HIT Commerical Robot X1 Robot Vacuum Cleaner User Manual
HIT Commerical Robot Co., Ltd Robot Vacuum Cleaner Users Manual
Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2998459 |
| Application ID | fPiSuUXexp3MPgq98OwLww== |
| Document Description | User Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 457.8kB (5722548 bits) |
| Date Submitted | 2016-05-20 00:00:00 |
| Date Available | 2016-05-20 00:00:00 |
| Creation Date | 2016-05-19 17:25:15 |
| Producing Software | pdfFactory Pro 5.20 (Windows XP Professional x86 Chinese) |
| Document Lastmod | 2016-05-19 17:25:28 |
| Document Title | Users Manual |
| Document Creator | pdfFactory Pro www.pdffactory.com |
| Document Author: | liubaoyang |
é EVERYBODY
Intelligent cleaning rnhnt @
USER MANUAL
0 Instructions for use shall be provided with the appliance so
that appliance can be used safely.
.The plug must be removed from the socket-outlet before
cleaning or maintaining the appliance.
.This appliance can be used by children aged from 8 years old
above and people with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
0 Children should be supervised to ensure that they do not play
with the appliance.
I Use only the power supply unit previded with the appliance.
OThis appliance is intended to be used in household only.
Co nte nts
1- Safety Instruclions ................. 24 5. Product Maintenance ............... 14 17
1.1 Notes 5.1 Daily Storage
1 2 Safety Precautions 5.2 Clean the Main Body
1.3 About Child Salely 5 3 Clean the Dust Box
1.4 About Battery 5.4 Clean the Filter
1.5 Use Flange 5.5 Clean the Main Brush
2. Product Composition. . 5.6 Clean the Side Brush
2.1 Main Body and Aoces 5.7 Clean the Front Wheel
22 Parts Introduction 5 8 Clean the Left Wheel and Flight Wheel
5.9 Clean the Sensors
5.10 Clean the Trailing Bar Assembly
3. Product Installation...
3.1 Main Body
32 Remote Control 6. Common Errors. . 18
3 3 Virtual Wall 6.1 Alarm and Prompt Facility
3.4 Charging Station 6.2 Troubleshooting
3.5 Installation ol APP -
4' Product Usage, 944 7. Technical Parameters .................. 19
4-1 Mal" BOUY 8. SWEEHOME APP
4.2 Remote Control Operation guide (Android) ______ 20-31
4.3 Space Isolator
4.4 Charging Station 9- SWEEHOME APP
4 5 Charging Methods Operation guide (IOS). . 82-43
.01.
Thank you for purchasing EVERYBODY X1 Intelligent
Cleaning Robot,wish you have a happy experience.
If you have any questions about this pro uct,please
call service h0tline:400-047-9995.
1,Safety Instructions;
1.1 Notes
Before usinglhe product. please observe the tulluwmg safety precautions.
‘ Read the user manual carelully, and use the product accurur ng to the instruction.
" Keep the user manual care-fully lortne lulure reference
" It you want to send the product to others. please send It along with the user manual.
' Any cparalian error may damage lhe product or cause aerluus personnel inlury.
1.2 Safety Precautions
A Only use the original adaplor. battery and charging station, or else it
will damage the machine and cause lire because ol electric shock
and high voltage.
fill you findlhal the rnain body and accesscrias are damaged. please du
not use the cleaner and contact the customer service department.
Anyone except anlhorlzed repair technician is not allowed to disassemble,
repair or remouid the machine.
Ana nut louch the puwersucket and the machine when your hands are
wet. or else it will cause electric shock
Am not use the machine in Ihe place without guard railing. or else it will
damage the machine and cause personal iniury.
.02.
ADO not bend the power cord overly or place heavy meals on il, or it may
cause power Cord damage‘ lire or eleclllc shock
ADO not approach any heal source or combustible malerlals such as (he
gasoline cleaner
A Do not iwisl your clclhes or any pail ol youi body (head. linger, elc.)
lnlu line brush a! wheel unhe machine, M Il may cause personal iniury
This product is only for Waler oil or olher liquid Belove using scallered Before using. please move
Indoor use. shall be prevented lrom elecll‘lc wires on the away all lraglle ubiecis
damaging the cleaner. ground shall be kept in
good aiderm ensure the
cleaner's work
Pniiusina place
mm“ mm:
em . ”
Please lake all the lwo lf you do not use lhe II the machlne is nor used The baller should be
prolecllve pieces helore machine. please lurn oil lor a long lime. please charged aboul 12H. ii lhe
uslng‘ inus Ihe cleaner ine power switch‘ or else charge ine banery iuliy, machlne is used lhe lirsi
can work well. It wlll damage the ballery. lhen lake |l oul and put ll lime or nol used for a long
in cool place. Keep the llme. The ballery should
bollom ol cleaner dry be used up belore
recharging al lilsl 3-4 llmes‘
which will make lne
ballely eliicienl.
Chm-"g slaiiun and Please pull out [he powei Do not cover Ihe slgnal
space lsulatur should he sockel ii me charging window of lhe charging
against the WE” and on a slaiion will be not used for station, or else lne
level plane, or else ihe a long lime Iurlcllun ol aulo-cllalglng
funcllorl wlll be influenced. will be invalld
.03.
1.3 About Child Safety 1.4 About Battery
itThe machine will only be used with the original battery. \
2. Please turn an the pawerswnch before taklrlg out the
battery
3.1m battery must be taken out belore abandoning the machine.
4. it you want to replace the batlery. please contact
am ailerrsaie depavtment it will lead to accident it wlorlg
battery IS put in the machine
5. it the battery is leaked, please do not touch the liquid,
you sneulu Wipe the liquid wttn dry cloth. and put the
battery to recycle em or maintenance paint, rm not lhrow
‘ The machine should not be
used alone by children.
' Forbid the children playing the
packing bag. or else it will cause
\smother.
ll at random
6 Please Blsposa ol the ole battery 01 the partslrem oteA
control and space isolator) pmpevly The battery includes
hazardaus substance please put it to recycle sile
according to local environmental protection
regulations. -
1.5 Use Range
Wood Floor
I Inapplicable Range,
Not suitable in the extremely hotor cold environment.
'The machine is anly used indoors.
'Du not use the machine in the place wrlhout guard railing. or else it wlli
damage the machine and cause personal iniury.
'Do nol use the machme lrl Ihe following sflvllunmeM‘
wel, lmlammabie, explosive or easily corrosive.
*Do not let the machine clean Ihe flaming cigarette butts, matches and
so on.
‘Do not let the machine suak the tonertrorn laser primerand copier, or
else it will cause ilre.
'Do not let the machine suck sharp objects. such as glass sheet, nails
and so on. or else It will damage the machine.
.04.
2. Product Composition
21 Main Body and Accessories
Remote Control Space lsolalor
‘1 *1 *1
Main Body
\ ”1
3i
,5,
Battery Trailing Bar Assembly MOP
q .1“. ‘1pc
w~ o
J m
—-4w.'9—~ —
Filter Side Brush Clean Brush User Manual
'2pcs ‘apcs '1pc ‘1
Screwdriver Adaptor
.1 .1
Q Tips:
‘ The remote control can be implemented by your smart phone or tablet PC.
“ The main body is equipped with a side brush and a filter. and the other two side brushes and iii
are put in the gift box
' The trailing bar assembly includes a mop that can be used directly.
.05.
2.2 Parts Introduction
Front View
Top Cover
n \ -'-' h-F"
Charging Electroddis 9””
Bottom View
From
Wheel
Ground
Detecflon
Sensors
Right Wheel ‘4»
Char in Jack
Trailing Bar Assembly
Dust Box Bulton
Banery Pack
Left Wheel
Trailing Bar
3.Product Installation
3.1 Main Body
Please install the battery before usin- the cleaner!
UHPW the nut when nressmtz
the snap |DlrI
1 Loosen the screw with screwdrlvello unlold the battery cover
2 Connecllott method: take out the connectors between the battery and cleaner. joln the two tetmlnals
with same color.
Drsassemhle snap yotrrt, unplug the pin when presslrlg the snap turnt.
3 Frrstty, put the wrre termlnat tongue and wlre lnto the battery pack gap accovdmg lo the top rrght lmage
Then put the battery mlo battery compartment Finally. close the battery covet and lock screw.
Caution :
JA Dangnrl Beam: shock
”’1
we?
I If you do not use the machlne. please turn oll the power swllch. or else rt wrll damage the battery
2, It the mash-he Is not used tor a long trme, please charge the battery lully. then take lt on! and put
ll in coal place keep the bottom ol cleaner dry
3 The barlery should be chatged about 12H. rt the maehme Is Used the lust trme at not used tor a long trme
When the battery rs used up belote reehargrng at llrst 3-A llmes‘ rr wrlt make the battery efllclent
a You should use the ohghtat ballsvy or else ll wlll cause damage and acctdent
3.2 Remote Control
t. Unlold the hattery wvel. 2 Ful two alkaltrle hattenes 3 Turn on the power swrtch afler trls|al|tng
(AAA) rnto the battery tar, the ballely, and check whether the remote
takrrrg care at the pusrtlve conllul can control the cleaner. It nul. please
and negatwe termrnals. match code agarh according Io page 10.
.07.
3.3 Virtual Wall
> Power
lndlmor
l1
1. Unfold trie battery 2. Put two alkaline 3 Turn on the power 4 Put lhe space isolator
caver. batterieer) into the switch, then the power on the flat lloor and
battery jar, taklng care at indicator wlll blink. agamst the wall.
the pasmve and negative
terminals
3.4 Charging Station
1- Pvt |he charging slalion on 2. Insert the adaptor into me 3. Dn riol cover the slgnal
lne llat floor and against tne wall, power socket sine. and anolriar Window or trre charging
Make sure no obstacles witniri side in the otiarging slatron station, or else the lunction
tne zone 0! 3m in the rent and or auto~charlging will be
0.5m on the right and lelt sides invalid
or the charglng elation,
3.5 Installation of APP
This smart home application can be operated by your smart phone or
tablet computer.
l.Thls application requires a smart phone or tablet computerwlth
android system above 2 2 version or I05 system above I085 version
2 Please make sure your smarI phone or tablet computer work normally.
3 Please download and install the APK or lPA by reverence (U the \‘
operation gulde ol SWEEHOME APP.
4. Once you have inealled this APP. you can rind the SWEEHOME EVER" HOD r
ioon in your application list ‘
5, Make sure the WlFl works narmally, and ma cleaner can realize the
immune or remote control and monitoring by referring to Ihe operation guide
or SWEEHOME APP,
QTips:
For details please see the chapter 8 and 9 in the operation gulde of SWEEHOME APP.
.08.
4. Product Usage
4.1 Main Body
4.1.1 Operation Button
Buttons' instructions
Power/Charging lndieazov
t. Indicatorlmll keep on when cleaner ls working.
2. IndicatorWlll be bllnkll’lg when cleaner is charging.
3 Indlcatur wlll keep on when cleaner lS tully charged.
\ 4 indlcator thl be 0" when cleaner IS low on power
Start/Stop button
g) In standby modepress the buttontne cleaner wlll
automatlcally smn cleaning al sel speed
Press Ihe butlon again. the Cleaner wlll slop cleanlng The
function wlll not be memonzed
4.1.2 Working Mode ;
Auto Cleanin
1 Make sure the battery power l5 enough 2 Turn on the power and press “start“ button
Turn on the power swilch, the power lndicaior "‘6 “93"“ W'” 5‘5" BU‘D'D‘Pal‘mg-F'WF "“5
W". Mngmsh afia, blmking (we m Stanmy button agaln. the cleanerwlll stop cleaning.
mode
Q Warm tips
1 Seltrrecharging and slowrfast cleaning mode need to be executed by remote control,
or connect the APP to smartphone or tablet to execute correspon ding working mode.
2 When the battery power ls low, the machlne WIII emlt the sound"dl dl'. the mlddle
brush will stop and seek the charging station automatically.
3. When you use the cleaner. please make sure the cleaner is in standby mode.
.09.
4.2 Remote Control
{—
M Scheduie Display
Day D piay Time/Code Dis ia
Dlspiay Screen Eiloi Dispiay
iaw
Full 60 Fast
Stan to Clean
ELMO" Avea
Power bulion W Monday
Enter button
Forward button
wr
Time setting button/Tuesday
w:
Sew-recharging builon/Wednesday
¥vA<>¥©
umm
Backwavd button “3;” Schedule setting button/Thursday
Left button FT“ Fast cieaning button/Friday
Right button ruffw Automatic cleaning bulion/Saiurday
s'rtms‘m Stan oy 510p cleaning/Sunday 4%,, Slow cleaning button/whole week
Noiezli the remote control doesn‘t workpiease check the baiter power." you cannot operate the
remnla mnlmi mm enough paws! piease redo Dacia match
Slaps to match code Firstly check whethei the cleaner and remote oommi has enough power, men
operate the cieener accovding to the ionowmg sieps:
A. Tum Dif the cleaner;
B. Hoid the button "OK' i
C Tum on the cleaner:
D. Afler hearing Ihe sound 'di m“, release the button “OK"
the operation 0! code match is successiul,
Tip
please do n agaln.
. II yuu dm not heat the sound "di dl". I| mans that ME opevalicn cl Dude match Is wvcng.
Q Warm tips:
1 When using remote contvoi to control cleanev. it shouid be within 7m oi the scope oi wireiess signal.
omen/vise conimi may fan.
2 When pressing sell-vechavging butlon‘ Search may Vail due in complicated obstacies av om at power
.10.
Instructions :
Funcfion Function ln'ormation
wnen cleaner bi stantroy rriooe urth operation, press “ flex“, " button. cleaner
Stan/5“” enters into automatic cleaning mode: cleaner operates at set speed Press again to stoq
1 Turn cncieaner switch. N
2. Press remote control " rrna ” button: press > button. nour tcon EB: will btihlt
on display screen press remote control A or v button to clrccse tirne
‘ 3 Press remote control 4 or > button, minute :39 wiilbtink. press A 01V to
Day, time choose minute
setting 4 Press remote control 4 or > button to enteroay setting
5. Day can be set dliectly by pressing button “ SUN“ . “ MON ‘ .. ,. or ‘SAT ".
o Alter setbng, press remote control “ 0K “ buttnn
Ramaik‘ pressing Power button can cancel the setting.
l Turn on cleaner switch.
2 Press narrate control " ,TGER " button, icon “ su Mom WE TH FR SA “ will
display ano enter into day schedule setting
a Scnecuie seveiat trays or one tray tor cleaning, directty pless needed any bullurr.
Daytime schedule corresponding day icon will display an the display screen
setting 4 Pressrenicte control 4 or > outmn, hcur appointment 53: will ink,then
press A or v button to choose hour
a Press remote control 4 or > button, niinute appointment
press A or v button to choose minute.
6 Atteltlnistting day 01 new setting. piess " CK .. buttm to pvfiewe the setting
ano quit
Remark pressing Fuwai button can cancel the setting,
5i Wlllbllnkr tnen
Error display 1
Within remote control signal scope, when cleaner nas something wrong, press
-,uffw" button oiaptay screen will disphy cleaner error code
Speed selection
Press remote control “ [1,
display icon " FAST"
Press remote control " $1,, " button to choose slow operation, orsplary screen writ
display icon “ SLOW
Rematk‘ when shutdown tasl-slow speed will choose automatic memory
" button to cnoose last operauon. dlsplay screen will
Shutdown/Canoel/Stop
l. When cleaner is on one display screen displays iunction norrnally.press this button
will shut down or stop cleaner
2. in operation rncrte. press this button can stop any operation mode
a in schedule setting, week and tune. ii you set mistakenly or want m stop the setting,
presetnis button to cancel the setting and return the orig’nel setting
Enter button
l. Alter setting current tinte, press " on " button tu preserve the setting one quit.
2. Arter setting appoiment time press “ 0K " button to preserve the setting and quit
FULL GO
Press remote control "mint,” button, display screen will display icon “ FULL 60" .
arter cleaner battery rs lull. automatic cleaning rnooe will repeat
Self-recharging button
Forward button A
Backward button V
Lett button (
Right button )
encountering obstacles, cieanerwtll 510E cleaning lorwaros automaticaigl
wnen cleaner is in standby croperation mode press this button. cleaner will search
tcr charging duck to merge atncrnaticaily, pie§ this buttcn agin to strap settrrectlaiging
Press Forward button. cleaner clean forwards accorfing t0 arrow press Shutdawn
button to stop cleaning iorwcroei when encountering obstacles cleaner wlll stop
cleaning torwares automatcaiiy
Press Backwavd button, cleaner clean backwards according to arrow, release the
button to stop cleaner.
Hole Lelt button, cleaner le rotate counterclockwise, release the button, cleaner th
stop rotating and operate lorwaros, press shutocwn button to stop cleaner, when
enoountertttg obstacles. cleaner wrll stop cleaning lorwaros automattcairy
Hole nrgnt button, cleaner will rotate ctcekwrse release the botton cleaner rrulii step
rotating and operate lorwarea, press snutoown button to step cleaner when
.11.
4.3 Space Isolator
Lshde Swwch
a OC‘DSE
(I) ., 0 Low
IHH HF| : o ded‘e
O O 6 . d O ngh
2.5mm emllter
aJnfrared eminer
4 Power IndIEEIOI'
Name Function
1 cu) S‘ide Swilch Repsaledly slide me huImnCID can swncn me muslin .
low. middle, and mgh.
\ose,
a (I) C‘ose power S‘ide ms muonCDm (I) ,wmcn means space Isnlator
has been closed,
I: 0 Low gear snag the muonfjm 0 ,power IS an and me canlrul
vange is wnhm 2 m
c e MIdd‘e gear Shae Ihe muonCDm Q , power Is on and me canlrol
vange is mm: 4 m
d . Hrgh gear sude Ihe buflonCDm . , power Is on and the cunlrol
range [5 mm c. m
2 Signal emmer emit \n'rared slgnal w {arm a vlrlual wan.
5 \ntraved emitlev Infrared sxgnal emitted by the mlrareu emvuer anows Ihe cleaner to
work 0 5m away from virtual Walt
4 puwemdma‘o, When sme the button GD to‘owO .rmddle O ,and
mgr. O ‘ Ihe macaw: wnl blmk every 8 seconds and It mu
slop blinking as an mdicamon of no power.
Usage 1. Turn on the power swncn, me power inmcamr blmks.
2. Pm the space \solalov on the «a: floor and against me wan.
‘ Tlps' Pm Ins space Isolalm back agamst me wan o! e‘se the cleaner wm push ms spacs Isu‘atcv
on the back or side, 1
.12..
4.4 Charging Station
Darla"
anti-"mt ,
,\ /\ No obstacles
/ a here
Jim
Usage :
t. install the charging station according to the method at page a, as shown on the above photos.
2. Turn on the power swnch. press the button " Charge " . the cleaner will get backto the charging
station.
a. In the mode “ Auto Cleaning " . when the battery power is low, the machine will get back to the
charging station.
NO. Name Function
When need enhance environment atmosphereppen
the decorative lamp, and put a little essence on the iamp cup.
1 LED decorative
lamp ll wlll give out charmlng lragrance alter an appropriate
temperature.
2 SWW‘ 0! LED Press the button. the LED decorative lamp will turn ori/otl.
decorative lamp
a Power indicalor When charging station is oowered on. the indicator is on.
4 Charging When charging station connects to the cleaner, the indicator
indicate, will blink.
Emitting signal is the unique way to guide the cleaner to
5 s I :1 return to the charging station to recharge, so the signal
‘9”3 W‘" W Window should be cleaned regularly to ensure the sensitivtty
and accuracy
6 Chatglng The charging electrodes should contact well with cleaner
electrodes electrodes, or else the charging will (all.
7 Dc socket Output DC24V connector.
4.5 Charging Methods
4.5.1 Manual Charging :
{A Dang ADang
/ AElectric shock.
. «u,»-
443':
lei—w;
1. Charge the machine with an adaptor: 2 Connect the plug between the adaptor and charging
connect the machine with the adaptor, station. then put the machine behind the charging
then insert plug into the socket, station, put the charging electrode on the charging
station directly, rihally connect the power socket
.13.
4.5.2 Auto Charging ;
LChargthg by smart phone: 2 Auto charglng:
Ftlstty tnstall the App. then open the When the battery powev ts tew duving the cteantng.
control Intertace. Cltck the “ charge " the cteanel wiH emtl the sound " dt dt " .the main
button and the cleaner wilt tind the brush wttl also stop worktng, and the mach-he wttl get
chavgtng base in the etfecliva scope. hack to the chargthg statton automatically.
QTIPS
Ftease mean the deanet
mgutarty accotdmg to the
usage
when you do not use
the cleaner. please
make sure you Ium an
the power switch. test
damaqe the battery
"The machine is not
used tor a tuhgttme
please charge the battery
lulty then take tl out and
but tl In cool mace, keep
the bottom at cleanev dry.
L Before cleanmg the maln body. utease tum D“ the power swttch and lake
out the powev plug.
2. Please wash the matn bady with water and neutrat detelgent and make
sure the mop ts dry, do not put the water into the machthe.
a. Do not wash the machine with otl.
5.3 Clean the Dust Box
5.3.1 Install the Dust Box
1. Push the butlon on the hunt 2. Press the red buttart on dust 3 Turn out the tan assembty. and
slde and then putl backwards ID box. the tart asst-Emmy wtlt pult the two bucktes, then the tart
take out the dust box auwmattcatty pop up will be opened
.14.
5.3.2 Clean the Dust Box
Flrsfly. pour out the dust. men use
the clean men to clean the dust box
and Ian assembly. Take om lhe fan
assembly. am then clean the clusl box
Wlll’l WaleV
t. Remark me lan assembly cannol be
cleaned dlveclly wttlr water .
l Ftrs1. pull oul me dust box men pull me 2 Take on! the filler. and lhen clean lhe dust
buckle an lhe double slde and open the balfle wtth lhe clean brush.
a. ll you find much dust on the dust 4 Push lhe liller out at the buckle from the
box and llllel. you can wash lhe filter and dusl bottom lu tap. and then replace the llllel wtth a
box Inslde. \ Remark It can reuse alter new and clean one.
airlng l
5.5 Clean the Main Brush
5.5.1 Assemble and Disassemble lhe Main Brush
I. As shown above push lhe buckle slrongly, 2. Grasp Ihe mlddle bvlslle brush or mlddle
and Ill! ll up. rubbel blush, and Mt it up
.15.
/@ )9) 4@
Rubber sleeve Bearlng
3 Take cm the mlddle bvislle brush or mlddle 4 Take cut the rubber sleeve lwm the rmddle
mbbev blush bllslle blush or mlddle Vubbel brush
Tips: There ls a bearing in the rubber sleeve.
hen you clean "19 main brush. Check whefiher
lhe bearlng lalls oil. If it is. please put it In lhe
rubber sleeve
5.5.2 Clean the Middle Bristle Brush or Middle Rubber Brush
1. As shown above, plaase clean the middle 2. AS Shown above, clean the new and other
bristle brush or mlddle rubber brush regularly lhmgs regularly on lhe muddle brlslle brush or
wilh a clean brush. Middle rubber brush.
5.6 Clean the Side Brush
1. Take oul me screw mm a 2. Take out (he slde brush. clean 3. Pm me side mush m the hole
screwdnver on the side brush. the hair on me slde brush. then lack the screw on the side brush.
clean lhe entanglement in lhe
slot
.15.
5.7 Clean the Front Wheel
1 Pull out the tram wheel with fingers or a
tool. l Shawn as plelure l
2 Clean the hunt wheel wlth lhe clean brush
3 Fm the front wheel on corresponding place
and press It down when lnstallatlorl.
l Tips ; Hair and a strip at cloth may twme lrr
the axle cl the wheels. please Clean ll
regularly)
5.8 Clean the Left Wheel and Right Wheel
1.0learl with the clean brush, do not clean wrth water
l Tlps Hall and a strip at cloth may Mlne lrl the axis at the
wheels, please clean ll regularly. l
5.9 Clean the Sensors
Ills suggested that you should mop (he
sehsorwlhdow with dry clath after cleahlrlg
the sensors. lest Ihe dust ls accumulated on
the wlndow and Inlluencfl the functlon.
Wall detection sensors
5.10 Clean the Trailing Bar Assembly
Q Tlps The Iralllrlg bar assembly lS an accessory lnal ls sullable Io lhe fiat iloul please use It accordlng
to the house envlronmenl,
Please assemble and dlsassemble the iralllng bar assembly according ID the above photo.
'fips: l.Wheh you rnsLall lhe shaplorhr on the Dolh sldeslyou should press or take ll out Irgmly
perpendicular lo the deanem)! else the snap JDlnl wlll be broken
2 Press Ihé middle of the Iralllng bar, it ls successiul when you heal the sound ” ka ka "
.17.
Clean the Mop
LThere is a stlcker on the lraillrlg bar, so lt ls
easy to assemble and dlsassemhle Ihe map.
2 The mop can be dry or war rm use
6.00’mmon Errors
6.1 Alarm and Prompt Func1ion
Q True r.lrrrre cleaner slov Worklngr rr wrl erml the alarm sauna “ di dl "
2 Tmuhleshummg according to me error code on me screen or rrre remme mmrol
Error
Code Reason Error performance Solulron Remarks
The wound ammo" rr onsracles on rrre sensors 1.Clean llre ground deiecliorr Clean me ground
01 SEHEOVS are Invahd, W‘HGOW. sensms «Selenium sensors
2 Blocked on me step 2.1m uul lhe cleaner. regularly
PW WWW” 1 ma maln brush is blocked. Checkrha mam brush and clean Ihe malrr blush
02 W" “‘E ““9 2 Halr ands 5mg orclulrr clean me marn brush. regularly
““5“ '53“ ‘0 "‘9 (wlnc m mo mam mum
molar larlure.
1 The aha ln mndE IS The bane Dwerls
r Th l l m "a 9 W v
03 Battery power ls low 2 r, 0:: figsjgjgg'fmj; changed aulomalically. exhausmti rr can not
(marry 2.?1euse charge me macrrrrre gel back lo rrra dlarg
arlificrally ring staliorl
LE“ and n m wheels 11h: wheels ire blacked Chm "‘9 '9“ and ham wheelsr alga" mg wheel,
“4 a” bad 9 2r Harrarm aslrlp or clom 0‘68" "'6 emaw‘emem 0M“ mqularly.
[wine ln me wheels IE" and 1‘9?" wheels
mo dual box m the unslarl me ausl box
as Dusl box machine 2 Check whether «he dust box
2 Poor rrrslallarrun or ls installed properly
dusl box
6.2 Troubleshooting
No.
Faults
Solulion
Walk back all llre lrrrre
The cleaner does rror work
madrrne,
r. ll ls bener to avmd ma cleaner wnrklng m ma powerM baams or lrgrrr.
2. ll ls better lo mm are deaner warklng m me asap black Carpet
a. cum whether me ground «erecllun sensurs are covered by ausr and
other rrrirrgs. please clean [hem mm a prece 0! dry clolrr
1. Chem wnemer the power swlto’n ls on and the power rndlcalor ls on
2. Check whsmel the cleaner has enuugh power. il mlr plsase charge the
.13.
6.2 Troubleshooting
No. Faults Solutions
I Check whether the LED indicator oi charging station is out
The cleaner does not
3 n ‘ H 2 Check whether there are obsmcles hetween cleaner and onarg'ng station.
E ”9’ “‘3’“ “a Y 3 When tne battery power I5 law please charge the machine artificially
4 The cieaner fines not onset whether the installation at space isolator ts cerrectJum on the power
detect the space Isaiator oi space isotatun check whether the power indicator is on
The dam, can my I Check whether you use the engrrtal adaptor and insert tne plug.
5 charge “Mary 2 it the appcaranco at tho battery is common. damaged and so on
please stop using the cleaner and call our customer servicers
6 The remote onntml does 1 Check whether the installation of remote control is correct
not work 2 Check whether the stgnat receiver is dirty or damaged
Q Warm tips. it there are still problems alter doing those steps like the solutions mentioned above,
please contact our customer servtcers
7.Technical Parameters
Main Body Parameters Accessories Parameters
Working Voltage DC14.4 V Adaptor
Rated Power 24 W Output Voltage D024V
Battery Ni-MH Output Current T. tOOOmA
Battery Capacity 2200mAh Remote Control
Charging Time About 374H Remote Distance 7M
Working Time a 60 min Battery AAA alkaline batteries ‘2
Work Temp Range -1o'c «45C Space Isolator
Work Humidity Range s 90%RH Control Distance 5M
Dust Box Capacity 350ml Battery D alkaline bat1eries ‘2
Dimension 320‘320‘87mm Charging Station
Noise < 65dB Input Voltage DC 24V
Wireless Remote ISM Frequency Band 2.4GHz
Q Remarks: Our company reserves the rights of any changes on the technology
and design of the product for its continuous improvement. The final interpretation is
owned by our company.
.19.
(Android)
.20.
R emark
Because oilhe soflware version upgrade or other reasons, the contents ofthls document will not
be regularly updated, Unless otherwise agreed. this document is only used as a guide, all statements,
Inlormation. and recommendations in this document do not constitute any express orimplied warranty.
S um marl ze
SWEEHOME is a smart application APP based on the Andrord platform. This document provides
the tirsHlme user With use methods and some notices,
Test and operating environment
Adevlce (phone ortablet PC) with android system above 2.2 version, one or more intelligent
applications.
Software lnstallatlon
install the latest SWEEHOME APP(velsion 1.0) in me android devices,
APP'S name -, SWEEHOMEapk
Alter installing APP according to the correct procedures you can rind the lean
SWEEHOME in the list of applications (as anown on the right)
(SWEEHOME App can be downloaoeo lrurrl Gougle Play)
Preparation
1. Tum on the cleaner, and confirm the SSID on the cleaner (such as‘ APWlll""‘*).
2. Tum on the “ settings" at the phone to set WLAN.
3, Confirm the new WLAN hotspots on the list. select above SSID to connect, the delaull
password: 88888888.
1. Open the application program of SWEEHOME :
First line the WlFl with the beginning or 'AP «3" in your phone settings and oonnecrrenierme initial
password) lnen open Ihe application, and me screen will display for 3 seconds or more
The right picture below shows the Initial state 01 the device listener being opened. Make sure
Anemia devroe nave oeen connected with the vaouum cleaner WIFI oerore opening the appllcation.
The above is a device MMOrk connection.ellective in an open area within 100 meters (YDU can
switchto external networks awardan to "Modify Device Network Mode“ on page 30 to realize remote
control.)
(or... won l-llj
m o
/ APWMFiwzoo n: u?
non.
summon
snug-Winn
WM
awwn-Em
Wl1l1
are.
Cllck the top-right button to add device.
.21.
2. Add device
Normal-add device:
Click all the button " Add device " on top right carrier of the equipment iisl to enter into device adding
window as shown on the ieit beiow picture, and then input the name. i0 and password oi the device
(the detault password ls " 88888888 ") . click on the button “ save" to save it. and click on the button
"return' to back to the device list page. the device will be automatically connected.
Quick-add device :
For the device wllli the same LAN. you on quickly search and add the device through the LAN
(provided lhetthe device and Android device have been connected to the same router).
Ciick " LAN search " and the system will automatically Search the devices, melt ail devices wili be
listed (as shown below). For the device which have been added. there will be a word of "has been
added". Click and manuaiiy add the device which "has been added'. the system wiii prompt and ignore
this operation: Ciick the Uri-added device to add to lili outthe Device D and Password (the delault
password is " 68888888 " ) then save it. (Click the “ add all devices " button and system will
automatically connect all Lin-added devices In LAN.) Cllck the back button to return to page at device
list and the system will automallcally connect all online devices.
itsemem )
i...- u—e mswmrexuevs
nu mm mm museum”, W mm m. manhunt.”
WI? Denali? NSSMGZE-XDEVR
e...” .....,... ,
MM,-W-mmvemnw mnim-pem-nwem
W...“ New
The symImI DI stars malked in square can help li’ie users add the nniysi’todwldevlne,wi1eri Ihere
is a marked device. the saltware will directly into video mode interiaee after opening the AFP (the
cunnected state is on the righl picture below)
.22.
3‘ Real-lime video preview
In device lisuhe device in connaclion slats Will be shown as “Connected“.wnila Ihe device wmioul
connefllon wlll be shown as "Diswnnemed' lick "connected“ device's piclureyuu will see veal-lime
Vldeo preview (show on right pldure below).
Real-lime vldeos can be seen in veal-time video preview rnieriace; code rare and irarne rare an be
shown wide! the video.
Bultcns under the Inleiface aie‘ Screen Capture Display leml. Flasulullon 5mm and Cleaning
Schedule " Display Control " billion lS used in toggle beiween comm! mode and preview mode: in conlrol
mode, the work mode oi cleaning label can be cur-ironed by conirol inieriace (delalls auaoired in latter
cnapiers) " Resolution Swlldl “ human can veallze ‘ standard dellnmon " and “ high deiinriion "
switches wnen pressing these function bullons under me lnlerlace Dultuns will Ium blue, equipmem
will enier into work made according lo indication press button again to gun irom me work mode
Click vrdeo preView area in video pieview lnlerface can regulate Vldeo eflecis (bnghlness and contrast),
mm" WM
i >
Resolution
Screen Capiure Swnch
Cleaning
' hdl
D playC$n%%l“ w ‘W lCD-OSEB ue
4. Control interface
ClIGk the “ display control " butlon enter
inio the opsvaliun Imelface (as shown on
Me right) You can opevale the deanev
by any lnsllucllon in inns interface
4-1. Power
CHck the “ power " be In hlbema‘iug mode. 0”“ “ WWE' P 395“” to “Ck ‘° standay
mode‘
@WWW
4-2. Charge
In standby mode. Cllck " charge ‘ m emer
imo recharging mode wilh Ihellasmng of
lhe progress bar.
Chck “ charge " agalnlo back my standby
mode
4-3. Speed setting
m slandby mode. sel the auto-meaning Click " lasl " to enter in slow speed mode,
speed. ' defauh is faalapeed ‘ and click " slow" to backm (ask mode
namely standby mode‘
Hum |W
4-4. Autoclean
In slandby made, dick " Autocleln " lo ante!
into the aulo-cleanlng mode with [he flash‘ng ol
Ihe pvogvess Dav.
cuck " charge " aga‘n Io back xo sundry
mode
.25.
4-54 Question
“ Quesllon " \s a lemindlng lunctmn ol arm \I Ihere is an arm. me progress bar wil‘ flash
code, Under norms! operaung common in red. And mere wm be an error code
clicking it wiu Show the code “ oo“ smw'ng on I119 Ramona Comm Afler repamng,
the cleaner will sen-mspec‘ and back
to s‘andby mode
4-6. Manual operation
Von can manually operate the cbeaner in the
standby status
Click me direct‘on button (on me rlght of the
camera icon) 10 adjust the ang‘e 0! camera.
Ihan 4 limes.)
Chck fine foul dwrecfion humans ‘0 move We
c‘eaner folwald. back‘ lefl mm and right tum
5. Cleaning Appointment
Click the clock on the lawerrright eornerm Alter enienng into cleaning appointment
enter inm cleaning schedule mode. inlenace. click an to set hourand minute‘
dink L to sel dayr(same
Ilme in awhole week can be scheduied)
mm
on
Suanue Wed 1m. F" sn
x.m.iwm..m MW
Therm lv‘u :2 A v
minim
Sun Mon 1... v4.4 m. m m
m Wm mi
Niel successfui appointment, ciick
uppevrrighl comer i0 save me sefllng.
Niel preserving ihe seumg. " Sumessiul Appomimem "
wiil be displayed.
Date
SunMTue Wed Thu Fn Set
an Amumymwm Hm»
Mme n—ln
Repetition
sun Mon Tue Wed Thu Fn Sal
.27.
6. Device Editing Interface
Click the arrow region " connected ” Iu enter
into me interface ai sdlting paramelsrs
(as shown on me right).
My iavoriie. .
Preview Piaure
Change device iniomiaiinn )
change device parameter
Need cunnecl mus device
Change device network mode )
Need connecl lhls device
Abnut device
Need connect thls device
é EVERVBODY
.28.
ans-msns-
Connected
t)
My favorlle: Turn on In blue shows
foliowing thk device. And eath time 512an this
App it wiH enlerme realaiime video Image. The
close switch shows not loliowing lhls device.
App can oniy ioilow one device.
Preview Picture screensnms wm be siored in
«us directory lor Viewing.
Change device Inlorrneiien: can change the
device inlorrnaiion.
Change device parameier. can change the
brighiness and contrast.
Change device neiwork mode: can toggle me
netwoik mode in WiFI 07 AP.
About device: show the device Ininrmaliun of
iimiwave version, network mode and SSID.
A ‘ Prewew pic'ure;
mick “ preview picture“ button to emerthe
image tile lists. select the file to v|ew.
mam: l
B .- Change dense mlormation:
In the connec‘ed condilion, modify
Ihe " Name " according my me picmre below.
FM the password modiflcaklon. c‘lckme bukon
" synchronize to me remote dame " to enter
the old password and new password 018 d‘gils
(the delaull password is 88888888). And then
click the mp ngm bulmn to save u.
m m—ozsm-m
user my my" .m m. Fm sump!» hm dual
w. a. vu n ‘ , mum.“
mum RJssmzszm...
m flu-«I:
urn rum
mama-mama
mm m- m ‘P-sswmd‘ can a. mm 5"
WWW: 'thhmnuklu mammal:
flem' naefl named m am.
c ,- Change dewce parameter:
According ‘ome acmal reqmremenllo adlus‘
the brightness and contrast 0! Ihe video
lnlen‘ace .
‘m drwrs w rnnmrwfl
e—u:
Cumin-ml—
up...
mm:—
.29.
D Change device network mode:
cuck ” change dew» network mode “ (shown on the left below) The 5111va "Item displays 1172
connected "6|ka APVVIF‘OQ6276, Slide Ihe bullun to swlmh the nelwurk mode (3‘in WIFI WHICH
need to be nannemed and emenne Win passwofd.lhen ducklhe top right bulmn m synchromze
to device ends,remme control wiH be reauzed using WIF‘ network mode
Connect wun dwflerent mulers by swilching Android device in Wl-Fl mode Click " choose ssm "
m access In Wl-Fl menace Choose new mum and connect back to In let: Imarlace lo mpul
password. Click mp nghl bullon Ia synenmnuza m device Ends.
E ,‘ Check dew/woe mlonnanon Intervace:
mick " Abuutdewee " huflcnlo meek me
dEVIDE Infmmahml- meum vemon. 2mm":
Nil-mi mndl: AP
ssln 0! Device WI'FII AMPI’IIGZH
.30.
6. Remove device
\n the device list imerface‘ Click the top lefi "editing" buuon Io enler mm the inlerface of
device-deleting Click Iha \afl “de‘atmg buhon " at "19 list. device ‘3 in Ihe delsling Male,
Click Ihs mp \sfl "edning' human to 9in me edxiing condxlion.
ms mm warmed
When lhe devlce Is In Ihe de‘ellng condlllun.
click me o builun (u 9in Ihe deletlng
Dondlllun. Chck " Delele " Io delele Ihe
device,
.31.
(IOS)
.32.
R emark
Because olll'le soflware version upgrade or other reasons, the oontsnts or this document will not
be regularly updated, Unless otherwise agreed. this documenl is only used as a guide. all s1atements,
Inlormatiorl. and recommendations in this document do not constitute any express orimplied warranty.
S um mari ze
SWEEHOME ls a smart application APP based on the IDS platlovm. Thls document promise the
ilrstrtlme user with use methods and some notices.
Test and operating environment
Adevlce (phone ortablet PC) with IOS system on above [OS 5 version, one or more intelligent
applications.
Software lnstaliatlon
install the latesl SWEEHOME APP(velsion 1.0) in me IOS devices.
The APP‘s name : SWEEHOMEaak
Alter installing APP according to the normal procedures. you can lirtd the icon
SWEEHOME in the list or applications (as shown on the right)
Preparation
1, Open the cleaner, and confirm the SSlD on the cleaner (suoh as: APWlfi"'“').
2 Open the “ settings " oi the phone to set WLAN
3 Confirm the new WLAN hotspots on the list, select above SSID to connect, the delault
password: 53838338
1. Open the application program of SWEEHOME :
First (ind the WIFi withthe beginning of “AP 6“ in your phone settings and oonnect(ettter the Initial
password) then open the appllmtlon, and the Screen th| dlsplay rm 3 seconds or more
The right picture below shows the initial state or the device list after being opened. Make sure
Ios Get/Ice have been conneded wilh the vacuum deanerWlFi belore upening the application.
The above is a device network oonnection,e"ective in an Open area within 100 meters (You can
switch ‘0 external networks according to "Modify Device Network Mode“ on page 42 to realize remote
control.)
< Settings WLAN
M 0 E1
./ AmAPMnustzu - v r
nuns
momma I9 ,3
anamlwlrm
seal/VIM
ENWIFLENI I 9 {in
mm s q xii
XE...
Cllck the tap-right Dalian lo and devicet
.33.
2. Add device
Normal-add device:
Click all the button " Add device " on top right comer of the equipment list to enter into device adding
window as shown on the ieit below picture. and then input the name. l0 and passwold oi the device
(the delault passwoid ls " 88888888 " ), click on the button “ save" to save. and click on the butlcn
“ reluin " to back to the device list page, the device will automatically be connected.
Quick-add device :
Foi the device wllh the same LAN. you on quickly seam" and add the device through the LAN
(provided lhaltne device and [OS device have been connecled lo the same router).
Click " LAN Search " and the system will automatically Search the devices. then all devices will be
listed (as shown below). Fl)! the devices have been added, there will be a word of “has been
added". Click and manually add the device wnioe "has been added'. the system will prompt and ignore
this opelalion: Click the Uri-added device to till out the Device D and Passwold (the default password is
" 88888688 " ) then save it. (Clicklne “ add all devices " button and system will automatically
connect all un—added devices in LAN.) ClicKIhe back button to ieturn to page of device list and the
system will automatically connect all unllne devices.
“seams-xix“ )
m- u—e mswmmxuew
m MW mm m...w..«.m., W mm m... {wumwmm
WI? Dun“? NSSMGZE-XDEVR
....l.. .....,... ,
MM,-W-pwmvmmmw “mum-pmn-mmm
we...“ Mm.”
The symImI DI stats malked in square can help the users add the only snortwt device. when
them is mavked device. Ihe software will directly into video mode interface aiiei opening the AFP (the
cunnected slate is on the righl picture below)
.34.
3‘ Real-lime video preview
In device lisuhe device in connaclion slats Wlll be shown as “Connected".whila Ihe device whiloul
connefllon wlll be shown as "Dlswnnemed' lick "connected“ device's piciureyuu will see real-lime
Video preview (show on right plclure below).
Healelime Vldeos can be seen in realelime Video preview interface: code rate and lrame rare ran be
Shawn under the video.
Sultans under the inlsilace are Screen Capture Dlsplay Control, Resaluiion Swrlch and Cleanlng
Schedule. “ Display Control " bullon is used to swrlch belween conirol mods and prewew moder ln conlrol
mode, the work mode 01 cleaning tubal can be conlrolled by conlrol lnlerlace (delalls attached In Iaher
chaplers), “ Resolulian Swllch " button can reallze A standard deilnman " and " high dellnilion h
swilches. When pressing these runcrion bullons under me interlace Dullans wlll Iurn blue. equlpmem
will enler inlo work made according to lndlmllurlr press butinn again lo qull item we work made.
Click VldED prevrew area in video preview lnlerlace can regulate Video efleds (bngmness and contrast).
run-1min. mm
B t)
Regnllltinn
Screen Capture Swnch
Cleaning
Display 0 Acheduls
(El ll an in l ®-‘l—
4, Control interface
Click the " display control " button; enter
Into the operation Inlerlace (as shown on
me right). You can operale the cleaner
by any lnslrucllon In Ihis lmenace.
4-1. Power
CHckIhe "powev " Io ants! in hlbernaung mode 0”“ “ WWE' P 395“” to “Ck ‘°
standby mode‘
@WWW
4-2. Charge
In standby mode. Cllck " charge ‘ m emer
imo recharging mode wilh Ihellasmng of
lhe progress bar.
Chck “ charge " agalnlo back my standby
mode
4-3. Speed setting
m slandby mode.set the auto-cleaning Click " lasl " to enter in slow speed mode,
speed. ' defeuh is fastepeed ‘ and tick “ slow " mbaoklo laslmoda namely
slanmy mode.
Hum |W
4-4. Autoclean
In slandby made, dick " Autocleln " lo ante!
into the aulo-cleanlng mode with [he flash‘ng ol
Ihe pvogvess Dav.
cuck "charge" aga‘nlo backxo
standby mode
.37.
4-54 Question
“ Quesllon' is a lemindlng lunction ol arm
code, Under norms! operating condiiion‘
clicking it wiil Show the code “ 00“
il Ihere is an arm. me progress bar wili flash
in ted‘ And mere wiil be an error code showing
in the Rsmme Control‘ After repairing,ths
cleaner wiil sell-inspect and back ‘0 standby
mode,
4-6. Manual operation
Von can manually operate the cieaner in the
standby status
Click me direction button (on me right of the
camera icon) 10 adjust the angie oi camera.
man 4 times.)
Click Me foul direcfion humans in move We
cieaner imwmd. back‘ lefl mm and right tum
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Modify Date : 2016:05:19 17:25:28+08:00 Create Date : 2016:05:19 17:25:15+08:00 Metadata Date : 2016:05:19 17:25:28+08:00 Creator Tool : pdfFactory Pro www.pdffactory.com Format : application/pdf Title : 整机说明书 Creator : liubaoyang Document ID : uuid:7e978a97-2a9a-4cc4-873b-3e9ae3bf0061 Instance ID : uuid:b06f8212-4ded-493f-9c6d-4b3c6d8788e9 Producer : pdfFactory Pro 5.20 (Windows XP Professional x86 Chinese) Page Count : 39 Author : liubaoyangEXIF Metadata provided by EXIF.tools