Guangzhou Rayer Acoustic Technology BTN1 Bluetooth Speaker User Manual BTN1

Download:
Mirror Download [FCC.gov]
Document ID	2654351
Application ID	KgVQewU/ZjLshsLbFj+VJw==
Document Description	BTN1 User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.76kB (609530 bits)
Date Submitted	2015-06-22 00:00:00
Date Available	2015-06-24 00:00:00
Creation Date	2015-06-01 15:25:31
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-06-01 15:25:41
Document Title	BTN1 User Manual
Document Creator	Adobe InDesign CS6 (Windows)

Owner’s Guide
Bluetooth Speaker: BTN1
High Performance
Bluetooth Speaker
Revision 06012015
Model: BTN 1
Serial No. ________________
CONGRATULATIONS
Thank you for purchasing this Hitachi product.
Please read these instructions carefully.
For additional assistance please call Toll Free
800.HITACHI (800.448.2244)
or visit our website at www.hitachi.us/tv.
Keep this owner’s guide for future reference.
Record the serial number of your
Bluetooth speaker for future reference. This information
is located on the bottom of the speaker unit.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.
CAUTION : TO PREVENT ELECTRIC SHOCK, DO NOT USE THE AC PLUG
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
WARNING: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION: This speaker unit’s battery pack is not user replaceable.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the “E-WASTE/RECYCLE NOTICE”.
CAUTION: • To comply with FCC RF exposure compliance requirements,
a separation distance of at least 8 inches must be maintained
between the speaker unit of this device and all persons.
• This product’s transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
• Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user’s authority to operate this product.
E-WASTE / RECYCLE NOTICE
This product may contain lead and should be disposed or recycled according
to local electronic waste (e-waste) laws. For product recycling and disposal
information, contact your local government agency or www.eRecycle.org (in
California), the Electronic Industries Alliance at www.ecyclingcentral.com (in
the U.S.) or the Electronic Product Stewardship Canada at www.epsc.ca (in
Canada). FOR MORE INFORMATION, call 800.HITACHI (800.448.2244)
(USA/CANADA).
Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference and (2) This device must accept any interference received,
including interference that may cause undesired operation. For questions
regarding this declaration, contact:
		Hitachi America, Ltd.
2420 Fenton Street, Suite 200
		Chula Vista, CA 91914-3556
Tel: 800.HITACHI (800.448.2244)
ATTN: Customer Relations
IMPORTANT SAFETY INSTRUCTIONS
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this product near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Install only in accordance with
instructions in this owner’s guide.
8)
Do not install near any heat sources such as radiators, heat registers,
stoves, or any other apparatus (including amplifiers) that produces
heat.
9)
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10)
Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the product.
IMPORTANT SAFETY INSTRUCTIONS (continued)
11)
Only use attachments/accessories specified by the manufacturer.
12)
Use only with cart, stand, tripod, bracket, or table specified
by the manufacturer or sold with the product (if any). When
a cart is used, use caution when moving the cart/product
combination to avoid injury from tip-over.
13)
Unplug this product during lightning storms or when unused for long
periods of time.
14)
This product does not contain any serviceable or replaceable
parts. Do not attempt to service or repair this product. Opening,
or attempting to service or repair, this product will void the
manufacturer’s limited warranty. If operational problems are
encountered during the product’s limited warranty period, please
contact 800.HITACHI.
15)
Product should not be exposed to dripping or splashing, and objects
filled with liquids, such as vases, should not be placed on the product.
16)
Do not overload wall outlets and extension cords, as this can result in
a risk of fire or electric shock.
17)
Do not push objects through any openings in this unit, as they may
touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid into the
unit.
CONDENSATION
Moisture will form in the operating section of the product if the product is
brought from cool surroundings into a warm room or if the temperature
of the room rises suddenly. If this occurs, the product's performance may
be impaired temporarily. To prevent this, let the product stand in its new
surroundings for about an hour before switching it on, or make sure that the
room temperature rises gradually. Condensation may also form during the
summer if the product is exposed to the breeze from an air conditioner. In
such cases, change the location of the product.
Package Contents
•
•
•
•
Speaker Unit
USB charging cable
3.5mm audio cable
Owner’s Guide
Charging the Battery
1) This battery powered speaker uses an internal rechargeable battery.
2) Important Note: The battery is not replaceable. Do not attempt to
replace the battery.
3) Connect the speaker to a USB port with a minimum 5V/1A rating.
4) Important Note: For the best performance, the first time you charge the
battery please allow the battery to fully charge before using.
(Approximately 2.5 hours)
5) When charging, the power key light will flash to indicate that charging
is active.
6) Playing music while charging will extend the charging time.
7) When charging is complete the power key light will stop flashing.
