HARRIS TR-0029-E Land Mobile Base Station User Manual Manual 3
HARRIS CORPORATION Land Mobile Base Station Manual 3
HARRIS >
Contents
- 1. Manual 1
- 2. Manual 2
- 3. Manual 3
- 4. Manual 4
Manual 3
Maintenance Manual MM101418V1 R1A MASTR® E-Net Base Station Application/Assembly Diagrams TABLE OF CONTENTS Title T/R SHELF............................................................... SYSTEM MODULE................................................. POWER MODULE .................................................. Publication LBI-38637 LBI-39176 LBI-38752 TABLE OF CONTENTS TABLE OF CONTENTS Page INTRODUCTION ................................................................................................................................................................. 3 APPLICATIONS ................................................................................................................................................................... 3 APPLICATION/ASSEMBLY DIAGRAMS SINGLE STATION 69 IN CABINET WITH SITE PRO/SIM AA38-HRB 104 26 (SHEET 1)..................................... 5 MULTI-STATION 83 IN CABINET OR 86 IN OPEN RACK WITH SITE PRO/SIM AA38-HRB 104 26 (SHEET 2)............................................................................................................................... 6 MULTI-STATION 69 IN/ 83 IN CABINET OR 86 IN OPEN RACK WITH SITE PRO ASSEMBLED AA38-HRB 104 26 (SHEET 3)............................................................................................................................... 7 CABINET/RACK HARDWARE..................................................................................................................................... 8 ETHERNET HUB AA51-HRB 10426 ............................................................................................................................. 9 SITE SENTRY ASSEMBLY AA52-HRB 104 26........................................................................................................ 10 SIM SHELF AA53-HRB 104 26.................................................................................................................................... 11 MODEM/SITE SENTRY POWER SUPPLY SHELF AA54-HRB 104 26…………………………………… .......….12 GETC/SITE PRO SHELF AA55-HRB 104 26 ............................................................................................................. 13 STATION POWER SUPPLY AA56-HRB 104 26 ....................................................................................................... 14 MASTR III Tx P.A. AA57-HRB 104 26....................................................................................................................... 15 RF CONNECTIONS DIAGRAM FOR R.F. STATIONS CABINET/RACK ID38-HRB 104 26 (SHEET 1)............. 17 POWER CONNECTIONS DIAGRAM FOR R.F. STATIONS AND EQUIPMENT CABINET/RACK ID38-HRB 104 26 (SHEET 2) .............................................................................................................................. 18 DATA CONNECTIONS DIAGRAM FOR R.F. STATIONS AND SIM/SITE SENTRY/SURE CALL EQUIPMENT CABINET/RACK ID 38-HRB 104 26 (SHEET 3) ...................................................................... 19 DATA CONNECTIONS DIAGRAM FOR R.F. STATIONS ONLY CABINET/RACK ID 38-HRB 104 26 (SHEET4).................................................................................................................................... 20 ORION TU SHELF ASSEMBLY AD-SXK 107 3828................................................................................................. 21 MASTR III T.R. SHELF AA02-HRB 104 26 ............................................................................................................... 22 CONTROL EXTENDER BOARD 188D5338G1.......................................................................................................... 23 RF EXTENDER BOARD 188D5338G2........................................................................................................................ 23 GROUNDING STRAP INSTALLATION INSTRUCTIONS ....................................................................................... 24 CABINET GROUNDING……....………………………………………………………………………………………25 SITEPRO GROUNDING INSTALLATION INSTRUCTIONS ................................................................................... 26 19B801454P16 & P17.................................................................................................................................................... 27 19B801454P17 & P18.................................................................................................................................................... 27 19B801454P19 & P20.................................................................................................................................................... 27 19B801454P24 ............................................................................................................................................................... 27 CONTROL CABLE ASSEMBLY (PART OF POWER AMPLIFIER) 19B8017397P1............................................... 27 POWER CABLE (PART OF POWER AMPLIFIER) 19B801937P1............................................................................ 28 19B235871P1 ................................................................................................................................................................. 28 344A3052P1................................................................................................................................................................... 28 PARTS LIST........................................................................................................................................................................ 29 • • • • SAFETY NOTES The means of disconnecting power from a station cabinet is the cabinet power supply plug. When conducting repair/maintenance, disconnect the cabinet power supply plug from the AC source. In European applications, equipment must be installed in a closed cabinet. Only replace components with components specified by M/A-COM Private Radio Systems. This manual is published by M/A-COM Private Radio Systems, Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by M/A-COM Private Radio Systems, Inc., at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of M/A-COM Private Radio Systems, Inc. Copyright 1992-2002, M/A-COM Private Radio Systems, Inc. All rights reserved. MM101418V1 R1A INTRODUCTION & APPLICATIONS INTRODUCTION This manual contains information for the MASTR® E-Net Base Station, including application information, cable diagrams and parts list for the cabinet hardware. For additional information refer to the following manuals: MANUAL NUMBER LBI-38636 TITLE COMMENTS Installation How to install including Interconnection Diagrams. MM101453V1 Installation Installation and configuration of MASTR E-Net Trunked Repeater Site LBI-38754 LBI-38675 VHF RF Package UHF RF Package Information on the VHF equipment. Information on the UHF equipment. LBI-39025 800 MHz RF Package Information on the 800 MHz equipment. LBI-38983 Antenna System Information on typical antenna system installations. LBI-38812 MM101271V1 EDACS Interface Panels Site Pro Information on the panel used in EDACS applications. Information on Site Pro equipment MM101343V1 Site Pro Information on Site Pro equipment installation. LBI-38625 Charger/Emergency power RF Test Fixture Information on the batter charger and emergency power equipment. Information on the RF Test Fixture OPTION NUMBER SXRB1J APPLICATION ASSEMBLY AA02 HRB 10426 DESCRIPTION SXSU3D 19D902845P7 Installation of SOR (Squelch Operated Relay) Kit. SXMIL3S 19D902845P10 Installation of MASTR III auxiliary Receiver in a 69" Cabinet SXVV1N SXVV1M SXVV1S SXVW1J 19D902845P12 Installation of E/D Module (non-1027 version) in a 69" Indoor Cabinet (Aegis Remote/Remote/Repeat MASTR III). LBI-38805 APPLICATIONS MM101418V1 R1A Installation of T/R Shelf for MASTR III Station. APPLICATIONS OPTION NUMBER SXVG3C SXVG3D APPLICATION ASSEMBLY 19D902845P13 SXDE5B 19D902845P14 Installation of E/D module (1027 version) in a 69" Indoor Cabinet (Remote E/D & Remote/Repeat). Installation of Transmit Data Board. SXVT1L 19D902845P26 Modem Voting Installation. SXCP5T 19D902845P27 CNI Installation. SXFN1A SXFA1L 2-Speed Fan (110 VAC). 2-Speed Fan (230 VAC). 19D902845P18 DESCRIPTION MASTR III Reference Oscillator/Distribution Amplifier. MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS SINGLE STATION 69 IN CABINET WITH SITE PRO/SIM AA38-HRB 104 26 Rev. B Sheet 1 of 3 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS MULTI-STATION 83IN CABINET OR 86IN OPEN RACK WITH SITE PRO/SIM AA38-HRB 104 26 Rev. B Sheet 2 0f 3 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS MULTI-STATION 69IN, 83IN CABINET OR 86IN OPEN RACK WITH SITE PRO ASSEMBLED AA38-HRB 104 26 Rev. B Sheet 3 of 3 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS CABINET/RACK HARDWARE AA50-HRB 104 26 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS ETHERNET HUB AA51-HRB 104 26 Rev. C MM101418V1R1A APPLICATION/ASSEMBLY DIAGRAMS SITE SENTRY ASSEMBLY AA52-HRB 104 26 10 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS SIM SHELF AA53-HRB 104 26 MM101418V1R1A 11 APPLICATION/ASSEMBLY DIAGRAMS MODEM/SITE SENTRY POWER SUPPLY SHELF AA54-HRB 104 26 12 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS GETC/SITE PRO SHELF AA55-HRB 104 26 Rev. B MM101418V1 R1A 13 APPLICATION/ASSEMBLY DIAGRAMS STATION POWER SUPPLY AA56-HRB 104 26 14 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS MASTR lll Tx P.A. AA57-HRB 104 26 Rev B Sheet 1 of 2 MM101418V1 R1A 15 APPLICATION/ASSEMBLY DIAGRAMS MASTR lll Tx P.A. AA57-HRB 104 26 Rev. B Sheet 2 of 2 16 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS R.F. CONNECTIONS DIAGRAM FOR R.F. STATIONS CABINET/RACK ID38-HRB 104 26 Rev C Sheet 1 of 4 MM101418V1 R1A 17 APPLICATION/ASSEMBLY DIAGRAMS POWER CONNECTION DIAGRAM FOR R.F. STATIONS AND EQUIPMENT CABINET/RACK ID 38-HRB 104 26 Rev. C Sheet 2 of 4 18 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS DATA CONNECTIONS DIAGRAM FOR R.F.STATIONS AND SIM/SITE SENTRY/SURE CALL EQUIPMENT CABINET/RACK ID38-HRB 104 26 Rev C Sheet 3 of 4 MM101418V1 R1A 19 APPLICATION/ASSEMBLY DIAGRAMS DATA CONNECTIONS DIAGRAM FOR R.F.STATIONS ONLY CABINET/RACK ID38-HRB 10426 Rev C Sheet 4 of 4 20 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS ORION TU SHELF ASSEMBLY AD-SXK 107 3828 Rev. E MM101418V1 R1A 21 APPLICATION/ASSEMBLY DIAGRAMS MASTR III T.R. SHELF AA02-HRB 104 26 22 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS CONTROL EXTENDER BOARD 188D5338G1 RF EXTENDER BOARD 188D5338G2 (188D5338, Sh. 1, Rev. 2) MM101418V1 R1A 23 APPLICATION/ASSEMBLY DIAGRAMS The MASTR III 800 MHz T/R shelf is mounted in the station cabinet using Isolator Kit 350A1350G1, which provides rubber isolators, needed at 800 MHz to dampen vibrations. This kit also provides grounding strap SXA 104 7504/1. This grounding strap is used with the lower isolator on the right rail only. As shown above, this strap (Item 8) slips over each end of the isolator studs with the loop oriented toward the outside cabinet wall. GROUNDING STRAP INSTALLATION INSTRUCTIONS (19B803970, Rev. 3) 24 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS CABINET GROUNDING (19C852352, Rev. 2) MM101418V1 R1A 25 APPLICATION/ASSEMBLY DIAGRAMS SITEPRO GROUNDING INSTALLATION INSTRUCTIONS (19C852320, Rev. 1) 26 MM101418V1 R1A APPLICATION/ASSEMBLY DIAGRAMS 19B801454P16 & P17 (19B801454, Sh. 10, Rev. 27) 19B801454P43 (19B801454, Sh. 23, Rev. 27) 19B801454P17 & P18 (19B801454, Sh. 11, Rev. 27) 19B801454P19 & P20 (19B801454, Sh. 12, Rev. 27) CONTROL CABLE ASSEMBLY (PART OF POWER AMPLIFIER) 19B801454P24 19B801739P1 (19B801454, Sh. 15, Rev. 27) MM101418V1 R1A 27 APPLICATION/ASSEMBLY DIAGRAMS POWER CABLE (PART OF POWER AMPLIFIER) 19B801937P1 (19B801937, Sh. 1, Rev. 2) 344A3052P1 (344A3052, Sh. 1, Rev. 2) 19B235871P1 (19B237871, Sh. 1, Rev. 2) 28 MM101418V1 R1A PARTS LIST PARTS LIST MASTR E-NET SYMBOL PART NO. SDC 122 478/3 19D417623G4 19B226318P2 19B801476P1 19B801476P2 19B209539P1 19B209539P2 19B209539P3 344A3450G21 5490407P29 19C320895G12 19C320895G15 SDC 122 476/1 19A130031G12 19C337428G1 19C337428G2 19B801476P1 19B801476P2 19B209539P2 19B209239P2 19B209539P3 19B226318P2 344A2450P21 19C320895G12 19C320895G15 19B235871P1 19B801454P17 19B801454P20 19B801454P19 19B801454P16 19B801454P43 DESCRIPTION - - - - - - - - - 69" CABINET - - - - - - 69-inch Cabinet. Grill, Label. Plate. Cover. Cover. Lock, rim. Lock, rim. Key, lock, rim. Hardware Kit. Grommet. Fan 120 VAC. Fan 230 VAC. - - - - - - 83" CABINET - - - - - - 83-inch Cabinet. Hardware Kit. Door. Door. Cover. Cover. Lock, rim. Lock, rim. Key, lock, rim. Plate. Hardware Kit. Fan 120 VAC. Fan 230 VAC. - - - - - - CABLES - - - - - - Power Cable: Station Power Supply (J801) to T/R Shelf (A2-P102). RF Cable: Low Pass Filter (J1) to Power Amplifier (J104). Replaced by 19B801454P43. RF Cable: T/R Shelf (J2) to Duplexer Shelf (J2) (Used when Duplexer is installed). RF Cable: T/R Shelf (J2) to Antenna Switch (J2). RF Cable: T/R Shelf (J1) to Power Amplifier (J101). RF Cable: Low Pass Filter (J1) to Power Amplifier (J104). *COMPONENTS ADDED, DELETED OR CHANGED BY PRODUCTION CHANGES MM101418V1 R1A 29 M/A-COM Wireless Systems 3315 Old Forest Road Lynchburg, Virginia 24501 (Outside USA, 434-385-2400) Toll Free 800-528-7711 www.macom-wireless.com Printed in U.S.A.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Producer : Acrobat Distiller 4.05 for Windows Creator : Microsoft Word 8.0 Modify Date : 2002:03:13 09:31:46-05:00 Author : M/A-COM Private Radio Systems, Inc. Subject : Maintenance Manual Title : MM101418V1 R1A, MASTR E-Net, Base Station Application/Assembly Diagrams Create Date : 2002:03:13 09:19:36 Page Count : 30 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools