HANK ELECTRONICS 1110 Foldable fast wireless charger User Manual HKWP1110 10Q 1

HANK ELECTRONICS CO., LTD. Foldable fast wireless charger HKWP1110 10Q 1

Users Manual

User manual Foldable fast wireless chargerParameter specificationIndicating status and protection functionModel:Qi Charging:Input:Output:Transmission Distance:Conversion rate:Dimension:Instructions1. Plug the power adapter into the socket.2. Micro -USB A side connect the power adapter, Micro-USB cable connect the wireless charging pad.3. Blue light is wireless charging indicator light.4. Put the mobile phone which support wireless chargingfunction on the launch plate correctly, indicator lightcharging to green from blue if you remove the mobilephone, it means the wireless charging pad enterstandby mode.5. Foldable wireless charger built -in spindle, the panel andthe activities racks can adjust the angle according to theneed (Angle:0-90 degrees).The charger is controlled by intelligent chip, it can be usedsafety for a long time standby.HKWP1110-10QWPC Qi standard 1.2.35V-2A/9V-1.67A5V-1A/9V-1.1A0-10mm≥72%128*68*12mmAttentionQuick Start GuideNoted:1. Please do not vigorously extrusion or collision.2. Please do not dismantle or put it into fire or water whenthe product is power on, to avoid shot circuit or leakage.3. Please do not use it in severe high temperature, highhumidity or corrosive substance, to avoid damage to thecircuit leakage.4. Please do not put the metal (such as coin etc) on thecharging pad when charging, to avoid damage fromheating.1. LED off light: standby2. LED blue light: charging3. LED blue light flashes 1s, LED green light flashes 1s,then LED blue light goes into the normal chargingmode: Power onIt is import to use a high-quality power supply with at least 1.5A output for paper operation of the Qi wireless charger.LED Indicator light90°RotationAI PlankCharging areaRubberLEDPackage Contents•2-Coils Qi Wireless charger•Micro USB•User manualFCC StatementChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu