Guangzhou Shirui Electronics RK3288 Android Main Board User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2860774
Application ID	XydcVCEcv8DyR7f+5kwmCg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.26kB (528297 bits)
Date Submitted	2015-12-31 00:00:00
Date Available	2015-12-31 00:00:00
Creation Date	2015-11-13 11:04:05
Document Lastmod	2015-12-24 16:57:25
Document Title	User manual
Document Author:	MICROSOFT

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter module must not be co-located or operating in conjunction
with any other antenna or transmitter.
The modular can be installed or integrated in mobile or fix devices only. This modular
cannot be installed in any portable device.
This End equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
The final end product must be labeled in a visible area with the following:
“Contains FCC ID: 2AFG6-RK3288”.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module.
1 Software Description
The main achievement of the 3288 Module of meeting machine in the main
interface machine android platform optimized display, a variety of entrance
applications systems integration, to achieve a more compact display, also provides
users with a more efficient operation of the inlet.
2 Use Introduction
Open meeting machine into the main interface, as the picture 2-1 shows.
 page upper left corner of the display screen wireless transmission, drop-down
can view information;
 intermediate page displays the current date and time;
 upper right corner of the page displays the current network connection status
and time, network connection status is divided into two kinds of wired
networks and wireless networks, the current state of the icon shows the wired
network.
2-1 Main interface
Click
on the main interface on the left,you can enter the main menu page,
as the picture 2-1-1 shows，the same as the main interface on the right
picture 2-1-3
shows.You can click the
,as the
button on the list into Lynx
Pro,Files,Active,Montage,Eshare,Brower,Setting,Apps.
2-1-2 main_left
2-1-3 main_right
2.1 Lynx Pro
Click
on the main interface, you can enter the Software of Lynx
Pro, and edit your work with the Lynx Pro.
2.2 Files
Click
on the main interface, you can enter the files of the
system. And then you can manipulate files, Such as opening files, manage folders, etc.
2.3 Active
Click
on the main interface, you can enter the page of
Background application switching and cleanup, such as the picture 2-3-1 shows. Click
the active you can switch current application software. Slide up or down you close the
active.
2-3-1 active
2.4 Montage
Click
on the main interface into Teleconferencing. You can
have a meeting with people far away.
2.5 Eshare
Click
on the main interface, you can remotely operate this
meeting machine.
2.6 Browser
Click
on the main interface to open the browser. You can
browse the web resource with the browser.
2.7 Setting
Click
on the main interface into the page of setting the system.
2.8 Apps
Click
on the main interface into the page of apps, as the picture
2-8-1 shows.
2-8-1 apps
2.9 Switching desktop background
In the main interface, long press to bring up the desktop background switches, as
the picture 2-9-1 shows.
2-9-1 Switching Background
For example, the following effects occur after the application is selected on a
black background as the picture 2-9-2 shows.
2-9-1 black background

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : MICROSOFT
Create Date                     : 2015:11:13 11:04:05+08:00
Modify Date                     : 2015:12:24 16:57:25+08:00
Has XFA                         : No
Language                        : zh-CN
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2015:12:24 16:57:25+08:00
Format                          : application/pdf
Creator                         : MICROSOFT
Title                           : Meeting 2009是由CVTouch独立开发的基于触摸屏设备的应用软件，将一系列常用的会议功能和教学功能集成于操作简单
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:1dd85b35-9007-403b-bdcd-ce3f0e560e20
Instance ID                     : uuid:eab4a807-c1bd-4c19-94b7-e401ecb23c20
Page Count                      : 7

EXIF Metadata provided by EXIF.tools