HANK ELECTRONICS DWS02W Door/Window Sensor User Manual HKWL DWS02W Usermanual

Download:
Mirror Download [FCC.gov]
Document ID	3701498
Application ID	m+IL/r3sWgITmOz9RIPgdA==
Document Description	User Manaul
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.92kB (611481 bits)
Date Submitted	2018-01-03 00:00:00
Date Available	2018-01-03 00:00:00
Creation Date	2017-12-25 16:01:20
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2017-12-25 16:01:20
Document Title	Microsoft Word - HKWL-DWS02W_Usermanual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Door/Window Sensor User Manual
HKWL‐DWS02W
1. PRODUCT OVERVIEW
HKWL‐DWS02W is a Wi‐Fi wireless Door/Window sensor, you can monitor the
status of your door/window in real time through your smart phone. When it is
triggered, there will be a push notification to your APP to notify of this event
2. PRODUCT FEATURES






Standard 2.4G wireless Wi‐Fi communication technology, two methods for Wi‐Fi
inclusion, EZ and AP;
It reports the event immediately when the tamper button is triggered;
It detects the battery level and reports the electricity values when door/window
sensor or tamper button is triggered after connected to the network;
It is dormant to save power consumption under the normal working condition;
Supports OTA firmware update;
Compliant with CE, FCC and ROHS.
3. PRODUCT STRUCTURE
Latch buttonLED
Sensor body
Button
Tamper button
Magnet
Definition of LED Indicator
In/out of Long press/short press the
the
button
network
In the
Long press/short press the
network
tamper button
Door sensor triggered
Out of the
network
LED indicator turns blue for
0.5s ,then off
LED indicator turns blue for
0.5s ,then off
LED indicator turns blue for
0.5s ,then off
LED indicator turns purple for 0.5s ,
then off
LED indicator turns purple for 0.5s ,
then off
LED indicator blink fast in red
LED indicator blink slow in red
Long press/short press the
tamper button
Door sensor triggered
EZ Mode
AP Mode
Button Instruction
In the network
Out of the
network
Press and hold the button for 5s then release, resume to default
setting , the LED indicator will blink fast in red, then it enters into EZ
inclusion mode
Press and hold the button for 5s then release to switch EZ/AP mode
Note:
1. In the network: Device has been included into the network.
2. Out of the network: Device is in the status of default setting , never configured
Wi‐Fi
4. SPECIFICATIONS
Power supply
Wireless transmitting and
receiving frequency
network protocol supported
Transmitting power
Receiving sensitivity
Vector error
EVM
working temperature
Storage temperature
Relative humidity
2*AAA battery , 3V
2.4GHz—2.484GHz
IEEE802.11 b/g/n
802.11b:20dBm±2dBm@1Mbps
802.11g:14dBm±2dBm@54Mbps
802.11n:14dBm±2dBm@MCS7_HT20
802.11b:‐91dBm@11Mbps 8%PER
802.11g:‐75dBm@54Mbps 10%PER
802.11n:‐72dBm@MCS7_HT20 10%PER
802.11b:≤35%
802.11g:‐28dBm max.
802.11n:‐28dBm max.@MCS7_HT20
‐10－+40℃
‐40－+70℃
8%－80%
5. INSTALLATTION
1) The two paarts of the Door
Window Sensor sh
hould be plaaced in a m
manner such
that when the
t door/w
window is clo
osed, they are
a within 10MM
from
m each otherr. By
opening thee door or window,
Sen
nsor body an
nd magnet should
sepaarate in
proximity.
NOTE:
1. Door Window Sensor should not be mounted directly on or near metal
framing or other largge metallic ob
bjects since metal
objects may weaken the
radio siggnal strength.
2. Door Window Sensor should onlyy be placed in
ndoors and aw
way from watter
and other extreme weather
conditions.
2) Screw the bid
directional mounting
platee and magne
et into the waall, door or wiindow frame..
(presented below
figure)
3) Attach the do
ouble‐sided mounting
tap
pe to the cove
ers and to adhere to the w
wall, door or
window fram
me.
NOTE:
Wipe clean the surrface where the Door Window Sensor w
will be mounted.
Any du
ust and particcles can redu
uce the adhession of doublee‐sided moun
nting
tape.
4)
4) Ensure that thhe orientationn marks of the sensor body and the maagnet are orieented towardds
each other.
’
6. Download app
Scanning following two QR codes to download APP for Android and IOS System
Android IOS
7. Add Devices
7.1 Click“ADD DEVICES”，Select the Device Type“Door Sensor”

EZ mode
7.2 Power on, the red LED indicatorwill blink fast, then enter the EZ mode, click the
"Confirm indicator rapidly blink", and input the Wi‐Fi password, click OK, it will show
“connecting now”. Once it is connected successfully, clickOK and return to the main
interface.
 AP mode
7.3 Power on, the LED indicator will blink fast in red , press and hold the button for 5S
time, then the LED indicator will blink slowly in red. Select AP Mode, click "Confirm
indicator slowly blink", and input Wi‐Fi password, click “Confirm”.
Open the smartphone Wi‐Fi list, select SmartLife_XXXX, and get back when
connected successfully, it will show “Connecting now” then. Once it is connected
successfully, click OK and return to the main interface.
8. FCC NOTICE (for USA)
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that
may cause undesired operation.
The manufacturer is not responsible for any radio or tv interference caused by
unauthorized modifications or change to this equipment. Such modifications or
change could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
Note: The device has been evaluated to meet general RF exposure
requirement. To maintain compliance with FCC's RF exposure guidelines, this
equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - HKWL-DWS02W_Usermanual
Create Date                     : 2017:12:25 16:01:20+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2017:12:25 16:01:20+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:077c6295-2a47-4d75-90ca-b991c8b8382b
Instance ID                     : uuid:71d099d7-634e-4e9b-a778-e0a14318f45f
Page Count                      : 9
Author                          : Administrator

EXIF Metadata provided by EXIF.tools