H3 SYSTEM H3G-700 GSM/GPRS Gateway with Buuetooth User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1420433
Application ID	L/rTxsT2DEL0tPcZsw3R8g==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.3kB (241221 bits)
Date Submitted	2011-02-24 00:00:00
Date Available	2011-03-11 00:00:00
Creation Date	2010-12-23 11:51:10
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2010-12-28 20:50:47
Document Title	Microsoft Word - GPRS Gateway_H3G-700_ Instruction_101222_.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	User

GPRS Gateway Instruction
H3 System Co., Ltd
Print: 4th of Oct. 2010
Version: R0.9
Item: GSM/GPRS Gateway

No.
Date
Version
1st OCT.2010
R0.8
4th OCT.2010
R0.9
Content
Author
Manho Kim,
Jongbo Lee
-Additional Content1. D/C SW Installation
2. Thermometer Pairing
Manho Kim,
Jongbo Lee
1. Gateway Installation
1) Unscrew and open the bottom cover. And
insert a simcard.
2) To configure, connect a serial cable between a
gateway and a PC and run the configuration
software. And power on the gateway.
①
Start command is transmitted from a gateway

to configuration software.
If there is any expected response from PC, communication for set-up mode is on.
Otherwise, regular log is transmitted from the gateway to the configuration software.
a.
Check ‘setting’ in the configuration software:
The set-up mode is activated and
log is also transmitted to the configuration software.
b.
Uncheck ‘setting’ in the configuration software: Only log transmission is activated.
2. Pairing
1) Power off.
2) Select the pairing switch and power on.
①
N: Normal mode (No pairing)
②
P1: Pairing as a slave. Used for A&D weight
scale.
③
P2: Pairing as a master. Used for IEM B/P
monitor, J&J glucometer and ForaCare thermometer.

* After pairing is done, it turns to normal operation mode.
2 ) LED
①
On pairing, Reading LED in GREEN is on.
②
At the success of pairing, Reading LED blinks GREEN two times.
③
At the failure of pairing, Reading LED blinks RED five times.
4) Device pairing method
①
A&D weight scale: Select P1 and measure a weight with the device
②
IEM B/P monitor: Select P2 and change into the pairing mode
③
J&J glucometer: Select P2 and change into the pairing mode
④
FORA thermometer: Select P2 and measure a temperature with the device
3. D/C Software Installation
1) Copy ‘DataCollection(GPRS)’ in the PC and run ‘GPRS_Server.exe’ file.

1) Description
① Port : Set the receiving socket port of DataCollection Server.
② Start: Start server
③ Stop: End server
④ Clear: Clear the log screen
2) Xml, log File
① Data and log folders are in DataCollection folder.
② Data : In data folder, xml file is created as folder by date, and in the xml file
folder , the data is created by time.
③ Log: In log folder, log file is created as folder by date, and in the log file folder,
the log file is created by time.
④ Ex) xml file name : 20101004194422_1111111111.xml
-Creation logic of xml file name : Datetime + gateway Serial no
⑤ Ex) log file name : 20101004194422156.log
-Creation logic of log file name : Datetime
4. Measurement & Data Transmission
1) After a measurement, the data is transmitted to the gateway by Bluetooth .
And the data is automatically transmitted to the server via mobile networks.
2) Time set-up
①
Gateway time set-up
a.
A gateway time set-up is done at the beginning of the server access.
b. A gateway time set-up is done before disconnecting the server access.
②
Device time set-up
a. A&D weight scale, A&D thermometer, J&J Glucometer
- Automatic time set-up is taken after sending data by Bluetooth.
b. IEM B/P monitor:
Time set-up should be done in the device manually.
3) Reading LED
①
Starting Bluetooth communication: Reading GREEN led on
②
End Bluetooth communication: Reading GREEN led off
③
At the success of Bluetooth communication: Reading LED blinks GREEN two times.
④
At the failure of Bluetooth communication: Reading LED blinks RED five times.
4) Data transmission to the server
①
Sending LED
a. Starting server communication : Sending LED in GREEN is on.
b. End server communication: Sending LED in GREEN is off.
c. At the success of server communication: Sending LED blinks GREEN two times.
d. At the failure of server communication: Sending LED blinks RED five times.
②
Notification: Server access is taken at power on and power off.
③
Heart beat: Server access is taken every six hours, after power-on.
④
At data receiving from device, automatic server access is taken and data is
transmitted.
⑤
At the failure of server access, reconnection to the server is done periodically.
Period is every hour. (Max. 3 times)
5. XLM File






























Item
Common
Description
serial="1111111111"
GateWay Serial No
dc="0"
Power Adapter Connection Status ( 0 : Connected ,1 :
unconnected)
battery="1.2"
Gateway battery
type="glucose"
Device
(glucose : Glucometer, pressure : Blood pressure
monitor , weight : weight scale)
Glucometer
BP Monitor
Weight
Scale
Thermometer
id="ZHZ306CBY"
Device Serial No
measuretime="20100101001250"
Measurement time
result="103"
Measurement value
unit="0"
Unit (0 : mg/dL, 1 : mmol/L)
model="1"
Glucometer Model (0:Ultra, 1:Ultra2, 2:Mini/Easy)
adapter="1"
Glucometer Adapter (0 : N/A,
sys="139"
Systolic
dia="091"
Diastolic
pul="094"
Pulse rate
result="066.80"
Measurement value
unit="kg"
Unit (kg or lb)
1: BA-100)
battery="2.32"
Battery
otemp=”98.42”
Object Temperature (Body temperature)
btemp=”74.84”
Back-ground temperature (Outside temperature)
unit=”F”
Unit (F : Fhar)
Regulatory Statements to be included in the Users Guide for Sputnik
USA-Federal Communications Commission (FCC)
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by tuning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Caution: Exposure to Radio Frequency Radiation.
1. This device and its antenna must not be co-located or operating in
conjunction with any other
antenna or transmitter. To maintain compliance with FCC RF exposure
guidelines for bodyworn
operation, do not use accessories that contain metallic components.
2. This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2010:12:23 11:51:10+09:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:12:28 20:50:47+09:00
Metadata Date                   : 2010:12:28 20:50:47+09:00
Format                          : application/pdf
Creator                         : User
Title                           : Microsoft Word - GPRS Gateway_H3G-700_ Instruction_101222_.doc
Document ID                     : uuid:10a1e7ec-4b7e-41ef-93f9-be62edfebd28
Instance ID                     : uuid:8769f483-ca6f-4ea0-96c9-7ef8374cbfb6
Page Count                      : 7
Author                          : User

EXIF Metadata provided by EXIF.tools