HID Global 53XX Proximity Reader User Manual 51967

Download:
Mirror Download [FCC.gov]
Document ID	51967
Application ID	PLNSUjd4okGjulLTNsDE/A==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.54kB (219209 bits)
Date Submitted	1999-08-05 00:00:00
Date Available	1998-07-28 00:00:00
Creation Date	2001-05-26 13:34:49
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-26 13:34:54
Document Title	51967.pdf
Document Author:	jsoscia

@K<@__
EXHIBIT E
SYSTEM MANUAL
5473A CLOUDS REST ‘ MARIPOSA, CALIFORNIA 95338 ' (209) 96645240 ' FAX (209) 966-4257
Thin Line II Reader Installation Manual
Installation Requirements
The following instructions will explain the installation procedure
for the Thin Line II Reader. The instructions include these sec-
tions.
Mounting Instructions
Connecting the Reader to the Host
Testing 3. Operation of the Thin Line II Reader
Mflnciudfii
1) Thin Line il
2) die-32 x 1" self tapping, Type T or 23
3) Installation Sheet
Parts Recommended (not Included)
1) Wire Splice
2) Grommet
3) Dc Power Supply 4.75 to 1GVDG, 50mA
4) Cable, 10 conductor , 22 AWG
Mounting Instructions
1. Determine an appropriate mounting position forthe Reader.
2. Drill two 7/64lh L109) Inch
holes for mounting the Reader
to the surface.
01
Figure 1
Connecting the Reader to the Host
The Thin Line iI is available with an 18“ Pigtail with a 10 conductor
cable and a 10 conductor terminal strip.
a. Pigtail - Prepare the new cable by cutting the cable
jacket back MM" and strip the wires ‘/.'i
b Splice the cable and the pigtail together and seal
the splice it the Thin Line will be an Outdoor unit. Trim
and cover all conductors that are not used.
6. Terminal Strip - Loosen the terminal strip screws
until the lap oi the screw is flush with the badr surtace at
the Reader. Be careiul not turn them further; they
are not captive and will fall out.
or Prepare the new cable by cutting the cable Jacket
back 1-1/4 inches and strip the wire V4 ". Twist the
ends of the wires to eliminate stray strands.
e. Form each Wire into a hook and install each Wire by
wrapping it around the screw.
the hole.
recommended.
3. Drill a 3/8 to 1.0 Inch hole for the
cable. If you are mounting on metal
place a grommet around the edge of
4. Route the interface cable from the
Reader and/or power supply to the
Host. Linear type power supply is
Power Requirements
VVVVVVV
Check all electrical codes for proper
cable installation
Mount the Reader with the screws
provided when mounting onto metal
mulllons orjunction boxes. On other
materials use appropriate fasteners.
Important Product Specifications
Power supply
Operating Voltage Range (430)
Absolute Maximum (inc non-operating)
Maximum Averago Current svnzv
Peak Current svnzv (maximum)
Peak Current 5Vl12V (typical non-metallic mounting)
Peak Current svmzv (typical mounted on metal)
Linear type recommended
4.75VDC -16.0VDC
i 8.0VDC
AnnwsomA
(50le mm
SOmA/loomA
GUnW120mA
Operating Parameters
Maximum Cable Distance to Host
500 feet (152 meters)
_________—_—______—.__.
HID Corporation 9292 Jeranimo Road lrvine, CA 92618 USA TEL (714) 598-1600 (500) 237-7769 FAX (714) 598-1690
Web page, E-mail - www.prbx.com Thin Line ll Reader installation Manuel 5395-902 Rev C
1072
Connect the Reader to the Host according to this wiring diagram and the Host installation guide.
The legend for wiring is color coded according to
the “Wiegand Standard“ for the recommended cable.
The numbering for the terminals is shown on the
,Ti back label and in Figure 2
Color
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:05:26 13:34:49
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : jsoscia
Title                           : 51967.pdf
Modify Date                     : 2001:05:26 13:34:54-04:00
Page Count                      : 6

EXIF Metadata provided by EXIF.tools