HANK ELECTRONICS HK901 Wireless Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3558621
Application ID	GShaueacdqYSfrTIGAUDww==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	82.36kB (1029456 bits)
Date Submitted	2017-09-13 00:00:00
Date Available	2017-09-13 00:00:00
Creation Date	2016-09-27 13:45:31
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-08-11 16:19:13
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Macintosh)

FM Radio
Note: The DC/Aux In cable (included) doubles as an
FM antenna. Insert the cable in the DC/Aux In port for
FM reception.
1. Press the Play button to scan for stations. The
speaker will automatically store scanned stations.
2. Use the Volume/Skip buttons to cycle through
stored stations.
USB/Memory Card Play
Insert a USB drive or
Micro-SD memory card
into the appropriate
port. The speaker will
automatically detect the
input and begin playing
audio. Use the on
speaker controls to play,
pause, skip tracks and
adjust the volume.
FCC WARNINGS
• Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
ADDITIONAL WARNINGS
• WARNING: To prevent fire or shock hazards, do not expose
this unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
• Lithium batteries, like all rechargeable batteries, are
recyclable and should be recycled or disposed of according
to state and local guidelines. They should never be disposed
of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local
government for disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known
to the State of California to cause birth defects, or other
reproductive harm (California Prop 65). Wash hands after
handling.
• This product meets and complies with all Federal regulations.
Features
Overview & Controls
Battery Power
• Supports Bluetooth
Initial charge time is approximately 2 hours. Charge
fully before use.
• Wireless range: 60 ft.
1. Using a Mini-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor (not included)
to charge the unit.
• FM Radio
• Built-in microphone for answering phone calls
• Aux In (3.5mm audio input)
• Color changing LED lights
• USB and Micro-SD card readers: supports MP3s
POWER
MIC
SOURCE
DC IN/AUX IN
OFF
USB
• 3.5mm Headphone Jack
• Mini-USB port for battery recharge and Aux In
Microphone
DC Power Port/Aux In
• DC battery power: built-in rechargeable lithium
ion battery
Source
Headphone Jack
• Battery life: approx. 1.5 hrs
Includes
• USB to mini USB Aux/DC charge cable
• User’s guide
Pairing Bluetooth & Playing Audio
Press to switch between
Bluetooth, FM radio or Aux modes.
USB Port &
Micro-SD Card Slot
ON
MIC
When the unit is charging, the LED lights will display
solid red. When the unit is fully charged, the LED
lights will turn off.
Power ON/OFF
Pair/Play/Pause/ Speakerphone
Press and hold to pair to a Bluetooth device.
Press and hold to scan and store FM radio stations.
Press to play, pause or answer/end a call.
2. Press and hold the Play button to begin pairing.
When pairing, remain within 3 feet of the unit.
3. Using the controls on your Bluetooth device,
select ISB07 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password 0 0 0 0 . Refer to the user’s manual for
your specific device for instructions on pairing and
connecting Bluetooth devices.
Requires a 3.5mm to Mini-USB cable (included).
1. Press the Source button to switch to Aux In
Mode. A voice prompt will announce “Auxiliary”
when the unit is ready.
2. Connect the included 3.5mm to Mini-USB cable
to the DC Power Port on the unit and the audio
output/headphone jack on a media player.
3. Use the controls on the connected device to
select and play audio.
4. Use the controls on the connected Bluetooth
device to select and begin playing audio. Use
the controls on the device or the speaker to play,
pause, skip tracks or answer an incoming call.
Insert USB drive or Micro-SD
card to automatically play from
the storage devices.
Skip Track/Volume
Press to change track or stored radio stations.
Press and hold to adjust volume.
1. Press the Source button to switch to Bluetooth
Mode. A voice prompt will announce “Bluetooth”
when the unit is ready.
Aux In
DC IN/AUX IN
After initial pairing, the unit will stay paired unless
unpaired manually by the user, or erased due to a
reset of the device. If your device should become
unpaired, or you find it is unable to connect normally,
repeat these steps.
DC IN/AUX IN

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Create Date                     : 2016:09:27 13:45:31-05:00
Metadata Date                   : 2017:08:11 16:19:13+08:00
Modify Date                     : 2017:08:11 16:19:13+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:49b51baa-4c88-43f6-a701-9a4485c45799
Original Document ID            : xmp.did:03801174072068119109E81DE6DFAE2E
Document ID                     : xmp.id:fbd6a471-bae4-42e8-9a44-d6cb528f17f3
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:eea81ff6-f7ec-440e-87d6-d6c15ce9e175
Derived From Document ID        : xmp.did:15cee1cf-e7d2-4560-afc9-1656bdb78fb9
Derived From Original Document ID: xmp.did:03801174072068119109E81DE6DFAE2E
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:09:27 13:45:31-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools