HID Global 1050 Prox Programmer 1050A (1050-300) User Manual 1050 904RevA TOC

HID Global Corporation Prox Programmer 1050A (1050-300) 1050 904RevA TOC

Users Manual 1050 904 manual

HID ProxProgrammerOperation Manual - 1050-904 Rev AHID Corporation9292 Jeronimo RoadIrvine, CA 92618-1905 USA949-598-1600800-237-7769Fax: 949-598-1690e-mail: www.prox.com
HID ProxProgrammer Operation Manual 1050-904 Rev AIntroduction .............................................................................................. 1 Operational Requirements .................................................................................... 1 HID ProxProgrammer System Description ......................................................... 1 System Equipment List ......................................................................................... 1Setting up the HID ProxProgrammer System........................................ 2 Hardware Setup..................................................................................................... 2 Software Setup ....................................................................................................... 2 Customer Configuration ....................................................................................... 3Getting Started ......................................................................................... 4 Starting HID ProxProgrammer Software ............................................................ 4 Selecting a COM Port............................................................................................ 5 Using the ICC (Intelligent Control Card) ............................................................ 6 Main Menu - Prox Programmer Software........................................................... 7 File Menu.............................................................................................................................. 7 Card Order Operation Menu .............................................................................................. 7 Card Order Report Menu.................................................................................................... 7 Programmer Options Menu................................................................................................. 7Programming............................................................................................ 7 Creating a New Order ........................................................................................... 8 Programming a Card Order ................................................................................. 8Printing ................................................................................................... 10 Printing tags ........................................................................................................ 10 Layout ................................................................................................................. 12 Manipulate placement of tag number and prefic.............................................................. 12 Change the font size of the tag number and prefix ............................................................ 12 Change the printer settings................................................................................................. 13Read Tags ............................................................................................... 13Table of Contents i
HID ProxProgrammer Operation Manual 1050-904 Rev AFallout Replacement............................................................................... 14Card Order Reports............................................................................... 15 Cross Reference List............................................................................................ 15ProxProgrammer Option....................................................................... 16 Select a Format.................................................................................................... 16 Present an ICC..................................................................................................... 17Troubleshooting...................................................................................... 18 Troubleshooting COM port selection................................................................. 18 Troubleshooting the ICC..................................................................................... 18 CD to floppy ......................................................................................................... 18Table of ContentsCopyrightThis manual is copyrighted by HID Corporation with all rights reserved. Under the copyright laws, this manualmay not be reproduced in any form, in whole or part, without the prior written consent of HID Corporation.DisclaimerHID Corporation has reviewed this manual thoroughly to make it an easy to use guide to yourProxProgrammer. All statements, technical information, and recommendations in this manual or relateddocuments are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted,and they are not intended to be, nor should they be understood to be, representations or warrantiesconcerning the products described.If you have any questions regarding your ProxProgrammer contact Customer Service @ 1-800-237-PROX(7769) ii
Page 1HID ProxProgrammer Operation Manual 1050-904 Rev AIntroductionHardware*HID ProxProgrammer (model # 1050AGN00) w/attached DB9 Serial Cable*Power Supply (12v 500mA)*ICC Intelligent Control CardSoftware*HID ProxProgrammer PC software*Customer Specific disk* IBM1 compatible Personal Computer with a Windows 952 or NT3 operating system.* The selected serial port must be available for exclusive use by the HID FieldProgrammer software.Operational RequirementsSystem Equipment ListHID ProxProgrammer System DescriptionThe HID ProxProgramming system is a contactless card and key tag programmer.The ICC (Intelligent Control Card) contains the security and customer formats. This card will activate theprogrammer and allow the system to be used. Without the ICC, the HID Field Programmer will notfunction.By using the HID ProxProgrammer PC software, the user is able to program and verify programmable HIDcard and key tag products.The software also allows HID proximity cards to be numbered (printed) using a Windows printer designedfor PVC card printing. System Reports can be printed on any standard Windows printer.1 IBM is a registered trademark of International Business Machines2 Windows 95 is a registered trademark of Microsoft Corporation3 Windows NT is a registered trademark of Microsoft Corporation
Page 2HID ProxProgrammer Operation Manual 1050-904 Rev ASetting up the HID ProxProgrammer SystemHardware Setup1. After unpacking, check to make sure that you have all of the equipment listed in the System Equipment List on page 1. Make sure your PC is off.2. Connect the HID ProxProgrammer DB9 cable to the selected Serial Port on the target PC. (The HID Field Programmer software uses COM1 as a default setting.) To change the COM portsetting, refer to the section: Selecting a COM Port, pg. 5.3. Connect the power supply to the HID ProxProgrammer. The power jack is located on the back ofthe HID ProxProgrammer.4. When you plug the power supply into the wall, you will hear a single Beep that indicates the HIDField Programmer is on. The LED on the front of the unit will flash green once then turn red andremain on after the power is supplied to the unit.5. Boot up your PC.Software Setup1. Insert the HID ProxProgrammer Install CD into the disk drive. From the CD directory copy theNETSETUP folder to your desktop.2. Open the NETSETUP folder. Execute the SETUP.EXE program. This will begin the installation.3. Setup will initialize, ask a few questions, and then complete the setup. A program group entitledHID will be created and accessible from the START menu.4. After the programmer software is successfully installed, proceed to the Customer Configuration.Customer Configuration.Introduction
Page 3HID ProxProgrammer Operation Manual 1050-904 Rev ACustomer ConfigurationThe HID Field Programmer software system is customized for each customer. The system file sysdb.syscontains validation keys for each specific customer and their HID Field Programmer hardware. OnceCustomer Specifics have been installed, the programmer and the software system should be ready to go.IMPORTANT NOTE :Be sure to make a backup of the following files:ICCDB.SYSSYSDB.SYSIf your system crashes, you will need these files to restore your customer card format information.Introduction1. Insert the HID Field Programmer Customer Specific Floppy into the disk drive. At the Startmenu select RUN and type A:\ Install.bat.2. The batch file assumes that the target system hard drive is C:. If the assumption is incorrect, edit thebatch file, Install.bat and replace the C: with the appropriate designator before executing the batchfile.3. The DOS shell that executes the batch file will indicate that files have been copied.4. Close the DOS shell. The software has been successfully installed.
Page 4HID ProxProgrammer Operation Manual 1050-904 Rev AGetting Started1. On the Start Menu, locate and highlight the Program group HID. Click on the HID ProxProgrammericon. This will launch the program.2. Once the program is launched a COM Port selection screen will appear. If your HIDProxProgrammer is attached to the default COM Port (1) and it is plugged in, press OK to continue.3. If the program does not detect the HID ProxProgrammer in the default COM port 1, you will receivean error message. Press OK.4. If you are not using the default settings, you must a select a different COM Port.Starting HID ProxProgrammer Software
Page 5HID ProxProgrammer Operation Manual 1050-904 Rev A1. When selecting a COM Port screen appears, click on the COM port where you have the HID FieldProgrammer attached.2. Once you have selected the correct COM port, the bar at the top of the dialogue box will indicatethat the COM port is available.3. If the program indicates that no COM port is available, refer to Troubleshooting COM portselection on page 18. Click OK. The programmer will beep once if it is properly connected andcommunicating with the COM port .4. After the HID ProxProgrammer is initialized, you will be prompted to present the ICC (IntelligentControl Card).Getting StartedSelecting a COM Port
Page 6HID ProxProgrammer Operation Manual 1050-904 Rev AGetting Started1. When the program prompts you to present the ICC, place the ICC directly on the programmer andpress OK. This will unlock the card formats. If you do not present the ICC, the programmer andrelated software will not function.2. If an error message appears indicating a problem with the ICC, refer to Troubleshooting the ICCon page 18. Click OK.3. If the ICC is functioning correctly, the programmer will beep once and the Main Menu will appearat the top of the screen.Using the ICC (Intelligent Control Card)
Page 7HID ProxProgrammer Operation Manual 1050-904 Rev AMain Menu - ProxProgrammer SoftwareThere are four menus on the Main screen of HID ProxProgrammer. All program functions can be accessedthrough these menus. File Menu - The only option under this menu is Exit. To quit the HID ProxProgrammer softwareselect exit under this menu.Card Order Operation Menu - This menu provides access to all the main functions of the ProxProgrammer software.Card Order Report Menu - This menu has one selection. Use this menu to create a Cross ReferenceList for an order.Programmer Options Menu - This menu has two options. Access this menu to select a Card Formator to present an ICC.Programming
Page 8HID ProxProgrammer Operation Manual 1050-904 Rev AProgramming1. Under the Card Order Operations Menu, highlight Card Order and New on the submenu.2. A card data form appears. After you enter a valid order number additional boxes will appear. Fill inthe boxes with the appropriate information. Click SAVE when the form is complete.Creating a New Order1. Once the parameters of an order have been specified, you can begin programming tags for thatorder.2. Under the Card Order Operations Menu, highlight Program Tags.3. You must select the Order # that you want to program from the drop down menu of order #'s. (Clickon the down arrow)4. The current format type is displayed below the Card Order #. If a format error message is returnedafter the order number is selected, you will need to select a different format.5. Select the Programmer Options menu and highlight Select a Format.Programming a Card OrderNOTE :If you will be using a card printer, you may find it more convenient to print numbers on your cards beforeprogramming. For Printing Instructions, see page 10.
Page 9HID ProxProgrammer Operation Manual 1050-904 Rev A6. Choose the desired format from the list of formats available.7. After the desired format is selected, return to the programming screen and select the Order # toprogram.To switch tomanual advance,press theAdvance button.The message inthe title bar willindicate how it isset.You can now printwhile in theprogrammingscreen. For moreinformation onPrinting, refer tothe sectionPrinting Tags onpage 10.8. Once you select the Order #, position a tag on the programmer. Use the tag with the # specified inthe dialogue box. Click the PROGRAM button. The programmer will beep once, if it is successful.The counter on the screen will advance and prompt you to place the next tag in the sequence on theprogrammer.9. The Programmer is set to automatically advance to the next tag in the programming sequence. Ifyou want to manually advance to the next tag, first change to Manual Advance mode by clickingon the ADVANCE button. (The message in the header of the screen will now read: ManualAdvance.) Then press the NEXT TAG button to advance to the next tag in the sequence.WARNING: When in Manual Advance, if you forget to press NEXT TAG, you will program thesame card number again.Programming
Page 10HID ProxProgrammer Operation Manual 1050-904 Rev APrinting10. If you receive an error message, it may indicate that the tag you are attempting to program hasalready been programmed or there is no tag present to program. If the tag has not been previouslyprogrammed, it may mean the tag is damaged and therefore unusable.11. You can present a different tag and click the RETRY button or you can choose to SKIP the tag. Ifyou skip the tag, you can program it later by choosing the Card Order Operations Menu/ ProgramTags. The program will locate the tags that were skipped and prompt you to program only thosetags.12. You can also print in the programming screen.Tag Orders can now be printed to your system's default printer. Be sure to change your card printer soit is designated as the system default printer.1. Select the Card Order Operations menu and highlight PRINT TAG.2. Select the Order # by pressing the down arrow and highlighting the desired order. If a format errormessage is returned after the order # is selected, you will need to select a different format.3. Select the Programmer Options menu and highlight Select a Format.4. Choose the desired format from the list of formats available.Printing tags
Page 11HID ProxProgrammer Operation Manual 1050-904 Rev A5. After the desired format is selected, return to the programming screen and select the Order # toprint.6. The Status box will indicate which tag to submit to the printer. If the message in the title barindicates that the program is set the Automatic Advance, the status dialog will automatically moveto the next tag in the sequence. If you want the program to advance manually, first change toManual Advance by clicking the ADVANCE button. (Be sure the title bar indicates ManualAdvance.) Then press the NEXT TAG button to move to the next tag in the sequence.WARNING: When in Manual Advance, if you forget to press NEXT TAG, you will program thesame card number again.4. The PREVIEW button will display the printer output without printing it.5. By pressing the PREFIX button, you can modify the text that appears before the number on the tag.The title barindicateswhether theprogram is setto Automaticor ManualAdvance.Printing
Page 12HID ProxProgrammer Operation Manual 1050-904 Rev APrintingLayoutIn the Print Tag screen, press the LAYOUT button. Selecting this option will allow you to changethe printer output. In the layout screen you can:1. Manipulate placement of the tag number and prefix.2. Change the font size of the tag number and prefix.3. Change the printer settings.Manipulate placement of the tag number and prefix1. Using the mouse, click once to select "Tagnumber" or "Prefix".2. Drag it to a new position on the layout grid.Change the font size of the tag number and prefix1. Select the "Tagnumber" or "Prefix" by clicking on it once.2. From the FORMAT menu, select FONT.3. Choose the desired font type and size. Press OK.
Page 13HID ProxProgrammer Operation Manual 1050-904 Rev AChange the printer settings1. In the Layout screen, right-click the mouse button.2. Select the PRINT option. Now select the PRINT SETUP option. This will allow you tochange the orientation of the tag number from portrait to landscape or to select another printer.Press OK.To exit the Layout screen, click the X box in the upper right corner of the layout window. Theprogram will prompt you to confirm the saved changes. Answer YES if you want to save thechanges and NO if you do not want to save the changes.IMPORTANT NOTE: If any errors are made while using the layout designer or anyundesirable changes have been made, simply say NO to the Save Changes prompt whenexiting the Layout screen.The Report Menu is not utilized by HID ProxProgrammer Software.Read Tags1. After you have programmed the tags in an order, you can verify the tag information by selectingRead Tags from the Card Order Operations menu.2. The current Format type is displayed in the top part of the screen. To change the format type, pressthe FORMAT LIST button. The Format selection screen will open. Select the desired format fromthe list and click OK.Read Tags
Page 14HID ProxProgrammer Operation Manual 1050-904 Rev A3. Once the desired format is selected, place the tag on the HID Field Programmer and press theREAD TAG button. If the tag is supported by the selected format, information about the tag will bedisplayed in the dialogue box. If the tag is not supported by the selected format, a Read Errormessage will be returned. This can indicate that the tag is damaged or the incorrect format has beenselected.4. To read additional tags place a new tag on the programmer and press the READ TAG button.Fallout Replacement1. To replace a lost or damaged card in an order select the Card Order Operations menu andhighlight Fallout Replacement.2. Select the Order # from the drop down menu. If a format error message is returned after the ordernumber is selected, you will need to select a different format.3. Select the Programmer Options menu and highlight Select a Format.4. Choose the desired format from the list of formats available.5. After the desired format is selected, return to the Fallout Replacement screen and select the Order #.6. Enter in the appropriate box the externally marked tag number to be replaced.Fallout ReplacementFallout is described as any tags in an order that fail to meet any customer standard for any reason.Example: Tags that fail to read at proper distance or those that have cosmetic defects and need to bereplaced in the order. This option is generally used after an order has been programmed.
Page 15HID ProxProgrammer Operation Manual 1050-904 Rev A7. Place a new tag on the HID Field Programmer. Click the PROGRAM button. A message willindicate that the tag was successfully programmed.8. If you input an external number that is not in the order, a Card Order Data Error will be returned.Be sure to select a valid external number before programming the fallout replacement.Card Order ReportsCard Order Reports1. Select the Card Order Reports menu and highlight Cross Reference List.2. You will be prompted to select an Order #. Click the down arrow to activate the pull down menu.Select the desired Order #. You will have the option of previewing or printing this report.3. The Cross Reference Report will display the tag #, card # and status (programmed orunprogrammed) of each tag in the order.Cross Reference List
Page 16HID ProxProgrammer Operation Manual 1050-904 Rev AProxProgrammer Option4. To print the report, close the preview, select PRINTER and press OK. This will send the report toyour system's default printer. To close the report, press the X box in the upper right corner of thereport screen.1. When using more than one tag format with the HID ProxProgrammer, switch to another format byselecting the Programmer Options menu and highlighting Select a format.2. The Format List screen will display all the available formats that are installed with yourprogrammer.ProxProgrammer OptionsSelect a Format
Page 17HID ProxProgrammer Operation Manual 1050-904 Rev A3. Using the mouse, highlight the desired format from the list and press OK.Present an ICCTo add additional formats to the HID Field Programmer system, a new ICC must be presented.1. Select the Programmer Options menu and highlight Present an ICC.2. When the program prompts you to present the ICC, place the ICC directly on the programmer andpress OK. This will unlock the new format. The new format will now be available on the FormatList.ProxProgrammer Options
Page 18HID ProxProgrammer Operation Manual 1050-904 Rev ATroubleshootingTroubleshootingTroubleshooting COM port selectionIf the program indicates there are no COM ports available, contact your network administrator.Troubleshooting the ICCIf an error message appears after you present the ICC:1. Be sure the HID ProxProgrammer Customer Specific disk has been installed. Refer to page 2for installation directions.2. If the Customer Specific disk has been installed, the ICC may be damaged. Contact TechnicalSupport for information on a replacement ICC. 1-800-237-PROX.NOTE: Remember to make a backup copy of the ICCDB.SYS file. If your computer crashes,you will need this file to replace the customer specific information after reinstalling the HIDField Programmer Software.CD to floppyIf you would like to create a set of floppy disks from the CD:1. From the CD directory DISTRIB\DISK144, copy the contents of each directory (DISK1through DISK6) to an appropriately labeled 3-1/2 inch 1.44 megabyte floppy.2. You can now use this set of floppies to install the HID ProxProgrammer Software.

Navigation menu