HANGZHOU CENTURY ESL-T817 Electronic Shelf Label User Manual
HANGZHOU CENTURY CO., LTD Electronic Shelf Label
User Manual
T817 User Manual
Notice:
In order to prevent your ESL system from damage, please read the following
safety guide, and retain the product manual for future use.
Warning
1. Do not disassemble the system hardware
2. The System is a precision electronic product, disassem ble the product m ay
lead to unpredictable consequences; affect the normal work of the system.
3. Avoid contact with sharp item s, the pri ce can be hard to identification if the
screen has too much scratches.
4. Avoid system hardware encounter severe impact or intense vibrations.
5. Do not to delete system software, as it will lead to system failure
6. Avoid high temperature or submerged in water.
7. Keep away from fire, as the high Efficient lithium battery m ay cause
explosion.
Warning
1. Third-party accessories are not r ecommended. If m ay m ake the system
unstable or even cause injury to operator.
2. Always maintain the system by qualified technical personnel
3. If use de sk-mount bracket (accessory), please leave 10cm extra space at the
top, right and left side.
4. Avoid install the product close to any instrument with electromagnetic wave.
5. The product m ay int erference to other RF instrum ents. Those instrum ents
should be kept away, as the interference m ight be unnoticed. Howeve r, the RF signal
of the prod ucts is m uch lower tha n the s afety standa rd. If it is unavoidable to have
other RF instruments close to the product, please consulter a RF engineer for advice.
Basic functions
T817 Label appearance photo
Instructions for use
The ESL tag will work when its battery mounted. It sends a wireless signal to a
receiver every 6 seconds, and the receiver send a response to it if there is price
information in the receiver. The tag receive the price information and show in the
LCD display.
FCC STATEMENT FCC ID: N6K-ESL-T817
1. This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or m odifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed an d used in accordan ce with the in structions, m ay cause harmful
interference to radio comm unications. However, there is no guarantee that
interference will not occur in a particular insta llation. If this equipm ent does
cause harmful interference to radio or television reception, which can be
determined by turning the equipm ent off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.