Bio Assembly Bot User Manual

2018-05-10

• Important Information
  • Proprietary Information
  • Warranty
  • Trademarks
  • Patents
  • Copyright
  • Copyright Notice
  • Disclaimer
  • License Agreements
• Table of Contents
• Other Documentation
• About BioAssemblyBot™
• Safety
  • Notation
  • Assembly and Maintenance Safety
  • Print Safety
• Emergency Features
• BioAssemblyBot™ Hardware
• BioAssemblyBot™ Tools
• TSIM™ Installation
• BioAssemblyBot™ Human Machine Interface (HMI)
  • Status Screen
  • Print
    • Load Materials
      • Tools
      • Load Pick And Place Towers
        • Manual Placement:
        • Automatic Placement:
      • Load Material Screen And Tools
    • Printing
  • Control
    • Move
    • Other
  • Calibration
    • Stage Level
      • To level the stage:
    • Displacement Sensor
      • To calibrate the displacement/distance sensor:
    • Tip To Stage Offset
      • To set Tip To Stage Offset:
    • Storage Bays
      • To calibrate a storage bay:
    • Light Heads
      • To calibrate a light head:
• Troubleshooting and FAQ
  • When should I do the Tip to Stage Offset calibration?
  • When should I do the Light Head calibration?
  • The HMI controls are disabled and/or I can’t hit Start or Confirm to begin a print?
  • Tool retrieval or tool return failed repeatedly?
  • The robot arm is stuck in a bad position. How do I resolve it?
  • The robot arm is stuck in a bad position. How do I resolve it?
  • How do I resolve a misfeed/incorrect height on a well plate in a Tower?
  • Well plate pickup failed repeatedly?
  • My well plate moves slightly when the Pick and Place tool places it?