HID Global OK5422 RFID Reader User Manual User guide

Download:
Mirror Download [FCC.gov]
Document ID	3391125
Application ID	FltM00ivF7FcrhEy7moc9w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.76kB (297015 bits)
Date Submitted	2017-05-15 00:00:00
Date Available	2017-05-15 00:00:00
Creation Date	2017-03-01 10:43:54
Producing Software	Acrobat Distiller 10.1.16 (Windows)
Document Lastmod	2017-03-01 10:43:54
Document Title	Microsoft Word - User guide
Document Creator	PScript5.dll Version 5.2.2
Document Author:	rcresswell

eBase Models
1021, 3021, 3121, 5021,
5022, 5023, 5025, 5027,
5127, 5421, 5422, 5427, 6121
Drivers and Manuals: www.hidglobal.com/omnikey
Americas andCorporate
611 Center Ridge Drive
Austin, TX 78753
USA
Installation Guide
© 2010-2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document
may not be reproduced, disseminated or republished in any form without the prior written
permission of HID Global Corporation. HID Global, HID, the HID logo, iCLASS SE, OMNIKEY,
and Seos are the trademarks or registered trademarks of HID Global Corporation, or its
licensors, in the U.S. and other countries.
Asia Pacific
19/F 625 King’s Road
North Point, Island East
Hong Kong
Europe, Middle East and Africa
Phoenix Road
Haverhill, Suffolk CB9 7AE
England
www.hidglobal.com/support
Introduction
Specifications and Installation
1021 USB - Desktop smart card reader in a small form factor
for desktop and mobile usage.
For driver setup, consult the OMNIKEY Smart Card User Guide.
This guide describes physical behaviour and conformities of
the OMNIKEY Smart Card Readers.
3021 USB - High-performance smart card reader, with a
USB interface and small form factor for desktop and mobile
usage.
3121 USB - High-performance smart card reader for desktop
use with multiple standing base options in a robust housing.
5021 USB - Contactless Reader with USB interface for
desktop use that reads/writes to 13.56 MHz smart cards.
5022 USB - Contactless Reader with USB CCID-compliant
interface for desktop use that reads/writes to 13.56 MHz
smart cards.
For further information, contact HID support:
www.hidglobal.com/support.
CAUTION: Install the drivers prior to attaching the
OMNIKEY reader with the computer.
ATTENTON: Vous devez installer le driver avant de
connecter le lecteur OMNIKEY à l’ordinateur.
USB Connected Reader Specifications
Operating Temperature
32° to 131° F / 0° to 55° C
PC Connector Cable
59.1 in/150 cm – Models 1021, 3021, 3121,
5022, 5023, 5027, 5422
78.7 in/200 cm – Models 5021, 5025 CL,
5421, 5427 CK
70.9 in/180 cm – Other Models
Mean Time Between
Failures (MTBF)
500,000 Hours
Host Interface
USB 2.0 CCID (USB 1.1 Compatible)
Host Data
Transmission Speed
12 Mbps (USB 2.0 Full Speed)
Power Supply
Bus Powered
5023 USB - A 5022 Reader with iCLASS and Seos support.
5027 USB - A 5023 Reader with Keyboard wedge.
5025 CL USB - Contactless Reader with USB CCIDcompliant interface for desktop use that reads contactless
(125 kHz) Prox cards.
5127 / 5427 CK/ 5427 UE USB - Contactless
13.56MHz/125kHz reader with CCID/Keyboard wedge
interface.
5421 / 5422 USB - Dual interface PC-linked reader that
reads/writes to 13.56 MHz contactless cards and virtually
any contact smart card. 5422 includes CCID.
6121 Mobile USB - Dongle-sized smart card reader for SIMsized smart cards, especially well suited for use with mobile
devices.
Parts
• Smart Card Reader
• Installation Guide
Find drivers, reader documentation supporting various
operating systems at:
www.hidglobal.com/omnikey
See the application note for card loading and handling
instructions at: www.hidglobal.com/omnikey
USB Connected Reader Installation
1. Connect the reader with computer; plug the USB
connector into your computer’s USB port.
2. When the reader is operational, the LED illuminates.
3. For contactless operation, hold the card next to the
reader logo. For contact smart cards, insert the card into
the reader with contacts facing up.
4. When the reader is exchanging data with a card (reading/
writing), the LED blinks.
Regulatory
CE Marking (All Readers)
CAUTION: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
HID Global hereby declares that these proximity readers are in compliance
with the essential requirements and other relevant provisions of Directive
2006/95/EC.
ATTENTION: Tout changement ou modification de cet appareil sans
approbation explicite du manufacturer vous enlève les droits d’usage de cet
équipement.
Por el presente, HID Global declara que estos lectores de proximidad
cumplen con los requisitos esenciales y otras disposiciones relevantes de la
Directiva 2006/95/EC.
FCC (All Readers)
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Product Radio Certifications
The OMNIKEY 5022 CL and 5127CK MINI Module were tested under the FCC
rules and Industry Canada rules for a Modular Approval and therefore the
following shall apply: (reference below FCC/IC IDs)
• Provided that the Antenna and tuning network have not been changed
in any way, the Final Product label may contain the HIID Global FCC ID.
Provided no other radio devices exist within the final assembly. The end
integrator may use these ID’s, as long at the original HID Global Label is
visible.
• FCC ID: JQ6-OK5022CL or IC ID: 2236B-OK5022CL
HID Global déclare par la présente que ces lecteurs à proximité sont
conformes aux exigences essentielles et aux autres stipulations pertinentes
de la Directive 2006/95/EC.
A HID Global, por meio deste, declara que estes leitores de proximidade
estão em conformidade com as exigências essenciais e outras condições da
diretiva 2006/95/EC.
HID Global bestätigt hiermit, dass die Leser die wesentlichen Anforderungen
und anderen relevanten Bestimmungen der Richtlinie 2006/95/EC erfüllen.
HID Global dichiara che i lettori di prossimità sono conformi ai requisiti
essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea
2006/95/EC.
Download the R&TTE Declaration of Conformity (DoC) at:
http://www.hidglobal.com/certifications
Brazil (Readers 5022, 5023, 5422 and 5427G 2)
• FCC ID: JQ6-OK5127CKMINI or IC ID: 2236B-OK5127CKMINI
“Este equipamento opera em caráter
secundário, isto é, não tem direito a proteção
contra interferência prejudicial, mesmo de
estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter
primário”
• The End User/Manufacturer, will not need to repeat the intentional
emissions testing (actual radio certification), however the un-intentional
emissions testing will need to meet the FCC and IC requirements with the
module installed into the final assembly or product. This also applies to CE
Marking as defined by the R&TTE Directive.
• However, in many cases, the module may need to be retuned, due to the
effects of the product enclosure and assemblies within this enclosure, and
the de-tuning affect that this may have on the radio circuitry. In this case
and if other radios exist, Class 2 Permissive Change is required.
• In the event that the HID OEM modules Kit is modified in any way, the
radio transmitter operating at either 125 kHz, 13.56 MHz and Bluetooth,
when the module is integrated into the OEM’s final product, Radio
Certification is required for the final product.
Chile (Readers 5022 5422 and 5427G 2)
China (Readers 1021, 5022, 5422, 5427and
5427G 2)
Hong Kong (Readers 5022, 5023, 5422 & 5427G2)
• Obtain FCC Certification by submitting the final product to a
Telecommunications Certified Body (TCB) laboratory that performs the
testing and issue the FCC Grant. Standard: Part 15, Subpart C.
India (Readers 5022 5023,5422 & 5427G2)
• Often the same TCB tests to Canada requirements and grants certification
as a Certification Body (CB). Standard: RSS-210, RSS-GEN and RSS-310,
where applicable.
この装置は総務省の型式指定を受けています。 本製品は電波を使用したRFID機器の
読み取り・書き込み装置です。 そのため使用する用途・場所によっては、医療機器
に影響を与える恐れがあります。
• The same laboratory may also be an EU Communications Assessment
Body (CAB) that is accredited to test to R&TTE Directive requirements for
CE Marking. Applicable standards:
EN 300 330, EN 301 489-3, EN 50130-4, and IEC60950.
Japan MIC (Reader 4121)
Korean KC (Readers 1021, 3121, 4040, 4321, 5021,
5022, 5325, 5326, 5421,5422,5427, 5424G2,6121, 6221,6321)
• A laboratory that is a CAB testing to R&TTE Directive requirements will
also be testing to Australia and New Zealand requirements because of a
common test standard. Standard:
AS/NZS 4268.
항목
규격
항목
규격
송신주파수
RFID:13.56 MHz
전파형식
A1D
• Asian country certifications are obtained on an individual country basis.
수신주파수
RFID:13.56 MHz
발진방식
X-tal
출력
RFID: 10m에서 24.19mv이하
변조방식
AM
전원
DC 5
OEM Final Product US Dept. of Commerce Bureau of Industry and Security
(BIS) approval is required for USA based companies who export and reexport products using encryption.
Regulatory Compliance Assistance - HID Global provides technical assistance
and laboratory recommendations, as required.
CAUTION: Any changes or modifications to this devise not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
Canada Radio Certification (All Readers)
Mexico (Readers 5022,5023, 5422,5427G2)
Singapore (Reader 5427 CK)
Taiwan (Readers 5321 and 5421)
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功
率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現
有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作
業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干
擾。
Le present appareil est conforme aux CNR d’Industrie Canada applicable
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
meme si le brouillage est susceptible d’en compromettre le fonctionnement.
According to “Administrative Regulations on Low Power Radio Waves
Radiated Devices” Without permission granted by the NCC, any company,
enterprise, or user is not allowed to change frequency, enhance transmitting
power or alter original characteristic as well as performance to an approved
low power radio-frequency devices shall not influence aircraft security and
interfere legal communications; If found, the user shall cease operating
immediately until no interference is achieved. The said legal communications
means radio communications is operated in compliance with the
Telecommunications Act.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : rcresswell
Create Date                     : 2017:03:01 10:43:54-07:00
Modify Date                     : 2017:03:01 10:43:54-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : Microsoft Word - User guide
Creator                         : rcresswell
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Document ID                     : uuid:5c317678-adfc-4e57-9867-324ab54d222f
Instance ID                     : uuid:dd305876-87e8-4fbd-8c45-7cfe1d6ea51c
Page Count                      : 2

EXIF Metadata provided by EXIF.tools