HES EEV 9500 Series Compliance Sustainability NFPA 80 07

User Manual: HES HES 9500 Series Compliance Sustainability Product Guide

Open the PDF directly: View PDF .
Page Count: 5

This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its

Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no

liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage

occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its

entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or

service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to

the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an

Intertek certification program.

1

REPORT NUMBER: 318773MID-003

ORIGINAL ISSUE DATE: August 28, 2009

REVISION AND DATE: Original

EVALUATION CENTER

Intertek

8431 Murphy Drive

Middleton, WI 53562

RENDERED TO

Hanchett Entry Systems, Inc.

22630 N. 17

th

Ave.

Phoenix, AZ 85027

PRODUCT EVALUATED: Model 9500 electric strike

EVALUATION PROPERTY: Fire Resistance

Engineering Evaluation of Hanchett Model 9500 Electric Strike for compliance

with the applicable requirements of the following criteria: NFPA 80-07 Standard

for Fire Doors and Other Opening Protectives

ENGINEERING EVALUATION

Hanchett Entry Systems, Inc. August, 28, 2009

Report Number: 3187773MID-003 Page 2 of 7

1 Table of Contents

1 Table of Contents .................................................................................................................................2

2 Introduction...........................................................................................................................................3

3 Product and Assembly Description ......................................................................................................3

3.1. Product and/or Assembly Description: ........................................................................................3

3.2. Product and/or Assembly Certification: .......................................................................................4

4 Reference Documents..........................................................................................................................4

5 Evaluation Method................................................................................................................................4

6 Conclusion............................................................................................................................................5

7

APPENDIX

................................................................................................................................ 6

8 LAST PAGE & REVISION SUMMARY ................................................................................................7

Hanchett Entry Systems, Inc. August, 28, 2009

Report Number: 3187773MID-003 Page 3 of 7

2 Introduction

Intertek is conducting an engineering evaluation for Hanchett Entry Systems, Inc. on Model 9500 Electric

Strike, to evaluate Fire Resistance. The evaluation is being conducted to determine if use in assembly to

protect openings against the spread of fire and smoke will comply with NFPA 80-07 “Standard for Fire

Doors and Other Opening Portectives.

3 Product and Assembly Description

3.1. Product Description:

The 9500 series is a surface mounted electric strike with all components completely encased

within its ¾" thick stainless steel housing. The strike is surface applied requiring no cuts to the

door jamb. It is designed for use with rim exit devices. The 9500 series is field selectable to either

fail secure or fail safe operable with either 12 or 24 Volts DC. The product is certified for use in

90 minute locations with specific exit devices. See Product Information and Installation

instructions in Appendix.

Hanchett Entry Systems, Inc. August, 28, 2009

Report Number: 3187773MID-003 Page 4 of 7

3.2. Product Certification:

Hanchett Model 9500 Electric Strike is an Intertek Listed product for compliance with applicable

requirements of the following standards: NFPA 252 (1995) UL 10C (1998) and UBC7-2 (1997).

Model 9500 Electric Strikes (with or without pins) Listed use is for installation in up to 90 minute

fire rated 16 gauge steel frames within the frame manufacturer’s limitations. Limitations of the

Listing include the qualification that the strike must be used in conjunction with a Sargent Model

12-8810 exit device or a Yale model 7100F series rim exit device.

Authorities Having Jurisdiction (AHJ) should be consulted in all cases as to the particular requirements

covering the installation and use of Intertek certified products, equipment, systems, devices and

materials. The AHJ should be consulted before construction. Fire resistance assemblies and products are

developed by the design submitter and have been investigated by Intertek for compliance with specific

requirements. The published information (product and design listings) cannot always address every

construction nuance encountered in the field. When field issues arise, it is recommended the first contact

for assistance be the technical service staff provided by the product manufacturer noted for the design.

Users of fire resistance assemblies are advised to consult the test standard referenced for each Intertek

certified product. The test standard includes specifics concerning alternate materials and alternate

methods of construction. Only products which bear Intertek's Mark are considered as certified. The

appearance of a company's name or product in Intertek Directory of Listed Building Products does not in

itself assure that products so identified have been manufactured under Intertek's Follow-Up Service. Only

those products bearing the Intertek Mark should be considered to be Listed and covered under Intertek's

Follow-Up Service. Always verify the Mark on the product before using it.

4 Reference Documents

As part of this evaluation, Intertek has directly or indirectly used the following referenced documents:

 Intertek Listing report of listed product “Model 9500 Electric Strike (9731)

 NFPA 80 (2007) “Standard for Fire Doors and Other Opening Protectives”

 HES Product Information Data Sheet Model 9500

 HES 9500/9600 Installation Instructions

 One Sample of Model 9500 Strike supplied by Hanchett Entry Systems, Inc.

 Test Report 3073304

5 Evaluation Method

This evaluation is being conducted solely for the above italicized referenced project or use or both. Due to

the variables that exist from project to project and the fact that each evaluation requires review of the

most current existing data and information, this evaluation is not to be used as justification for any other

opinion nor used for any other project, without the express written consent of Intertek. This report should

serve as Intertek’s opinion regarding the use of the certified product in the conditions described herein.

The materials used on the project, which are applied in compliance with Intertek Design Listings, must

bear the Intertek listing mark. All certified products must be installed in accordance with the details

contained in Intertek's Directory of Listed Building Products.

The product assembly and use was evaluated against any requirements that may exist in NFPA 80 that

would make the use of HES Model 9500 Strike non-compliant with NFPA 80.