HANK ELECTRONICS SO07W Smart Plug User Manual HKWL SO07W
HANK ELECTRONICS CO., LTD. Smart Plug HKWL SO07W
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3647525 |
| Application ID | bGEQ2d/7IJI0CKfnQMElbA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 277.85kB (3473166 bits) |
| Date Submitted | 2017-11-21 00:00:00 |
| Date Available | 2017-11-21 00:00:00 |
| Creation Date | 2017-09-05 14:10:17 |
| Producing Software | Corel PDF Engine Version 18.1.0.661 |
| Document Lastmod | 2017-11-21 19:56:33 |
| Document Title | HKWL-SO07W.cdr |
| Document Creator | CorelDRAW X8 |
| Document Author: | Administrator |
Ⅰ. PRODUCT OVERVIEW Ⅴ. PRODUCT OVERVIEW The Smart Plug is a wifi based switch which can be used to on/off control the electrical appliances after paring to the wifi network. You also monitor the on/off status of the appliances through your mobile phone from anywhere as long as you have access to internet. Ⅵ. POWER INDICATOR Power supply: AC 90-135V,60Hz HKWL-SO07W HKWL-SO07WP Power loss: ≤1W Nominal input voltage: 120V OFF: Purple red ON: Blue Ⅱ. PACKAGE CONTENTS Rated current: 15A max Ÿ 1x Smart Plug Ÿ 1x User Manual Storage temperature: -20-60℃ OFF: Purple red 0~300W: Blue 300~600W: Cyan 600~900W: Green 900~1200W: Yellow 1200~1500W: Red 1500~1800W: Purple Ⅲ.PRODUCT FEATURES Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Support WiFi connection Works with Amazon Alexa and Google Assistant Firmware OTA upgrade supported Easy installation, plug and play Timing task settings Supported Over current protection(Applicable only to SO07WP) Operational temperature: -10-40℃ Wireless standard: IEEE802.11 b/g/n Radio frequency: 2.4GHz—2.4835GHz Encryption type: WEP/TKIP/AES,WPS Transmit power: Ⅳ.PRODUCT STRUCTURE Sensitivity: Led Indicator 802.11b:18dBm±2dBm 802.11g:15dBm±2dBm 802.11n:15dBm±2dBm 802.11b:-91dBm@11Mbps 8%PER 802.11g:-75dBm@54Mbps 10%PER 802.11n:-72dBm@MCS7_HT20 10%PER When the Power of the load changes from low to high, the color of indicator will change in cycle as “blue, cyan, green, yellow, red, purple…”. Total 6 grades, 300W each as difference. When the power is over 1800W (6th grade). The indicator will blink in purple and shut off the output in 10 seconds. (Applicable only to SO07WP) Ⅶ. ADD&DELETE DEVICES Scanning following two QR codes to download APP for Android and IOS System Button Smart Plug User Manual HKWL-SO07W HKWL-SO07WP 1.Add Devices • EZ mode The moment the plug is powered, the LED Indicator will be flashing in green. Chose EZ Mode to include the network in the APP. The app will indicate the success when it's included successfully. The LED indicator will be solid in blue. Android IOS • AP mode The moment the plug is powered, the LED Indicator will be flashing in green. Press and hold the button for 5 seconds and then release. The LED indicator will blink slowly in yellow. Chose AP Mode to include the network in the APP. The app will indicate the success when it's included successfully. The LED indicator will be solid in blue. 2. Switching network inclusion modes EZ mode (LED is flashing) is the default inclusion way. When the plug is out of a network, switching the inclusion way from EZ mode and AP mode can be done by pressing and hold the button for 5 seconds and then release. 3. Removing from Wi-Fi network Select the Smart Plug that you want to delete on the APP. Click the icon at the upper right corner. Then click 'Delete' to remove the device from the APP and network, the LED light will be flashing in green. Notes Ÿ The Smart Plug should be used in dry places (Using in bathrooms etc. is not allowed.) Ÿ Please use the Smart Plug in safe environment (Working power higher than 1800W or current higher than 15A are not allowed) NOTE: After the smart plug is included to a network successfully. You don't need to re-include it when it's powered again after a power off. It will connect to the previous network automatically. During this process, it's LED indicator will blink slowly and later becomes solid. Ⅷ. RESET TO FACTORY DEFAULT The way to reset the Smart Plug is press and hold the button for 5 seconds. The LED indicator will flash in green. Ⅸ. FCC NOTICE (FOR USA) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Note: The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Administrator Title : HKWL-SO07W.cdr Create Date : 2017:09:05 14:10:17+08:00 Creator Tool : CorelDRAW X8 Modify Date : 2017:11:21 19:56:33+08:00 Metadata Date : 2017:11:21 19:56:33+08:00 Producer : Corel PDF Engine Version 18.1.0.661 Document ID : uuid:f277e1c8-c50c-466f-8680-42e809a3d804 Instance ID : uuid:d2432d1a-5763-46af-bab4-a99f57225a99 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Author : AdministratorEXIF Metadata provided by EXIF.tools