Product Layout
① Vol+
② Vol-
③Bluetooth Pairing/Hands Free/Play/Pause
④ Power On/Off
⑤ Micro USB
Charging Input
⑥ Reset
⑦ Line In
j Vol+: Increase volume.
k Vol-: Decrease volume.
l Bluetooth Pairing/Hands Free/Play/Pause: See table on
page 11.
m Power On/Off: Short press to power on, long press (press
and hold) to power off. Battery charging and status light.
n Micro USB charging input: Used to charge the speaker’s
battery.
o Reset: Press to power off the speaker if the speaker stops
responding.
p Line In: 3.5mm input for external sources.
10
1 Bluetooth button operation (Pairing/Hands Free/
Play-Pause):
Bluetooth button
Speaker Status
Long press
Bluetooth mode
Disconnect Bluetooth
Speaker Status
Short press
Bluetooth mode with an incoming
call
Answer the incoming
call
Bluetooth mode with a call
End the call
Bluetooth mode & Music playing
Play / Pause
Line In mode & Music playing
Mute
Speaker Status
Double press
Bluetooth mode
Call back
Bluetooth mode with an incoming
call
Refuse the incoming
call
11
2 Playing Music
2.1 Bluetooth mode:
1. Power on the speaker. The Bluetooth button will blink
continuously indicating that the speaker is ready to pair
with a device.
2. On your Bluetooth enabled device search for and pair
with the Hitachi Bluetooth speaker “BTN1”. When
pairing is successful the Bluetooth button will stop
blinking. You are now ready to listen to music on your
Hitachi Bluetooth speaker.
3. If you need to unpair an already paired Bluetooth
device and switch to another device, press and hold
the Bluetooth button until the Bluetooth button starts to
blink. The speaker is now ready for pairing consistent
with step 1 above.
4. When the speaker is powered on, it will automatically
connect to the last paired device.
12
2.2 Line In mode:
When a 3.5mm audio cable is inserted into the LINE IN input,
the speaker will automatically switch to the LINE IN input.
Connect one end of the 3.5mm audio cable to the speaker unit
and the other end to the device you wish to play music from. To
switch back to Bluetooth mode, disconnect the 3.5mm audio
cable.
3 How to clean the speaker
1. Always power off the speaker before cleaning it.
2. Do not use volatile solvents (such as ethanol, rosin, or
toluene solvents) to clean the speaker. These types of
chemicals may damage the speaker.
3. Use a cotton or microfiber cleaning cloth.
4. When cleaning the speaker, do not directly put water
on the speaker’s enclosure. Lightly moisten a cotton
or microfiber cleaning cloth and then gently wipe down
the speaker.
4 Low battery warning
When the battery is low in charge, the speaker will output a
warning sound every 1 minute and the power key will flash.
13
Troubleshooting
The following table contains common problems and
solutions. Please read carefully.
Problem
Solution
The speaker
has no sound
• Make sure the speaker was charged
before use.
• Increase the volume settings on the
source and speaker.
• Make sure the “Line In” cable is correctly
connected.
• Make sure that the audio playback device
is connected and in play mode.
Humming
noise or distorted sound
• Make sure that all cables are correctly
connected.
• Ensure that the device that is connected
to the speaker is not the source of the
humming noise or distortion.
• Replace the audio cable.
Not charging
• Ensure that the Micro USB charging
cable is connected correctly.
• Ensure that the Micro USB charging cable can charge other equipment normally.
• Ensure the USB port has a 1A rating.
14
Bluetooth
pairing fails
• Check that the speaker is in the pairing
state (Bluetooth button is blinking). If it is
not, press and hold the Bluetooth button
(until it blinks) to set the speaker to
pairing mode and pair again.
• Make sure that the “Line In” (3.5mm)
cable is disconnected.
Audio is
interrupted or
breaks up
• Ensure that the speaker and Bluetooth
device to which it is connected are within
33 feet (10 meters) of each other.
• Ensure that there is no obstruction
between the speaker and the connected
Bluetooth device.
Speaker is not
responding
and will not
power off
• Locate the small pinhole marked RESET
located on the right side of the speaker
(under the protective, rubber cover).
Insert a straightened paper clip through
the pinhole and depress the switch
inside. The speaker unit will automatically
power off.
15
Care and Maintenance
• Keep all parts out of reach of children.
• Keep the speaker dry. Precipitation, humidity and other
liquids containing minerals can corrode electronic circuits.
• Do not use or store in dusty or dirty areas.
• Do not store in hot areas. High temperatures can shorten
the life of electronic devices and warp or melt certain
plastics.
• Do not store in very cold areas. Moisture can form inside
the case, which may damage electronic circuit boards.
• Do not attempt to open the case. Non-expert handling of
the device may damage the system.
• Avoid dropping or strong shocks.
