Guangzhou Tendystar Telecom TDS-602S BLUETOOTH HEADSET User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	870100
Application ID	/sgHE5QFpCXXFOMDgmc7dQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.73kB (46635 bits)
Date Submitted	2007-11-19 00:00:00
Date Available	2007-11-19 00:00:00
Creation Date	2007-11-10 10:50:29
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-11-19 13:57:42
Document Title	Microsoft Word - 602说明书文字.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	dendy.huang

Manual Of TDS-602S
Introduction
The Bluetooth technology is a standard for wireless short
distance radio communications.
Devices like headset, mobile phone or PDA can communicate
with each other without wires within approximately 10 meters.
The TDS-602 headset is a wireless headset based on the
Bluetooth technology.
It supports two profiles: Headset profile and Hands-free
profile.
It will work with all qualified Bluetooth devices (including
headset and PDA) that support the Headset profile or Handsfree profile. It also will allow you to take a call and adjust the
volume without touching your mobile phone.
Attentions:
1、For the first using or reusing after a long leave, energy of
the battery is very low. In this case, the LED indicator will
not flash until 10-15 minutes' charging.
2、In order to get the best sound; please adjust the Mic close
to the mouth.
Charging
At the first use, it is suggested to charge the headset for 8
hours at least. After that, it is suggested to charge around
2-3 hours every time.
During charging, the LED indicator flashes in red and blue
alternately. When charging finishes, the LED indicator
flashes in blue only.
Be sure to charge the battery with the supplied charger.
Charging time should be less than 12 hours.
When energy of the battery is extremely poor, LED indicator
will not flash in blue at the beginning of charging.
Wearing the headset
Being with a soft and supple earplug, TDS-602 is very earfriendly. When hear a call with it, just insert the earplug into
an ear.
Turning the headset on
Keep pressing the TALK button over 2 seconds, and the
LED long-twinkles in blue for about 3 seconds, then the
device turns on.
Turning the headset off
Keeping pressing the TALK button of a working TDS-602
over 5 seconds, and the LED goes out after a 2 secondtwinkles, then the device turns off.
Pairing the headset
Pairing is the connection between two Bluetooth devices to
exchange data. The operation process as follows:
1. o initiate the pairing, put both the headset and the mobile phone within 1 meter from each other.
2. Make sure you headset is fully charged.
3. Press and hold the multifunction button until the red and blue indicator light flashes red and
blue alternatively.
4. Follow the phone instruction, active the Bluetooth function on your mobile phone.
5. Active the discover mode on your mobile phone. And select “TDS-602” character.
6. Follow the mobile phone instruction, input the PIN code “0000”, and press ”OK” to complete
the pairing. When the pairing is complete, the red and blue indicator light will flashing in blue for
5 times, and you will hear a long “beep” from the speaker.
7. Press “Enter” to return to the main menu of your mobile phone. Now you can ready to use your
headset to make or receive calls.
Caution: If the Pairing is not finished within 2 minute after you start the pairing mode, the
red and blue indicator light will flashing in blue, and you can hear a “deep” from the
speaker. Please pairing the headset with your mobile phone again by repeat step 2-7.
Making a call
If your mobile phone is featured with voice recognition
function and the phone number is recorded on the contact
list of mobile phone, you can make a call directly from the
headset. Press the TALK button and speak the contact
name you want to call.
Make sure the voice tags have been recorded into the mobile phone.
Redial the last number
Double click the TALK button and keep pressing it for over
2 seconds, release the button until you hear a beep.
Ending a call
To end a call, press the TALK button during a call.
Hearing a call
When a call comes, the LED will twinkle continually. Press
down the TALK button to hear the call. The LED twinkles
2 times continuously once the call gets through, then, it
twinkles once every 12-15 seconds.
Rejecting a call
When a call gets in, double press the TALK button, the call
is refused.
Adjusting the volume
Press upside of the lateral button, volume increases, while
press the downside of it, volume decreases.
Muting the volume
During talking, press the TALK button, the earphone gets into
mute. Press the TALK button again, voice status resumes.
Transferring calls
During a call, press the TALK button for 5 seconds to the call
will be transferred to mobile phone.
The above function is available only after the
headset is paired with the mobile phone.
FAQ
After pairing, sometimes, you couldn't use the Bluetooth
headset with your mobile phones, such as Nokia Mobile
phones with S60 system and Sony-Ericsson mobile
phones, you need to pair them again and build connection.
Sometimes, you couldn't find the Bluetooth Headset on
your mobile phones. Please re-charge Bluetooth headsets
or mobile phones.
The connection breaks in the following situations:
1. Poor power in the mobile phone or headset.
2. The distance between mobile phone and headset is
more than the operation range.
3. Too much environmental interference (such as
electromagnetism, electric wave or object obstruct,
etc).
At the first use or energy of the battery is extremely poor,
the LED indicator will not flash. After 2 hours charging, the
LED indicator will work.
Specification:
1) Bluetooth Core：CSR
2) Version：V2.0 Class2
3) Transmission distance: 10 meters
4) Point to point pairing
5) Weight：8G
6) Standby：160 hours
7) Continuously Talking Time:6 hours
8) Charging Time：2hours
9) Code： 0000
10) Battery： Chargeable Li Battery（75mmA）
11) Adaptor： 5V DC 100-240V AC with adaptor
12) Working Temperature： -10 - 55°C
13) Storage Temperature： -20 - 60°C
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Notes:
The manufacturer is not responsible for and radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:11:10 10:50:29+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:11:19 13:57:42+08:00
Metadata Date                   : 2007:11:19 13:57:42+08:00
Format                          : application/pdf
Creator                         : dendy.huang
Title                           : Microsoft Word - 602说明书文字.doc
Document ID                     : uuid:c53b76d5-32ee-4f39-afc2-c26a88eaf4cf
Instance ID                     : uuid:d455001d-d90a-430a-9da3-e27bb5407d63
Has XFA                         : No
Page Count                      : 4
Author                          : dendy.huang

EXIF Metadata provided by EXIF.tools