HARRIS TR-422-A2 Dual Mode TDMA Cellular Handset User Manual Manual

HARRIS CORPORATION Dual Mode TDMA Cellular Handset Manual

Contents

Manual

Para obtener una copia en español de esta Guía del Usuario, visite nuestra página Web en www.ericsson.com/phones o, si se encuentra en Estados Unidos, también puede llamar al 1-800-374-2776.Register your new phone, purchase Ericsson original accessories and see the latest in products by visiting us at: www.ericsson.com/phones8/01 PBMThis manual is published by Ericsson Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Ericsson Inc., at any time and without notice.Such changes will, however, be incorporated into new editions of this manual.“Ericsson”, “Ericsson LLLL” and “ERICSSON ORIGINAL ACCESSORIES” are each registered U.S. Trademarks owned by Telefonaktiebolaget L M Ericsson of Sweden.“Microsoft”, “Windows” and the design plus words “Microsoft Windows” are each either registered and/or pending U.S. Trademarks owned by Microsoft Corporation of Redmond, Washington, U.S.A.Trademarks referred to herein are trademarks of their respective companies.T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro.Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT,NL,PT.ES,SE,GB; and additional patents are pending worldwide.The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A.Some menus/features are dependent on your service provider.© 2001, Ericsson Inc. All rights reserved.Publication Number: AE/LZT 123 XXXX R1Printed in USADitto Nicole.book Page i Tuesday, August 28, 2001 11:11 AM
Ditto Nicole.book Page ii Tuesday, August 28, 2001 11:11 AM
iTable of ContentsGuidelines for Safe and Efficient Use ............... 1Product Care and Maintenance....................... 1Antenna Care.................................................. 1Efficient Use ...................................................2Radio Frequency (RF) Exposure and SAR..........................................................2Driving ........................................................... 4Electronic Devices........................................... 4Aircraft............................................................ 5Blasting Areas..................................................6Explosive Atmospheres.................................... 6Power Supply.................................................. 6Children.......................................................... 7Disposing of the Product................................. 7Emergency Calls..............................................7Battery Information ........................................ 7FCC Statement ...............................................9Understanding this User’s Guide....................10Getting To Know Your Phone........................11Phone Views ................................................. 11Standby Screen Icons.................................... 12Key Functions............................................... 13Getting Started...............................................16Charging Your Battery.................................. 16Turning Your Phone On and Off ................. 19Making and Receiving Calls.......................... 19Using Menus ..................................................21Accessing Menus........................................... 21Phonebook Menu ......................................... 21Messages Menu............................................. 24Call Info Menu............................................. 25Ongoing Call Menu...................................... 28Settings Menu............................................... 28Extras Menu ................................................. 37Ditto Nicole.book Page i Tuesday, August 28, 2001 11:11 AM
iiBrowser Menu............................................... 39My Shortcuts Menu ......................................40Using the Phonebook..................................... 41Adding Contacts ........................................... 41Calling Contacts ...........................................42Editing the Phonebook .................................43Synchronizing Your Phone and PC............... 44Groups.......................................................... 45Touch Tone Service ......................................46Text Messaging.............................................. 47Before Sending Messages............................... 47Sending Messages.......................................... 47Templates ..................................................... 49Receiving Text Messages ............................... 50List of Options.............................................. 50Using Voice Commands................................. 52Before Voice Dialing.....................................52Voice Dialing................................................53Voice Answering ...........................................54Recording Voice Memos...............................54Magic Word ................................................. 55Editing Your Voice Commands .................... 56Inputting Text................................................58Multitap Text Input...................................... 58T9 Text Input............................................... 59WAP Browsing...............................................62Terminology................................................. 62Preparing Your Phone for WAP.................... 63Opening a WAP Page ................................... 64Bookmarks.................................................... 65Images .......................................................... 66Downloading Melodies Using Your WAP Browser ............................................... 66Download Timeout ...................................... 66Using WAP Profiles...................................... 66Security......................................................... 67Using the Calendar.........................................69Appointments and Tasks............................... 69Viewing Your Calendar................................. 70Editing.......................................................... 71Ditto Nicole.book Page ii Tuesday, August 28, 2001 11:11 AM
iiiCalendar Settings ..........................................71Synchronizing Your Phone and PC...............72Making Data and Fax Calls............................ 73Differences Between Data, Fax, and Internet Calls ................................................73Before You Start............................................74Setting Up Your Computer...........................75Initial Setup .................................................. 75Operation ..................................................... 76Achieving Best Performance..........................76Troubleshooting............................................77Troubleshooting............................................. 79Error Messages .............................................. 80Accessories, Accessibility and Internet ...........81Limited Warranty........................................... 82Our Warranty ............................................... 82What We Will Do ........................................ 82Conditions .................................................... 82International Service .....................................84Index.............................................................. 85Ditto Nicole.book Page iii Tuesday, August 28, 2001 11:11 AM
Ditto Nicole.book Page iv Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use1Guidelines for Safe and Efficient UsePlease read this information before using your mobile phone.Your mobile phone is a highly sophisticated electronic device. To get the most out of your mobile phone, please read this text about product care, and safe and efficient use.Product Care and MaintenanceDo not expose your product to liquid or moisture or to humidity.Do not expose your product to extreme high or low temperatures.Do not expose your product to lit candles, cigarettes, or cigars, or to open flames etc.Do not drop, throw or try to bend the product as rough treatment could damage it.Do not paint your product as the paint could obstruct the earpiece, microphone or any moveable parts and prevent normal use.Do not attempt to disassemble your product. The product does not contain consumer serviceable components. Only Ericsson service partners should perform service.Do not use any accessories other than Ericsson originals. Use of non-Ericsson original accessories may result in loss of performance, damage to the product, fire, electric shock or injury. The warranty does not cover product failures which have been caused by use of non-Ericsson original accessories.Treat your product with care, keep it in a clean and dust-free place.Antenna CareYour phone is equipped with either an internal or external antenna. To avoid impaired performance, please ensure that your mobile phone’s antenna is not damaged.Ditto Nicole.book Page 1 Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use2Do not remove the antenna yourself. If your mobile phone’s antenna is damaged, please take the product to an Ericsson service partner.Only use an antenna that has been specifically designed for your mobile phone. Use of unauthorized antennas, modifications, or attachments could damage the mobile phone and may violate the appropriate regulations, causing loss of performance and SAR levels above the recommended limits (see below).Efficient UseFor optimum performance with minimum power consumption please:•Hold the mobile phone as you would any other telephone. While speaking directly into the mouthpiece, angle the antenna in a direction up and over your shoulder.•Do not touch the antenna when the mobile phone is in use. Touching the antenna affects call quality, may cause the mobile phone to operate at a higher power level than needed and may shorten talk and standby times.•Do not use the product when the front and/or back cover is removed from the unit.•If your mobile phone is equipped with an infrared eye, never direct the infrared ray at anyone’s eye and make sure that it does not disturb any other infrared units.•If your mobile phone is equipped with a retractable antenna, Ericsson recommends that the antenna be kept fully retracted (closed) while the phone is in use and worn on the body to avoid the antenna touching, or coming in close proximity to, the body.Radio Frequency (RF) Exposure and SARYour mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields).Governments around the world have adopted comprehensive international safety guidelines, developed by scientific organizations*, e.g. ICNIRP (International Ditto Nicole.book Page 2 Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use3Commission on Non-Ionizing Radiation Protection), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population. All Ericsson mobile phone models are designed to operate within these stringent levels. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements.Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the phone while operating can be well below this value.This is because the phone is designed to use the minimum power required to reach the network. Therefore, the closer you are to a base station, the more likely it is that the actual SAR level will decrease.Variations in SAR below the radio frequency exposure guidelines do not mean that there are variations in safety. While there may be differences in SAR levels among mobile phone models, all mobile phone models must be designed to meet radio frequency exposure guidelines.More information on radio frequency exposure and SAR can be found on: www.ericsson.com/health.* Examples of radio-frequency exposure guidelines and standards that Ericsson mobile phone models are designed to conform to:•International Commission on Non-Ionizing Radiation Protection (ICNIRP), “Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz)”, Health Physics, vol. 74, pp 494-522, April 1998.•99/519/EC, “Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz)”, Official Journal of the European Communities, 1999.•IEEE C95.1-1991, “Safety levels with respect to human exposure to radio frequency electromagnetic fields, 3kHz to 300GHz”, The Institute of Electrical and Electronics Engineers Inc. (IEEE).•FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal Communications Commission (FCC), August 1996.Ditto Nicole.book Page 3 Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use4•Radiocommunications (Electromagnetic Radiation Human Exposure) Standard 1999, Australian Communications Authority (ACA), May 1999.DrivingPlease check if local laws and/or regulations, in the country/state where you are, restrict the use of mobile phones while driving.Law in many countries/states requires drivers to use a Hands Free solution. If so, it is recommended that you use Ericsson Hands Free solutions only with this Ericsson mobile phone model.Ericsson is concerned about your safety. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require.RF energy may affect some electronic systems in motor vehicles such as car stereo, safety equipment etc. In addition, some vehicle manufacturers do not allow use of mobile phones in their vehicles, unless a Hands Free kit with an external antenna supports the installation. Check with your vehicle manufacturer’s representative to be sure that your mobile phone will not affect the electronic systems in your vehicle.Vehicles Equipped with an Air BagAn air bag inflates with great force. Do not place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Electronic DevicesMost modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your mobile phone, therefore:PacemakersThe Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches (15 cm) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations Ditto Nicole.book Page 4 Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use5are consistent with the independent research by and recommendations of Wireless Technology Research.Persons with pacemakers:•Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;•Should not carry the phone in a breast pocket;•Should use the ear opposite the pacemaker to minimize the potential for interference.•If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider or call your local Ericsson Certified Call Center to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.•Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.•Turn your phone OFF in any facility where posted notices so require.Aircraft•Turn off your mobile phone before boarding any aircraft.•To prevent interference with communication systems, you must not use your mobile phone while the plane is in the air.•Do not use it on the ground without permission from the crew.Ditto Nicole.book Page 5 Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use6Blasting AreasTurn off your mobile phone when in a blasting area or in areas posted “turn off two-way radio” to avoid interfering with blasting operations. Construction crews often use remote control RF devices to set off explosives.Explosive AtmospheresTurn off your mobile phone when in any area with a potentially explosive atmosphere. It is rare, but your mobile phone or its accessories could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fuelling areas, such as petrol stations, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders.Do not transport or store flammable gas, liquid, or explosives in the same compartment of your vehicle that contains your mobile phone and accessories.Power SupplyConnect the AC power adapter only to designated power sources as marked on the product.To reduce risk of damage to the electric cord, remove it from the outlet by holding onto the AC adapter rather than the cord.Make sure the cord is positioned so that it will not be stepped on, tripped over or otherwise subjected to damage or stress.To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it.The AC power adapter must not be used outdoors or in damp areas.DANGER - Never alter the AC cord or plug. If the plug will not fit into the outlet, have a proper outlet installed by a qualified electrician. Improper connection can result in risk of electric chock.Ditto Nicole.book Page 6 Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use7ChildrenDO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR ITS ACCESSORIES. THEY COULD HURT THEMSELVES OR OTHERS, OR COULD ACCIDENTALLY DAMAGE THE MOBILE PHONE OR ACCESSORY. YOUR MOBILE PHONE OR ITS ACCESSORY MAY CONTAIN SMALL PARTS THAT COULD BE DETACHED AND CREATE A CHOKING HAZARD.Disposing of the ProductThe product should never be placed in municipal waste. Please check local regulations for disposal of electronic products.Emergency CallsIMPORTANT!This mobile phone, like any mobile phone, operates using radio signals, cellular and landline networks as well as user-programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any mobile phone for essential communications (e.g. medical emergencies).Remember, in order to make or receive calls, the mobile phone must be switched on and in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or mobile phone features are in use. Check with your local service provider.Battery InformationCharging the BatteryThe battery delivered with your phone is not fully charged. We recommend that you charge the battery for 4 hours before you use the phone for the first time. If you Ditto Nicole.book Page 7 Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use8are charging a new battery, or a battery that has run out completely, it may take a while (up to 30 minutes) before you get any indication (the battery meter appears in the display) that the battery is being charged.Please note that you cannot turn on the phone before the indicator lights up and the battery meter appears in the display.The battery can only be charged in temperatures between +5°C (+41°F) and +45°C (+113°F).Battery Use and CareA rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long time could have reduced capacity the first few times it is used.The talk and standby times depend on the actual transmission conditions when using the phone. If the phone is used near a base station, less power is required and talk and standby times are prolonged.Use only Ericsson original batteries and chargers. Using other batteries and chargers could be dangerous, and the warranty does not cover product failures which have been caused by use of non-Ericsson original batteries and chargers.•Do not expose the battery to extreme temperatures, never above +60°C (+140°F). For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced.•Turn off your phone before removing the battery.•Use the battery for the intended purpose only.•Do not attempt to take the battery apart.•Do not let the metal contacts on the battery touch another metal object. This could short-circuit and damage the battery.•Do not expose the battery to open flames. This could cause the battery to explode.•Do not expose the battery to liquid.•Do not allow the battery to be put into the mouth. Battery electrolytes may be toxic if swallowed.Disposing of the BatteryThe battery should never be placed in municipal waste. Please check local regulations for disposal of batteries or call your local Ericsson Certified Call Center for information.Ditto Nicole.book Page 8 Tuesday, August 28, 2001 11:11 AM
Guidelines for Safe and Efficient Use9FCC StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Ditto Nicole.book Page 9 Tuesday, August 28, 2001 11:11 AM
Understanding this User’s Guide10Understanding this User’s Guide•A Menu Diagram is located on the inside front cover of this User’s Guide. This is a quick overview of the menus in your Ericsson mobile phone.•Your Quick Reference Card gives you information about your Ericsson mobile phone that you can take with you.•Text that is seen in the phone’s display is shown in the following typeface: Add To Phonebook.•Softkey names are shown in the following typeface: Softkey.•Key names are shown in the following typeface: CLR.•When this guide instructs you to press a key, press and release the key.•When this guide instructs you to press and hold a key, press and hold the key for one to two seconds.Ditto Nicole.book Page 10 Tuesday, August 28, 2001 11:11 AM
Getting To Know Your Phone11Getting To Know Your PhonePhone ViewsThe following diagrams illustrate the front, back, and bottom views of your phone.1 Earpiece2 Side volume keys3 Display4 Left softkey5 Joystick(4-way navigation with center select key)6 Options key7 Keypad8 Power On/Off key9 Clear key10 Right softkey1235678910411 External antenna connector12 Headset jack13 Back cover latch14 Accessory Connector (Handsfree, Charger, FM radio, MP3, Chatboard, etc.) 15 Charging connector13111214 15Ditto Nicole.book Page 11 Tuesday, August 28, 2001 11:11 AM
Getting To Know Your Phone12Standby Screen IconsEvery time you power on your phone, you will see the standby screen. You will also see the standby screen when you exit the menu system. This lists all of the icons that could appear on your standby screen.1 Alarm icon ( ) is displayed if the alarm is set.2 Current Time is displayed.3 Signal strength ( ) shows the relative signal strength from the wireless system. More bars indicate a stronger signal (maximum of five bars).4 Analog/Digital channel indicator shows whether the phone is operating in analog ( ) or digital ( ) mode.5 Battery ( ) shows the relative strength of your battery. A full icon indicates a fully-charged battery.6 Network tag indicates that the phone is in standby mode and is ready for use.7 Ringer off/Phone silent indicates that your phone will not make ring sounds ( ) or that your phone will not make any sounds( ). Press the OPTIONS key ( ) to enter the Options menu to toggle these options on and off.8 Keylock ( ) indicates that pressing the keys has no effect. The keypad is locked to prevent inadvertent key presses. Press , CLR and the left softkey to toggle Keylock on and off.9 Active profile ( ) indicates the currently-selected profile.10 Call screening ( ) allows you to reject certain incoming calls.11 Magic Word ( ) indicator indicates that the Magic Word feature is enabled. See “Magic Word” on page 55.12 Call list ( ) icon shows the number of unanswered calls you have received. The icon appears when you have missed calls.13 Message icon ( ) indicates the total number of messages that you have received. When you view your messages, you can see the number of voicemail messages ( ), text messages ( ), email alerts ( ), and browser alerts ( ) that you have received.Ditto Nicole.book Page 12 Tuesday, August 28, 2001 11:11 AM
Getting To Know Your Phone13Options KeyThe OPTIONS key ( ) allows you to quickly access options for some functions (options vary based on the function you are using). For instance, when you are reading a new text message, you can press the OPTIONS key for choices such as delete, forward, or reply.Key FunctionsSoftkeysYour phone is equipped with softkeys. The softkey text labels are displayed on the bottom of your display. To u se th e sof tkey functions, press the left or right key that is under the text label on the screen.For example, press the left softkey to select Call List or press the right softkey to select the Menu from the standby screen.KeypadUse your phone’s keys for the following functions:left softkey labelleft softkeyright softkey labelright softkeyUse... To...Leftsoftkey• Make and answer calls.• Select a menu, submenu, or setting.• Access the Call List from standby.• Press twice to redial the last number called.Right softkey• End a call or quiet the ringer.• Go back one level in the menus.• Leave an option unchanged.• Press and hold to return to standby.Ditto Nicole.book Page 13 Tuesday, August 28, 2001 11:11 AM
Getting To Know Your Phone14Joystick/ Center Select• Move through menu, lists, or text. Tilt up, down, left, or right to scroll.• Tilt left or right to access the Main menu tabs from the standby screen.• Tilt up to access the bottom of your contact list.• Tilt down to access the top of your contact list.• Press down on the center ( ) to select an item, menu, or option (same as the left softkey in most cases).Clear key• Delete numbers/letters from the display.• Delete an item from a list.• Press and hold to mute the microphone during a call.• Press and hold from standby to set the phone to silent or to turn on keylock. Use... To...OPTIONS key• Enter a menu with options. The options vary depending on what function you are currently using.• Press to enter the Options menu from standby.Throughout this user’s guide, will be shown when you can use the OPTIONS key.Digit keys• Enter the digits 0–9 and letters.• Move through menus using shortcuts.• Press and hold for Super dial or Phonebook contact access, depending on how your phone is configured.• Press and hold for quick access to voicemail.Use... To...Ditto Nicole.book Page 14 Tuesday, August 28, 2001 11:11 AM
Getting To Know Your Phone15Asterisk key•Enter a *.• Press and hold to enter a pause ( ) character in phone number input.• Shift between uppercase and lowercase in text entry.Pound key•Enter a #.• Press and hold to enter a stop ( ) character in phone number input.Side volume keys• Increase or decrease the volume of the earpiece or handsfree loudspeaker during a call.• Scroll through menus, lists, and text.• Enter the Status menu from the standby screen which displays the date, the current profile, and other settings.• Press to quiet the ringer.• Press and hold to activate voice dialing and automatic speech recognition.Use... To...Power key• Press to power your phone on and off. You can power your phone off during a call or from any menu.Use... To...Ditto Nicole.book Page 15 Tuesday, August 28, 2001 11:11 AM
Getting Started16Getting StartedBefore using your phone, you must first attach and charge your battery.Charging Your BatteryTo charge your battery for the first time, you must attach your phone’s battery to the back of your phone under the back cover. Then, you must replace the back cover.Once you install your battery, you should not need to remove it.Attaching Your Battery1 Locate the connector at the end of the blue, red, and black wires.2 Insert the plug. The cable will only fit one way. Do not force it.3 The battery will lay flat.This side upDitto Nicole.book Page 16 Tuesday, August 28, 2001 11:11 AM
Getting Started17Replacing the Back CoverNote! Your phone is equipped with removable covers. For more information about ordering this and other accessories, see “Ordering Accessories” on page 81. Never use your phone with the front cover removed.Charging Your BatteryYour phone is packaged with a Lithium Ion (LiIon) battery. The battery is not charged when you buy your phone, but there may be enough power to switch the phone on.First Time Battery UseFully charge the battery before you use your phone for the first time. Your battery can be charged whenever you want without affecting its performance. You can also charge the battery when the phone is off.The battery meter icon ( ) on your standby screen indicates how much remaining strength your battery has.1 Locate the notches along each side of the back of the phone.2 Using the notches as a guide, slide the back cover upward until it clicks in place.* It may take up to 30 minutes for a new or fully discharged battery to indicate charging. It takes about 4 hours to fully charge a battery for the first time. For optimal performance, do not allow your battery to completely discharge.**Ditto Nicole.book Page 17 Tuesday, August 28, 2001 11:11 AM
Getting Started18Tip! The total remaining talk time depends on the type of battery you use and your position in the network. Note! The phone turns itself off when the battery can no longer power it satisfactorily.Note! The amount of battery power indicated by your battery icon is an estimate that may vary depending on your charging and use patterns. To ensure adequate power supply, keep your battery fully charged or carry additional charged batteries.Charging Indicators•Attention Battery Low (with a short beep)Phone needs charging.•Optimized Charging (meter pulses continuously)Your battery is fully charged when the meter stops pulsing.Charging1 Make sure that the battery is attached to the phone.2 Connect the charger to the electrical outlet.3 Connect the charger to the phone as shown in the picture. The flash symbol on the plug must face upwards.Note! The main electrical plug may look different depending on the electrical socket in your country. The plug may not be used for products other than Ericsson chargers.Note! The amount of battery power indicated by your battery icon is an estimate that may vary depending on your charging and use patterns. To ensure adequate power supply, keep your battery fully charged or carry additional charged batteries.Disconnecting the ChargerMove the plug connected to the phone upwards to remove it, as shown in the picture.Ditto Nicole.book Page 18 Tuesday, August 28, 2001 11:11 AM
Getting Started19Turning Your Phone On and OffTurn your phone On by pressing and holding the power key ( ) until your phone turns on. The phone will beep (unless silent mode is activated). Turn your phone Off by pressing and holding the power key until your phone turns off.Making and Receiving CallsMaking Calls1 Press the numeric keys to enter the phone number you want to call. The number is shown in the display.Note! You can press CLR to erase one or more digits in the display, or press and hold CLR to erase all digits.2 Press CALL. The number you are dialing is shown in the display while your phone accesses the wireless network.3 After the call is connected, the phone number that you dialed, or the corresponding contact name, will remain on your screen. The current time is replaced by the call timer.4 To end the call, press the right softkey. The duration of the call is displayed on your screen.Note! For optimal performance, hold your phone near the base to eliminate interference with the internal antenna signal.Making Emergency CallsEnter the local emergency number stored and press CALL.Note! Keylock and Phonelock do not prohibit emergency number access.Making International Calls1 Dial the international access code, the country code, the area code (without the leading zero) and the phone number.2 Press CALL.Note! Check with your service provider if you are having problems making international calls.Ditto Nicole.book Page 19 Tuesday, August 28, 2001 11:11 AM
Getting Started20Receiving CallsWhen your phone receives a call, the ringer sounds, Incoming Call appears in the display, and the display and keypad backlight illuminate. You can temporarily quiet the ringer by pressing the right softkey or the upper or lower side keys, and still answer the call by pressing the left softkey. If you have Caller Number Identification (Caller ID) service from your service provider, the caller’s phone number is shown in the display. The caller’s name will also appear if the phone number is found in your phonebook.Changing the Earpiece VolumeDuring a call, you can change the earpiece volume by pressing one of the side volume keys.•Push up to increase the volume.•Push down to decrease the volume.Muting the MicrophoneDuring a call, you can turn off the microphone.•Press and hold CLR until Microphone Muted appears in the display.•Press and hold CLR again to resume the conversation.Ditto Nicole.book Page 20 Tuesday, August 28, 2001 11:11 AM
Using Menus21Using MenusThe main menu has icons that display the top-level menus. The corresponding title of the selected option is displayed below the menu tabs when highlighted. Each menu is represented by an icon. A menu diagram is located on the inside front cover of this user’s guide.Accessing Menus•Press the center select key or the left softkey to choose the menu, function, or setting that is highlighted.•Tilt the joystick up, down, left, or right to navigate through the menus.•Press the right softkey to go back one level in the menu structure or to cancel the current action.•Press the left softkey to select the menu, function, or setting that is highlighted.To help you use the menus and functions, your phone has pop-up help texts that explain the menus.These help texts are set to On when you buy your phone, but you can turn them off at any time.1 Scroll to Settings, Select, Display, Select, Menu Help, Select.2 Select On or Off by tilting your joystick up or down. Press Select.Phonebook MenuFor more information on using the phonebook, see “Using the Phonebook” on page 41.Ditto Nicole.book Page 21 Tuesday, August 28, 2001 11:11 AM
Using Menus22Call ContactPhonebook entries will appear in alphabetical order by either first or last name, depending on the sort order you chose. Select an entry or type in the position number and press the left softkey to call the highlighted number.Add ContactYou can store several phone numbers and an email address for a phonebook entry. Once you have entered all of your contact information, press the left softkey to add the entry to your phonebook.Note! The ability to store an email address for a contact is dependent on your service provider.Edit ContactYou can locate and update your phonebook entries whenever you want. These entries are also listed in their sort order.My NumbersYou can display and switch between the wireless phone numbers that correspond to the subscriptions that are programmed into your phone.Note! If your service provider allows multiple phone numbers, this feature allows you to switch between phone numbers.GroupsYou can organize the members of your phonebook into categories. This feature can be used for call screening if your network supports Caller ID. You can also send SMS messages to all group members at one time.Calling CardsYou can store calling card numbers to use for making local and long distance calls. The options are Card Setup and Set Calling Cards.Note! You will be prompted to enter your PIN to enter the Calling Cards submenu. The default PIN is 0000.Card SetupTo set up your calling cards, make sure you have the Calling Card Access Numbers (numbers provided by your long distance service provider) and the Verification Numbers (numbers you must enter to allow the calling card call to be completed).Ditto Nicole.book Page 22 Tuesday, August 28, 2001 11:11 AM
Using Menus23When you enter the Card Setup submenu, you are prompted for the following information: Your PIN; the Name of your calling card; the Access number; the Dialing delay; Code first or Number first; Verification number; and Dialing delay again.Set Calling CardsYou can select which calling card to use for a particular call. You can select a specific calling card by pressing your joystick up or down until the calling card you want to use is highlighted. Press the left softkey to choose the highlighted selection.Note! Only cards that have been set up will appear as options for Default card.Making a Calling Card Call1 Enter or recall the phone number you want to call.2 Press the left softkey. The calling card access number is shown in the display.3 Release the key after the number has been displayed.If you are using stops between numbers, you must press the left softkey to send the next sequence of numbers. If you use pauses, the numbers are sent automatically after the specified length of time chosen for the dialing delay. For more information on Stops and Pauses, see “Stop and Pause Dialing” on page 41.OptionsYou can edit phonebook positions, change phonebook entry sort order, set long press functionality, ask to save confirmation, or delete all phonebook entries.Edit PositionsYou can change position numbers associated with all of the entries you have in your phonebook for easier access to speed dial positions.Note! If you synchronize your computer’s contact list with your phone’s contact list, the position numbers in your phone’s contact list will be overwritten.Sort OrderYou can choose whether you want your phonebook entries searched by first name or last name.Long PressYou can specify the outcome of a “press and hold” on a digit key. The options are SuperSpd Dial, Phb. Shortcut, and Off.Ditto Nicole.book Page 23 Tuesday, August 28, 2001 11:11 AM
Using Menus24Enabling SuperSpd Dial allows you to press and hold keys 2 through 9 to dial the number corresponding to the phonebook position. Enabling Phb. Shortcut allows you to press and hold keys 2-9 and your list of phonebook entries corresponding to the closest letter mapped to the key pressed will be displayed.Note! The 1key is reserved for your voicemail access number.Ask to SaveYou have the option of storing a dialed phone number as a phonebook entry upon call completion. If the phone number is already saved in your phonebook, you will not be prompted to save it to your phonebook again.Delete AllYou can delete all of the phonebook entries that are stored in your phone. When you select Delete All, you will be prompted to confirm that you want to delete all of the positions in your phonebook. If you press the left softkey, you will be prompted for your PIN number. You must correctly enter your PIN number to delete all of your phonebook entries.Memory StatusYou can see how much of your phone’s memory is vacant and how much is being used. The number of entries used is listed first, and the total number of positions available is listed in parentheses.Messages MenuThe Messages menu contains choices for specifying and accessing message services that may be available from your service provider (for example, text messages and voicemail). For details on sending and receiving messages, see “Text Messaging” on page 47.VoicemailThe Voicemail submenu allows you to enter and access your voicemail access number if you have voicemail service from your service provider.You can store your voicemail access number(s) so that a number automatically displays when you receive a voicemail notice.Once you have stored your voicemail access number, you can retrieve voicemail messages by pressing and Ditto Nicole.book Page 24 Tuesday, August 28, 2001 11:11 AM
Using Menus25holding . Contact your service provider if you do not know your voicemail access number.1 Scroll to Messages, Select, Options, Select, Voicemail No., Select.2 Enter your voicemail phone number and press OK.EmailThe Email submenu allows you to use your phone to access an email account from another device (such as your PC). Submenus include Send & Receive, Inbox, Compose, Outbox, Drafts, Archive, and Email.SMSThe SMS submenu contains the following submenus: Received Mail, Send New, Unsent Mail, Templates, and Sent Mail. For more information on sending and receiving text messages, see “Text Messaging” on page 47.BrowserThe Browser submenu is used to let you know when you have received a new alert in your inbox (such as stock quotes).Empty MailboxesYou can delete all of the messages in your mailbox, or just your Sent Mail, Unsent Mail or Inbox.Options Message options will appear when you are in the Messages menu. To see the Message options, press the OPTIONS key. For more information on using the options, see “Message Options” on page 47.Options may include: Message Alert, Voicemail No., Message Type, Message Read Ack., Msg. Priority, Callback Number, and Subject.Memory StatusYou can see valuable information about what percentage of the phone’s memory is available for SMS messages. The information is displayed as % Locked, %MemoryFree.Call Info MenuThe Call info menu allows you to view information and establish dialing and answering preferences for your phone (some selections available in this menu are Ditto Nicole.book Page 25 Tuesday, August 28, 2001 11:11 AM
Using Menus26dependent on your service provider). It also enables you to view and edit system options and call statistics.Missed CallsYou can see the list of calls you have missed (if you have Caller ID service from your service provider) along with the time that the calls were received. When a missed call is one day old, the time that the call was received is replaced with the date that the call was received. The latest call appears first. Tilt your joystick up or down to scroll through the list. The Missed Calls icon indicates a missed or unanswered call.If the received number is stored in the phonebook with a name, the name is also shown in the display. To dial the phone number shown in the display, press the left softkey twice. To edit the phone number, press the left softkey once, then tilt the joystick to the left or right to move the cursor left or right to the digit(s) that you would like to change. Dial the new phone number by pressing the left softkey.Call ListPress the left softkey to view the last 50 received, missed, and sent calls.From this list you may view details, call, add the number to your phonebook, or delete the number•Call: Press the left softkey. Press the left softkey again to call the number.•Press the key for the following options:•Edit Before Call allows you to change the number before dialing.•CC Call allows you to dial the number using a calling card.•Add Number allows you to add the number to your Phonebook.•Delete allows you to erase the number from your Call List.One of the following icons will appear next to each number in the Call List.• Indicates a missed call in your Call List.• Indicates an incoming call in your Call List.• Indicates an outgoing call in your Call List.Usage TrackerYou can use these options to easily track your phone use.Ditto Nicole.book Page 26 Tuesday, August 28, 2001 11:11 AM
Using Menus27Last callYou can view information about the duration of your last phone call in hours, minutes, and seconds.Total callsYou can see the total number of calls and the total hours, minutes, and seconds that you have used since you last reset your phone.Note! The actual time your service provider invoices may vary, depending on items including network features and rounding off for billing.Outgoing timeYou can see the total length of all of your outgoing calls since you last reset your phone.Incoming timeYou can see the total length of all of your incoming calls since you last reset your phone.SMS counterYou can see the total number of SMS messages you have sent and/or received.ClearYou can reset your call time and/or your call counter. The options are Call Timers and SMS Counter. Call timers resets the total time and total number of calls, both outgoing and incoming. SMS counter resets the total number of incoming and outgoing SMS messages.Minute minderYou can choose if you want to hear a sound every minute during phone calls. The options are On and Off.Call info optionsClear Call ListYou can delete the list of your 50 most recent calls.Call List ActiveYou can turn your Call List on so you can view the list of your 50 most recent calls.Ditto Nicole.book Page 27 Tuesday, August 28, 2001 11:11 AM
Using Menus28Ongoing Call MenuThe Ongoing Call menu appears only when you are engaged in a call.Hold CallYou can place a call on hold to set up another call or to answer a waiting call. Select Hold Call by tilting the joystick up or down until Hold Call is highlighted and then select it by pressing the left softkey.Switch CallsYou can change from one active call to another. Select Switch Calls by tilting the joystick up or down until Switch Calls is highlighted and then select it by pressing the left softkey.Retrieve callYou can recover a held call and make it active. Select Retrieve Call by tilting the joystick up or down until Retrieve Call is highlighted and then select it by pressing the left softkey.Release activeYou can end the active call by selecting Release Active. Select Release Active by tilting the joystick up or down until Release Active is highlighted and then select it by pressing the left softkey.Call infoYou can return to the Call Info menu by tilting the joystick up or down until it is highlighted and then select it by pressing the left softkey.Settings MenuSounds & AlertsYou can change the sounds and alerts on your phone.Ring VolumeYou can set the level of the ring volume. The volumes range from Off to High. You can change the Ring Volume by moving your joystick to the right (to increase the volume) or to the left (to decrease the volume). Press the left softkey or press the joystick to confirm your selection.Ditto Nicole.book Page 28 Tuesday, August 28, 2001 11:11 AM
Using Menus29Note! If you set the Ring Volume to level one, you will hear only a series of beeps when you receive an incoming call regardless of the Ring Signal you have set.Phone SilentYou can specify that you do not want your phone to make keypad or alert sounds. The icon on your screen indicates that your phone is in Silent.Increasing ringWhen you select Increasing Ring, the ring volume will continue to increase until you answer or reject the call.Vibrating alertYour phone has a built-in vibrating alert function so you can receive calls or messages silently. The options are On, On if Silent and Off.Ring SoundsYou can choose the type of sound or melody for the ringer. Each sound or melody is demonstrated as you scroll through the selections. There are multiple ring sounds, some of which you can create yourself.Alarm SoundYou can select different types of melodies or signals to hear when your alarm sounds.Message AlertChoose which type of sound you will hear when you receive an incoming SMS, voicemail, or browser message. The options are Tone, Click, or Silent.My MelodiesYou can create or edit a ring melody using each key on your keypad as a note (1=C, 2=D, 3=E, 4=F, 5=G, 6=A, 7=B, 8=+C, 9=+D, 0=+, *=pause, #=#). Short presses of the digit keys will display lowercase characters. Long presses of the digit keys will display uppercase characters. Press # to make the previous note sharp or flat. Once you personalize a melody, you can select it as a Ring Sound.Note! The + sign indicates an octave higher.To clear your melody, tilt the joystick left or right to select the location you want to clear. Press the left softkey to delete the location. Press and hold CLR to delete multiple notes.Note! Volume is the same as your current Ring Volume.Ditto Nicole.book Page 29 Tuesday, August 28, 2001 11:11 AM
Using Menus30Your phone comes with four melodies. You can edit your melodies and you can also send them to a friend in a text message. The My Melodies submenu includes Edit and Send options. In addition, you can download custom melodies using your phone’s browser. See “Downloading Melodies Using Your WAP Browser” on page 66.Editing Ring Signals•Press a key to enter a note.•Press 8 or 9 to make the note shorter or longer.•There are six different lengths of notes.•Press 0 to change the octave.•Press # once to raise the note one semitone.•Press # twice to lower the note one semitone.•Press to add a melody symbol, and to set the tempo, volume, style, and duration.•Press CLR to remove notes.•To listen to your melody, press the left softkey.•Press the left softkey again to save and name it, or press the right softkey to continue composing.Sending Ring SignalsYou can send a ring signal to a friend via an SMS message. Choose Send from My Melodies. Enter the recipient’s phone number and press the left softkey.Key SoundChoose which type of sound you will hear when you press a key. The options are Tone, Click, or Off.Access ToneYou can choose which, if any, sound you will hear when your phone makes a voice connection.Minute MinderYou can choose to be notified when each minute passes while you are engaged in a call. Settings are On and Off.Voice PrivacyYou can block others from eavesdropping on your telephone calls. The options are On With Tone, On But No Tone, and Off.Note! This feature is dependent on your service provider.Ditto Nicole.book Page 30 Tuesday, August 28, 2001 11:11 AM
Using Menus31ProfilesA profile is a group of settings which are set to suit a certain environment. For example, when you go to a meeting, you can simply choose the Meeting profile and a number of settings that suit a meeting are set. For instance, the ring volume is turned off.Select ProfileYou can choose a different profile from the currently selected Profile. Your profile options include Normal, Meeting, Car, Outdoors, Portable H-free, Home, and Work.Edit ProfileYou can customize your profiles by specifying settings for specific items. For example, in Meeting profile, you might want to set your Vibrating Alert to On and your Ring Volume to Off. When you go into a meeting, you can select Meeting profile. If you receive a call during your meeting, your phone’s Vibrating alert feature will notify you of an incoming call, but your ringer will not sound and disturb other meeting participants.Note! The Normal profile cannot be renamed.View ProfileYou can view the attributes of the currently selected profile.Reset ProfilesYou can reset all profile settings to the way they were set when you bought your phone.Call OptionsAccept CallsYou can specify the phone numbers that you would like to accept calls from. Your choices include From All, From List, and From No One. The From List option allows you to customize your list of callers that will cause your phone to ring.Forward CallsYou can forward the incoming calls that you are unable to answer. The options are Activate, Deactivate, and Setup.Note! This feature is dependent on your service provider.Note! You will need separate codes from your service provider to turn the feature on and off.Ditto Nicole.book Page 31 Tuesday, August 28, 2001 11:11 AM
Using Menus32Once you have entered these codes, select Activate, then enter the number to which you want your calls forwarded. Your phone will send the appropriate information to your service provider to set up this feature.Restrict CallsYou can block specific calls from being dialed or answered. The options are All Incoming or All Outgoing.Note! If you forward incoming calls, you cannot activate some Restrict Calls options. Likewise, if you restrict calls, you cannot activate some Forward Calls options.Call WaitingYou can answer an incoming call while you are engaged in a call. The options are Activate, Cancel, and Setup. Setup allows you to customize your service.Note! This feature is dependent on your service provider.Note! Turn off Call Waiting when placing data calls.Note! When you select Setup, you will need to enter the code for activating/deactivating this feature. This code is given to you by your service provider.Once you enter your code, select Activate to turn Call Waiting on and Deactivate to turn Call Waiting off.Note! During a call, you can also use the Switch Calls option to change between the two calls.Auto Area CodeYou can store an area code that will be automatically added to the 7-digit phone number that you are dialing. The options are On and Off. The area code is automatically added to the phone number you are calling when Auto Area Code is set to On. When you select On, you will be prompted for the area code you want to use.Auto PrefixYou can store a 1- to 12-digit prefix, which is automatically added to the dialed phone number. When you dial a 4- or 5-digit phone number, the prefix is automatically added to the phone number. The options are On and Off.In order to send a number to office extensions, store the 3-digit prefix in the Auto Prefix submenu. You only need to dial the last four or five digits of the phone number.For example, if you save 123 as the auto prefix and the function is On, you can call 123-7654 by simply dialing 7654. The prefix 123 is automatically added to Ditto Nicole.book Page 32 Tuesday, August 28, 2001 11:11 AM
Using Menus33the phone number after you press the left softkey to dial the phone number. The auto prefix is not added for phone numbers longer than five digits.Answering ModeYou can specify how you want to answer your calls. The options are Normal, Any Key, and Auto. Selecting Normal indicates that pressing the left softkey will answer a call. Selecting Any Key indicates that a call can be answered by pressing any key except the right softkey. Selecting Auto indicates that a call will be answered automatically if connected to an accessory, for example, a vehicle handsfree kit.Auto RetryYou can automatically redial a number without dialing, hanging up, and dialing again by setting Auto Retry to On. Auto Retry is used when the system is busy regardless of whether the receiver’s phone is busy.Voice PrivacyYou can block others from eavesdropping on your telephone calls. The options are On With Tone, On But No Tone, and Off.Note! This feature is dependent on your service provider.DisplayYou can change the Light, Display SleepText Size, User Greeting, and activate/deactivate Menu Help.LightYou can set the display and keypad backlighting to stay On or Off or to automatically turn On for 30 seconds when a call is received or a key is pressed.Display SleepUse Display Sleep to save battery power. The text in standby mode is reduced to one row at the top of the display a few minutes after you have pressed the last key.Text SizeYou can change the display text size to Small, Medium, or Large. Changing the text size alters the number of lines of text that appear on your display and increases the font size.User GreetingYou can change the screen that you see when you power on your phone. The options are a list of Ericsson Movies, My Greeting, My Animation, and Off. You can download Ditto Nicole.book Page 33 Tuesday, August 28, 2001 11:11 AM
Using Menus34additional software to change your power-up/power-down animation from http://mobileinternet.ericsson.com.Background MenuYou can choose pictures, animation, or greetings for your background.Menu HelpYou can choose to have a brief description of each top-level menu item to be displayed after 10 seconds of inactivity. These help texts are set to On when you buy your phone, but you can turn them off at any time.LanguageYou can select the display language used in the phone display. The languages vary between markets.Menu LanguageYou can select in which language you would like the phone’s menu to appear. The options are Automatic, English, Spanish, Portuguese, French, and Hebrew.Input LanguageYou can select which language you would like to be able to input text in. The options for Input vary according to the T9™ Text Input setting.Note! All languages are not available in every area.T9 PredictiveYou can determine whether predictive text is displayed during text input. The options are On and Off.Time and DateSet TimeYou can enter the correct time in the format using the keys on your keypad.Note! If you select the 12-hour clock, you can alternate between am and pm by pressing #.Time SettingsYou can set additional time-related settings. The options are Time Format (24 hour or am/pm), Time Zone (±GMT), DaylightSavings (On or Off), and Auto Time Zone (On of Off).Ditto Nicole.book Page 34 Tuesday, August 28, 2001 11:11 AM
Using Menus35Note! To synchronize your phone with your computer, be sure to set both to the same time zone.Set DateYou can enter the correct date using the keys on your keypad. You will be prompted for month, day, and year information. You can tilt the joystick up or down to advance through the month, day, and year selection. Press the left softkey to confirm the current date.Date FormatYou can switch between date formats by tilting the joystick up or down until the format you want is selected. Press the left softkey to confirm your selection.LocksPhonelockYou can prohibit your phone from making calls, except emergency calls, each time you turn the phone on. To set your Phonelock, you will be prompted to enter your security code. The options are On and Off.KeylockYou can prohibit your phone from keypad presses. Keylock activates after 30 seconds of inactivity. The two options for Keylock are On and Off. The keypad remains locked until you do one of the following:•Remove and replace the battery.•Answer a call (after the call is completed, the keypad is returned to the locked state).Note! The Keylock and Phonelock features allow emergency number access even if the Keylock or Phonelock are active. To unlock your keypad, press the OPTIONS key, then press CLR followed by the left softkey.Voice ControlVoice SettingsYou can turn voice control features on or off and train the commands for using these features. The options are Voice Dialing, Voice Answer, Caller Name, Voice Memo, and Magic Word. For more information, see “Using Voice Commands” on page 52.Ditto Nicole.book Page 35 Tuesday, August 28, 2001 11:11 AM
Using Menus36Voice CommandsYou can choose to view your list of voice commands.Commands include Magic Word, Voice Dialing, Voice Answer, Contacts, and Voice MemoErase All VoiceYou can delete all of your voice recordings. You will be prompted before the recordings are permanently deleted.NetworksYou can prioritize and manually select the systems from which you can obtain service. This can include your public home system as well as private and residential systems. This function is particularly useful if you have access to more than one mobile system. Only systems that are currently available can be selected. This varies depending on your geographic location. You will be prompted to enter your PIN to make any modifications. This is typically not necessary so you should contact your service provider before making any network changes.Note! These features are dependent on your service provider.Select NetworkYou can manually initiate a search for a new network.New PrivateYou can search for private systems that are not programmed into your phone. Once the search is complete, you will be provided with a list of available systems.PriorityYou can change the order of the system types for which your phone searches. Your default Priority is (1) Public, (2) Private, and (3) Residential. This means that your phone will look for service on a Public system first, followed by a Private system, followed by a Residential system.Roaming SearchYour phone can look for an available system for you to use when you are away from your home area.Note! These features are dependent on your service provider.Reset SettingsYou can reset all of your phone settings to the factory defaults.Ditto Nicole.book Page 36 Tuesday, August 28, 2001 11:11 AM
Using Menus37Data Comm.In order to browse or use the email program in your phone, you must enter settings for a data account in your phone. Extras MenuVoice MemoYou can record and store memos in your phone. For more information on Voice Memo, see “Using Voice Commands” on page 52.RecordYou can enter a new voice memo.Memo ListYou can see your list of voice memos sorted by date, time, or length.Erase All Voice MemosYou can permanently delete your voice memos.Set ViewYou can see attributes of your memos. The options are Date Recorded, Time Recorded, and Length.CalendarYour calendar can store up to 300 events and 80 tasks on your phone. For more information, see “Using the Calendar” on page 69.TimeAlarm ClockThe phone has an alarm clock which rings at the time set, even if the phone is turned off. The alarm rings for 60 seconds and is repeated every nine minutes for 60 minutes if you do not turn it off.To turn the alarm off, press the left softkey. If you do not want the alarm to be repeated, press the left softkey again.Time and DateYou can edit your time and date information.Ditto Nicole.book Page 37 Tuesday, August 28, 2001 11:11 AM
Using Menus38Set TimeYou can enter the correct time in the format you chose using the keys on your keypad.Note! If you select the 12-hour clock, you can alternate between am and pm by pressing #.Time SettingsYou can set additional time-related settings. The options are Time Format (24 hour or am/pm), Time Zone (±GMT), DaylightSavings (On or Off), and Auto Time Zone (On of Off).Note! To synchronize your phone with your computer, be sure to set both to the same time zone.Set DateYou can enter the correct date using the keys on your keypad. You will be prompted for month, day, and year information. You can tilt the joystick up or down to advance through the month, day, and year selection. Press the left softkey to confirm the current date.Date FormatYou can switch between date formats by tilting the joystick up or down until the format you want is selected. Press the left softkey to confirm your selection.TimerThe phone has a built-in 24-hour countdown timer. You set the time you want and when that time is up, the phone beeps.StopwatchYour phone has a built-in stopwatch. The left softkey starts and subsequently pauses the Stopwatch. The right softkey resets the Stopwatch.GamesYour phone has several games.You can control the games using your joystick and the keys on your keypad. Use the joystick to move up, down, left, or right and to select an item, or use the keypad as follows:2=up4=leftCLR=pauseCancel=save/quit#=undo8=down6=right5=select/deselectSelect=confirm*=resetDitto Nicole.book Page 38 Tuesday, August 28, 2001 11:11 AM
Using Menus39CalculatorThe phone has a built-in calculator, which can add, subtract, multiply, and divide.•Press the digit keys to enter the numbers you want to calculate.•Tilt the joystick right or left to highlight an operation (+, -, x, /, add decimal).•Press the left softkey to perform the operation.•Press the right softkey to cancel the operation.Code MemoYou can store personal information, like your computer password, in your phone. You will only have to remember one password to access all personal codes and passwords. You will be prompted to enter a 4-digit password, followed by a 4- to 15-character check word. If an incorrect password and/or check word is entered, an error message is displayed.PicturesYour phone comes with a number of pictures and animations. These animations are stored in Pictures. You can use these pictures and animations in the background and during power-up/power-down show.AccessoriesThe Accessories submenu allows you to work with the accessories that are currently connected to your phone.Browser MenuFor more information about the WAP services menu, see “WAP Browsing” on page 62.Mobile InternetYou can launch your phone’s browser and go directly to the Mobile Internet.BookmarksYou can view the list of Bookmarks you have set.Push InboxYou can view the list of WAP Push messages you have received.Enter AddressUse this submenu to enter a URL for your browser to locate.Ditto Nicole.book Page 39 Tuesday, August 28, 2001 11:11 AM
Using Menus40ResumeUse this submenu to restart browsing.Select ProfileUse this submenu to change your profile while browsing. You can establish 3 different profiles.Clear CacheUse this submenu to delete the list of previously visited web sites and conserve browser memory.WAP SettingsYou can choose the WAP gateway that you want to use for browsing.My Shortcuts MenuEdit shortcutsYou can place your favorite functions in the My Shortcuts so that you quickly and easily reach the functions you use most. When you buy your phone, My Shortcuts contains a few functions which you can remove if you wish.1 Scroll to My Shortcuts, Select, Edit Shortcuts, Select.2 Select a function from the list by pressing *, #, the left softkey, or by pressing the center push key.3 Enter the position number you want for your function in this menu and press OK. To add another function, repeat steps 2 and 3. To remove a function, repeat steps 2 and 3. Pressing *, #, the left sokftkey, or by pressing the center select key also deselects a function.34 Press the left softkey to cancel your settings.5 Press the right softkey to exit. You will be prompted to save your settings. Press the left softkey to save your settings or the right softkey to cancel your settings.Ditto Nicole.book Page 40 Tuesday, August 28, 2001 11:11 AM
Using the Phonebook41Using the PhonebookYou can create your personal phonebook by saving information about your friends and colleagues as a contact. In a contact, you can save details such as name, title, phone numbers, and e-mail address – all in one place.Adding ContactsFor each contact, you can fill in the following information: first name, last name, company, title, home phone number, work phone number, mobile phone number, fax number, other phone number, and e-mail address. The contacts are saved in the phone.Adding New Contacts1 Scroll to Phonebook, Select, Add Contact, Select.2 Press the left softkey and enter a first name. Press the left softkey twice and enter a last name, and so on.3 When you have filled in the information you want, press the right softkey to exit. You will be prompted to save the entry in your phonebook.If voice dialing is on, you are asked if you want to save a voice tag for the contact.Note! The ability to store an email address for a contact is dependent on your service provider.Note! Each phone number saved occupies one position in the memory. You can save over 500 phone numbers in the phone.Stop and Pause DialingStop and pause dialing lets you enter groups of numbers with stops and pauses between each group of numbers. This feature is useful when you need to dial a phone number and then another number, such as an access number for an answering machine or voicemail system.A stop causes the phone to stop transmitting numbers until you press the left softkey. You can enter a stop in a series of digits by pressing and holding # for the Options Ditto Nicole.book Page 41 Tuesday, August 28, 2001 11:11 AM
Using the Phonebook42menu, and then selecting Insert Stop. A is shown in the phone number whenever there is a stop.A pause temporarily suspends transmitting numbers for approximately two seconds before sending the next series. You can enter a pause in a series of digits by pressing and holding * until is shown in the display. For example, if your office has a voicemail system that requires you to dial a phone number, followed by your extension, followed by an access code, you could enter the following: 555-1111 2222 33333.When you press the left softkey, your phone dials the number and then stops transmitting tones. When your voicemail system asks for your extension you would press the left softkey to transmit your extension. The access code is sent after the pause. If the timing in your voicemail system does not allow for pauses, you can enter a stop instead of the pause, or use multiple pauses.You can also store groups of numbers which can include stops and pauses in a location. You can then dial the numbers by entering the location and pressing CALL.Calling ContactsYou can find and call a phone number saved in a contact by searching for either the first or last name, depending on which sort order you have set.Selecting a Sort Order1 Scroll to Phonebook, Select, Options, Select, Sort Order, Select.2 Select a sort order and press OK.Calling Contacts1 Scroll to Phonebook, Select, Call Contact, Select.2 You will see your contact list. Scroll through the list using your joystick and press the left softkey when the number you want to call is highlighted.3 Press the left softkey to make the call.Shortcuts to ContactsWhen in standby, you can find a contact by pressing and holding one of the keys 2-9 to find a contact beginning with a specific letter.Ditto Nicole.book Page 42 Tuesday, August 28, 2001 11:11 AM
Using the Phonebook43For example, pressing and holding 2 takes you to the first contact beginning with the letter A (or closest following).When in standby, you can also access your contact list by tilting your joystick up or down. Tilting your joystick up accesses the bottom of your contact list. Tilting your joystick down accesses the top of your contact list.Note! You must activate Phb. Shortcut under the Long Press submenu before using this shortcut.Speed DialingSpeed dialing allows you to press the digits (2-99) that correspond to your phonebook position numbers. Then, press the left softkey to dial the number in that position.Super Speed DialingEnabling SuperSpd Dial allows you to press and hold keys 2 through 9 to dial the number corresponding to the phonebook position.Note! The 1 key is reserved for quick access to voicemail.Note! You must activate SuperSpd Dial under the Long Press submenu before using this shortcut.Editing the PhonebookYou can edit a contact in the phonebook with the Edit Contact function.1 Scroll to Phonebook, Select, Edit Contact, Select.2 You will see your contact list. Scroll through the list using your joystick and press the left softkey when the number you want to edit is highlighted. If the contact shown is not the one you want, tilt the joystick up or down until you find the correct contact.3 Press the left softkey. Select Edit Name or Edit Numbers and press the left softkey. You can edit the voice command for the contact name by selecting Edit Voice Label. You can edit the position for a phone number by selecting Edit Positions.4 Tilt the joystick up or down to go to the details that you want to edit.5 When you have made your changes, press the left softkey. Scroll to Save and Exit at the bottom of the list and press the left softkey.Ditto Nicole.book Page 43 Tuesday, August 28, 2001 11:11 AM
Using the Phonebook44Setting Default Numbers1 Scroll to Phonebook, Select, Edit Contact, Select.2 You will see your contact list. Scroll through the list using your joystick and press the left softkey when the contact you want to call is highlighted.3 Press Select to select a contact.4 Select Default Number and press Select.5 Select the number you want as the default phone number. Press Select.Deleting Contacts1 Scroll to Phonebook, Select, Edit Contact, Select.2 You will see your contact list. Scroll through the list using your joystick and press the left softkey when the contact is highlighted.3 Press CLR to delete the contact.4 Press Ye s to confirm.To delete all contacts select Phonebook, Select, Options, Select, Delete All, Select.Tip! Your contacts can be synchronized with a program running on a PC or a PDA.You can organize your phonebook so that the phone numbers you use most frequently are easily available. You can, for example, have certain numbers saved in positions 1-9 to be able to speed dial them.Changing Position Numbers1 Scroll to Phonebook, Select, Options, Select, Edit Positions, Select.2 Scroll to the phone number you want to move, press OK.3 Scroll to the position to which you want to move the phone number and press the left softkey. The phone numbers switch positions.4 When you have finished, press the right softkey.Synchronizing Your Phone and PCTo enhance use of your Phonebook features, you may want to purchase XTNDConnect PC or download a free abbreviated version of XTNDConnect PC (does not include email capabilities). XTNDConnect PC is a software application that allows you to synchronize your Ditto Nicole.book Page 44 Tuesday, August 28, 2001 11:11 AM
Using the Phonebook45contacts, calendar, tasks, and email between your mobile phone and popular PC applications on your computer. To u se yo ur Ericsson mobile phone with the XTNDConnect PC program, you will need the following:•A functional serial port on your computer•Microsoft Windows 95/98 Se/Me/NT4/2000•An Ericsson serial interface cable (RS232 Cable DRS-11)•Ericsson Mobile Phone Monitor (a software interface between your mobile phone and the XTNDConnect PC software)•Purchase XTNDConnect PC (http://www.extendsystems.com/go/ericsson) or download a free version of XTNDConnect PC for Ericsson phones only (http://mobileinternet.ericsson.com).GroupsYou can create groups of contacts. In this way you can send a text message to several recipients at the same time. Creating New Groups1 Scroll to Phonebook, Select, Groups, Select.2 Select Add Group and press OK.3 Enter a name for the group and press OK.4 Scroll to Add Member, OK.5 Enter the first letter of the contact you want to add. Press OK.If the contact shown is not the one you want, tilt the joystick up or down until you find the correct contact. Press OK.6 Select a number and press OK.7 To add the next member, scroll back to Add Member and press OK.Adding New Members to Existing Groups1 Scroll to Phonebook, Select, Groups, Select.2 Select the group that you want to edit and press OK.3 Scroll to Edit, Select, Add Member, OK. Continue the same way as when you add a new member to a new group.Ditto Nicole.book Page 45 Tuesday, August 28, 2001 11:11 AM
Using the Phonebook46Editing Group Names1 Scroll to Phonebook, Select, Groups, Select.2 Select the group name that you want to edit and press OK.3 Select Edit Group Name and press Select.4 Enter the new name of the group and press Select.Deleting Group Members1 Scroll to Phonebook, Select, Groups, Select.2 Select the group that you want to edit and press OK.3 Select Edit and press Select.4 Scroll to the member that you want to delete and press the CLR.5 Press Ye s to confirm your choice.Deleting Groups1 Scroll to Phonebook, Select, Groups, Select.2 Select the group that you want to delete and press OK.3 Select Delete Group and press Select.4 Press Ye s to confirm your choice.Touch Tone ServiceYou can save a phone number together with tone signals and codes in your phonebook. When you call this entry, the phone number and all the tone signal codes are then dialed automatically. This could be useful, for example, when accessing an answering machine or when using telephone banking services.Note! Saving personal codes in the phonebook involves a risk if your phone is stolen. It is safer to save personal codes in the Code Memo. See “Code Memo” on page 39.1 Scroll to Phonebook, Select, Add Contact, Select.2 Press Edit and enter the name that you want to associate with the phone number and code. Press OK.3 Scroll to Other and press Edit.4 Enter the phone number. Press and hold until the pause character ( ) appears in the display. Enter the code, if needed, enter another pause, another code and so on. Press OK.5 Scroll to Save and Exit and press Edit.Ditto Nicole.book Page 46 Tuesday, August 28, 2001 11:11 AM
Text Messaging47Text MessagingYou can send and receive text messages with the Short Message Service (SMS) using your mobile phone.Note! You cannot send SMS messages when your phone is in analog mode.Before Sending MessagesYou have several text messaging options that you can specify.Message OptionsYou can create the settings below as default for all your messages, or you can turn on the option Set On Send, which means that you choose the settings each time you send a message.•Message TypeYou can select how you want your text message to be interpreted by the recipient, for example, as a text message or as a fax or email message.•Message AlertYou can choose the signal you want to hear when you receive a message. You can choose between Click, Tone, or Silent.•Message Read Ack.You can choose if you would like a return receipt once a sent message is read by the recipient.•Msg PriorityYou can set the delivery options for your text message.•Callback NumberYou can enter a phone number in your text message for a return call. •SubjectYou can specify a subject for your text message.Sending MessagesYou can use your keypad to enter the message you want to send. You can send your message to one person or to a Ditto Nicole.book Page 47 Tuesday, August 28, 2001 11:11 AM
Text Messaging48predefined group, specified and saved in the phonebook. For more information on how to create groups, see “Groups” on page 22. When you send text messages to a group, you are charged for each member included in the group.1 Scroll to Messages, Select, SMS, Select, Send New, Select.2 Enter your message and press OK.3 Enter the recipient’s number or tilt the joystick to the left to retrieve the number from the phonebook or a group.4 Press OK to send the message. Sending msg appears in the display followed by Message has been sent.Saving the Message for Later UsePress the right softkey after you have entered your message. The message is saved in the Unsent menu.Sending a Message Later1 Scroll to Messages, Select, SMS, Select, Unsent Mail, Select.2 Select the message you want to send and press OK.3 Press Select again.4 Select Send and press Select. You may now edit your message.5 Press OK and send the message as previously described.6 Enter the recipient’s number or tilt the joystick to the left to retrieve the number from the phonebook or the call list.7 Press OK to send the message.Note! If the recipient’s phone does not support long messages, the messages are received one at a time.Saving Objects from a Text MessageWhen the email address, phone number, WAP address, picture, animation, or melody is highlighted, press Select. Then select to save the item and press Select.•A picture or animation is stored in My Pictures (press when sending a text message to see the list). Once the list is full, you will be prompted to overwrite another picture or animation.•A melody is saved under My Melodies in Sounds & Alerts.Ditto Nicole.book Page 48 Tuesday, August 28, 2001 11:11 AM
Text Messaging49•An email address or phone number is saved in the Phonebook.•A WAP address is saved in Bookmarks.Note! If you exit the message without saving the picture, the picture will be deleted.TemplatesIf you have one or more standard messages that you often use, you can save these as templates in your phone. You can save up to ten templates consisting of up to 50 characters each.Creating a Template1 Scroll to Messages, Select, SMS, Select, Templates, Select, Add New, OK.2 Enter the message and press OK.3 To send the message now, press Select when Use template for this msg.? appears in the display, and proceed as described in “Sending Messages” on page 47. The message is saved in the list of templates.4 If you do not want to send the message now, press the right softkey. The message is saved as a template for later use.Using a TemplateIf you want to use a template as a message, scroll to Messages, Select, SMS, Select, Templates, Select, select the template you want from the list and then select OK. The following Templates are included:•Add new? (Allows you to enter text and save as a new template)•I will be home at ___.•I will be at ___ until ___.•I will be ___ late for ___ on ___.•There is a meeting with ___ about ___ on ___.•OK, I got it.•Please call ___ at ___.•Please call me back.•Please get ___ from ___ by ___.•Please pick me up from ___ at ___.•See you later.To delete a template you have created, highlight the template you want to delete, and press CLR. You will be Ditto Nicole.book Page 49 Tuesday, August 28, 2001 11:11 AM
Text Messaging50asked to confirm deletion of the template. Press the left softkey to confirm deletion. You cannot delete any of the standard templates included in your phone.Receiving Text MessagesWhen you receive a text message, the phone beeps and the message New message Read now? appears in the display.Reading Text Messages1 Press the left softkey when you see the question New message Read now?.If you have received several messages, and you press the left softkey at the question above, you enter the Received mail. Select the message that you want to read and press the left softkey.2 Scroll through the message by tilting the joystick up or down. An arrow in the bottom right-hand corner of the display indicates that there is more text in the message. All parts of a long message may not be received at the same time... indicates that part of the message has yet to be received.Note! If the sender of the message wants you to reply, the display shows Reply requested Reply? when you press the left softkey at the end of the message. Press the left softkey again to reply. If you do not want to reply, press the right softkey.Saving Messages to Read LaterPress the right softkey when you see the question New message Read now?The message is saved in the phone and an envelope icon appears at the top of the display. If you want to read the message, you can retrieve it from the Received mail menu. indicates an unread message. indicates that the message is saved.List of OptionsIf you select a message, you can see a list of options: Delete, Reply, Forward, Save, Call, Mail To, Save, and Read Next.Ditto Nicole.book Page 50 Tuesday, August 28, 2001 11:11 AM
Text Messaging51Deleting MessagesThere are two ways to delete a message:•Select Delete in the list of options and press Select.•In the Received Mail menu, scroll to a message and press the CLR key.Replying to Messages1 Select Reply in the list of options and press Select.2 Select the way you want to reply to the message:•enter a new message•include the message you want to reply to and enter a reply•use a template and enter a reply and press Select.3 Enter your reply and press Select to send the message.Forwarding Messages1 Select Forward in the list of options, press Select.2 You can now edit the message. Press OK.3 Enter the recipient’s phone number, or tilt the joystick to the left to retrieve the number from the phonebook or the call list. Press Select to send.Note! You cannot forward a message that contains a picture.Calling the Message SenderSelect Call in the list of options and press Select.Tip! To call a phone number found in a message, press Select when the number is highlighted and then press Select again.Saving Embedded Phone Numbers1 When the number is highlighted, press Select.2 Select Save [number] and press Select.Sending to Embedded Email Addresses1 Make sure you have set the email gateway number.2 Select Mail To in the list of options and press Select.3 Enter a message and press Select.4 Press YES again to send the message.Ditto Nicole.book Page 51 Tuesday, August 28, 2001 11:11 AM
Using Voice Commands52Using Voice CommandsWith your phone, you can:•voice dial - call someone by saying the name and number type•answer and reject calls with your voice when using a handsfree kit•record or listen to voice memos by using voice commands•activate the voice control by saying a “magic word”You can save up to 10 voice commands (such as call, busy, or answer) and 30 voice tags (names) of 1-2 seconds each. When recording voice commands, make sure you are in a quiet environment.Before Voice DialingBefore you can start voice dialing, you need to turn on the voice dialing function and record your voice commands.Turning Voice Dialing On1 Scroll to Settings, Select, Voice Control, Select, VoiceSettings, Select, Voice Dialing, Select,2 Select On and press Select.Recording Number Types1 Now you are going to record a voice command for each number type you use with your phonebook contacts, for example “home”, “mobile” and so on.2 Instructions appear. Press OK.3 Select a number type and press OK.4 Lift the phone to your ear, wait for the tone and say the number type that you want to record. The voice command is played back to you.5 Press YES to save the voice command. If the recording is not OK, press NO and repeat step 5.You also need to record voice commands for each contact, that is the name, for example “John”.Ditto Nicole.book Page 52 Tuesday, August 28, 2001 11:11 AM
Using Voice Commands53Recording a Contact Name1 Scroll to Settings, Select, Voice Control, Select, VoiceCommands, Select, Contacts, Select, Add Voice Label, OK.2 Select a contact and press OK.3 Follow the instructions in the display.Note! An icon ( ) appears next to the contact names which have a voice command.Caller NameYou can choose whether you want to hear the recorded voice command for a name when you receive an incoming call.1 Scroll to Settings, Select, Voice Control, Select, VoiceSettings, Select, Caller Name, Select.2 Select On or Off.Voice DialingVoice Activated Dialing1 From standby, press and hold either the upper or lower side volume key until you hear a tone.2 Release the upper or lower side volume key, lift the phone to your ear and say a name, for example “John” after the tone. The name is played back to you.3 If you have saved several numbers for that contact: After a second tone, say a number type that you have recorded earlier, for example “home”. The number type is played back to you, and the call is connected.Note! Only the number types available for that contact are played to you. Other and Fax number types are not available for voice dialing.From standby, you can also initiate voice dialing and voice control of voice memos by:•pressing either the upper or lower side volume key.Ditto Nicole.book Page 53 Tuesday, August 28, 2001 11:11 AM
Using Voice Commands54•pressing and holding the handsfree button (when using a portable handsfree or a Bluetooth™ headset).•saying the Magic Word. See “Magic Word” on page 55.Voice AnsweringYou can answer or reject incoming calls by using your voice when using a portable handsfree or car handsfree kit.1 Scroll to Settings, Select, Voice Control, Select, VoiceSettings, Select, Voice Answer, Select.2 Check or uncheck the accessories you want to be able to use with voice answering by pressing the center push key or by pressing the left softkey.3 Press YES to exit.4 Follow the prompts.5 Lift the phone to your ear, wait for the tone and say a word such as “Answer” and press YES. If the recording was not OK, press the right softkey and repeat step 4.6 Say “Busy”, or another word. Press YES to save your recordings.Answering Incoming CallsWhen the phone rings, say “Answer”.Note! You can use any word to “tell” your phone to pick up an incoming call.Rejecting Incoming CallsWhen the phone rings, say “Busy”. The caller hears a busy tone.Recording Voice MemosYou can record voice commands (totalling approximately 60 seconds) to start a voice memo recording or to listen to voice memos.1 Scroll to Settings, Select,Voice Control, Select, VoiceSettings, Select, Voice Memo, Select.2 Select On and press Select.3 Instructions appear. Press OK.4 Lift the phone to your ear, wait for the tone and say “Record”.5 Say “Play” and press YES to save your recordings.Ditto Nicole.book Page 54 Tuesday, August 28, 2001 11:11 AM
Using Voice Commands55Starting a Voice Memo Recording1 From standby, press and hold either the upper or lower side volume key until you hear a tone.2 Release the upper or lower side volume key, lift the phone to your ear and say “Record”. The voice command is played back to you and a tone indicates that the recording has begun.3 To end the recording, press Select.Listening to Voice Memo Recordings1 From standby, press and hold the left softkey until you hear a tone.2 Release the left softkey, lift the phone to your ear and say “Play”. The voice command is played back to you.3 Listen to your voice memo recordings. Press the right softkey to stop.Magic WordYou can record a Magic Word that will activate voice recognition. You can use it as a voice command to allow totally handsfree access to voice control. Instead of pressing and holding the upper or lower side volume key, you say the Magic Word and then one of your recorded voice commands. The Magic Word is especially suitable when driving a car with a car handsfree kit installed, because you use external power instead of the battery power of your phone. You can also use the Magic Word when the phone is connected to a portable handsfree.Tip! Choose a long, unusual word which can easily be distinguished from ordinary background speech.1 Scroll to Settings, Select, Voice Control, Select, VoiceSettings, Select, Magic Word, Select.2 Select the accessories you want to be able to use with the Magic Word by pressing the center push key or by pressing the left softkey.3 Press YES to exit.4 Follow the prompts.5 Lift the phone to your ear, wait for the tone, and say the Magic Word.Turn off the Magic Word when you no longer need totally handsfree access, in order to save battery power.Ditto Nicole.book Page 55 Tuesday, August 28, 2001 11:11 AM
Using Voice Commands56Editing Your Voice CommandsUse the VoiceCommands submenu to keep your voice commands up to date by re-recording them or deleting the ones you do not use.Re-recording Commands1 Scroll to Settings, Select, Voice Control, Select, VoiceCommands, Select.2 Select the type of voice command and press Select.3 Select a voice command and press OK.4 Select Replace Voice and press Select.To listen to a recorded voice command, select Play Voice.5 Lift the phone to your ear, wait for the tone and say the command.You can also edit the voice command for a contact name in Edit Contact in the Phonebook menu.Tips•Try to record in an area where there is little or no background noise.•Try to record your voice with the same equipment that you normally use with your phone. For example, if you normally have your phone connected to a portable handsfree device when using voice commands, record your voice commands when your phone is attached to a portable handsfree device.•If you plan to use voice functions handheld mode, hold the phone up to the ear in the position that would normally be used on a call.•Begin speaking after the tone ends.•You can record labels that are up to 8 seconds in duration. Keep in mind that longer tags provide a higher recognition rate.•Shorter tags may cause a lower recognition rate. For example, the name “Tom” can easily be confused with “Tim”.•Record your voice using the same tone and inflection as you would when normally speaking. Try not to overpronounce or speak too slowly when recording.•When using Portable handsfree devices, you can easily activate voice dialing by pressing the button near the microphone until you hear a prompt.Ditto Nicole.book Page 56 Tuesday, August 28, 2001 11:11 AM
Using Voice Commands57TroubleshootingIf your phone cannot detect speech, one of the following might have happened:•You spoke too softly – try speaking more loudly.•You held the phone too far away – hold it as you do during a call.•The voice command was too short – it should be around one second long.•You spoke too late or too soon – speak immediately after the tone.•You may want to re-record the voice command.Ditto Nicole.book Page 57 Tuesday, August 28, 2001 11:11 AM
Inputting Text58Inputting TextYou can enter letters, for example, when you add names to the phonebook, write text messages, or enter WAP addresses.Apart from the way you normally enter letters in your phone, using multitap text input, you can use T9 Text Input for entering text messages and email, for example, if the input language you select supports this. T9 Text Input is a predictive input method and is a quicker way to write texts.Note! You can toggle between Multitap and T9 by pressing the OPTIONS key while in a text field.Before you start entering letters, you need to select the input languages that you want to use when writing.The available input methods are:•Multitap•T9 Text InputMultitap Text InputWhen saving names in the phonebook or when writing WAP addresses, you enter letters using multitap text input. You press each key as many times as needed to show the letter you want.In the following example, we are going to write a name:1 Scroll to Phonebook, Select, Add Contact, Select. Press Select again.2 Press the appropriate key, 1-9, 0, or # repeatedly until the character you want appears in the display. See the table of the Latin alphabet below:Example:•To en ter an ‘A’, press 2 once.•To en ter a ‘ B’, quickly press 2 twice.•To shift between capital and lower-case letters, press , then enter the letter.Ditto Nicole.book Page 58 Tuesday, August 28, 2001 11:11 AM
Inputting Text59T9 Text InputYou can use T9 Text Input when entering texts such as text messages. The T9 Text Input method uses a built-in dictionary to recognize the most commonly used word for every sequence of key presses. This way, you press each key only once, even if the letter you want is not the first letter on the key.When you press the keys, different words are suggested. If the word you want is not suggested, you can edit the word. The word is then added to the dictionary so that it is suggested the next time you use T9 Text Input.In the following example, we will start writing a text message:1 Scroll to Messages, Select, SMS, Select, Send New, Select.2 For example, if you want to write the word “How”, press 4 then 6 then 9.The word “How” appears.3 If the word shown is the one you want:•press 1 to accept and add a space.(To accept a word without adding a space, tilt the joystick to the right.)Press for1Space . @ ? ! - & : ‘ ¿ ¡ 2A B C Å Ä Æ à Ç 2 Γ3D E F è É 3 ∆ Φ4G H I ì 45J K L 5 Λ6M N O Ñ Ö Ø ò 67P Q R S ß 7 Π Σ8T U V Ü ù 89W X Y Z 90+ & @ / ¤ % $ £ ¥ \ § ¿ ¡ 0 Θ Ξ Ψ Ω# * ↵to delete letters and numbersto shift between capital and lowercase letterspress and hold to enter numbersDitto Nicole.book Page 59 Tuesday, August 28, 2001 11:11 AM
Inputting Text60If the word shown is not the one you want:•press 0 repeatedly to view alternative words (candidates). Accept a word and add a space by pressing 1.If you do not find the word you want by pressing 0:•Select Edit Word, YES.•Delete the entire word by pressing the left softkey, or delete one letter at a time by tilting the joystick to the right and then pressing repeatedly.•Write the new word using multitap text input and press YES. The word is added to the dictionary. The next time you enter 4 then 6 then 9 then word you just added to the dictionary will appear as one of the alternative words.Tip! Press to enter a full stop. To enter other punctuation marks, press and then 0 repeatedly. Accept by pressing .Press and hold to select an input method.Options•Edit Word – for T9 Text Input onlyEdit the suggested word by using multitap text input.•Add SymbolSymbols and punctuation marks are shown. Move between the symbols by using the arrow keys. Press YES to select a symbol.•Accept Word – for T9 Text Input only Accept the suggested word and add a space.•Candidates – for T9 Text Input onlyA list of alternative words is shown. Scroll to a word and press Select.•Rel. caps lock/Caps lockSwitch between capital and lower-case letters.•Input LanguageA list of the input languages that you selected earlier is shown. If you want to change the input language for the text you are writing, scroll to a language and press YES.Ditto Nicole.book Page 60 Tuesday, August 28, 2001 11:11 AM
Inputting Text61•Input MethodA list of input methods is shown. If you want to change the input method for the text you are writing, scroll to an input method and press YES.•HelpTurning Off the T9 Text InputIf you wish, you can turn off the T9 Text Input. This setting is valid for all input of texts – not only for the text you are currently entering.1 Scroll to Settings, Select, Language, Select, T9 Predictive, Select.2 Select On or Off.Ditto Nicole.book Page 61 Tuesday, August 28, 2001 11:11 AM
WAP Browsing62WAP BrowsingYour phone has a Wireless Application Protocol (WAP) browser which lets you connect to the Internet and access specially designed interactive services. WAP is a standard specially created for mobile communications devices and gives fast access to information and services on the Internet.Examples of WAP services you will be able to find are:•Ericsson Mobile Internet (http://mobileinternet.ericsson.com) offers you online access to customer services, user’s guides, and useful information when you are traveling•Reservation services•News, sports, and weather•Restaurants, cinemas, games, etc.•Banking and stock exchange quotes•Voicemail, email, and fax mailTerminologyIn this chapter, and in the Browser menu, you will see many new terms. Here is a brief description of some of the terms that may appear.WAP - Wireless Application Protocol. A standard created specifically for mobile communications devices that gives you fast and easy internet access from your phone.WAP Gateway Address - The access number to your network service provider’s WAP gateway. Contact your network service provider if this information is not stored in your WAP Services settings.Bookmark - Like any Internet browser, your phone has the capability to store your favorite bookmarks.Homepage - The page your phone will default to when you begin browsing. Each profile has its own homepage.Profile - Customized settings to simplify browsing. Each profile has its own settings such as gateway number, homepage, password, and name.Ditto Nicole.book Page 62 Tuesday, August 28, 2001 11:11 AM
WAP Browsing63Preparing Your Phone for WAPBefore you can start using the WAP browser, you need to make sure that your access settings are set correctly. You need to set up your User ID and WAP Gateway address.Depending on your network service provider, you can receive the access settings you need in different ways.•When you buy your phone together with a WAP subscription. Your service provider has already entered all the WAP settings you need.•Manually. Your service provider will give you the settings you need. You can then enter them yourself.Entering the WAP Settings ManuallyThe WAP settings you enter will be associated with one of the WAP profiles. If you want to use more than one WAP profile, you need to specify the settings for each profile. See “Using WAP Profiles” on page 66.Note! Please refer to the information provided by your service provider before you enter your settings.Setting up a Data Connection1 Scroll to Browser, Select, WAP Settings, Select.2 Select a WAP profile, Select.3 Access, Select, WAP Gateway, Select, User ID, Select.4 Enter the User ID to your WAP gateway, Select.5 Select Password, Select.6 Enter the password to your WAP gateway, Select.7 Select IP Address, Select.8 Enter the IP address to your WAP gateway, Select.An IP address looks something like this: 123.4.67.120.Note! An IP address consists of four groups of digits, with a maximum of three digits in each group. If one of your digit groups consists of only one or two digits, you have to enter a zero (0) in front of the original digit for each digit that is missing. For example, if you were to enter the IP number above, 123.4.67.120, you should enter 123.004.067.120.You have now entered the settings you need to start browsing the internet.Ditto Nicole.book Page 63 Tuesday, August 28, 2001 11:11 AM
WAP Browsing64Opening a WAP PageThere are three ways to open a WAP page:•by opening a homepage•by entering the URL or address of the WAP page•by opening a bookmark that you have saved.Opening a HomepageWhen you buy your phone, the Ericsson Mobile Internet is set as your homepage for all WAP profiles. If you want, you can choose another WAP page as your homepage. See “Changing Homepages” on page 64.1 Browser, Select.2 Select the top menu, Select.The name of this menu depends on what you have chosen to call or name it. See “Renaming WAP Profiles” on page 67.Entering a URL1 Scroll to Browser, Select, Enter Address, Select.2 Enter the address, for example mobileinternet.ericsson.com, Select.Tip! If the WAP address starts with http://, you do not need to enter this prefix. You only need to enter the prefix if it starts with something else, for example, ftp://.Changing Homepages1 Scroll to Browser, Select, Mobile Internet, Select.2 Select the WAP Profile you want to change, Select.3 Chg Homepage, Select.4 Enter a name for this homepage, Select.5 Enter the address to the WAP page you want to set as your homepage, Select.Options While BrowsingWhile you are browsing, press the OPTIONS key to reach an Options submenu. The menu may look different depending on what page you are browsing. It can, for example, contain special features of the WAP page you are currently browsing. It always, however, contains the following options:•Go to Menu. Go back to the Browser menu where you can access your bookmarks.Ditto Nicole.book Page 64 Tuesday, August 28, 2001 11:11 AM
WAP Browsing65•Reload Page. Get the latest version of the WAP page you are browsing.•Add Bookmark. Add the page you are currently browsing to your list of bookmarks.•New Homepage. Set the current WAP page as your homepage.•Exit WAP. End your browsing.Ending your WAP Session1 When you are browsing, press the OPTIONS key until the Options submenu appears.2 Select to Exit, Select.3 Data Call in Progress Remain Connected? will appear.4 Press the left softkey to continue the WAP session or press the right softkey to exit and return to standby.BookmarksIf there are some WAP pages that you visit often, you can save these as bookmarks, making it easier to go to these pages.You can add bookmarks only while you are browsing.Adding Bookmarks1 Scroll to Browser, Select, Mobile Internet, Select.2 Go to the WAP page you want to bookmark.3 Press the OPTIONS key until the Options submenu appears.4 Select Add Bookmark, Select.Wait until the message Bookmark Saved appears in the display.Opening Bookmarks While Browsing1 When you are browsing, press the OPTIONS key until the Options submenu appears.2 Scroll to Go to Menu, Select, Bookmarks, Select.3 Select the bookmark you want, Select.4 Select Go to, Select.Ditto Nicole.book Page 65 Tuesday, August 28, 2001 11:11 AM
WAP Browsing66ImagesIf you do not want to display the images on the WAP page that you are browsing, you can turn them off. Images take longer to download, but the WAP page may look better with them.If an image contains a link, you can access the link by highlighting the image, then pressing YES.If you turn off the Image Load function, the images appear as icons in the display.Turning the Image Load Function On or Off1 Scroll to Browser, Select, WAP Settings, Select.2 Select a WAP Profile, Select.3 Image Load, Select.4 Select On or Off, Select.Downloading Melodies Using Your WAP BrowserTo download melodies using your WAP browser, navigate to a WAP site that supports ring melody download using the text/x-vmel MIME (internet connect) type. When your phone receives a melody of this type, you will first be prompted to play the song, and then to save the song into one of the My Melodies storage slots on your phone.Download TimeoutSome WAP pages can take a long time to download. You can specify the time that should pass before the download attempt is stopped.1 Scroll to Browser, Select, WAP Settings, Select.2 Select a WAP profile, Select.3 Access, Select, Response Timer, Select.4 Enter how many seconds you want the download to continue before it stops. Press Select.Using WAP ProfilesYour phone comes with three WAP profiles to help simplify your browsing. You can, for example, associate one profile to your service provider’s WAP page and one to your company’s intranet. Instead of having to enter Ditto Nicole.book Page 66 Tuesday, August 28, 2001 11:11 AM
WAP Browsing67the access settings, when you want to switch between your service provider’s WAP page and your company’s intranet, you can simply switch profiles. It is important to remember two things about the WAP profiles:•You can set a different homepage for each WAP profile. When you switch profiles, the homepage changes to the homepage set for that profile.•A saved bookmark may not work with all WAP profiles. When you save a bookmark, it is associated with the WAP profile that you are currently using. If you cannot access a bookmark, you may solve the problem by switching profiles and then accessing the bookmark again.Switching WAP Profiles1 Scroll to Browser, Select, Select Profile, Select.2 Select a WAP profile, Select.This WAP profile is active until you switch again.Renaming WAP ProfilesYou can change the name of your WAP profiles to a name of your own choice.1 Scroll to Browser, Select, WAP Settings, Select.2 Select a WAP profile, Select.3 Select Rename, Select.4 Enter a new name, Select.Edit the homepage of a WAP profile1 Scroll to Browser, Select, WAP Settings, Select.2 Select a WAP profile, Select.3 Select Edit Homepage, Select.4 Enter a guiding name for this profile, Select.5 Enter the address to the WAP page you want to set as your homepage for this profile and press Select.SecurityWhen you use certain WAP services, for example e-commerce, you need a secure connection between your phone and the WAP gateway. To establish secure connections, you need to have certificates saved in your phone. If you have certificates saved in your phone, you trust all WAP gateways that the certificate supplier (for example, a network service provider), has certified. A certificate contains, for example, the name of the certificate supplier and a validity period.Ditto Nicole.book Page 67 Tuesday, August 28, 2001 11:11 AM
WAP Browsing68Checking the Certificates in Your PhoneScroll to Browser, Select, WAP Settings, Select, Certificates. Now you can see a list of the available certificates.Setting a Secure Connection1 Scroll to Browser, Select, WAP Settings, Select.2 Select the profile for which you want the secure connection.3 Select WAP Security, Select.4 Select On, Select.Ditto Nicole.book Page 68 Tuesday, August 28, 2001 11:11 AM
Using the Calendar69Using the CalendarYou can use the calendar to keep track of important meetings that you need to attend, phone calls that you need to make or tasks that you need to do.Note! For calendar synchronization software, visit http://mobileinternet.ericsson.com.Appointments and TasksYou can save many appointments and tasks in your calendar, depending on the size of each item. You can choose to add a new appointment or task, or use an old appointment or task as a template by copying and editing it.•Appointments: meetings, dates, travel, vacation, phone calls, etc.•Tasks: make a phone call, send a message, pay bills, etc.You can fill in different types of information about the appointments or task.Adding Appointments1 Scroll to Extras, Select, Calendar, Select, Add Apptmt., Select.2 Choose the type of event or appointment and press OK.3 Press Edit and enter a subject.4 Scroll to Location, press Edit, enter a location, and so on.5 Once you have entered the type of appointment and location, scroll to Proceed? and press Edit.6 Press Edit and enter a start date. Scroll to Time, press Select, enter a start time, and so on. Note! Use the # key to toggle am/pm.7 Scroll to Proceed? and press Edit.8 Select the reminder interval you want, for example 5 min before, and press OK. You now have the following options:•Save and Close - Select to save and exit. Ditto Nicole.book Page 69 Tuesday, August 28, 2001 11:11 AM
Using the Calendar70•Recurrent App.- Select if the appointment is recurrent.•Class - Select if you wish to set the appointment as public or private.Adding New Tasks1 Scroll to Extras, Select, Calendar, Select, Add Task, Select.2 Choose a task and press OK.If you choose phone call, enter a number and press OK.If you choose message, select a type of message and press OK.If you choose miscellaneous, select a type and press OK.3 Press Edit and enter a subject. Scroll to Descr., press Edit and enter a description.4 Scroll to Proceed? and press Edit.5 If you want to set a reminder, scroll to Set reminder and press Ok. Enter a reminder date and press Ok.6 A list of options appears. Confirm with Save And Close, Select.Viewing Your CalendarTo view your calendar content, scroll to Extras, Select, Calendar, Select and then select one of the following:•View Today. This shows all the appointments for the current day and the Tasks that have not been completed. An icon appears next to those appointments that cover the whole day. •View All Tasks. This shows all your entered Tasks. Scroll to the task you want to view and press Select.•View Month. This shows a whole month, with the current day in a square. Move within and among the weeks by using the joystick. Press Select to enter a certain day. Days on which you have appointments are marked in bold.•View Week. This shows a whole week. All your appointments and Tasks are shown as grey boxes. You enter a certain day by pressing Select when that day is highlighted. Ditto Nicole.book Page 70 Tuesday, August 28, 2001 11:11 AM
Using the Calendar71EditingYou may wish to edit an appointment or a task, for example, by changing the date or location.Editing or Deleting Appointments1 In the calendar, scroll to the day of the appointment you want to edit and press Select.Note! You can quickly delete the entry by pressing CLR. Delete? appears, press Select.2 Press to Edit, Delete, Reschedule, or Copy. 3 Choose Edit and press Select.4 Proceed as described in “Adding Appointments” on page 69.5 When you have finished, scroll to Save And Close, Select.Editing or Deleting Tasks1 Scroll to Extras, Select, Calendar, Select, View all tasks, Select.2 Choose a task.Press to view the list of options. Options include: Mark “Done”, Edit, Delete, Copy, and Call.3 When you have finished, scroll to Save And Close, Select.Calendar SettingsTo view your calendar options, scroll to Extras, Select, Calendar, Select, Options, Select, and then select one of the following:•Status. Use this to check when you last synchronized your calendar, how much space is left for new appointments and Tasks.•Class View. You can choose whether to see only the private calendar entries, only the public ones, or both.•Delete all. Deletes all appointments and Tasks in the calendar.•Reminders. You can choose to be reminded of calendar events Always or If Power On.Ditto Nicole.book Page 71 Tuesday, August 28, 2001 11:11 AM
Using the Calendar72Synchronizing Your Phone and PCTo enhance use of your Calendar features, you may want to purchase XTNDConnect PC or download a free abbreviated version of XTNDConnect PC (does not include email capabilities). XTNDConnect PC is a software application that allows you to synchronize your contacts, calendar, tasks, and email between your mobile phone and popular PC applications on your computer. To use your Ericsson mobile phone with the XTNDConnect PC program, you will need the following:•A functional serial port on your computer•Microsoft Windows 95/98 Se/Me/NT4/2000•An Ericsson serial interface cable (RS232 Cable DRS-11)•Ericsson Mobile Phone Monitor (a software interface between your mobile phone and the XTNDConnect PC software)•Purchase XTNDConnect PC (http://www.extendsystems.com/go/ericsson) or download a free version of XTNDConnect PC for Ericsson phones only (http://mobileinternet.ericsson.com). Ditto Nicole.book Page 72 Tuesday, August 28, 2001 11:11 AM
Making Data and Fax Calls73Making Data and Fax CallsYou can use your phone in Wireless Modem Operation when it is powered on with an Ericsson serial interface cable attached from your phone to your computer.Your Ericsson mobile phone contains a modem similar to the modems you use to connect your computer to your home or office telephone service. Rather than connecting to standard telephone lines, however, the modem in your mobile phone allows you to connect your computer to the mobile telephone system. In places where mobile network service providers provide the necessary support, you can use your mobile phone to send or receive faxes, upload or download data files, or access the Internet. This chapter will assist you with setting up your computer and phone to handle data, fax, and Internet calls on the mobile network.Differences Between Data, Fax, and Internet CallsYour Ericsson mobile phone can handle data, fax, and Internet calls, but each type of call requires corresponding software that must be running on your computer.Data CallsData calls are placed to exchange computer files between two computers. While the data connection is in place, files can be transferred between the connected computers, according to the capabilities of the software in use. When a data call is made, the connection will remain in place until it is closed by one of the computers involved. To make or receive data calls with your Ericsson mobile phone, you must have a properly configured communications program running on your computer.Ditto Nicole.book Page 73 Tuesday, August 28, 2001 11:11 AM
Making Data and Fax Calls74Fax CallsFax calls are placed to send fax messages. When a fax message has been sent, your fax software or the originating fax machine will terminate the call. To make or receive fax calls with your Ericsson mobile phone, you must have a properly configured fax program running on your computer.Internet CallsInternet calls are placed to Internet Service Providers (ISP) when you want to use email or access websites on the World Wide Web. To make Internet calls, you must have an account with an ISP and a properly configured Internet access program (browser) running on your computer. When your software is installed and set up to dial your ISP, calls can be made using the normal dialing procedure. Once a connection to your ISP is established, it will remain in place until you disconnect or until it is automatically disconnected due to the degradation of signal quality or due to inactivity.Note! Throughout this chapter, references to data/fax/internet will be referred to as data.Before You StartBefore setting up your phone for data operation, do the following:•You must have a serial interface cable (Ericsson RS 232 data cable DRS-11) to connect your Ericsson mobile phone to your computer. For more information about ordering this and other accessories, see “Ordering Accessories” on page 81.•Confirm that your mobile service provider supports digital data services in your planned usage area.•Verify that you have the necessary subscription.Note! The availability of digital mobile voice service does not necessarily imply that your mobile service provider supports digital data operation.Ditto Nicole.book Page 74 Tuesday, August 28, 2001 11:11 AM
Making Data and Fax Calls75Setting Up Your ComputerTo operate properly with the modem in your Ericsson mobile phone, make sure that your computer has the following hardware and software:•A functional serial port•An operating system that supports data access software, such as Windows 95 or Windows 98•Appropriate fax (class 2.0), Internet access, or file transfer softwareNote! Class “2.0” is different from Class “2”.Initial SetupSuccessful first-time setup of your phone and computer for data operation involves the following steps:1 Connect your computer to your phone with your Ericsson DRS-11 serial interface cable. The cable has a plug on one end that matches the receptacle on the bottom of your Ericsson mobile phone. The other end of the cable has a 9-pin female connector that matches the standard 9-pin serial interface port connector. Connect one end of the cable to your Ericsson mobile phone and the other end to the serial port on your computer.Note! If you are trying to connect to a 25-pin serial interface port on your computer, you will need an adapter. You can purchase a 25-pin serial interface port adapter at most computer supply stores.2 Install your modem control software (driver).The modem driver that you need for your Ericsson mobile phone is available at http://mobileinternet.ericsson.com. Refer to this web site for help with installing drivers for different operating systems.3 Set up your data access software according to the instructions supplied on http://mobileinternet.ericsson.com.Ditto Nicole.book Page 75 Tuesday, August 28, 2001 11:11 AM
Making Data and Fax Calls76OperationMaking and Receiving Data and Fax CallsWhen your phone and computer are properly set up, you can send a fax, or initiate data calls, as with any other modem.Review the instructions from your mobile service provider that describe the procedures and rules for making and receiving data calls in your area.Note! To avoid unnecessary airtime charges, terminate your data calls, by pressing the No key, as soon as you have finished transferring files.DisconnectingDisconnect your Ericsson mobile phone from your computer by disconnecting the cable from your phone and from the serial port on your computer.Use with Other Ericsson ChargersTo charge your phone’s battery with an Ericsson rapid or travel charger during data operation, do the following:1 Plug one end of the serial interface cable into your phone.2 Plug the other end of the serial interface cable into the serial port on your computer.3 Plug the charger cable into the bottom of the connector.4 Plug the charger cable into the wall outlet.Achieving Best PerformanceCharging your BatteryBoth your Ericsson mobile phone and your laptop computer batteries should be well-charged before starting data operation. This will help you avoid interruptions due to loss of power.You can charge your phone’s battery with an Ericsson charger during data/fax operation as previously described.Ditto Nicole.book Page 76 Tuesday, August 28, 2001 11:11 AM
Making Data and Fax Calls77Signal StrengthIt is important to maintain a good signal path between the phone and the mobile telephone system when making data calls. Signals will generally be stronger when the phone is in an upright position. If you are indoors, your signal will generally be stronger when the phone is near a window.In a VehicleIt is possible to receive data calls when inside your vehicle. Operation from a moving vehicle may not be satisfactory because data may be lost when your call is transferred from one mobile base station to another. Be sure to give full attention to driving and pull off the road and park before making or receiving calls, if driving conditions so require.Transmission DisturbancesBrief interruptions of mobile telephone signals that would not be bothersome during a voice call may cause problems during data operation, depending upon the error correction capabilities of the software being used. Such interruptions are uncommon during stationary operation, but can be caused by vehicles or people passing nearby, especially in areas of low signal strength. You can use the signal strength indicator on your phone to verify that you have a good signal path.Troubleshooting1 You cannot set up or maintain a data/fax session.This will occur if you are inadvertently originating a voice call when attempting a data/fax call. To correct the problem, do the following:aFrom the Start menu on your Windows desktop, click on Settings, then Control Panel.b Double-click the Modems icon.c Select the General tab.dSelect Ericsson R300d/R300LX/T60d/T60LX from the pull-down list.eClick Properties.fClick General. Make sure that the maximum speed is set to 19200.g Select the Connection tab.hClick Advanced.Ditto Nicole.book Page 77 Tuesday, August 28, 2001 11:11 AM
Making Data and Fax Calls78i In the Extra settings box, type the following: &C1jClick OK to return to the Connection tab.kClick OK to return to Modem Properties.lClick Close.Note! If you are using an application that supplies its own box for entering extra settings, then type the following command string into that box as well:+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;Ditto Nicole.book Page 78 Tuesday, August 28, 2001 11:11 AM
Troubleshooting79TroubleshootingMy phone does not turn On.Recharge or replace the battery.My phone does not ring when a call is received.Check for Ringer Off () or Silent Mode () icons on the standby screen.My signal strength varies.This is a common occurrence. Transmitters are set in geographic areas, and coverage is not 100% all of the time. Signal strength varies as you travel between cells.I cannot connect to the modem.Make sure that your serial interface cable is connected to both your phone and your computer. If the problem still exists, consult your computer’s user’s guide.I cannot receive a data call.You may need to configure your phone manually to receive a data call.I am having problems downloading information.Make sure that your phone is still in Wireless Modem Operation by checking your phone’s display. If you travel to a region with a weak signal, the connection can be dropped. If this happens, you will need to re-establish a connection to the internet once you have enough signal strength.I do not see the WAP icon.You are not in an area with strong enough service to establish a modem connection.Ditto Nicole.book Page 79 Tuesday, August 28, 2001 11:11 AM
Troubleshooting80Error MessagesBattery lowThe battery power is low. When the phone shuts itself off, replace the battery with a fully charged one, or use an alternate power source, such as a travel charger.No memoryDeleteYour text message memory is full. Erase some stored messages before you can receive more messages.Network not respondingYour data service is not active in your network or you are out of signal strength. Check your roaming map or call Technical Support to load your data service into the WAP network.Server not respondingYour data service is not set up in the gateway or the wrong gateway is specified in your phone. Do one of the following:• Confirm the correct gateway address is entered and active• Call to load your data service in the gateway.Ditto Nicole.book Page 80 Tuesday, August 28, 2001 11:11 AM
Troubleshooting81Accessories, Accessibility and InternetTechnical Assistance• North America - 1-800 ERICSSON (1-800-374-2776)• Latin America - +1-305-755-6789• Other countries - +1-919-472-7908Ordering AccessoriesYou can purchase Ericsson accessories by:• Visiting http://www.ericsson.com/phones• Calling +1-305-755-6789 (outside the U.S.)1-800-374-2776 (inside the U.S.)• Visiting your local Ericsson retailer.Accessible Solutions/Special NeedsFor information on Accessible Solutions for individuals with special needs call the Ericsson Special Needs Center at +1-877-878-1996 (TTY) or +1-877-207-2056 (voice), or visit the Ericsson Special Needs Center at:http://www.ericsson-snc.comInternetVisit Ericsson on the internet at: http://www.ericsson.com/phones.Mobile InternetVisit the Ericsson Mobile Internet at: http://mobileinternet.ericsson.com for online access to synchronization software, customer services, user’s guides, and other useful information.Ditto Nicole.book Page 81 Tuesday, August 28, 2001 11:11 AM
Limited Warranty82Limited WarrantyThank you for purchasing this Ericsson Product. To get maximum use of your new Product, we recommend that you follow a few simple steps:•Read the Guidelines for Safe and Efficient Use.•Read all the terms and conditions of your Ericsson Warranty.•Save your original receipt. You will need it for warranty repair claims. Should your Ericsson Product need warranty service, please return it to the dealer from whom it was purchased, or contact your local Ericsson Certified Call Center or visit www.ericsson.com/consumers to get further information.Our WarrantyEricsson warrants this Product to be free from defects in material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year.Any Ericsson accessory is covered by a warranty period of one (1) year from the date of its original purchase by a consumer in accordance with the applicable terms and conditions stipulated herein.What We Will DoIf, during the warranty period, this Product fails to operate under normal use and service, due to improper materials or workmanship, Ericsson subsidiaries, authorized distributors, service partners will, at their option, either repair or replace the Product in accordance with the terms and conditions stipulated herein.Conditions1 The warranty is valid only if the original receipt issued to the original purchaser by the dealer, Ditto Nicole.book Page 82 Tuesday, August 28, 2001 11:11 AM
Limited Warranty83specifying the date of purchase and serial number, is presented with the Product to be repaired or replaced. Ericsson reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the Product from the dealer.2 If Ericsson repairs or replaces the Product, the repaired or replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced faulty parts or components will become the property of Ericsson.3 This warranty does not cover any failure of the Product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with Ericsson’s instructions for use and maintenance of the Product. Nor does this warranty cover any failure of the Product due to accident, modification or adjustment, acts of God, improper ventilation or damages resulting from liquid.4 Since the cellular system on which the product is to operate is provided by a carrier independent from Ericsson, Ericsson will not be responsible for the operation, availability, coverage, services or range of that system.5 This warranty does not cover Product failures due to improper repair installations, modifications or service performed by a non-Ericsson service partner or opening of the Product by non-Ericsson certified persons.6 The warranty does not cover Product failures which have been caused by use of non-Ericsson original accessories.7 Tampering with any of the seals on the Product will void the warranty.8 THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR Ditto Nicole.book Page 83 Tuesday, August 28, 2001 11:11 AM
Limited Warranty84FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL ERICSSON BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.Some countries/states do not allow the exclusion or limitation of incidental or consequential damage, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you.This warranty gives you specific rights, and you may also have other legal rights which may vary from country/state to country/state.International ServiceYou can have your Ericsson Product serviced within the warranty period in any country where an identical Product is sold by an authorized Ericsson distributor. To find out if your Product is sold in the country you are in, please call the local Ericsson Certified Call Center. In order to be granted service, you have to present your original receipt specifying the date of purchase and serial number. Please observe that certain services may not be possible elsewhere than in the country of original purchase, for example due to the fact that your Ericsson Product may have an interior or exterior which is different from equivalent models sold in other countries. It may not be possible to repair SIM-locked Products.Ditto Nicole.book Page 84 Tuesday, August 28, 2001 11:11 AM
Index85IndexAAccessibility 81Accessing Menus 21Accessories 81Alarm Clock 37Analog Indicator 12Appointments 69Assistance 81AutoArea Code 32Keylock 35Prefix 32BBatteryAttaching 16Disposal 8First-time Use 17Information 7Browser 62CCalendarAdding Appointments 69Adding Tasks 70Editing 71Settings 71Using 69Viewing 70Call Info Menu 25Call List 26Ditto Nicole.book Page 85 Tuesday, August 28, 2001 11:11 AM
Index86Call Timers 27Calling Cards 23CallsData 73Fax 73Making 19Receiving 19Restrict 32Charging 16, 17, 18Contacts 42DData Calls 73Data/Fax/Internet CallsDisturbances 77In Vehicles 77Initial Setup 75Making 76Performance 76Date 38Digital Indicator 12EEarpiece Volume 20Error 80Error Message 80Low Battery 80Network Not Responding 80No Memory 80No Response 80Server Not Responding 80Extras Menu 37FFax Calls 74HHearing Aids 5Ditto Nicole.book Page 86 Tuesday, August 28, 2001 11:11 AM
Index87IIcons 12Call List 26Standby Screen 12Internet 34, 62, 81Internet Calls 74KKeys 13, 14MMagic Word 55MakingCalling Card Calls 23Calls 19Data Calls 73Fax Calls 73MenuBrowser 39Call Info 25Extras 37Messages 24My Shortcuts 40Ongoing Call 28Phonebook 21Settings 28MenusAccessing 21Using 21Messages Menu 24Missed Calls 26Mobile Internet 81Muting Microphone 20My Shortcuts Menu 40OOngoing Call Menu 28Options Key 13Ditto Nicole.book Page 87 Tuesday, August 28, 2001 11:11 AM
Index88PPacemakers 4PauseDialing 41Phone Views 11PhonebookAdding Contacts 41Calling Contacts 42Editing 43Menu 21Using 41ProblemCannot Download 79Cannot Receive Data Call 79Low Battery Power 80Modem Will Not Connect 79No WAP Icon 79Varying Signal Strength 79Will Not Power On 79Will Not Ring 79ProductCare 1Disposal 7RReceiving Calls 19Restrict Calls 32RF Information 2SSAR Information 2Settings Menu 28SMSEditing Messages 47Message Types 47Receiving 50Reply Requested 47Sending 47Templates 49Softkeys 13Sort Order 42Ditto Nicole.book Page 88 Tuesday, August 28, 2001 11:11 AM
Index89Special Needs 81Speed Dialing 43StopCharacter 42Dialing 41Super Speed Dialing 43SynchronizingCalendar 72Phonebook 44TTasks 70Technical Assistance 81Text InputMultitap 58Options 60T9 59Timer 38TTY Phone Number 81VVoiceAnswering 54Dialing 52, 53Memos 54Voice Memo 37WWAPEnding Your Session 65Settings 63Ditto Nicole.book Page 89 Tuesday, August 28, 2001 11:11 AM
Ditto Nicole.book Page 90 Tuesday, August 28, 2001 11:11 AM
ERICSSON Z T60ds Quick CardNo service is available.Your phone is in Analog mode.Your phone is in Digital mode.Magic Word is active.Meeting profile is active.Car kit profile is active.Home profile is active.Work profile is active.Outdoors profile is active. Handsfree profile is active.Shows current signal strength.Shows current battery status.Alarm is set.))You have a new message. The number text to the envelope indicates how many messages you have.You have missed a call.Indicates an incoming call in Call list.Indicates an outgoing call in Call list.Keylock is active. Unlock by pressing Options key followed by CLR and the left softkey.Ringer is off. Turn On by pressing Options key.Call screening is activated.Silent mode is On.Ditto Nicole.book Page 91 Tuesday, August 28, 2001 11:11 AM
AE/LZT 123 XXXX R1Emergency CallsEnter your local emergency number and press the left softkey.Scroll Through MenusTilt the joystick to the right.Select a Menu or Save a SettingPress left softkey.Cancel Action or Move Back in MenusPress right softkey.Speed DialEnter position number (2-9) and press CALL.Redial Last Dialed NumberPress left softkey from standbyAnswer CallPress the left softkey.End CallPress the right softkey.Call VoicemailPress and hold 1.Turn Phone On/OffPress and hold the power key.Call Number Shown in DisplayPress the left softkey.Change Ear Volume (During Call)Press upper or lower side keyMicrophone Mute (During Call)Press and hold CLR.KeylockPress and hold OPTIONS, then select Turn keylock on or Turn Keylock Off from the list. Press the left softkey to select.Silent ModePress and hold OPTIONS.Websitehttp://www.ericsson.com/phonesTechnical SupportNorth America - 1-800 ERICSSON Latin America - +1-305-755-6789Other Countries - +1-919-472-7908Ditto Nicole.book Page 92 Tuesday, August 28, 2001 11:11 AM
You can quickly access several commonly used menus by tilting the joystick left or right. The menus are organized in a circle. Quickly access menus and settings using the numbers that appear next to each menu and setting. For example, access your Calendar by pressing left or right then 3 to access the Call Info menu. Then press 2 to access the Call list submenu.* Depending on whether a call is ongoing or not, either the Call info or the Ongoing call menu is shown.1.Call Contact2.Add Contact3.Edit Contact4.My Numbers5.Groups6.Calling Cards7.Options8.Memory Status1.Voicemail2.Email3.SMS4.Browser5.Empty Mailboxes6.Options7.Memory Status1.Missed Calls2.Call List3.Usage Tracker4.Options1.Turn off Tones *2.Hold call *2.Switch calls *3.Release active *4.Retrieve Call *5.Call Info *1.Sounds & Alerts2.Profiles3.Call Options4.Display5.Language6.Time and Date7.Locks8.Voice control9.Networks0.Reset settingsData Comm.1.Voice Memo2.Calendar3.Time4.Games5.Calculator6.Code Memo7.Pictures8.Accessories1.Mobile Internet2.Bookmarks3.Push Inbox4.Enter Address5.Resume6.Select Profile7.Clear Cache8.WAP Settings1.Edit shortcutsDitto Nicole.book Page 93 Tuesday, August 28, 2001 11:11 AM

Navigation menu