HCS RC344A REMOTE CONTROL User Manual x

HCS (Suzhou) Limited REMOTE CONTROL x

User Manual

Download: HCS RC344A REMOTE CONTROL User Manual x
Mirror Download [FCC.gov]HCS RC344A REMOTE CONTROL User Manual x
Document ID3998796
Application ID5ihwACER7s1wTDSv2h2mjw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize15.29kB (191113 bits)
Date Submitted2018-09-10 00:00:00
Date Available2018-09-10 00:00:00
Creation Date2018-08-31 19:08:53
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2018-09-10 19:14:36
Document TitleMicrosoft Word - User manual.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: baclks77

Product Name: Remote Control
Product Model No.: RC3441507/01BR
Version 1.4
Author: Scarlett
Remote control can be programmed to operate some features on TVs or audio/video equipment.
The key features of the remote are:
• The Remote works in IR, Bluetooth interface.
• The remote uses Bluetooth for two‐way communication to the STB
• Like Bluetooth eliminates the need for the remote and the paired devices to be in
line of sight to each other.
• The Remote has a touchpad. Basic operations and functions can be made by sliding and
pressing the touchpad.
• If the remote is not paired to a STB, the touchpad can be used for functions like Up. Down, Left,
Right and Select.
• Once the remote is paired to a STB, it can send absolute touch data to the STB Voice
recognition is available with the Remote. Voice search will only work when the remote is paired
to the STB.
Activating Bluetooth
To pair the remote control to the STB, perform the following steps:
1. Press and HOLD MUTE and VOL+ at the same time until the blue light blinks after this.
2. STB enters searching mode and choose the remote control.
3. Pair with STB.
Deactivating Bluetooth
To deactivate the Bluetooth Transmitter on the remote control, perform the following steps:
The RCU pairing can be cleared pressing and holding <> keys simultaneously for 3
seconds. The RCU should also send the un‐pairing message to STB so that the STB can remove the
pairing entry.
RESTORING FACTORY DEFAULT SETTINGS
To reset all the functions of the remote control to the factory default settings following these
steps:
1. Press and hold MUTE and SELECT at the same time until the green light flashes twice.
Federal Communications Commission Interference Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirment. The device can be used
in portable exposure condition without restriction.
Attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This product generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver s
connected.
—Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : baclks77
Create Date                     : 2018:08:31 19:08:53+08:00
Modify Date                     : 2018:09:10 19:14:36-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:09:10 19:14:36-07:00
Format                          : application/pdf
Title                           : Microsoft Word - User manual.docx
Creator                         : baclks77
Document ID                     : uuid:dac46465-df79-43a4-ba31-5c6f61116566
Instance ID                     : uuid:b38c56ce-2d16-4571-b181-84cf35cc3627
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AGOF-RC344A

Navigation menu