HARRIS TR-0009-A Panther 300M UHF-H (470-512MHz) User Manual 2000498 Panther

HARRIS CORPORATION Panther 300M UHF-H (470-512MHz) 2000498 Panther

pages 15 of installation manual

14Figure 3 – Factory Default Internal Speaker Jumper Setting (Enabled)Configure the Internal Radio Speaker Jumper (JP701)The PANTHER 300M radio is shipped from the factory with theinternal radio speaker jumper (JP701) set to 1-2 as shown in Figure3. This setting enables the internal radio speaker. Set the jumper to2-3 if 1) only the External Speaker is to be enabled or 2) theInternal/External Speaker option is to be enabled.Configure Ignition Sense Jumper (JP600)The Ignition Sense line is used to enable or disable transmit or carhorn alert option through the vehicle ignition switch. If the IgnitionSense option is desired, Ignition Sense jumper JP600 must be set to2-3. The PANTHER 300M radio is shipped from the factory with theIgnition Sense jumper (JP600) set to 1-2 as shown in Figure 4. Thisdefault setting disables the Ignition Sense option. If your installationwill not take advantage of the Ignition Sense line, skip this sectionand proceed to the next section.

Navigation menu