HIT orporated HITBTPAHBA001 Bluetooth Phone Adapter User Manual

HIT Incorporated Bluetooth Phone Adapter

User Manual

Download: HIT orporated HITBTPAHBA001 Bluetooth Phone Adapter User Manual
Mirror Download [FCC.gov]HIT orporated HITBTPAHBA001 Bluetooth Phone Adapter User Manual
Document ID259035
Application IDXPiVrxEue9R5JGF2PYIdtQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize4.61kB (57609 bits)
Date Submitted2002-07-26 00:00:00
Date Available2002-07-26 00:00:00
Creation Date2002-07-11 15:03:49
Producing SoftwareAcrobat 5.0 Scan Plug-in for Windows
Document Lastmod2002-07-11 15:14:58
Document TitleUser Manual
Document CreatorAcrobat 5.0 Scan Plug-in for Windows

W Incorporated
Hurlln tut-rhino T.=..‘!'u.l.,rilim" HBA-ll‘l:|
Bluetooth phone adapter manual
"' EFeatures
t Embedded Audio Gateway profile
+ Plug in existing mobile phone via 25 d) phonejack
+ Userefn'endly interface that can be used with Bluetooth enabled
headset devices.
+ Support pin—code input in order to pair with various Bluetaoth headsets
+ 10 meter working distance
"“‘finnt;pune|
Digital 0~9 number indicated LEDsl'”
Pin-Code select Key
Pair Key ( also as Confirm Key)
Status LED
Power Switch
Charger Jack
Audio cable
NP‘S-"z'e9’t‘37‘
(“Digital arrangement
©®®©©
®®®®®
[mtgPIn-Code
You can input the Pin-Code in advance.
Please power on the device. Press the ‘Pin-Code select Key' once.
You will see the digital ‘0‘ is flashing. It will change to digital ‘l' if you
press the “Pin-Code select Key' again. If the number is what you want,
you can press the Confirm Key‘ once and the number will not flash.
Please press “Pin-Code select Key' to select next number you want.
When last number is inputted ok. please press 'Confirm Key' again in
order to finish the 'Input Pin-Code' procedure
If any number is wrong or you want to update the Pin—Code, You must
restart the ‘Input Pin-Code' procedure again.
”it with Headset
Please let headset into the pairing mode.
Power on this device (“21 and you will see the Green LED flash every 2
seconds. You can press the ‘Pair Key' 3 seconds continually.
You will see the Green and Red LED are flashing alternately.
When pair is finished, the device will enter standby mode. The Green
LED is flashing every 2 seconds.
l'zl Only in standby mode. you can do pair procedure.
If you don't sure which state is. You can power off then power on
again and wait the green LED flash once per 2 seconds. This is
standby mode now.
“meet with moblla phone
Plug audio cable into the headset ready mobile phone.
You can enable the auto answer function in your mobile phone.
It will auto transfer to the Bluetooth headset directly when the call in.
It will auto enter the standby mode for the power saving when ends
call. It is like the hand-free in your Bluetooth headset.
QM“
When the Red LED is flashing, please use charger to charge the device.
The red LED will light when charging. And it will be a bit light when full
charge. The charging time needs i.5~2 hours.
You can power off it when charging.
Non Battery Low |Bottery Low
Standby mode Green LED flosh once/2 sec Red LED flosh once/2 sec
Pork mode Green LED flosh once/2 sec Red LED flosh once/2 sec
Talk mode Green LED flash twice/l sec Red LED flash twice/l sec
Poir mode Green & Red LED flash alternately
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Notice: The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2002:07:11 15:14:58+08:00
Create Date                     : 2002:07:11 15:03:49+08:00
Creator                         : Acrobat 5.0 Scan Plug-in for Windows
Page Count                      : 3
Mod Date                        : 2002:07:11 15:14:58+08:00
Creation Date                   : 2002:07:11 15:03:49+08:00
Producer                        : Acrobat 5.0 Scan Plug-in for Windows
Metadata Date                   : 2002:07:11 15:14:58+08:00
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QE5HITBTPAHBA001

Navigation menu