUSE) / PAIR button
l«(PREVIOUS) / FOLD/107 button
»| (NEXT) / FOLD/10+ button
FUNCTION button
Microphone volume knob
VOLUME knob
HAND shank
Micro USB Charge Socket DC SV input
Charg g the battery
This unit has a builtcln lithium polymer ion rechargeable battery
1 Connectthe Micro USB Charge Socket Dc 5v inputon the rearofthe unit and the AC adapter using
the USB charging cable.
2 Connect the AC adapter to an Ac power outlet.
ththéwMu
a:=‘
Note
~To Checkthe battery level, press thetbbuttan in the power on mode it showsthe currentbattery capaclty level (such
as 25. so. 75 or 100) on the display.
so
2 Connect your audio device to the LINE leack using an audio cable.
3 Rotate the VOLUME knob or adjust the volume on the external device to increase or decrease the
volume as desired.
4 Control playback with your audio device.
TUNER operation
I Listening to FM
1 Press the FUNCTION button to select the FM mode.
"tUn“ is shown on the display, then the FM frequency is shown on the display
2 Press the »I or K1 button to tune in the station.
Press and hold the Dbl or K1 button to perform automatic tuning. Tuning stops automatically
when a station is received.
tAutomatlctuning may stop due to reception noise in such a case, perform the automatictuning again
' Automatic tuning preset
Press and hold the >I| button The unitautomaticallytunes in and presets all receivable stations in yourarea up to 30
channels.
' Select the preset radio stations
1 When radio signals are received, press the b“ button.
The preset number is shown on the display
2 Press the »I or l«hutton to selectthe preset number when the preset number is being displayed.
Notes
cFM noise may increase during battery charging. it is recommended to change the direction ofthe set and use ltwith
less noise
MIC opera on
Microphone Input Is available in USE/Eluetooth‘VLlNEclN modes
1 Connect your microphone to the 3.5 mm Mleack.
2 Rotate the microphone volume knob to increase or decrease the microphone volume.
zuii/ui/la l3 ii "if
Maintenance
I Maintenance of the main unit
wipe oiislains lightly With a sofl cloth if a stain is severe, Wipe it off With a cloth dampened With neutral detergent
solution and wrung tightly, and dry itWith a dry cloth
aDo not use benzene orthinner,etc. Db not spray any volatile chemical such as insecticide en the cabinet
When you suspect a failure
Phenomenon
Cause
Remedy
Power does notcome on,
rThe uss charging cable is not connected
to the AC Adapter.
-Check that the usa charging cable is
connected securely
No sound is output
.The volume level 5 low
.Adiust the volume level
The unit does not operate
properly.
AThe unit is being interfered With static
electricity ete
-Swn(h otl and unplug the unit. Then
(owned the plug to the power supply
and much it on again
Note
~The cabinet becomes slightly hot in some parts when the unit has been used for a long period of time, it is not a
fallure.
USB memory section
Playbaektormat MP3
Memory 32M5to 32 GB
Supported memory
U581 ‘l or U581 D
Bluetooth' section
Bluetooth' specification Ver, 2 HEDR
Wireless equipment (lasxilication Class 2
Supported prolile AZDP, AVR(P
Frequency 2 4021480 GHz (2.4 GHz lSM segment]
Service distance Up to lo rn
Terminal
Input/Output 95 3 5 mm LINE INJack,
¢3 5 mm MlCle
General
Splash proof
ll>X4
AC Adapter
Output: D( 5.0 V/2.0 A
lnpul,AC1007240V~,50/6D Hz
Powerconsumption
‘loW
Battery
internal lithium polymer ion battery (zzuu mAh]
Max. output power
leOW
Dimension
Apprax.450 (w) x 310 (H) x 200 (D) mm
Weight
Approx 2 3 kg
Aceessories
AC Adapter, USB charging cable, Operation manual
The specifieatians and appearance may be subiect to moailieation Without prior notice
The label is limited on the rear av bottom enclosure.
_‘ l707l3cLTFASCZUJNlndd 2
TOSHIBA LIFESTYLE ELECTRONICS TRADING CO.,LTD.
1+8, Sotokanda, Chiyodarku Tokyo 10170021, Japan
zull/ul/la l3 ll “’7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : KFB089
Create Date                     : 2017:07:15 09:47:15+08:00
Modify Date                     : 2017:07:15 09:47:15+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : 170713c2_TY-ASC20_EN.pdf
Creator                         : KFB089
Document ID                     : uuid:3bbc9877-d2fc-4619-b67c-8531facf1d1e
Instance ID                     : uuid:1a4b6b14-3520-4235-8eb9-92e20a4897a0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools