HHC Changzhou CB11HHC007 Control Box User Manual CB11B Control Box Instructions

Download:
Mirror Download [FCC.gov]
Document ID	3262387
Application ID	bYYr5UAX7IHmib2eiR7dyA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.98kB (199714 bits)
Date Submitted	2017-01-17 00:00:00
Date Available	2017-01-17 00:00:00
Creation Date	2017-12-21 00:27:22
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-21 00:27:22
Document Title	Microsoft Word - CB11B Control Box Instructions
Document Creator	PScript5.dll Version 5.2.2
Document Author:	sunny.zhou

CB11B Control Box Instructions
1. Product Overview
Product Name：
Control Box
Product Model No.： CB11B
FCC ID:
2AEQWCB11HHC007
2. Environment requirement
Operation temperature: +10℃~ +40℃.
Storage temperature:
10℃~65℃.
Operating Humidity：10%~80%RH non‐condensing.
Storage Humidity：10%~ 85%RH non‐condensing.
3. Directions for Operation
To use the control box, the switch power supply must be connected as the control box power
supply. The CH10 remote control must also be paired to be used. Detailed usage for each port is
as follows:
Before use, the CH10 remote control and CB11B control box must be paired:
1/3
SYNC Cord
Connection
Head Motor Port
APP Port
Foot Motor Port
LED Connection
USB Connection
Power Input
connection
4. The port is introduced
4.1
HD Motor ：Connects to the Head motor, and lifts/lowers head section.
4.2
FT Motor ：Connects to the Foot motor, and lifts/lowers foot section.
4.4
Power ：Connects to the power supply box, controls power supply.
4.5
APP ：Connect the app device.
4.6
LED ：Connects with lights.
4.7
SYN ：Same steps. Connect another control box, and two control boxes will synchronize
5. Matters needing attention：
5.1 The function will only work normally in proper working power conditions.
5.2 Control box input voltage must be less than 29.2VDC.
5.3 The CH10 remote control is needed for proper control.
5.4 If problems are identified, they must be treated by professional personnel.
6. Additional attention for user：
6.1 This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
2/3
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
6.2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
6.3 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co‐located or operating in conjunction with any other antenna
or transmitter.
6.4 For Intentional and unintentional radiators the manual shall caution the user that changes
or modifications not expressly approved by the party responsible for compliance could void the
users authority to operate the equipment
3/3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f07a7bec-a205-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:16 05:41:18Z
Create Date                     : 2017:07:16 05:41:18Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:f07a7bec-a205-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools