HBC radiomatic TX691 Transmitter Module User Manual UM TX691 V2

HBC-radiomatic GmbH Transmitter Module UM TX691 V2

User Manual

User Manual Transmitter Module TX 691 UM-TX691-V2.DOC [ Word 2002 ] SEDH/DOKUS Page 1 / 5 HBC-radiomatic GmbH • 74564 Crailsheim • Germany Information and specifications subject to change without notice. 2006-06-26 www.hbc-radiomatic.com HBC – Transmitter Module TTXX 669911
User Manual Transmitter Module TX 691 UM-TX691-V2.DOC [ Word 2002 ] SEDH/DOKUS Page 2 / 5 HBC-radiomatic GmbH • 74564 Crailsheim • Germany Information and specifications subject to change without notice. 2006-06-26 www.hbc-radiomatic.com Manufactured by: HBC-radiomatic GmbH Haller Strasse 47 – 53 74564 Crailsheim, Germany Tel: +49 79 51 3 93–0 Fax: +49 79 51 3 93–50 E-mail: info@radiomatic.com http://www.hbc-radiomatic.com HBC-radiomatic GmbH is not liable for any misprints or errors! – All rights reserved. ™ HBC-radiomatic is a registered German trademark. © 2006 – 06 , HBC-radiomatic GmbH , 74564 Crailsheim , Germany No part of any software or of the present document may be reproduced in any manner whatsoever without the expressed written permission of HBC-radiomatic GmbH.
User Manual Transmitter Module TX 691 UM-TX691-V2.DOC [ Word 2002 ] SEDH/DOKUS Page 3 / 5 HBC-radiomatic GmbH • 74564 Crailsheim • Germany Information and specifications subject to change without notice. 2006-06-26 www.hbc-radiomatic.com Table of Contents Warnings ...................................................................... 4 Technical Data.............................................................. 5
User Manual Transmitter Module TX 691 UM-TX691-V2.DOC [ Word 2002 ] SEDH/DOKUS Page 4 / 5 HBC-radiomatic GmbH • 74564 Crailsheim • Germany Information and specifications subject to change without notice. 2006-06-26 www.hbc-radiomatic.com Warnings This device complies with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications by the user could void the user’s authority to operate the equipment! NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
User Manual Transmitter Module TX 691 UM-TX691-V2.DOC [ Word 2002 ] SEDH/DOKUS Page 5 / 5 HBC-radiomatic GmbH • 74564 Crailsheim • Germany Information and specifications subject to change without notice. 2006-06-26 www.hbc-radiomatic.com Technical Data Operating temperature range: –30 ... +70 °C Operating voltage: + 3.3 ... 5.25 V Current consumption transmit: ca. 55 mA Current consumption stand-by: ca. 27 mA Current consumption off: <50 µA Frequency range: 902.025 ... 927.575 MHz Channel pattern: 25 kHz Frequency deviation: +/– 5 kHz Modulation type: 25K0F2D Maximum field strength: 50 mV/m @ 3 m Switch-over time (stand-by - transmit): < 3 ms Data rate: 4762 Baud Modulation: AFSK LF transmission bandwidth: 150 Hz … 4.8 kHz

Navigation menu