16
Specifications
(Specifications subject to change without notice)
Model Name
BTN1
Speaker
1 x 2 inch full frequency speaker, 3W, 4ohm
Frequency response
120Hz-15KHz (+/- 3dB)
Power amplifier
Class D @ 3 W × 1 CH
THD (Distortion Ratio)
< 10% @ 500 mV/1kHz
SNR (Signal to Noise Ratio)
> 75dB(A)
Sound pressure level
83dB ±3dB (500mV @ 1m)
Play mode
Bluetooth/Line In
Charging input
DC 5V,1A (Micro USB)
Battery
Lithium polymer battery/3.7V/1300mAh/4.81Wh
Dimensions
3 (W) x 3 (H) x 1-5/8 (D) inches;
7.5 (W) x 7.5 (H) x 4 (D) cm
Weight
0.4lbs (200g)
Bluetooth version
BT2.1+EDR
Bluetooth Range
10m (Line of sight)
Hands-free
DSP MIC hands-free system
Note: Specifications subject to change without notice
17
IP54
This product has an IP54 water and dust resistant design. It can tolerate
a limited splash of water, but do not let this product be submerged in water or overly soaked. If liquid is spilled onto the surface of this product,
please use a dry cloth or paper towel to wipe it off; if water is immersed
inside the product, please immediately shut it down and contact the
customer service center.
Definition of IP54:
1. IP5X + IPX4 = IP54, the standard definition of these 2 items:
• Dust prevention level IP5X: Prevents harmful dust from accumulating.
• Water prevention level IPX4:Liquid splashing the surface from all
direction will do no harm.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Hitachi is under license. Other trademarks and trade names are those
of their respective owners.
18
800.HITACHI
(800.448.2244)
Monday ~ Friday
9:00 am - 6:00 pm EST
www.hitachi.us/tv
HITACHI AMERICA, LTD., DIGITAL MEDIA DIVISION
HITACHI has made every effort to assure you enjoy trouble free operation from your Hitachi
product. Should you require service assistance with OPERATIONAL, HOOK UP, TECHNICAL
ASSISTANCE OR WARRANTY SERVICE SUPPORT,
please contact 800.HITACHI (800.448.2244).
Please be prepared to submit proof of purchase and/or delivery receipts to your 800.HITACHI
Customer Service Representative. Warranty coverage will be provided in accordance with the
provisions of your Limited Warranty (see the Limited Warranty page in this operating guide).
Pour de plus amples renseignements sur le service durant la periode couverte par la garantie,
sur le fonctionnement ou pour de l'assistance techniquie communiquez avec:
Au Canada: 800.HITACHI (800.448.2244)
Lundi ~ Vendredi
9:00 am - 6:00 pm HNE
Hitachi America, Ltd., Digital Media Division
Customer Service Support
P.O. Box 99652
Troy, MI 48099
customerservice.ce@hal.hitachi.com
19
Limited Warranty
(VALID IN THE UNITED STATES AND PUERTO RICO ONLY.)
LIMITED WARRANTY TERMS AND CONDITIONS. Subject to the conditions and limitations
®
set forth below, this HITACHI Bluetooth Speaker product (the “Product”) is warranted to be
free from defects in materials and workmanship for a period of 1 year starting from the original
date of purchase (the “Limited Warranty Period”) by the original purchaser (“Purchaser”).
During the Limited Warranty Period, if the Product does not work properly due to a defect in
materials or workmanship, Hitachi will, at Hitachi’s option, either: (i) repair the Product with
new or refurbished parts, or (ii) replace the Product with a new or refurbished product with
equal or greater features and functions as the Product. If Purchaser rejects, refuses or
otherwise does not accept Hitachi’s repair or replacement offer, this Limited Warranty shall be
void and of no further force or effect. This Limited Warranty extends to the Purchaser only and
is not transferable. To qualify for coverage under this Limited Warranty, purchaser must notify
Hitachi of a warranty claim during the Limited Warranty Period by calling 800-HITACHI and
must provide a dated sales receipt for the Product.
PARTS AND LABOR: There will be no charge for any replacement parts or labor required to
correct a qualifying defect that arises during the Limited Warranty Period. Any replacement
part used to repair the Product may be, at Hitachi’s option, a new or refurbished part, and such
replacement part will be warranted only for 90 days or the remainder of the original 1-year
Limited Warranty Period, whichever is later.
SERVICE LOCATIONS AND RETURNS: Products must be transported or shipped to a
Hitachi-designated service center (call 800-HITACHI for more information). Hitachi will not be
responsible for any costs of transporting or shipping the Product to Hitachi-designated service
center, but Hitachi will be responsible for the cost of return-shipping repaired or replacement
Product to Purchaser. The purchaser must obtain pre authorization from Hitachi before
shipping any Product to Hitachi for replacement, and Purchaser must ship the Product with all
shipping charges prepaid using the Product’s original box and packaging, including all original
parts, written materials and accessories.
WARRANTY LIMITATIONS: This Hitachi Limited Warranty does not cover: (a) any Product
that has been modified or repaired in a manner not previously authorized by Hitachi in writing;
(b) any Product whose serial number (if any) has been removed, altered, replaced, defaced or
rendered illegible; (c) any defect, malfunction, or failure caused by or resulting from nonauthorized service, maintenance, repair or part replacements; (d) damage resulting from
abuse, misuse, mishandling, neglect or damage caused by exposure to hostile or unstable
operating environments, such as areas containing dust and/or smoke, or in any manner other
than those identified as acceptable in the Product’s Owner’s Guide; (e) damage caused by
power surges, accidents, natural disasters/occurrences or any other events or circumstances
outside Hitachi’s control; (f) any Product used in any manner inconsistent with the safe and
proper set-up, usage and installation requirements and configurations identified in the
Product’s Owner’s Guide; (g) improper opening, tampering with, or modification of the Product
or any Purchaser misadjustments of user-operated controls; (h) any obligation related to the
20
removal of Product from a custom cabinet or other specialized product installation; (i) product
knobs, buttons, switches, batteries or accessories; (j) damage caused by cleaning Product in
any manner other than as specified in the Product’s Owner’s Guide; (j) normal usage or
ordinary wear and tear, including, without limitation, scratches or marks on the Product’s
exterior; (k) any damage to a Product returned to Hitachi or any Hitachi-designated facility for
repair or replacement that is attributable to improper packaging, mishandling or shipping by
Purchaser; (l) any Product purchased or serviced outside the United States (including Puerto
Rico); (m) any Product that has been used for commercial or industrial purposes; or (n) any
Product purchased in non-new or non-factory-sealed condition, such as in “AS IS”,
“refurbished”, “reconditioned,” or “previously owned” condition or any other similar condition.
NO PERSON, AGENT, DISTRIBUTOR, DEALER, SERVICE FACILITY, OR COMPANY IS
AUTHORIZED TO CHANGE, MODIFY OR AMEND THE TERMS OF THIS LIMITED
WARRANTY IN ANY MANNER WHATSOEVER. EXCEPTAS PROVIDED IN THIS LIMITED
WARRANTY, HITACHI MAKES NO EXPRESS WARRANTY REGARDING THE PRODUCT.
FURTHER, ALL IMPLIED WARRANTIES RELATING TO ANY PORTION OF THE PRODUCT,
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY DISCLAIMED BY
HITACHI TO THE MAXIMUM EXTENT PREMITTED BY APPLICABLE LAW. HITACHI SHALL
NOT BE LIABLE TO PURCHASER OR TO ANY OTHER PERSON FOR ANY INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY LOSS OF PROFIT, LOSS OF
DATA, OR DAMAGE TO THE PRODUCT THAT IS ALLEGED TO HAVE RESULTED FROM
ANY DEFECT IN, OR MALFUNCTION OR FAILURE OF, THE PRODUCT BECAUSE SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS
AND/OR THE EXCLUSION OF INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
THE ABOVE LIMITATIONS MAY NOT APPLY TO EVERY PURCHASER. THIS LIMITED
WARRANTY CONFERS SPECIFIC LEGAL RIGHTS, INCLUDING CERTAIN OTHER RIGHTS
THAT MAY VARY DEPENDING ON PURCHASER’S JURISDICTION. THIS LIMITED
WARRANTY SHALL BE GOVERNED BY AND CONSTRUED IN ACCORDANCE WITH THE
LAWS OF THE STATE OF PURCHASER’S RESIDENCE. FOR QUESTIONS ABOUT THE
PRODUCT OR THIS LIMITED WARRANTY, PLEASE CALL 800.HITACHI OR VISIT
www.hitachiserviceusa.com.
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2015:06:01 15:25:31-07:00
Metadata Date                   : 2015:06:01 15:25:41-07:00
Modify Date                     : 2015:06:01 15:25:41-07:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:2041f766-61be-488b-beca-b6a660e6ca56
Original Document ID            : xmp.did:3BEA8F1E6013E411A7F1C3F51AF23F22
Document ID                     : xmp.id:F1FB890FAD08E511B7F3D53FD0D1BA3D
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F0FB890FAD08E511B7F3D53FD0D1BA3D
Derived From Document ID        : xmp.did:F0FB890FAD08E511B7F3D53FD0D1BA3D
Derived From Original Document ID: xmp.did:3BEA8F1E6013E411A7F1C3F51AF23F22
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:06:01 15:25:31-07:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 21
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools