HARRIS TR-396-A2 GSM Portable Terminal User Manual Exhibit 8

HARRIS CORPORATION GSM Portable Terminal Exhibit 8

UserManual.wiki >

TR 396 A2 User Manual

Exhibit 8

Register your new phone, purchase Ericsson original accessories, and see the latest in products by visiting us at: www.ericsson.com/us/consumerX/99 PBMThis manual is published by Ericsson Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Ericsson Inc., at anytime and without notice. Such changes will, however, be incorporated into new editions of this manual.All rights reserved.Ericsson Inc., 1999.Publication Number: LZT 123 1422 PA4Printed in the U.S.A.T18z User’s Guide

Some menus/features are operator dependent.1Guidelines for Safe and Efficient Use . . . . . 5Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Phone Care and Operation . . . . . . . . . . . . . . . . . . . . . . . .7Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Preparing Your Phone for Use . . . . . . . . . . 10T18z Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10The SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11The Display, Keys, and Menus . . . . . . . . . . 13Turning Your Phone On/Off . . . . . . . . . . . . . . . . . . . . .13Display Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Active Flip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Navigating the Menu System . . . . . . . . . . . . . . . . . . . . . .16Making and Receiving Calls . . . . . . . . . . . . 18Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Making International Calls . . . . . . . . . . . . . . . . . . . . . . 19Making Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . 19Receiving Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Your Phone Book . . . . . . . . . . . . . . . . . . . . 22Entering Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Storing a Number Together with a Name . . . . . . . . . . . 23Overwrite Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Using the Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . 25Keeping the Phone Book Up to Date . . . . . . . . . . . . . . . 25Copying Phone Numbers Between Memories . . . . . . . . 26Using the Call List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Calling Line Identification (CLI) . . . . . . . . . . . . . . . . . . 28Personalizing Your Phone . . . . . . . . . . . . . 30Ring Signal Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Ring Signal Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Your Own Ring Signals . . . . . . . . . . . . . . . . . . . . . . . . . 32Vibrating Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Minute Minder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Message Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Key Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Table of Contents

Some menus/features are operator dependent.2Display Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Display Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Greeting Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Phone Number Display . . . . . . . . . . . . . . . . . . . . . . . . . 34Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Auto Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Master Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Mail Services . . . . . . . . . . . . . . . . . . . . . . . . 37Short Message Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Enabling the Phone to Send SMS . . . . . . . . . . . . . . . . . . 37Enhancing Your Text Messages . . . . . . . . . . . . . . . . . . . 37Composing a Text Message . . . . . . . . . . . . . . . . . . . . . . 38Sending a New Text Message . . . . . . . . . . . . . . . . . . . . . 38Sending a Stored Message . . . . . . . . . . . . . . . . . . . . . . . . 39Receiving a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Reading a Stored Message . . . . . . . . . . . . . . . . . . . . . . . . 40Replying to a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Erasing a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Storing Incoming Messages . . . . . . . . . . . . . . . . . . . . . . . 41Own Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Area Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Forwarding Calls . . . . . . . . . . . . . . . . . . . . . 46Activating Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . 46Forwarding When the Data Menus are On . . . . . . . . . . . 46Checking the Forward Status . . . . . . . . . . . . . . . . . . . . . 47Canceling Call Forwards . . . . . . . . . . . . . . . . . . . . . . . . . 47Canceling All Call Forwards . . . . . . . . . . . . . . . . . . . . . . 47Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Keypad Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48The SIM Card Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Phone Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Call Restrict . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Fixed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Closed User Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Handling Multiple Calls. . . . . . . . . . . . . . . . 54Call Waiting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Making a Second Call While a Call is in Progress . . . . . . 54Receiving a Second Call . . . . . . . . . . . . . . . . . . . . . . . . . 54Receiving a Third Call . . . . . . . . . . . . . . . . . . . . . . . . . . 55Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Searching for Networks . . . . . . . . . . . . . . . . . . . . . . . . . . 58Selecting a New Network . . . . . . . . . . . . . . . . . . . . . . . . 58List of Forbidden Networks . . . . . . . . . . . . . . . . . . . . . . 59

Some menus/features are operator dependent.3List of Preferred Networks . . . . . . . . . . . . . . . . . . . . . . . .59Search Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60Voice Activation. . . . . . . . . . . . . . . . . . . . . . 61Recording Voice Dialing Labels . . . . . . . . . . . . . . . . . . . .61Replacing a Voice Dialing Label . . . . . . . . . . . . . . . . . . .62Erasing a Voice Dialing Label . . . . . . . . . . . . . . . . . . . . .63Voice Label List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63Using Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . .63Recording the Voice Answering Labels . . . . . . . . . . . . . .64Replacing the Voice Answering Labels . . . . . . . . . . . . . . .64Answering or Rejecting a Call Using Voice Activation . . .64Extra Features . . . . . . . . . . . . . . . . . . . . . . . 65Call Time and Call Cost . . . . . . . . . . . . . . . . . . . . . . . . .65Credit Limit for Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .66Calling Card or Credit Card Calls . . . . . . . . . . . . . . . . . .66Editing or Deleting a Calling Card Number . . . . . . . . . .68Using Two Voice Lines . . . . . . . . . . . . . . . . . . . . . . . . . .68Calling from Your Car . . . . . . . . . . . . . . . . . . . . . . . . . . .69Handsfree Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69Answering Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70Sending and Receiving Faxes and Data . . . . . . . . . . . . . .70Activating the Data Menus . . . . . . . . . . . . . . . . . . . . . . .70Next Call Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Quick Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Troubleshooting . . . . . . . . . . . . . . . . . . . . . 74Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Phone Does not Come On . . . . . . . . . . . . . . . . . . . . . . 75Poor Sound Quality in Handsfree Equipment . . . . . . . . 75Voice Answering Does Not Perform Well . . . . . . . . . . . 75Voice Recording Problems . . . . . . . . . . . . . . . . . . . . . . . 75Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Terminology. . . . . . . . . . . . . . . . . . . . . . . . . 76Acronym List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Some menus/features are operator dependent.4

.Guidelines for Safe and Efficient Use 5Since its introduction in the mid 1980s the mobile phone is one of the most exciting and innovative products ever developed. Your phone can help you to stay in touch with your office, your home, emergency services, and others.SafetyExposure to Radio Frequency EnergyYour wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.In August, 1996, the Federal Communications Com-mission (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards pre-viously set by both US and international standards bodies:•ANSI C95.1 (1992)*•NCRP Report 86 (1986)*•ICNIRP (1996)*Those standards were based on comprehensive and periodic evaluations of the relevant scientific litera-ture. For example, over 120 scientists, engineers, and physicians from universities, government health agen-cies, and industry reviewed the available body of research to develop the ANSI Standards (C95.1).The design of your phone complies with the FCC guidelines (and those standards).* American National Standards Institute: National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection.Posted FacilitiesTurn your phone OFF in any facility where posted notices so require.AircraftFCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft.Electronic DevicesMost modern electronic equipment, for example equipment in hospitals and cars, is shielded from RF energy. However, certain electronic equipment may not be shielded against RF signals from your wireless phone.Guidelines for Safe and Efficient Use

6Guidelines for Safe and Efficient UsePacemakersThe Health Industry Manufacturers Association rec-ommends that a minimum separation of six (6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are con-sistent with the independent research by and recom-mendations of Wireless Technology Research.Persons with pacemakers:•Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON.•Should not carry the phone in pockets (including overcoat pockets) within 6” of the pacemaker device.•Should use the ear opposite the pacemaker to minimize the potential for interference.If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider (or call the customer service line to discuss alternatives).Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.ChildrenDo not allow children to play with your phone. They could hurt themselves or others, or could accidentally damage the phone. Your phone contains small parts that could be detached and create a choking hazard.Blasting AreasTo avoid interfering with blasting operation, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Potentially Explosive AtmospheresTurn your phone OFF when in any area with a poten-tially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fuelling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities;

.Guidelines for Safe and Efficient Use 7vehicles using liquefied petroleum gas (such as pro-pane or butane); areas where the air contains chemi-cals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.DrivingCheck the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please:•Get to know your wireless phone and its features such as speed dial and redial.•When available, use a handsfree device.•Position your wireless phone within easy reach.•Suspend conversations during hazardous driving conditions or situations.•Do not take notes or look up phone numbers while driving.•Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic.•Do not engage in stressful or emotional conversa-tions that may be distracting.•Use your wireless phone to call for help.•Use you wireless phone to help others in emer-gencies.•Call roadside assistance or a special wireless non-emergency assistance number when necessary.•Give full attention to driving.•Pull off the road and park before making or answering a call if driving conditions so require.VehiclesRF signals may affect improperly installed or inade-quately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.For Vehicles Equipped with an Air BagAn air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the airbag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Phone Care and Operation•Do not expose your mobile phone to moisture or extreme temperatures.

8Guidelines for Safe and Efficient Use•Do not use any other accessories but Ericsson originals. Failure to do so may result in loss of performance, fire, electric shock or injury, and will void the warranty.•Do not attempt to disassemble the phone. Doing so will void warranty. This phone does not con-tain consumer serviceable components. Service should only be performed by Authorized Service Centers.•Do not allow objects to fall on, or liquids to spill on your phone or accessories.•Connect AC (power supply) only to designated power sources as marked on the phone.•To reduce risk of damage, remove the electrical cord from the outlet by pulling the AC adapter rather than the cord.•Make sure the electric cord is located where it will not be stepped on, tripped over, or otherwise subjected to damage or stress.•To reduce risk of electric shock, unplug the unit from the power source before attempting any cleaning. Once unplugged, use a soft cloth lightly dampened with water for cleaning.•DANGER - Never alter the AC cord or plug. If the plug will not fit into the outlet, have a proper outlet installed by a qualified electrician. Improper connection can result in risk of electric shock.•Use only the supplied or an approved replace-ment antenna. Unauthorized antennas, modifica-tions, or attachments could damage the phone and may violate FCC regulations.•Don’t continue to twist the antenna after it has been inserted. Excess twisting will damage the antenna.•Be cautious if removing your antenna. A detached antenna may be a choking hazard for children.How to use your phone for optimum performance with minimum power consumption:•Hold the phone as you would any other tele-phone. While speaking directly into the mouth-piece, angle the antenna in a direction up and over your shoulder. If the antenna is extendable/retractable, it should be extended during a call. • Do not hold the antenna when the phone is in use. Holding the antenna affects call quality, may cause the phone to operate at a higher power level than needed and shortens talk and standby times.Battery InformationNew BatteriesThe battery packaged with your phone is not fully charged. For maximum battery capacity, use your charger to condition the battery.

.Guidelines for Safe and Efficient Use 9Recycling Your BatteryYour phone manufacturer is a member of the Rechargeable Battery Recycling Corporation (RBRC), a non-profit service organization designed to assist in the recycling of rechargeable batteries. Many areas require the recycling of rechargeable batteries. In the U.S., call 1-800-822-8837 to find out how to recycle your battery. Outside the U.S., contact your local retailer for recycling instructions.Battery Use and CareA rechargeable battery has a long service life if treated properly. A new battery, or one that has not been used for a long period of time, should be conditioned before using your phone. Avoid recharging a fully-charged or almost fully-charged battery. If your phone shuts off due to low battery power, you should charge the battery within 24 hours for the battery to reach full capacity.•Do not leave your battery where it may be sub-jected to extremely hot or cold temperatures. This could reduce the battery’s capacity.•Do not let the metal contacts on the battery touch another metal object such as keys in your pocket. This could short-circuit and damage the battery.•Do not attempt to take a battery apart.•Do not expose a battery to open flame. This could cause the battery to explode.•Turn your phone OFF before removing the bat-tery.•Use only the AC/DC adapter supplied with your battery charger. Using a different adapter could be dangerous and will void your phone warranty.•Never charge a battery when the ambient room temperature is below 50° F (10°C) or above 105°F (40°C).•Do not allow the battery to be placed into the mouth. Battery electrolytes may be toxic if swal-lowed.

Some menus/features are operator dependent.10 Preparing Your Phone for UseT18z ComponentsAssemblyYou need to do the following to use your phone:1 Insert the SIM card2 Attach the battery to the phone3 Charge the batteryThe SIM CardWhen you register as a subscriber with a net-work operator, you get a Subscriber Identity Module (SIM) card. The SIM card contains a computer chip that keeps track of your phone number, the services included in your subscription, and your Phone Book information.SIM cards come in two sizes. One is the size of a credit card, and the other is smaller. Your phone uses the smaller card. Many credit card-sized SIM cards have a perforated smaller card that you can take out easily. Before you can use your phone, you must insert the SIM card as shown below.Preparing Your Phone for Use➊➋➌➍➊ ➋➌ ➍ ➎ ➎➊ ➋ ➌ ➍ ➎ ➏➐ ➑ ➒ ➋➊➍➌➎➒➐➑➏Network11:33 am+

Some menus/features are operator dependent.Preparing Your Phone for Use 11Inserting the SIM CardRemoving the SIM CardThe BatteryYour phone comes with a nickel metal hydride (NiMH) battery. The battery is not charged when you buy your phone, but there may be enough power to turn the phone on. We recommend that you charge the battery before you use the phone for the first time.Attaching the Battery to your PhonePlace the battery on the back of the phone and push until you hear a click.When to Charge the BatteryThe nickel metal hydride battery that comes with your phone can be charged whenever you wish without affect-ing its performance. This is not the case with nickel cad-mium type batteries, often sold as accessories by other 1 Remove the battery (if attached).2 Slide the SIM card into the SIM card slot with the golden connectors facing down and the cut corner turned to the left.3 Push the SIM card into the slot completely.1 Remove the battery (if attached).2 Slide the SIM release button towards you.3 Pull out the SIM card.

Some menus/features are operator dependent.12 Preparing Your Phone for Usesuppliers. For the best talk and standby time,we recom-mend that you use only Ericsson original batteries with your phone.To remind you that you will soon need to charge the battery or replace it with a charged one:•an alarm signal (a long beep) sounds and the mes-sage appears for two seconds in the display. The signal is repeated several times.•the indicator light on top of the phone starts flash-ing red.Note! The phone turns itself off when the battery can no longer power it satisfactorily.Charging the Battery1 Make sure that the battery is attached to the phone. 2 Connect the charger to an electrical outlet.3 Connect the other end of the cable to the phone as shown in the picture. The flash symbol on the plug must face upwards.To indicate charging:•the battery meter in the display pulses continu-ously.•the indicator on top of the phone shows a steady red light (or green, if the phone is turned on).When the battery is fully charged, the battery meter in the display is full and the indicator on top of the phone shows a steady green light.Disconnecting the ChargerDisconnect the charger from the phone by pushing the plug upwards, and then pulling it out.

Some menus/features are operator dependent.14 The Display, Keys, and Menusyou to call the emergency number 911 (or 112, the international emergency number). See “Making and Receiving Calls” on page 18.No networkIf the message is displayed, there is no network within range or the received signal is too weak. You have to move to get a stronger signal.Display LanguageThe first time you turn on your phone, you may want to change the language in the displayMost SIM cards automatically set the display language to the language of the country where you bought your SIM card. If this is not the case, the default language is English. You can easily reset your phone to the SIM default if you accidentally set it to a language you do not understand.1 Press the CLR key.2 Press the key.3 Enter 0000.4 Press the key.Display Icons This illustration shows all possible icons and their place-ment on the display. Some of the features represented in the diagram are network dependent.1 Signal Strength - Strength of received signal in steps. More bars indicate more strength.2 Alarm - The alarm clock has been set.3 Keypad Lock - Keypad is locked.4 Line Indicator - Tells which line is in use (if you have alternate line service).5 Forward- The Forward all function is activated.6 SMS - You have received a text message.7 Voicemail - You have received a voice message.8 Silent Ring Signal - No sound will be heard when you receive a call.9 Battery - State of the battery. A fuller icon indicates more battery strength.123645798

Some menus/features are operator dependent.The Display, Keys, and Menus 15Key FunctionsThe keys have multiple functions. Use this table as a guide for getting the most of our your keypad.Active FlipYou can answer a call by opening the flip and end it by closing the flip. This is known as an Active Flip. Key: Use:•Make calls.• Answer calls. • Select menus or submenus.• Initiate a voice dial call.• Turn the phone on or off. • End a call.• Go back one level in a menu or leave a setting unchanged. and (arrow keys)• Access and navigate (scroll through) the menu system.• Erase individual digits from the display. • Erase all digits from the display.• Mute the microphone during a call .• Return to standby mode.• Mute the ringer.• Enter the digits 0-9. • Enters the international prefix (+) with 0 key.• Enter special characters. For instance, to enter X, press the 9 key twice. • Enter a star (*) character. • Enter a p (pause).• Switch cases (A or a).• Enter #. • Terminate the input of PIN and security codes. • Enter the phone icon.• Increase or decrease the volume of the earpiece or handsfree loudspeaker during a call. • Show today’s date in the display during standby. • Reject a call.• Initiate a voice dial call with upper side key.When Activated:• Answers calls.• Ends calls.• Illuminates display.Key: Use:T18z

Some menus/features are operator dependent.16 The Display, Keys, and MenusActivating/Deactivating Your Flip1 Select Active Flip from the SETTINGS menu.2 Press YES to activate (or deactivate) the flip.3 will appear.Temporarily Disabling the Active Flip If You Do Not Want to Answer the Call•Press and hold a side volume key while you open the flip.If You Do Not Want to End the Call•Press and hold a side volume key while you close the flip. Navigating the Menu SystemA diagram of your menu system is located on the inside front cover of this user’s guide. You can find all your phone’s functions in the menu system. You use the menu system every time you want to change a setting in your phone, such as the ring level. The menus are arranged in a continuous loop, which you move (Scroll) through with and . Each menu contains a list of options. Some menus have sub-menus with additional options. Press YES to Select a menu or function.Instead of pressing or repeatedly, you can press and hold it down until you reach the menu or submenu you want.Note! If you enter the menu system, but do not press a key within 60 seconds, the phone returns to standby mode.Display Text and SymbolsWhen you move through the menu system, the display changes. The following hints can help you:•When arrows are displayed next to the name of the sub-menu, there are more options you can scroll through with or .•Text in brackets shows the current setting of the function shown in the display.In this manual, we have chosen to exclude some of the details in the pictures of the displays. This is so that it will be easier for you understand the display texts.

Some menus/features are operator dependent.The Display, Keys, and Menus 17Ring LevelChange to Line 2?InfoLast callTotal callsCreditPriceCall listNext Call Type*SpeechFaxDataForwardPhone numberFax number*All numbers*NetworkSelect netSearchmodeEdit listNew searchAccessCall restrictCall waitingClosed CallsCard lockPhone lockCall Cards securityFixed dialingSettingsVibrateRing typeEdit melodyClock/DateMail alertKeylockKey soundLightMinute minderSettings (cont.)Call listCall infoActive flipAnswering modeHandsfreeVoice answerVoice dialAuto storeGreetingPhone numberLanguageData menusLIne tagMaster resetTools Set alarmCalculatorMailVoicemailRead messagesSend messageOptionsArea messagesPhone BookName recallPosition recallStoreEditEraseErase all from phoneVoice label lIstCopy allCopyCall card numbersFixed numbersService recallInfo recallAn asterisk (*) indicates that Data Menus (within SETTINGS menu) must be activated.

Some menus/features are operator dependent.18 Making and Receiving CallsIn this chapter, we assume that you have turned on your phone and that you are within range of a network. If you are away from home, you may use other networks, pro-vided your home network has an agreement that allows you to do this (see also “Networks” on page 58).Making a Call1 Enter the phone number (the area code may be neces-sary).2 Press YES. The display will show and then . Once connected, a time counter automatically starts and you can see how long you have been on the phone. A phone icon will appear in the display. If you have activated the Call Cost option (see “Call Time and Call Cost” on page 65 “) and your network and SIM card supports it, you also see the price of the call in the display.Ciphering Ciphering is a built-in feature that “scrambles” your calls and messages to provide additional privacy. An exclama-tion point next to the phone icon during a call indicates that ciphering is currently not available from the service provider.Redialing a Previously Called Number1 Press YES.2 Press or until the number (and name) you want to all appears.3 Press YES to make the call.Automatic RedialingIf the display shows you can redial the number by pressing YES. When the call is answered, you hear a beep followed by a ring signal.Your phone automatically redials (up to 10 times) until:•the call is answered. •you press a key or receive a call.Making and Receiving Calls

Some menus/features are operator dependent.Making and Receiving Calls 19Ending a Call•Close the flip (if activated) or •Press NO to end the call.Making International Calls1 Press and hold the 0 key until a + sign appears.2 Enter the country code, area code (without any lead-ing zero) and phone number.3 Press YES.Making Emergency Calls1 Enter 911 (or 112, the international emergency num-ber).2 Press YES.Note! The emergency number 911 (or the international emer-gency number, 112) can be used in most countries, with or without a SIM card inserted, if a GSM network is within range. Some network operators may require that a SIM card is inserted, and in some cases that the PIN code has been entered, as well. Check with your service provider.Some networks may not use the emergency number, 911. The international emergency number is 112. If you are unsure of what emergency number is used in your country, please contact your network operator or service provider.Receiving CallsWhen a call is received, the phone rings and the indica-tor light on the top of the phone flashes green rapidly. The display flashes and shows Note! If the Backlight setting is On, backlight will stay on. If it is set to Off/Auto, it will flash when a call is received.Note! The phone has a built-in vibrating unit which allows you to receive calls discretely. See “Vibrating Unit” on page 32 .If your subscription includes the Call Line Identifica-tion (CLI) service and the caller’s network sends the number, you see the caller’s number in the display. If the caller’s number and name is stored in the Phone Book, the caller’s name is displayed too.Answering a Call•Open the flip (if activated) •Press YES, if the flip is open.

Some menus/features are operator dependent.20 Making and Receiving Calls•Voice Activated Answer (Refer to “Answering or Rejecting a Call Using Voice Activation” on page 64.)Rejecting a CallYou can reject a call by any one of the following meth-ods:•Double-click one of the volume keys on the side of the phone. •Press NO, if the flip is open.•Close flip (if activated and open).•Voice Activated Answer (Refer to “Answering or Rejecting a Call Using Voice Activation” on page 64.)The caller hears a busy tone if the function is supported by the caller’s network. If Forward on Busy is activated, the call is forwarded to the number you have specified.During a CallYour phone has several functions which you might find helpful while a call is in progress.Changing the Earpiece Volume•Pressing the upper side volume keys increases the volume.•Pressing the lower side volume keys decreases the volume.Muting the MicrophoneNote! All digits must be removed from the display before mut-ing can be used. 1 Press and hold the CLR key. appears in the display.2 To continue your conversation, release the CLR key.Note! Instead of pressing and holding the CLR key, you can put the call on hold.Putting the Call on HoldPress YES. 1 appears in the display1 To continue your conversation, press YES again.Scratch Pad FunctionIf you need to make note of a phone number during a call, you can use the Scratch Pad. 1 Use the number keys to enter the number.

Some menus/features are operator dependent.Making and Receiving Calls 212 When you end the call, the number remains in the dis-play. You can now call the number by pressing YES, or save it in the Phone Book (see “Your Phone Book” on page 22).Sending Tone SignalsTo use telephone banking services or to control an answering machine, you need to use codes. These codes are sent as tone signals (also known as DTMF tones or touch tones).Press the appropriate keys (0-9, * and #).Note! You can also save a code together with a phone number in the Phone Book. See “Your Phone Book” on page 22.Checking Duration/Cost of CallDuring a call, the display shows the duration in minutes and seconds. If you prefer, you can have the call cost dis-played, provided your network and your SIM card sup-port this feature. See “Call Time and Call Cost” on page 65 on how to use this feature.Handling Simultaneous CallsYour phone is capable of handling more than one call simultaneously. You can put the current call on hold, and then make or answer a second call. You can also set up a conference call with up to five other people. See “Call Waiting Service” on page 54 and “Conference Calls” on page 56 on how to use this feature.

Some menus/features are operator dependent.22 Your Phone BookYou can create a personal phone book by storing phone numbers and accompanying names on the SIM card (card memory) and in the phone (phone memory). You use the PHONE BOOK menu for storing and recalling all the phone numbers in your phone book.Every phone number you store includes a position num-ber, shown in brackets. You can store the phone numbers together with a name tag to make it easier for you to keep track of your phone numbers. If the position number has a phone icon next to it, this means that you are storing the phone number in the phone memory and cannot take it with you if you change phones. The phone memory can hold up to 100 phone numbers. The number of memory locations on your SIM is dependent on your network subscription. Unless otherwise specified, phone book entries will be stored on your SIM. Once the SIM is full, the entries will be stored in the phone’s memory.Entering CharactersYou can only enter letters when you are using the phone book and when you are composing a short message (SMS), see “Short Message Service” on page 37”.Press the appropriate key, 1–9, 0 or #, repeatedly until the character you want appears in the display.Example: to enter an , press 2 once. To enter a , press 2 twice.Your Phone BookPress… to get…1Space - ? ! ‚ . : ; " ’ < = > ( ) 12 A B C Å Ä Æ à Ç 2 Γ3D E F è É 3 ∆ Φ4 G H I Ì 45J K L 5 Λ6 M N O Ñ Ö Ø ò 67P Q R S ß 7 Π Σ8T U V Ü ù 89 W X Y Z 90 + & @ / ¤ % $ £ ¥ § ¿ ¡ 0 Θ Ξ Ψ Ω## *

Some menus/features are operator dependent.Your Phone Book 23Quick Tips Entering Lowercase LettersEnter the letter, for example an , and then press *. An appears. Lowercase letters now appear until you press * again.Entering DigitsWhen entering special characters, you can go directly to the keypad number by pressing and holding the number key.Inserting the Phone Book IconIn the PHONE BOOK menu, press # to enter the phone icon. Outside the PHONE BOOK menu, you must press and hold # to enter it. Storing a Number Together with a Name1 Enter the area code and phone number you wish to store.2 Scroll to PHONE BOOK and press YES.3 Select Store.The first free memory position is suggested.4 Enter the name tag that you want to associate with the number. 5 Press YES. appears.6 If you do not want to record a voice label, press NO. Press YES to record.7 Say the voice label after the tone. The voice label is played back to you.8 If you are satisfied, press YES to store the voice label. Otherwise, press NO and follow the prompts.Once stored in your phone book, the voice label icon appears next to the position number. For more information on voice recognition, see “Voice Activation” on page 61.Note! If you intend to use your phone away from your local area, you should store all phone numbers with the area code. If you intend to use your phone internationally, you should also include the international prefix (+). The international prefix will automatically be replaced by the international dialing prefix for the country you are call-ing from, followed by the country code, the area code, and the phone number. Storing in a Different Position than SuggestedAfter you have entered a phone number to be stored and selected the Store function, you can choose what posi-tion to store the number in.

Some menus/features are operator dependent.24 Your Phone BookSaving in a position of your choice in the card memory:Press and enter a position number of your choice.Saving in a position of your choice in the phone memory:Press and press # once. Enter the position followed by YES.Saving in the first empty position in the phone memory:Press and press # twice followed by YES. Overwrite ProtectionIf you try to store a phone number in a position which already contains a phone number, the message appears in the display. Then do one of the following:Storing in the selected positionPress YES to replace the number with the new one.Storing in a different position1 Press NO.2 Enter the new position number.3 Press YES.When a Memory is FullIf you try to store a phone number and the memory you want to store it in is full, the phone suggests a position number in the memory that is not full.When Both Memories are FullIf both memories are full, the phone does not suggest a storage position. If you still want to store the number, you have to erase an old number by entering a position that is already occupied and press YES.Erasing a Storage Position from the SIM Memory1 Scroll to PHONE BOOK and press YES.2 Scroll to . Press YES.3 Enter, or scroll to, the position number you want to erase.4 Press YES.Erasing a Storage Position from the Phone Memory1 Scroll to PHONE BOOK and press YES.2 Scroll to and press YES.3 Press #. The phone icon appears.4 Enter, or scroll to, the position number you want to erase.5 Press YES.Note! If you choose , all phone numbers that are stored with the phone icon are lost.

Some menus/features are operator dependent.Your Phone Book 25Using the Phone BookThere are two ways of using the phone book: you can either call a number by using the name tag stored with it; or you can call the number by using the memory position that the number is stored in.Calling Using the Name1 Clear the display.2 Scroll to PHONE BOOK and press YES.3 Select Name recall.4 Enter the name of the person you want to call, or scroll with until you find it.5 Press YES to call the number.Calling Using the Position1 Clear the display.2 Scroll to PHONE BOOK and press YES.3 Select Position recall.4 Enter the position number you want to call and press YES.If You Know the Position Number1 Enter the position number.2 Press #.3 The name will appear.4 Press YES to call.Speed Dialing (memory positions 1 - 9)1 Clear the display.2 Press a position number, 1 - 9.3 Press YES.Keeping the Phone Book Up to DateSometimes people change their names, their phone number, or even both. To get the best use out of your phone book, you want the names and numbers to be correct. They are easily changed with the Edit Phone Book feature. If someone has changed both name and number, it might be easier to overwrite the old storage position with the new one, instead of changing both name and number separately.Changing a Phone Number in Your Phone Book1 Clear the display.2 Scroll to PHONE BOOK and press YES.3 Select Edit.4 Scroll to Find name.5 Enter the full name and press YES.6 Press once to move the cursor to the row with the phone number.7 Move the cursor with to where you want to change the number.8 Enter the new number or clear the display with CLR.

Some menus/features are operator dependent.26 Your Phone Book9 Press YES.Changing a Name in Your Phone Book1 Clear the display.2 Scroll to PHONE BOOK and press YES.3 Select Edit.4 Scroll to Find name.5 Enter the name and press YES.6 Use to navigate.7 Change the name by entering or erasing letters.8 Press YES.Entering the Phone Book AlphabeticallyYou can access entries in your phone book using the key-pad. For example, to access entries beginning with A-C, press the 2 key. To access entries beginning with M-O, press the 6 key. Copying Phone Numbers Between MemoriesIf you want to use a different SIM card or phone, it is a good idea to copy your phone book from the SIM card to the phone memory or vice versa. Then you can easily copy the phone book back to the memory of your choice. Also, as you fill up the phone book memories, you might want to move entries from one memory to another.Copying a Number from SIM Memory to Phone Memory1 Scroll to PHONE BOOK and press YES.2 Select Copy.3 Select Card Phone.4 Enter the number of the first memory position in the SIM memory you want to copy to the phone memory and press YES.5 Enter the number of the first memory position in the phone memory you want to copy to and press YES.6 Press YES to copy.The next position in the SIM memory is displayed and the first empty position in the phone memory is sug-gested.7 To continue copying, press one of the following:•YES to copy.•NO to go to the next position in the SIM memory.•CLR to copy to another position in the phone memory. Enter the number of the position and press YES.• and to move between positions in the SIM memory.Interrupting Copying•Press CLR twice.Copying a Number from Phone Memory to SIM MemoryFollow the instructions in “Copying a Number from SIM Memory to Phone Memory”, but chose the Phone

Some menus/features are operator dependent.Your Phone Book 27Card option in the PHONE BOOK menu instead of Card Phone.Copying All Numbers from SIM to Phone Memory1 Scroll to PHONE BOOK and press YES.2 Select Copy all.3 Select Card Phone.4 Enter the number of the first position in the SIM memory you wish to copy to the phone memory and press YES.5 Enter the number of the first position in the phone memory you wish to copy to and press YES.6 Press YES to start copying.Copying All Numbers from Phone Memory to SIM Follow the instructions in “Copying a Number from SIM Memory to Phone Memory”, but choose the Phone Card option in the PHONE BOOK menu instead of Card Phone.Using the Call ListThis chapter describes the Call List function, which is a type of telephone number log or a memory that stores information (time, date, phone number, and name - if stored in phone book) about the last 30 incoming and outgoing calls. Once your list exceeds 30 calls, the oldest one is deleted.The numbers that you have dialed are always stored. If your subscription includes the CLI service and the caller’s network sends the number, you will find the number (together with a name if stored in your phone book) of an incoming call in the Call List. You can call any of the stored numbers. The following icons appear in the display together with the name and number.All the calls are stored together in chronological order. If the same number is called more than once, the latest call replaces earlier ones. If you check a call made on the same day, the time of the call is displayed. Otherwise, the time is replaced by the date. You can toggle between date and time by pressing *.If no information about the caller’s number was received, the display shows , which means that no information was available, your subscription does not support CLI, or the caller did not allow the number to be shown. Icon ExplanationThe Answered calls icon appears next to the date or time of answered calls.The Missed calls icon appears next to the date or time of missed calls.The Dialed numbers icon appears next to the date or time of a dialed number.

Some menus/features are operator dependent.28 Your Phone BookNote! If you change SIM cards or deactivate the Call List, it is cleared. Dialed numbers remain in the SIM card mem-ory.Activating the Call List Function1 Scroll to SETTINGS and press YES.2 Select Call list, On.Calling a Number from the Call ListPress YES from Standby.or1 Scroll to INFO and press YES.2 Select Call list.3 Scroll to the number that you want to call.4 Press YES to make the call.Missed CallsIf you have missed a call, the phone shows , where the number 1 indicates the number of unan-swered/missed calls.Press YES to go directly to the call list. Erasing a Number from the Call List1 When the caller’s name, number, and time of call appears, press CLR. appears.2 Press YES.Turning the Call List Memory Off1 Scroll to SETTINGS and press YES.2 Select Call list, Off. Note! If you turn the Call list off, all stored entries are erased.Calling Line Identification (CLI)If your subscription includes the CLI service and the caller’s network sends the number, you see the caller’s number at the bottom of the display when you receive a call. If the number is stored with a name in the phone book, the name is also shown in the display.Hiding or Showing Your Phone NumberWith most subscriptions, the receiver can see your phone number when you make a call. However, some operators offer subscriptions where your phone number is normally hidden. If you want to change the setting for a particular call, this is possible, provided the network you use supports it.Hiding Your Phone Number for a Particular Call1 Enter the phone number you wish to call.

Some menus/features are operator dependent.Your Phone Book 292 Scroll to SPECIAL FUNCTIONS and press YES.3 Select Hide ID.Showing Your Phone Number for a Par-ticular Call1 Enter the phone number you wish to call.2 Scroll to SPECIAL FUNCTIONS and press YES.3 Select Send ID.

Some menus/features are operator dependent.30 Personalizing Your PhoneYour phone includes a number of functions which let you adapt your phone to your own personal needs in dif-ferent situations. Note that some of the functions allow you to have one setting when the phone is handheld and another when it is connected to handsfree equipment. See “Calling from Your Car” on page 69“.Ring Signal VolumeYou have eight ring level choices. You can choose from six ring levels, turn the ring signal off (0), or select a ring signal that rises in steps from the softest volume to the loudest.To set the ring signal volume1 Scroll to RING LEVEL and press YES.The ring signal volume appears in the display.2 Use increase the volume, to decrease it.The phone rings once with the actual setting as you increase the volume, except for the Step (^)setting.3 Press YES to save the setting.Note! Use the volume keys on the side of the phone to change the volume of the ring signal silently.Ring Signal TypeYou can choose the type of ring signal from a list of dif-ferent ring tones and melodies. You can also compose up to four melodies of your own by entering notes with the keypad (see “Your Own Ring Signals” on page 32 ).Ring Tones1 Low 2 Medium3 High4 MixNote! When the lowest setting is selected, the phone will only click twice. If the Vibrating Unit is also activated, the phone will click twice and the unit will vibrate continu-ously.Melodies1 Scotland the Brave2 Bronzol3 ToccataPersonalizing Your Phone

Some menus/features are operator dependent.Personalizing Your Phone 314 Sailors Hornpipe5 The Entertainer6 Eine Kleine Nachtmusik7 Für Elise8 Bergakungens Sal9 Vivaldi - Four Season - Spring10 Boccherini - Menuett11 Verdi - Rigoletto12 Grieg - Per Gynt13 Brahms - Hungarian dance number 514 Trad. - Gärdebylåten15 Wagner - ValkyrianTo choose one of the ring signal types1 Scroll to SETTINGS and press YES.2 Select Ring type.3 Select Phone.4 Scroll until you find the ring signal type that you want. If you do not wish to disturb other people, use the vol-ume keys on the side of the phone to scroll silently.5 When you reach the ring type you want, select it by pressing YES.Different Ring Signals for Line 1 and Line 2If you subscribe to the Alternate Line Service (ALS), L1 or L2, depending on the line in use, is displayed instead of Phone. This means that you can set different ring sig-nals for the two lines.Different Ring Signals for Speech, Data and Fax CallsIf you have turned the DATA menus on (see “Sending and Receiving Faxes and Data” on page 70), you can set different ring signals for speech, L1 or L2, fax, and data calls.Personal Ring SignalsIf your subscription includes the CLI service, you can assign a personal ring signal for up to 10 callers. In other words, you can have one ring signal that corresponds to your home phone number, one to your office, etc.If the last seven digits of a caller’s number correspond to a number you have specified, then that caller’s ring signal is used.You can include question marks (?) in a phone number. For example, 919555???? means that calls from phone numbers between 9195550000 and 9195559999 will have the same personal ring signal. To enter a ?, press #.Specifying a Caller’s Number and the Accompanying Ring Signal1 Scroll to SETTINGS and press YES.2 Select Ring type.3 Select Personal.4 appears. 5 Press YES.

Some menus/features are operator dependent.32 Personalizing Your Phone6 Enter the caller’s number and then press YES.If a phone number is stored in the phone book, press to recall the number.7 Scroll to ring signal type you want and then press YES.Erasing a Caller’s Number1 Scroll to SETTINGS and press YES.2 Select Ring type.3 Select Personal.4 Scroll to .5 Press YES.6 Scroll to the number you wish to erase and then press YES.Your Own Ring SignalsYou can compose four ring signals.Composing a Ring Signal1 Scroll to SETTINGS and press YES.2 Select Edit melody.3 Select Own 1, Own 2, Own 3, or Own 4.4 Press and hold CLR to clear the display.5 Use the keypad to enter notes.The keypad now works as a key-board.6 Press and hold a key to enter a long note.7 Press 0 to raise the note one octave.8 To listen to your melody, press YES. 9 Press YES again to save it or press NO to continue edit-ing.Vibrating UnitYou can set the phone´s vibrating unit to Off, On, or On when silent when the ring signal is turned off.1 Scroll to SETTINGS and press YES.2 Select Vibrate.3 Select the desired setting.Minute MinderIf you turn on the minute minder, you hear a beep once every minute during a call.

Some menus/features are operator dependent.Personalizing Your Phone 331 Scroll to SETTINGS and press YES.2 Select Minute minder.3 Select On or Off.Message SignalYou can choose whether to hear clicks, tones or nothing (silent) when you receive a text (SMS) or voice message.1 Scroll to SETTINGS and press YES.2 Select Mail alert.3 Select the sound you wish to hear.Key SoundYou can choose whether to hear clicks, tones, or nothing (silent) when you press the keys.1 Scroll to SETTINGS and press YES.2 Select Key sound.3 Select the key sound you want.Note! The side volume keys and flip will also click when the key sound is set to click. With all other settings they are silent.Display LightYou can set the display light to automatic, off or on. In automatic mode, the display light is turned off automat-ically 10 seconds after you pressed the last key. It comes on again when you press a key, open the flip, or when you receive a call or message1 Scroll to SETTINGS and press YES.2 Select Light.3 Select the display light setting you want.Display LanguageThe default language on your SIM card is English.To change the display language:1 Scroll to SETTINGS and press YES.2 Select Language.3 Select the language you want.Note! If by accident you end up with your phone displaying a language you do not understand, you can return to the SIM default by pressing CLR , 0000 . Greeting TextThis feature is network dependent.

Some menus/features are operator dependent.34 Personalizing Your PhoneWhen you turn on your phone, your service provider’s name or the Ericsson logotype appears in the display. Instead of this, you can write your own greeting.1 Scroll to SETTINGS and press YES.2 Select Greeting.3 Select New text.4 Write your new greeting, using the number keys. For information on how to enter letters, see “Your Phone Book” on page 22.5 Press YES to confirm your setting.Turning the Greeting ON/OFF1 Scroll to SETTINGS and press YES.2 Select Greeting.3 Select On or Off.Reverting to the Ericsson Logotype1 Scroll to SETTINGS and press YES.2 Select Greeting.3 Select New text.4 Press and hold CLR to erase the greeting text. Then press YES.Phone Number DisplayYou can have your phone number displayed when you turn the phone on. This requires that you have replaced the Ericsson greeting with a greeting text of your own, or turned the Ericsson greeting off. If your phone number cannot be retrieved from your SIM card, you have to enter it yourself.Entering your Phone Number1 Scroll to SETTINGS and press YES.2 Select Phone no.3 Select Phone no. (again).4 Enter the number and then press YES.Note! If your SIM card allows it, you can also enter your fax and/or data number. 1Scroll to SETTINGS and press YES.2 Select Phone no. 3 Scroll to Fax no. or Data no. and press YES. 4 Enter the number and then press YES.TimeThe time is always displayed when the phone is in standby mode.Setting the Time Format1 Scroll to Settings and press YES.2 Select Clock/Date.3 Select Set clock.

Some menus/features are operator dependent.Personalizing Your Phone 354 Select the 24-hour or 12-hour (am/pm) clock. Twelve-hour is the default.Setting the Clock1 Enter the time in hours and minutes.If you selected the 12-hour clock, you can alternate between am and pm by pressing # or *.2 Press YES.DateWhen the phone is in standby mode, you can press a volume key to the current date. Use the lower side vol-ume key if voice activation is active. The default date format is mm-dd-yy.Setting the Date Format1 Scroll to SETTINGS and press YES.2 Select Clock/Date.3 Select Set date.4 Select the date format you want.5 Enter the year (two digits) and then press YES.6 Enter the month and day in the same way.Auto StoreYou can choose to let the phone prompt you to store a called number that is not stored in your phone book. The phone then asks when the call has ended.Turning the Function ON/OFF1 Scroll to Settings and press YES.2 Select Auto store.3 Select On or Off.Master ResetYou can reset some settings to their default values. If you do so, the following settings are affected:•all settings in the SETTINGS menu, except your own ring signal melodies,•the ring signal volume •the earpiece volume and the handsfree speaker vol-ume,•the alarm function in the TOOLS menu is turned off, and•the Area info and Reply Request in the MAIL menu are turned off.Resetting the Phone to Default Enter 73738 or

Some menus/features are operator dependent.36 Personalizing Your Phone1 Scroll to SETTINGS and press YES.2 Select Master reset.3 Enter the phone lock code (the default code is 0000) and press YES.Resetting the Display Language to SIM DefaultEnter 0000 .

Some menus/features are operator dependent.Mail Services 37Your phone is equipped with two types of mail: Short Message Service (SMS) and Voice m a il. SMS, or text messaging, allows you to send and receive text messages consisting of up to 160 characters. Voicemail is a service that allows callers to leave voice messages when you cannot answer your calls. This chap-ter will provide instructions on using the SMS and Voicemail services.Short Message ServiceYou can receive text messages when the phone is in standby mode, during a call or when incoming calls are forwarded to another phone number. If your phone is turned off when a message is sent to you will appear shortly after you turn your phone on.If your SIM card does not contain the phone number to your network service center, you must specify the num-ber yourself. Otherwise you cannot reply to messages received or send your own messages. See “Enabling the Phone to Send SMS” on page 37 .Note! The Short Message Service may not be available on all networks. Some network operators may only allow SMS to be sent within their own network.Enabling the Phone to Send SMSIf you want to send or reply to a message, you need to make sure that the service center number is set. Most modern SIM cards already contain this information at the time of purchase. You can obtain the service center number from your network operator.Setting the Service Center Address1 Scroll to MAIL and press YES.2 Select Options.3 Select Serv Center. 4 If no number appears in the display, enter the number of the service center, including the international prefix, and press YES.5 Press CLR to return to standby mode.Your phone is now ready to send text messages.Enhancing Your Text MessagesBefore you send your message, you can set the type of message, the duration of repetitions, and if you want to have a reply to your messages.Mail Services

Some menus/features are operator dependent.38 Mail ServicesMessage typeYour phone can send other types of messages. Your net-work operator’s service center may offer the facility to convert a text message into a format (e-mail, fax, telex, etc.) that suits the equipment that is going to receive the message. Check with your network operator to find out which message types you can use and how.To change message types1 Scroll to MAIL and press YES.2 Select Options.3 Select Msg type.4 Scroll to the format that you want and press YES.Repetition of MessageIf your message cannot be delivered because the receiver is not within reach of a network, you can instruct your Service Center to repeat the message for a certain length of time.Setting Repetition of a Message1 Scroll to MAIL and YES.2 Select Options.3 Select Valid period4 Scroll to the time span that you want and press YES.Reply to MessagesSometimes you may want the receiver of your message to reply. If so, you need to set the request reply prompt.Setting the Request Reply Prompt1 Scroll to MAIL and press YES.2 Select Options.3 Select Reply req.4 Select On or Off.Composing a Text MessageFor more information on how to enter text, see “Your Phone Book” on page 22.Editing the Written Text1 Scroll through the message text with the arrow keys and erase characters to the left of the cursor using CLR, or insert characters to the right of the cursor.2 Press 1 to insert a space. Note! To scroll to the beginning of the message, press until you reach the characters you want to view.Note! If there is a pause of more than 120 seconds between entering characters, the phone stores the message and returns to the standby menu.Sending a New Text Message1 Scroll to MAIL and press YES.2 Select Send message.

Some menus/features are operator dependent.Mail Services 393 Select New.An empty display appears.4 Enter your message. 5 When you have completed your message, press YES. 6 Enter the receiver’s phone number or recall it from the phone book. Note! To a c c e s s t h e PHONE BOOK menu, press twice. Scroll through the phone book using . Send Now or Later?When you have entered or recalled the receiver’s num-ber, you have two options:•To send the message now, press YES.•To store the message for later use, press NO. The message is now stored in the message memory.If you decide to send the message later, the message is labeled instead of when you access the message in the menu.Note! The same procedure is used with all types of messages, such as e-mail or fax. Check with your network operator to find out which message types you can use. You have to change the message type first.Sending a Stored Message1 Scroll to MAIL and press YES.2 Select Send message.3 Scroll to the stored message you wish to send and press YES.4 Now you can edit your message. When you are ready to send the message, press YES.5 Re-enter the phone number.6 To send the message press YES.Receiving a MessageWhen you receive a message, you hear a sound and the display indicates that you have a new message. The indi-cator light on the top of the phone rapidly flashes green.Read the Message Now1 Press YES when you see the prompt.The display shows the status of the message (New) and when it was received. If your network supports CLI, the sender’s number is also displayed. If the sender’s number and name is stored in the phone book, his or her name is shown instead.2 Press YES to read the message. Scroll through the mes-sage using the arrow keys ( takes you forwards and takes you backwards through the message).3 The prompt appears after the last line of the message. Press YES to erase.4 Press NO and will appear. If the sender wants you to reply, the displayed message will read provided that your network supports this. See “Replying to a Message” on page 41.

Some menus/features are operator dependent.40 Mail ServicesReading the Message Later•Press no when you see the prompt. The message is stored in the message memory as New and the envelope icon appears at the bottom of the standby display. Reading a Stored Message1 Scroll to MAIL and press YES.2 Select Read messages.3 Scroll to the message you are looking for.New means an unread message.Old means a read message.Sent means a message that you have sent yourself.To S e n d means a message you have written, but not sent.4 Press YES.5 Read the message as described in “Receiving a Mes-sage”.Note! To go to the next line in the message, press . Note! If there is an icon in the shape of a SIM card in front of the message, it means that it is stored on the SIM card. Note! When viewing the top line of the message, press * to switch between seeing the time and date the message was received.Embedded NumbersSending an Embedded NumberWhen sending a message to another wireless phone, or when asking someone to send a message to your Ericsson phone, you should follow the guidelines listed below to ensure that the phone retrieves the entire number from the message, displays it, and allows the phone user to dial the number by pressing YES. A phone number enclosed within double quotation marks has the highest probability of being recognized (e.g. “9195551212”).Other ways to write the phone number within messages are:•9195551212•919-555-1212•+19195551212Note! If you are sending an embedded number internationally, it is best to include the international dialing code, area code, and area prefix as part of the number to help in the call back process. The receiver of the message has the option of editing a number before attempting to call back.Note! If the number embedded in the SMS matches a phone book entry, a name will be displayed when the embed-ded number is dialed.

Some menus/features are operator dependent.Mail Services 41Calling an Embedded Number•Press YES to call the embedded name/number. If there are multiple numbers in the display, the first number will be dialed.Replying to a Message1 Scroll to the end of the message.The prompt appears.2 Press YES to reply (press NO if you do not want to reply). 3 Press YES and proceed as described in “Composing a Tex t Me s s a ge ” .Erasing a Message1 Scroll to the end of the message.The prompt appears.2 Press YES to erase. The next message automatically appears in the message list.Note! Press and hold CLR within a message to clear.Storing Incoming MessagesIf you do not want to read an incoming message at once, it is automatically stored in the message memory in the phone. This allows you to read it later. If there are any unread messages in the message memory, the envelope icon appears at the bottom of the standby display. The message is stored in the message memory as New.The message memory can hold up to 15 messages. When all memory positions are full, the oldest read mes-sage is overwritten when a new unread message is received.If the message memory becomes full with unread mes-sages, new messages are automatically stored in the SIM card memory. If the SIM card memory becomes full, the envelope icon starts flashing.Messages remain in the message memory until you erase them (see “Erasing a Message” on page 41), until you insert a different SIM card, or until the telephone needs the memory space to store new messages.The SIM Card MemoryYou can store important messages in a memory on your SIM card. This means that you can find them no matter which phone you use. Messages that are saved in the SIM card memory remain there until you erase them. The maximum number that you can store depends on your SIM card.

Some menus/features are operator dependent.42 Mail ServicesIf the SIM card memory becomes full, the envelope icon starts flashing. The text appears. You will have to erase one or more messages, before you can store any new messages in the SIM card memory.Storing a received message in the SIM card memory1 Press NO.The prompt appears.2 Scroll to the end of the message.The prompt appears.3 Press NO. The prompt appears. 4 Press YES. The message automatically moves from the message memory to the SIM card memory. The dis-play now shows the position of the message. For exam-ple, if it is the third of 15 that the phone can store.Note! You can also store messages you have composed yourself on the SIM card. See “Own Messages” on page 42.Own MessagesYou can store up to 10 standard messages, to be reused whenever you want. The messages must not exceed 30 characters. Creating an Own Message1 Scroll to MAIL and press YES.2 Select Send message.3 Select Own messages.4 Scroll to the end of the message list. The phone prompts: 5 Press YES. 6 Enter the message, see “Composing a Text Message” on page 38, and press YES. The phone prompts 7 Press YES.Sending an Own Message1 Scroll to MAIL and press YES.2 Select Send message.3 Select Own messages.4 Scroll to the message you wish to send and press YES. 5 Press YES to send the message, see “Sending a New Text Message” on page 38.Deleting an Own Message1 Scroll to the message you wish to delete, then press and hold CLR. The phone asks 2 Press YES.

Some menus/features are operator dependent.Mail Services 43Area InformationThe ordinary Short Message Service is a personal service that carries your private messages. Area Information is a text message which is broadcast to all subscribers in a certain network cell at the same time. For example, the information may be a local road report or a local taxi phone number.Note! This feature may not be available on all networks.Turning Area Information On1 Scroll to MAIL and press YES.2 Select Options.3 Select Area info.4 Select On. Turning Area Information Off1 Scroll to MAIL and press YES.2 Select Options.3 Select Area info.4 Select Off.Area Information Message TypesEach type of Area Information message is identified by a three-digit code. At present, the following message types exist:Code AI Message Type000 Index010 News flashes020 Hospitals022 Doctors024 Pharmacy030 Long-distance road reports032 Local road reports034 Taxis040 Weather050 District (base station identity)052 Network information

Some menus/features are operator dependent.44 Mail ServicesNote! These codes are operator dependent. For information about the Area Information services you can use, please refer to the information supplied by your network oper-ator.Area Information Message ListYou can decide which types of area information messages you wish to receive. The phone’s Area info list is depen-dent on the SIM.Inserting an Area Information Code1 Scroll to MAIL and press YES.2 Select Options.3 Select Area info.4 Select Edit list.The number to the left indicates the position in the list. You can scroll forwards and backwards through the list with .5 To insert a code, scroll to the first empty position, using and press YES.6 Enter the new code. (You only need to enter 40 for 040, since the phone adds the leading zero automati-cally.)Erasing or Replacing a Code1 Scroll to MAIL and press YES.2 Select Options.3 Select Area info.4 Select Edit list.5 Scroll to the code you wish to erase/replace and press YES.To erase1 Scroll to Erase?2 Press YES.To replace1 Scroll to Change code? and press YES. 2 Enter the new code and press YES.Receiving an Area MessageWhen you receive Area information, the message is stored in the phone memory. Provided Area info is turned on, you can read the messages via the Area messages function in the Mail menu.054 Operator services056 Directory inquiries (national)057 Directory inquiries (international)058 Customer care (national)059 Customer care (international)Code AI Message Type

Some menus/features are operator dependent.Mail Services 45Reading an Area Message1 Scroll to MAIL and press YES.2 Select Area Messages. 3 Scroll from one message to another.4 To select a message, press YES.Note! The phone only stores one message per code. This means that the message stored previously in a specific code will be overwritten.VoicemailNote! This feature is network dependent.The answering service of your network allows callers to leave a voice message when you cannot answer your calls. When you receive a voicemail, the voicemail icon appears in the display. Entering the Number of Your Voicemail Service1 Scroll to MAIL and press YES.2 Select Options.3 Select Set Voicemail.4 Select New number.5 Enter the number of your voicemail service and press YES.Note! This menu is omitted if the voicemail number is avail-able from the SIM.If the SIM card already contains the number of your operator’s voicemail service, you do not have to enter it. The Set Voicemail menu will not appear. Activating Your Voicemail Function1 Scroll to MAIL and press YES.2 Select Options.3 Select Set Voicemail, On.Calling Your Voicemail Number1 Scroll to MAIL and press YES.2 Select Voicemail.Changing Your Voicemail Number1 Scroll to MAIL and press YES.2 Select Options.3 Select Set Voicemail.4 Select New number.5 Enter your new voicemail number and press YES.Canceling Your Voicemail Function1 Scroll to MAIL and press YES.2 Select Options.3 Select Set Voicemail, Off.

Some menus/features are operator dependent.46 Forwarding CallsIf you want to make certain that your incoming calls are correctly handled when you are unable to answer them, you can use the Call Forward service to forward them to another phone number.Note! If you subscribe to the Alternate Line Service (ALS), you can set different Call Forwards for the two lines, i.e. Line 1 and Line 2.Note! The Call Forward service may not be available on all networks.Activating Call Forward1 Scroll to FORWARD and press YES.2 Select the forward you want:•forward calls if you are already on the phone, On busy.•forward calls that you do not answer within a speci-fied time limit (operator dependent), No reply.•forward calls if your phone is turned off or if you are unreachable, Unreachable.Note! You may use any combination of the above. You may also forward all incoming calls, All calls. A forward indi-cator in the shape of an arrow is shown in the display. If you activate the All calls forward, all other forwards are automatically canceled. However, they are activated again when you cancel the All calls forward.3 Select Activate.4 Enter the phone number, including the area code, to which you want your calls to be forwarded and then press YES.Note! If the phone number is stored in the phone book, you do not need to enter it. Press and then recall the number.Forwarding When the Data Menus are OnIf you have turned the Data menus on, you can set call forwards for your phone, data and fax numbers respec-tively. To forward, proceed as described above.For data and fax numbers, there are only two forward alternatives:•All calls•Unanswered (includes On busy, No reply and Unreachable).Forwarding Calls

Some menus/features are operator dependent.Forwarding Calls 47Checking the Forward StatusChecking the Status of a Certain Call Forward1 Scroll to FORWARD and press YES.2 Select the forward you want.3 Select Get status.The message appears, followed by a message which informs you whether the call forward is activated or not.Checking the Status of All Call Forwards1 Scroll to FORWARD and press YES.2 Select Check all.The message appears, followed by information about all call forwards, i.e. whether they are activated or not.Canceling Call Forwards1 Scroll to FORWARD and press YES.2 Select the forward you want.3 Select Cancel.The message ppears, followed by a message which informs you that the call forward has been canceled.Canceling All Call Forwards1 Scroll to FORWARD and press YES.2 Select Cancel all.The message appears, followed by a message which informs you that all call forwards have been cancelled.

Some menus/features are operator dependent.48 SecurityKeypad LockThe Keypad Lock helps you to avoid accidental dialing, which can happen if you keep your phone in your pocket. An icon in the shape of a key in the display informs you that the keypad is locked. The keypad lock is automatic. This means that if you do not press a key within 25 seconds, the keypad is locked.Note! Calls to the emergency number 911 (or 112) can be made when the keypad is locked. If the phone alarm rings, you can turn it off by pressing any key.The keypad remains locked until you:•answer an incoming call•replace the battery•unlock the keypadNote! The keylock is always disabled if the phone is connected to vehicle handsfree equipment.Activating the Automatic Keylock1 Scroll to SETTINGS and press YES.2 Select Keylock.3 Select Auto.Canceling the Automatic Keylock1 Scroll to SETTINGS and press YES.2 Select Keylock.3 Select Off.Unlocking the keypad1 Press .2 Press YES.The SIM Card LockThe SIM card lock only protects your subscription and not your phone itself from unauthorized use. If you change SIM cards, the phone still works with the new SIM card.Some SIM cards are protected with a PIN at the time of purchase. If the SIM card lock is activated, you have to enter the PIN every time you turn on your phone. If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This is indicated by the message If this happens you need to unlock it to access your subscription.Security

Some menus/features are operator dependent.Security 49Unblocking Your SIM Card 1 Press YES.2 Enter your PUK (or PUK2) which you will find in the information from your network operator.3 Enter a new four- to eight-digit PIN (or PIN2).4 Press YES.5 Re-enter the new PIN (or PIN2) to confirm.6 Press YES.Note! If you enter the wrong PUK 10 times in a row, your card is permanently blocked. If this happens, you should con-tact your network operator.Changing PIN1 Scroll to ACCESS and press YES.2 Select Card Lock.3 Select Change PIN code.4 Enter your old (current) PIN and press YES.5 Enter your new PIN and press YES.The phone asks you to repeat the PIN.6 Enter your new PIN a second time and press YES. The PIN is now changed.Note! If the message appears, this means you entered the new PIN incorrectly. If the message appears, followed by you entered your old PIN incorrectly.Changing PIN 21 Scroll to ACCESS and press YES.2 Select Card Lock.3 Select Change PIN2 code.4 Follow the same procedure as described in “Changing PIN” above.Activating the SIM Card Lock1 Scroll to ACCESS and press YES.2 Select Card Lock.3 Select Lock card 4 Enter your PIN and press YES.The message confirms that the card lock is now activated.Canceling the SIM Card Lock1 Scroll to ACCESS and press YES.2 Select Card Lock.3 Select Unlock card 4 Enter your PIN and press YES.The message confirms that the card lock is now canceled.Note! This only works if your SIM card allows you to cancel the card lock.

Some menus/features are operator dependent.50 SecurityPhone LockThe phone lock protects the phone against unauthorized use if it is stolen and the SIM card exchanged. It is not activated when you buy the phone. You can change the default security code 0000 to any three- to eight-digit personalized code. The phone lock has two levels: Full Lock and Autolock.Full LockIf the Full Lock is activated, you briefly see the message , each time you turn on the phone. The message is followed by the prompt You then have to enter your code followed by YES to use it.AutolockIf the Autolock is activated, the message and the prompt will appear if you insert a new SIM. After the security code has been entered correctly, the phone can be used with the new SIM card. You are not asked to enter the secu-rity code until the original SIM card or a different SIM card is inserted.Changing the Security Code1 Scroll to ACCESS and press YES.2 Select Phone lock.3 Select Change code.4 Follow the steps described in “Changing PIN”.Activating/Canceling the Phone Lock1 Scroll to ACCESS and press YES.2 Select Phone lock.The current setting is shown in brackets.3 Select the setting you want.4 Enter the security code and press YES.The new lock status is displayed.Call RestrictThe Call Restrict service allows you to bar different types of outgoing and incoming calls.Note! This service may not be available in all networks or may require a separate subscription.The following calls can be restricted:•all outgoing calls•all outgoing international calls•all outgoing international calls except to your home country when roaming abroad•all incoming calls•all incoming calls when you are abroad (when roaming)To make sure that a call restrict is not changed by some-one else, you need a password, which comes with your

Some menus/features are operator dependent.Security 51subscription, to activate or cancel a call restrict. You can change the password as often as you like.Changing the Restrict Calls Status1 Scroll to ACCESS and press YES.2 Select Call Restrict.3 Scroll to the option you want and press YES.4 You have three options:• Activate sets a call restrict• Get status lets you check the status of a call restrict•Cancel cancels the call restrict5 Confirm your selection by pressing YES.6 Enter your password and press YES.The message appears, followed by a message which informs you whether the call bar is activated or not.Note! If you forward incoming calls, you cannot activate some restricting options. Likewise, if you restrict calls, you cannot activate some call forward options.Canceling All Call Restricts1 Scroll to ACCESS and press YES.2 Select Call Restrict.3 Select Cancel all.4 Enter your password and press YES.The message appears, followed by a message confirming that all call restrictions are can-celled.Changing the Password1 Scroll to ACCESS and press YES.2 Select Call Restrict.3 Select Change password.4 Enter the old (current) password and press YES.5 Enter the new password and press YES.6 Enter the new password a second time and press YES.The message appears, followed by a message confirming that the password has been changed.Fixed DialingFixed Dialing is a way of restricting outgoing calls. It requires a SIM card that allows fixed numbers to be stored. The fixed numbers are protected by your PIN2. How many numbers you can store depends on your SIM card.The Fixed Dialing function allows calls to be made only to fixed numbers stored on the SIM card. If an attempt is made to call other numbers, the message appears in the display.It is possible to store partial numbers, for example an area code, or an area code followed by the first digits common to several numbers. Storing 919555 allows calls to be made to numbers from 9195550000 to 9195559999.

Some menus/features are operator dependent.52 SecurityNumbers beginning with the international prefix (+) and country code can also be stored, allowing you to make calls abroad.Numbers which include question marks can be stored. For example, storing 91955512?? allows calls to be made to numbers from 9195551200 to 9195551299. To enter a question mark, press and hold #.The Fixed Dialing function does not prohibit calls to the emergency number 911 (or 112) and the Service Center of your network operator. Network services such as Call Forward and Calls restrict cannot be used.Activating Fixed Dialing1 Scroll to ACCESS and press YES.2 Select Fixed dialing.3 Enter your PIN2 and press YES.4 Select On.Canceling Fixed Dialing1 Scroll to ACCESS and press YES.2 Select Fixed dialing. 3 Enter your PIN2 and press YES.4 Select Off.Storing Fixed Numbers1 Scroll to PHONE BOOK and press YES.2 Select Fixed numbers.3 Select Store.4 Enter your PIN2 and press YES.5 Enter the name (optional) and the fixed number in the same way as when storing an ordinary phone number. Editing a Stored Fixed Number1 Scroll to PHONE BOOK and press YES.2 Select Fixed numbers.3 Select Edit.4 After you enter your PIN2, you can change the posi-tion number, the name or the fixed number in the same way as with an ordinary phone number.Deleting a Fixed Number1 Scroll to PHONE BOOK and press YES.2 Select Fixed numbers.3 Select Edit.4 Scroll to the fixed number you want to delete and press CLR.appears.5 Enter your PIN2.6 Press YES.Closed User GroupsThe Closed User Groups (CUG) function is a way of lowering call costs. It depends entirely on your operator and subscription. Not all networks support the function.

Some menus/features are operator dependent.Security 53You can place your most frequently called numbers in groups. On some networks it is cheaper to make calls within a call group. You can also make sure that certain groups can only be called from work, home etc. This makes it difficult for somebody else to use your phone for international calls. You can have a maximum of 10 groups.Selecting a User Group1 Scroll to ACCESS and press YES.2 Select Closed calls.3 Select Group.4 Select the group you want.Calls can only be made within the selected user group. Calling Outside Closed User Groups1 You can decide whether outgoing calls to a non-CUG number are allowed. 2 Scroll to ACCESS and press YES.3 Select Closed calls.4 Select Open calls.5 Select Allowed or Not Allowed. Adding a Name to the CUG List1 Scroll to ACCESS and press YES.2 Select Closed calls.3 Select Edit list.4 Scroll to the group that you want to edit and press YES.5 Scroll to an empty position. The phone prompts you Press YES.6 Enter a name. See “Your Phone Book” on page 22.7 Press YES. Erasing a Position from the CUG List1 Scroll to ACCESS and press YES.2 Select Closed calls.3 Select Edit list.4 Scroll to the group that you want to edit and press YES.5 Scroll to the position that you want to erase and press CLR.6 The phone prompts you 7 Press YES.

Some menus/features are operator dependent.54 Handling Multiple CallsCall Waiting ServiceIf you wish to be able to receive a second call, while another call is in progress, you must activate the Call Waiting service.Note! The Call Waiting service may not be available in all net-works.Activating/Canceling the Call Waiting Service•Scroll to ACCESS and press YES.•Select Call waiting.•Select Activate (or Cancel ). will appear.Checking Status of Call Waiting Service1 Scroll to ACCESS and press YES.2 Select Call waiting.3 Select Get status.Making a Second Call While a Call is in Progress1 Put the current call on hold by pressing YES.2 Enter the number you wish to call and press YESNote! If the phone number is stored in the phone book, you do not need to enter it. Press and then recall the number.Receiving a Second CallIf the Call waiting service is activated, you will hear a tone in the earpiece if you receive a second call. The question appears in the display. You can do one of the following:Putting the Current Call On Hold and Answering the Waiting CallPress YES. The message appears.Rejecting the Waiting CallPress NO or1 Press . The question appears.2 Press YES.The waiting call is rejected. If the caller’s network sup-ports it, the caller will hear a busy tone.Handling Multiple Calls

Some menus/features are operator dependent.Handling Multiple Calls 55Note! If Forward On busy is activated, the waiting call is for-warded to the number you have specified.Ending the Current Call and Answering the Waiting Call1 Press repeatedly until the question appears.2 Press YES.One Call is Active and One Call Is On HoldSwitching between the Two CallsPress YES.Ending the Active Call and Returning to the Call On Hold1 Press followed by YES to select the Handle calls menu.2 Scroll to Release active? and then press YES. or1 Press NO, Retrieve Held Call appears. 2 Press YES to retrieve.Ending Both Calls1 Press followed by YES to select the Handle calls menu.2 Scroll to Release all calls? and then press YES.Joining the Two Calls (Call Transfer)1 Press followed by YES to select the Handle calls menu.2 Scroll to Transfer call? and then press YES.The two calls are now connected to each other, and you are disconnected from both calls.Note! The Call Transfer service may not be available on all net-works. Joining the Two Calls into a Conference Call1 Press followed by YES to select the Handle calls menu.2 Select Join calls?.3 See “Conference Calls” on page 56.Receiving a Third CallIf the Call Waiting service is activated, you may receive a third call when you have one active call and a second call on hold. You hear a tone in the earpiece and the ques-tion Release and answer? appears in the display. You can do one of the following:Ending the Current Call and Accepting the Waiting CallPress YES.The waiting call becomes active and the call on hold remains on hold.

Some menus/features are operator dependent.56 Handling Multiple CallsRejecting the Waiting CallSelect Busy? using .The third call is rejected. Provided the caller’s network supports this function, the caller will hear a busy tone.Note! If Forward On busy is activated, the waiting call is for-warded to the number you have specified.Conference CallsNote! The Conference Call service may not be available on all networks.To create a conference call, you must have one active call and one call on hold.Joining the Two Calls into a Conference Call1 Press followed by YES to select the Handle calls menu.2 Select Join calls?.Adding New Participants to the Conference GroupYou can put the conference group on hold and then add new participants.1 Press YES to put the conference group on hold. 2 Call the third person you wish to include in the con-ference group.3 Press followed by YES to select the Handle calls menu.4 Select Join calls?.You can include up to five participants, other than your-self, in the conference group by repeating steps 1 to 4 above.Reviewing the Participants in the Conference Group1 Press followed by YES to select the Handle calls menu.2 Scroll to Conference participants and then press YES.3 The first participant’s phone number is displayed. If the participant’s number and name is stored in the phone book, the name is displayed instead.4 Scroll with to see the other participants’ numbers (names).Having a Private Conversation with One ParticipantIf you wish to have a private conversation with one of the participants, you can extract that participant from the conference and put the other participants on hold.1 Press followed by YES to select the Handle calls menu.2 Select the participant you wish to speak in private.

Some menus/features are operator dependent.Handling Multiple Calls 57To rejoin the participant to the confer-ence group1 Press followed by YES to select the Handle calls menu.2 Select Join calls?.Releasing Participants from the Conference GroupYou can release participants from the conference group.1 Press followed by YES to select the Handle calls menu.2 Select the participant you wish to release.Making a Call while a Conference Call Is in ProgressYou can put the conference group on hold and make another call. You can then switch between the new call and the conference call.1 To put the conference group on hold, press YES.2 Enter the number you wish to call and press YES.Switching Between the New Call and the Conference GroupPress YES.Ending the New Call and Returning to the Conference Group1 Put the conference group on hold.2 Press followed by YES to select the Handle calls menu.3 Select Release active?.Ending the Conference CallClose the flip or press NO.

Some menus/features are operator dependent.58 NetworksSearching for NetworksWhen you turn on the phone, it searches for the last accessed network. If this is not within range, you may use another network, provided your home network has an agreement that allows you to do so. This is called Roaming. The order of preference in which the phone selects a net-work is determined by a list of preferred networks on your SIM card. The NETWORKS menu includes a number of func-tions that let you determine how the phone searches for a network. You may also select a network yourself from those within range.Selecting a New Network1 Scroll to NETWORKS, and press YES.2 Select Select net.3 The message is displayed briefly. The display then shows either:•the name of a network, followed by the message Current, Preferred, Available, or Forbidden. For an explanation of the message, see the table. Instead of the full name of a network, an abbrevia-tion may be displayed. To see the full name of a net-work, press *.•the message indicates that no net-work is within range.4 If there is more than one network within range, you can scroll through the network names and choose the network you want by pressing YESNetworksMessage MeaningThe network is currently being used.Your home network is within range. You can select it.The name of the network is included in a list of preferred networks on your SIM card. You can select this network.The name of the network is included in a list of forbidden networks on your SIM card. You can normally not select this network. See “List of Preferred Networks” on page 59.

Some menus/features are operator dependent.Networks 59Starting an Automatic Network Search1 Scroll to NETWORKS and press YES.2 Select New search.The phone automatically starts searching for a net-work according to the list of preferred networks stored on your SIM card.List of Forbidden Networks The names of the forbidden networks are stored on your SIM card. If such a forbidden network is within range, it is left out when the phone searches for a network (auto-matic search mode).If your home network and a forbidden network come to an agreement that allows you to use the forbidden net-work, you can select this network even though the mes-sage is displayed.List of Preferred NetworksYou can create a list that defines in which order your phone will select a network during automatic network selection, when your home network is not within range.The number of networks that can be stored in the list depends on your SIM card.The Edit list function lets you review the networks in the list. Apart from rearranging the order of the net-works, you can add new networks to the list and delete networks from it.Reviewing the List of Networks1 Scroll to NETWORKS and press YES.2 Select Edit list. 3 The name of the first network is displayed. 4 Scroll through the networks in the list.Note! To see a network’s full name, press *.Adding a Network to the List1 Scroll to NETWORKS and press YES.2 Select Edit list.3 Scroll to the first free position in the list and press YES. The prompt appears. 4 If you scroll to a position that is already occupied, press YES and then scroll with the arrow keys until appears.The name of the network is not included in the preferred or forbidden list on your SIM card. You can select this network, but you might not be able to use it.Message Meaning

Some menus/features are operator dependent.60 Networks5 Press YES and scroll with or until you find the network that you want. If the desired network does not appear, press YES when the question appears. 6 Enter the three-digit country number and the two- or three-digit network number.7 Press YES to add the network to the list.Erasing a Network from the List1 Scroll to NETWORKS and press YES.2 Select Edit list.3 Select the network you wish to erase.4 Scroll to Erase and press YES.Re-arranging the List1 Scroll to NETWORKS and press YES.2 Select Edit list.3 Select the network you wish to move. is displayed. 4 Press YES and enter the new position within the list.Search ModesWhen you turn on your phone, it searches for a net-work. This can be done in two different ways, depend-ing on the search mode that is activated. Automatic search mode is usually the default. Automatic search mode means that your phone searches for the last accessed network first. If this is not available, it automatically searches for another available network within range. Manual search mode means that your phone searches for the last accessed network first. If this is not available, the question appears.•Select a network as described in “Selecting a New Network”.Activating Automatic Search Mode1 Scroll to NETWORKS and press YES.2 Select Search mode.3 Select Auto.Activating Manual Search Mode1 Scroll to NETWORKS and press YES.2 Select Search mode.3 Select Manual.

Some menus/features are operator dependent.Voice Activation 61The phone is equipped with a built-in voice recognition system known as Voice Activation. This system allows you to:•voice dial •answer and reject calls.To call someone, you only need to press the upper side volume key or YES, say the voice label associated with that person and the phone automatically dials his or her number. To answer and reject calls, you only need to say for example “Answer” and “Busy”.Note! Best performance is obtained by holding the phone as you would when on a call, with the phone up to your ear, the flip down, and in a silent environment.Recording Voice Dialing LabelsYou can record (save) a voice label together with a name and number in your phone book. The voice label and the name do not have to match. That is, you can store a number with the name “Home” (that is what you see in the display when searching for a number in your phone book), but your voice label might be “Jenny”. The voice labels are stored on your phone. You will need to record new voice labels if you change phones. You will also need to record new voice labels if you change SIM cards. The message will appear when you insert a new SIM and attempt to acti-vate the Voice Dial feature.If you insert a new SIM card and attempt to record a new voice label, will appear. Press NO to keep the original labels.Note! Your phone can hold up to 10 different voice labels.Activating the Voice Dialing function1 Scroll to SETTINGS and press YES.2 Select Voice dial.3 Select On.Adding a Voice Dialing Label to an Existing Phone Book Entry1 Scroll to PHONE BOOK and press YES.2 Select Edit.3 Scroll Find name or Find pos.4 Enter the name you want to add a voice label to and press YES. After a few seconds is displayed.5 Press YES again to store.Voice Activation

Some menus/features are operator dependent.62 Voice Activation6 Press YES. You are prompted to speak after a tone (beep).7 Say the voice label that you want to be stored with the phone book entry. The voice label is played back to you.8 If you are satisfied, press YES to store the voice label. Otherwise, press NO and then repeat steps 2 and 3.The voice label icon appears next to the posi-tion number .Creating a Voice Dialing Label and New Phone Book EntryNote! For more information, refer to “Your Phone Book” on page 22”.1 Enter the area code and phone number you wish to store.2 Scroll to PHONE BOOK and press YES.3 Select Store.The first free memory position is suggested.4 Enter the name tag that you want to associate with the number. 5 Press YES. appears.6 Press YES to record.7 Say the voice label after the tone. The voice label is played back to you.8 If you are satisfied, press YES to store the voice label. Otherwise, press NO and follow the prompts.Once stored in your phone book, the voice label icon appears next to the position number. Recording ProblemsIf the phone could not detect any speech, one of the following might have happened:•the name of the voice label was too short.•the background noise of your recording location was too loud.•you spoke too softly.•you spoke before the beep.Try to change one of these factors and repeat “Adding a Voice Dialing Label to an Existing Phone Book Entry” or “Creating a Voice Dialing Label and New Phone Book Entry”.Replacing a Voice Dialing Label1 Scroll to PHONE BOOK and press YES.2 Select Edit.3 Scroll to Find name or Find pos.4 Enter the name with the voice label you want to replace and press YES. The name and number is dis-played and the label is played.5 Press YES to select.After a few seconds, is dis-played.

Some menus/features are operator dependent.Voice Activation 636 Press YES. Then follow the phone’s prompts.Erasing a Voice Dialing Label1 Scroll to PHONE BOOK and press YES.2 Select Edit.3 Scroll to Find name or Find pos.4 Enter the name with the voice label you want to erase and press YES. The name and number is displayed and the voice label is played.5 Press YES to select.After a short while is dis-played.6 Press . is displayed.7 Press YES to erase the voice label. appears.Voice Label ListIf the Voice Dialing function is on, the PHONE BOOK menu includes a Voice Label list. When selected, you can scroll through the names and numbers which have a voice label attached. When such a number is displayed, its voice label is played back. You can call the number by pressing YES.Selecting the Voice Label List1 Scroll to PHONE BOOK and press YES.2 Select Voice label list.3 Scroll through the list to hear the labels.Using Voice DialingOnce you have recorded your voice labels and the Voice Dialing function is on, you can start using the Voice Dialing system. It is actually very easy to use.Making a Call While Handheld1 Open the flip.2 Clear the display using CLR.3 Press and hold the YES key, or the press the upper side VOLUME key briefly4 Say the voice label after the prompt.Calling While in Handsfree1 Press the upper side VOLUME key or YES briefly.2 Say the voice label after the prompt.Note! Voice Dialing will work with the flip opened or closed when in Handsfree mode. Closing the flip will not ter-minate the call when in Handsfree.

Some menus/features are operator dependent.64 Voice ActivationRecording the Voice Answering LabelsThe words that you choose to accept and reject calls can be any word in any language, but the recording time is limited. Try to make the words unique and not too short. In the example below, we have chosen the com-mands “Answer” to accept and “Busy” to reject incom-ing calls. The first time you turn the phone’s Voice Commander on, you are asked to train it. You start the training by saying a command (voice label) for accepting, then you continue with a command for rejecting.Initially Activating and Training the Voice Commander 1 Scroll to SETTINGS and press YES.2 Select Voice ans, On.3 Wait three seconds and the question appears.4 Press YES.You start by training the voice commander to recog-nize the command for accepting calls.5 Say the command you want to use.The command is played back to you. 6 If you are satisfied, press YES to save the command (voice label). Otherwise, press NO and then repeat the process.7 The phone now prompts you to enter a voice com-mand for rejecting calls: . Follow the phone’s prompts. Be sure that you have two different words for accepting or rejecting. Replacing the Voice Answering Labels1 Scroll to SETTINGS and press YES.2 Select Voice answer.3 Select Replace voice label.4 Wait three seconds and the question appears.5 Follow the phone’s prompts.Answering or Rejecting a Call Using Voice ActivationBe certain the Voice answer option in SETTINGS menu is activated. The phone’s flip must be opened or the phone must be attached to an Ericsson Handsfree accessory to use this feature. When you receive an incoming call, clearly say the voice command that you have recorded.

Some menus/features are operator dependent.Extra Features 65Call Time and Call CostCall InformationThe display shows the duration of a call in progress. When you end the call, the call duration information is shown for another five seconds. If your network and SIM card support this feature, you can have the call cost (or the number of call units) displayed.Selecting the call information you want1 Scroll to SETTINGS and press YES.2 Select Call info.3 Select Time: Outg, Time: All or Cost.Checking the time/cost of the last call1 Scroll to INFO and press YES.2 Select Last call.Depending on the setting in the Call info function in the SETTINGS menu, you can now check:•how long your last call was (Time: Outg or Time: All)•the cost (or the number of call units) of the last call (Cost).Total Call Time or Call CostChecking the total call time or call cost1 Scroll to INFO and press YES.2 Select Tot calls.3 Depending on the setting in the Call info function in the SETTINGS menu, you can check:•the total time of all outgoing calls (Time: Outg)•the total time of all calls (Time: All)•the cost (or the number of call units) of all calls (Cost)Resetting the total call time/cost counter1 Scroll to INFO and press YES.2 Select Tot calls.3 Select Reset?.Note! If you have chosen the call cost option, you must enter your PIN2 to reset the counter.Determining the Call CostIf you select the Cost option in the Call info function in the SETTINGS menu, the Price function appears in the INFO menu. However, to be able to use the Price func-Extra Features

Some menus/features are operator dependent.66 Extra Featurestion, both your network and your SIM card must sup-port it.The Price function lets you enter and vary the price per call unit. The price entered is stored on your SIM card.Note! If you do not specify a price per call unit, the number of call units will be displayed during a call, and in the Last call and Tot calls functions.Entering the Price Per Call Unit1 Scroll to INFO and press YES.2 Select Price.3 Select New price.4 Enter the code for the currency you want, for example USD for U.S. Dollars, and then press YES.5 Enter the price per call unit, for example 0.75, and press YES. To enter the decimal point, press #.6 Enter your PIN2 and then press YES. (The PIN2 prompt may not appear in some networks.)Reverting to Call Units1 Scroll to INFO and press YES.2 Select Price.3 Select New price.4 Enter your PIN2 and then press YES.Credit Limit for CallsIf both your network and SIM card support this feature, you can enter a total amount of money that can be used for making calls. This could be useful when you lend your phone to someone, for example, and do not want their call costs to exceed an amount specified by you. The cost is deducted from this amount while you are engaged in a call. When the amount reaches zero, no more calls can be made.Setting the Credit Limit1 Scroll to INFO and press YES.2 Select Credit.3 Select New credit.4 Enter the amount, for example 20 dollars ($20.00), and then press YES.5 Enter your PIN2 and then press YES.Calling Card or Credit Card CallsWhen making international or long distance calls, you may not want your operator to charge you on your nor-mal account. If you have a credit card or a calling card, you may want to re-direct the charges to one of those accounts instead. Your phone is all set for making this procedure as easy as possible for you.

Some menus/features are operator dependent.Extra Features 67Note! The Calling Card and Credit Card Call feature is net-work dependent.Activating the Calling Card Feature1 Scroll to ACCESS and press YES.2 Select Call cards security.3 Enter your security code and press YES.4 Scroll to Call cards, YES, On, YES.The Call card function is now activated and the sub-menu Call card numbers is visible in the PHONE BOOK menu.Changing Security Codes1 Scroll to ACCESS and press YES.2 Select Call cards security.3 Enter your security code and press YES. 4 Scroll to Change code and press YES.5 Enter your new code and press YES.The code can consist of four to eight digits.6 When appears in the display, confirm your new code.7 Press YES.Your security code is now changed.Storing Credit or Calling Card NumbersYour phone allows you to store two calling card numbers in the PHONE BOOK menu. This sub-menu is only visible if the Call card function is activated in the ACCESS menu.Storing a Calling Card Number:1 Scroll to PHONE BOOK and press YES.2 Select Call card numbers.3 Enter your security code and press YES. To change security codes, see above.4 Select card position (Card 1 or Card 2).5 Enter the access number (the phone number) to the calling card server. The numbers are entered in the same way as in the ordinary phone book.6 Press or .7 Enter the verification code to your calling card server.8 To store the calling card number, press YES. 9 Select Call no. then Ver no. or Ver no. then Called no.Selecting a CardIf you have stored two card numbers, you must select which card you wish to use before making a Calling/Credit card call. 1 Scroll to PHONE BOOK and press YES.2 Select Call card numbers.3 Enter your security code and press YES.4 Scroll to the card you wish to use.Your settings for the card appear. To select the card, press YES. Note! If you only use one card number, this selection does not have to be repeated every time you wish to make a Call-ing/Credit card call.

Some menus/features are operator dependent.68 Extra FeaturesMaking a Credit or Calling Card Call1 Enter the number you wish to dial, or retrieve it from the PHONE BOOK.2 Press and hold YES.The access number to the calling card server is called and during the connecting phase, you are prompted to send the called number (the number or the person you want to call) and the verification code, in the order chosen by you (see above).To send the called number and the verification code during the connecting phase, press YES when the dis-play shows and Editing or Deleting a Calling Card Number 1 Select PHONE BOOK menu.2 Select Call card numbers and enter your security code when prompted.3 Select Card1 or Card2.4 Press and hold CLR to clear the entire line. Use to move to the next line. Press and hold CLR to clear this line.5 Press YES to store your change.Using Two Voice LinesNote! This service may not be available on all networks and may require a separate subscription.Your phone supports two voice lines ALS with different phone numbers, Line 1 and Line 2. This is useful if you want to keep business calls and private calls on separate lines. You can only send and receive text messages (SMS) on Line 1. The line currently selected is indicated in the display with a line indicator and the digit 1 or 2.Changing to the Other Line•Scroll to Change to Line X and press YES.From now on, all outgoing calls are made on the line you just selected. Receiving a Call on One of the LinesWhen someone calls you, the question is replaced by or depending on which line the person is calling.Note! If you are on a call on one line, you must end that call first before answering a call on the other line (dependent on the activation of the Call Wait function).Different Settings for Each LineYou can personalize the names of the two lines. You can also have different settings for each line, for example: the tone of the ring signal, call forwards, call bars and call

Some menus/features are operator dependent.Extra Features 69waiting. You set these functions separately when the line is activated. The call meters in the INFO menu show the call times (call costs) for the line currently selected.Changing the Name of a Line1 Scroll to SETTINGS and press YES.2 Select Line 1 Tag (or Line 2 Tag).3 Enter a new name (maximum 12 characters).4 Press YES.Note! The name tag is only shown in Alternate Line Service menu and during an incoming call.Calling from Your CarBy using the Ericsson portable or vehicle handsfree solu-tions, you can be on the phone without using your hands to hold it.Handsfree TypesIf you use a Vehicle Handsfree Solution, you can choose between two different ways in which your phone can handle the speech. This is done in the Handsfree sub-menu.Handsfree Type 1Handsfree Type 1 means that the phone handles the call in semi-duplex mode. This means that you cannot speak at the same time as the person at the other end of the line. Use this alternative only if Type 2 does not work properly.Handsfree Type 2Handsfree Type 2 means that the phone handles the call in full duplex mode. This considerably increases the quality of speech, since you do not have to wait until it is your turn to speak, and the speech becomes clearer.For Handsfree Type 2 to work properly, your phone adapts to the sound environment around the handsfree equipment. This adaptation might take a few calls. Dur-ing this learning phase, the person you are talking to might hear an echo of his or her own voice (because the sound goes from the speaker into the microphone again). However, this disappears as the other person speaks. If the echo lasts longer than the first few calls, try Handsfree Type 1 instead.Note! More sophisticated Vehicle Handsfree solutions auto-matically provide full duplex. They also disable the choice between Handsfree Type 1 and 2, since the choice becomes superfluous when using this kind of equipment; you always get the best quality of speech possible.Setting the Handsfree Type1 Scroll to SETTINGS and press YES.2 Select Handsfree.3 Select the type you want.

Some menus/features are operator dependent.70 Extra FeaturesOther Handsfree-Related SettingsApart from the settings mentioned above, you can change the following settings when using handsfree equipment:•Ring level•Ear volume•Ring type•Display lightEach of these settings can be specified separately when you have your phone connected to handsfree equip-ment. This means that if you choose one of these set-tings when the phone is connected to handsfree equipment, the settings when it is handheld are not affected and vice versa.Changing a Setting1 Connect the phone to the handsfree equipment.2 Change the setting according to the instructions in “Personalizing Your Phone” on page 30.Answering ModeThe submenu Answering mode, in the SETTINGS menu, includes two functions: Any key and Auto, which are useful when you use the phone with handsfree equip-ment.•Any key: If you use the phone with handsfree equipment and this function is turned on, you can answer an incoming call by pressing any key, except the NO key.•Auto: If you choose the automatic answering mode, an incoming call is answered automatically after one ring signal.Selecting Answering Mode1 Scroll to SETTINGS and press YES.2 Select Answering mode.3 Select a mode.Sending and Receiving Faxes and Data If you have a SIM card that does not support separate fax and data numbers, you need to activate the data menus. When the DATA menus are activated, a new menu appears in your phone: NEXT CALL TYPE.Note! An authorized Ericsson modem and a PC are required to support Data and Fax transmission.Activating the Data Menus1 Scroll to SETTINGS and press YES.2 Select Data Menus.3 Select On.

Some menus/features are operator dependent.Extra Features 71Next Call TypeThis function allows you to decide which type the next incoming call will be, i.e. fax, data, or speech. You will only see this menu if your phone detects that you do not have separate numbers for data, fax and speech. Once you have set your phone for a specific incoming call, it will stay so until you change it back. The normal setting is Speech.Defining the Next Incoming Call1 Scroll to NEXT CALL TYPE and press YES.2 Select which type the next incoming call will be.AlarmThe phone has an alarm function. When it is activated, an icon in the shape of a bell is shown next to the cur-rent time in the display.The alarm signal sounds at the time set, even if the phone is turned off. The keys will illuminate and the display will flash. The volume of the alarm signal depends on the setting of the ring signal.The alarm signal will sound for 60 seconds and will be repeated every nine minutes, if you do not turn it off. After 60 minutes, the repeat function will be turned off automatically.Setting the Alarm1 Scroll to TO OL S and press YES.2 Select Set alarm.3 Enter the time in hours and minutes.If you have selected the 12-hour format in the Clock/Date function in the SETTINGS menu, you can alternate between am and pm by pressing #.4 Press YES.Turning Off the Alarm 1 Press any key to turn the alarm signal off when it sounds.2 If you do not want the alarm to be repeated, press YES. 3 Press NO to snooze.or1Scroll to TOOL S and press YES.2 Select Set alarm, Off.CalculatorThe phone’s built-in calculator can add, subtract, divide, and multiply.Using the CalculatorIn this example we are going to divide 134 by 32.

Some menus/features are operator dependent.72 Extra Features1 Scroll to TOOL S and press YES.2 Select CALCULATOR.3 Enter 134.4 Scroll with to the division sign (/) and press YES.5 Enter 32.6 Scroll with the to the equal sign (=) and press YES.You can also press # to get the answer.7 To clear the display, press CLR.Entering a Decimal PointPress *.Entering the Multiplication Sign (*)Press * twice.Quick KeysSeveral keys on your phone can be used to optimize the phone’s functionality and decrease the number of times you need to press a key. Some of the key combinations demand that your phone is in a certain mode and some can be made from the standby mode. The table below describes some of the most useful key combinations.To… Do this: Mode:mute the microphone press and hold CLR when on the phonequickly access voicemail press and hold the 1 key when in standbyquickly access phone book alphabetically (only available for keys 2-9)press and hold the 2 key to access letters A-Cpress and hold the 3 key to access letters D-F Use to scroll. when in standbyreach second letterpress and hold the upper volume key and press the desired numeric keywhen entering lettersreach third letterpress and hold the lower volume key and press the desired numeric keywhen entering lettersreject a calldouble-click on either volume key or press 0 and YESwhen receiving a call

Some menus/features are operator dependent.Extra Features 73speed dial press 1 – 9 and YES when in standbymove three lines forward press 3when reading a messagereturn to beginning of message press and hold when reading a messagemute ringerpress and hold CLRpress and hold again to releasein standbyTo… Do this: Mode:

Some menus/features are operator dependent.74 TroubleshootingThis chapter lists some problems that you might encounter while using your phone. Some problems require that you call your service provider, but most of the problems you encounter are easy to correct yourself.Error MessagesInsert cardThere is no SIM card in the phone. Insert a SIM Card.SearchingIf the message remains in the display, you are within range of a network but you are not allowed to use it. However, in an emergency, some operators allow you to call the emergency number 911 (or 112). See “Making Emergency Calls” on page 19.No networkThere is no network within range or the received signal is too weak. You have to move to get a signal that is strong enough. Wrong PIN, Wrong PIN2You entered your PIN or PIN2 incorrectly.Enter the correct PIN or PIN2, and press YES. Your SIM will be blocked after three unsuccessful attempts.Matching errorWhen you want to change a security code (for example PIN) you have to confirm the new code by entering it again. The two codes that you have entered do not match. See “The SIM Card Lock” on page 48.PIN/PIN2 Blocked. Unblock?You entered your PIN or PIN2 incorrectly three times consecutively. To unblock see “The SIM Card Lock” on page 48.BLOCKED Contact card providerYou entered your PUK incorrectly 10 times consecu-tively. Contact your network provider or service opera-tor.Phone lockedThe phone is locked. To unlock the phone, see “Phone Lock” on page 50.Enter lock codeYour phone comes with the default security code, 0000. You can change it to any three- to eight-digit personal-ized code. See “Phone Lock” on page 50.Troubleshooting

Some menus/features are operator dependent.Troubleshooting 75Number not permitted•The Closed User Groups function is activated and the number you have dialed is not part of a group. See “Closed User Groups” on page 52.•You have Fixed Dialing Numbers activated, but you have dialed a number that is not permitted on the Fixed Dialing Numbers list.Phone Does not Come OnHandheld PhoneRecharge or replace the battery.Handsfree Phone in VehicleMake sure that the phone is properly inserted into its holder.Poor Sound Quality in Handsfree Equipment•Check that the handsfree equipment is Ericsson original equipment and that it has been properly installed,•Change the Handsfree Type from Type 1 to Type 2. See “Handsfree Types” on page 69.Voice Answering Does Not Perform WellTry changing the voice labels for accepting and rejecting calls.Voice Recording Problems•The name of the voice label was too short.•The background noise of your recording location was too loud.•You spoke too softly.•You spoke before the beep.Try to improve one of these elements when you repeat the voice label recording process.Technical SupportIf you need additional information or assistance, or would like to purchase Original Ericsson Accessories: in North America call 1-800-ERICSSON (374-2776) ; in Latin America call 305-755-6789 ; all other countries call 919-472-7908.

Some menus/features are operator dependent.76 TerminologyAcronym ListGlossaryActive FlipThis factory default feature allows you to easily answer and end calls without the use of the keypad. Advice of Charge (AoC)Enables you to monitor the cost of calls made from your mobile phone. Details of the last call and total calls made are shown in the phone display. Alternate Line Service (ALS)Enables you to have two lines and two different phone numbers on one subscription for your mobile phone. This makes it possible to have separate numbers for business and personal calls. To use this service, it must be supported by your network.Area InformationA service that allows you to receive messages about pre-set topics i.e. weather forecasts, road reports, etc. To use this service, it must be supported by your network. Calling Line Identification (CLI)Shows the number of the person calling you in your mobile phone display. You can then make an informed choice as to whether or not to take the call. Bear in mind that not all numbers can be displayed. To use this ser-vice, it must be supported by your network.TerminologyAoC Advice of ChargeALS Alternate Line ServiceCLI Caller Line IdentificationDTMF Dual Tone Multiple FrequencyGSM 1900 Global System for Mobile Communication (1900 MHz)PIN Personal Identification NumberPUK Personal Unblocking KeySIM Subscriber Identity ModuleSMS Short Message Service

Some menus/features are operator dependent.Terminology 77CipheringCiphering is a built-in feature that “scrambles” your calls and messages to provide additional privacy. An exclama-tion point next to the phone icon during a call indicates that ciphering is currently not available from the service provider.Closed User GroupsThis feature limits outgoing calls to specified numbers. This can be very useful when operators give lower rates for specific groups. To use this service, it must be sup-ported by your SIM. DTMF or Touch ToneDual Tone Multi Frequency signal – codes sent as tone signals. Used for telephone banking, for accessing an answering machine, etc.Fax ClassStandards for fax transmission are set as classes. Class I and II allow data transfer speeds of between 2400 up to 9600 bps.Fixed Dialing Numbers Enables you to allow only numbers beginning with cer-tain pre-defined figures to be dialed from your mobile phone. The service is activated by PIN2. To use this ser-vice, it must be supported by your SIM. ForwardEnables you to forward calls to another number, for example your voicemail or home phone.Full Duplex In handsfree equipment, means that both parties on the phone can talk at the same time.GSM 1900 Also known as PCS 1900, is a digital network working on a frequency of 1900 MHz. It is used in the United States, Canada, and some Latin American countries.Handsfree An important safety feature for mobile phones that allows drivers to use their car phone without lifting or holding the handset to their ear.International Prefix (+) Mobile phone (+) prefix that automatically adds the cor-rect international code in front of a telephone number when dialling out of a country. You then have to add the code of the country you are calling.

Some menus/features are operator dependent.78 TerminologyLine 1/Line 2See “Alternate Line Service” on the previous page.Menu SystemThe easiest way to access all the phone’s functions. The menus are arranged to be accessed and viewed when scrolling with the arrow keys.NetworkA mobile phone network or system consists of a network of cells. A radio base station serves each cell from where calls are forwarded to and received from your mobile phone by wireless radio signals.OperatorTo be able to use your phone, you need a subscription to a network. You get this subscription from a network operator, together with a SIM card that you need to use with your phone. Phone Book A memory in your mobile phone where phone numbers can be stored and accessed by name (alpha memory search) or position.PC-CardAlso called PCMCIA, the PC-card can act as a modem and connect your mobile phone to a laptop or organizer, enabling data and fax transmission. The thin type II card is the most common size. Type III is a thicker card and can house more than modem functionality.PINPersonal Identification Number – a code used for all GSM-based phones to establish authorization for access to certain functions or information. The PIN code comes with your subscription. PIN2Personal Identification Number 2 – an authorization code which is used only for special services.PUKPersonal Unblocking Key – used to unlock a blocked SIM card. This comes with your subscription.Restrict Calls Enables you to restrict certain or all types of calls to and from your mobile phone, i.e. outgoing calls, outgoing international calls, incoming calls. Restricting is acti-vated with a personal code. To use this service, it must be supported by your network.Roaming You are outside of your home network.Semi-Duplex In handsfree equipment, full duplex means that the con-nection is open for both parties to talk simultaneously.

Some menus/features are operator dependent.Terminology 79Semi-duplex gives close to, but not complete, duplex functionality. Service Provider A company that provides services and subscriptions to mobile phone users. Short Message Service (SMS)Allows messages of up to 160 characters to be sent and received via the network operator’s message center to your mobile phone. Messages are stored if the phone is off or out of reach ensuring that they reach you. To use this service, it must be supported by your network. ScrollPressing or to move between the menus.SelectScrolling to a menu then pressing the YES key on the phone.SIM Card Subscriber Identity Module card – a card that must be inserted in any GSM-based mobile phone. It contains subscriber details, security information and memory for a personal directory of numbers. The card can be a small plug-in type or credit card sized but both types have the same functionality.StandbyThe mode where your phone has been cleared of all menu items and features. If there is no action within a minute, the phone will automatically revert to standby.SubscriptionIs the contract that you have with the service/network provider. To use your phone, you need to have a sub-scription to a network. You get a SIM (Subscriber Iden-tity Module) card with your subscription. The services included in your subscription depend on your choice of operator and/or subscription. So some of the services and functions described in this manual may not be accessible to you. If you want a complete list of the ser-vices included in your subscription, please contact your network operator.VoicemailA computerized answering service that automatically answers your call, plays a greeting in your own voice and records a message.Voice ActivationA feature that allows a subscriber to place a call or answer a call by spoken commands.Voice RecognitionThe capability for mobile phones, PCs, and other com-munications devices to be activated or controlled by voice commands.

Some menus/features are operator dependent.80 Terminology

Some menus/features are operator dependent.81AAlternate Line Service (ALS)68Answered calls indicator27Answering calls19Area information43message types43receiving area messages44Auto Store35BBattery11attaching11charging1112recycling8Battery charger12Blasting6CCalculator71Call costspecifying price per unit65Call forwardactivating46canceling47checking status47forward indicator46Call list27activating28Call Restrictingchanging status51Call waiting54Call waiting serviceactivating54Callingfrom phone book25Callsanswering19ending19putting on hold20545657receiving19redialing18rejecting20switching between calls55CB. See Area informationCell broadcast. See Area informationChanging PIN49Children6Clock. See TimeClosed user groups52Conference calls56adding new participants56Credit cards66DDate35Dialed numbers indicator27Displaygreeting text33language33light33DTMF tones21EEarpiecevolume20Embedded Numbers40Emergency calls19Ending calls19Entering Special Characters22Error messages74FFax, sending and receiving70Fixed dialing51activating52canceling52Fixed numbers52editing52storing52Index

Some menus/features are operator dependent.82Flip151957Forbidden networks59Forward indicator46GGreeting text in the display33HHandsfree usage69IIndicators in display27answered calls27dialed numbers27missed calls27phone icon22International calls19International emergency number19KKey functions15Key sound33Keypadunlocking48Keypad lock48LLanguage in the display33Letters, entering22MMaster Reset35Memory full24Message signal33Message types (SMS)38Microphonemuting20Minute minder32Missed calls28Missed calls indicator27Muting microphone20NName recall25Network58forbidden59preferred59search modes60selection58Numbers, Embedded40PPacemakers6Personal ring signal31Phone Bookauto store35calling from25changing a name26changing phone number25erasing phone number24keeping up to date25Phone icon22Phone lock50auto lock50full lock50Phone numberdisplaying own34PINchanging49PIN213changing49Plus sign (+)19Position recall25Preferred networks59PUK49QQuick dialing. See Speed dialingRReceive calls19Receiving messages (SMS)39Redialing numbers18Rejecting calls20Request reply (SMS)38Restrict Calls50canceling all51changing password51

Some menus/features are operator dependent.83changing status51Ring signalchoosing31composing own32level30personal31type30SSafety Guidelines5Scratch pad20Scrolling15Sending messages (SMS)38Showing your number28SIM card10inserting11removing11unblocking49SIM card lockactivating49canceling49SMScomposing38editing38enabling phone for sending37message types38receiving39repeating message38reply requested38sending38storing41types38Special Characters22Speed dialing25Stored messages (SMS)reading40TTime34format34setting35Tone signals21Touch tones21VVoice labelicon2362recording61Voicemailactivating45calling45Volumeearpiece20keys20ring signal30

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA