HITACHI TV/VCR Or DVD Combo Manual 97100097
User Manual: HITACHI HITACHI TV/VCR or DVD Combo Manual HITACHI TV/VCR or DVD Combo Owner's Manual, HITACHI TV/VCR or DVD Combo installation guides
Open the PDF directly: View PDF 
.
Page Count: 36
| Download | |
| Open PDF In Browser | View PDF |
HITACHI
19VR7B
Owner's Manual
This TV/VCR Combination will
display television closed
captioning, ( [] or [_l ), in
accordance with paragraph
15.119 of the FCC rules.
Your Complete Guide
to TV/VCR Combination
Viewing and Recording
Using these quality features:
• Hi-Fi system
• Rotary 4-head record/playback system
m Bilingual on-screen menu display selectable in English or Spanish
• Infrared remote control
• Real time tape counter
• 181 channel capability PLL frequency synthesizer tuner with direct station call
• Closed caption system
• Game mode
• Auto power on and off system
• Auto rewind when the end of a tape is reached
• 2 Step picture search operation
• Still
• Digital Auto Tracking (DTR)
• Rental play mode
• Auto repeat
• Time search
• Index search
• Three different tape speeds: SP/LP/SLP
• OTR (One Touch Recording)
• 1 Year, 8 events (including Daily and Weekly Timer Recording)
• Auto return
• Sleep timer
• Auto clock setting
• Alarm time
I
!
!
I
I
I
Printed in Malaysia
0EMN01152 ©Hitachi,
Ltd. 1996
WARNING:
TO REDUCE THE RISK OF I_IRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
MOISTURE.
ii
tl
i
i ii
TO RAIN OR
i
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING
A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT
OPERATING
AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.
IMPORTANT
SAFEGUARDS
1.Read instructions-All
the safety and operating instructions should be read before the appliance is operated.
Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
9.Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the TV/VCR and to protect it from overheating, these openings must not be blocked or covered. The
openings should never be blocked by placing the TV/VCR
on a bed, sofa, rug, or other similar surface. This TV/VCR
should never be placed near or over a radiator or heat
register. This TV/VCR should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer' s instructions have
been adhered to.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All
should be followed.
operating and use instructions
5.Cleaning-Unplug TV/VCR from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION : A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
6.Attachments-Do not use attachments not recommended
by the TV/VCR manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this TV/VCR near waterfor example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8.Accessories-Do not place this TV/VCR on an unstable
cart, stand, tripod, bracket, or table. The TV/VCR may fall,
causing serious injury to someone, and serious damage to
the appliance. Use only with a cart, stand, tripod, bracket,
or table recommended by the
manufacturer, or sold with the PORTABLE CART WARNING
TV/VCR. Any mounting of the
appliance
should follow
the
manufacturer's instructions and
should use a mounting accessory
recommended by the manufacturer. An appliance and cart combination should be moved with
care.
-2-
10.Power Sources-This TVNCR should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For TV/VCRs intended to operate from battery
power, or other sources, refer to the operating instructions.
ll.Grounding
or Polarization-This
TV/VCR is equipped
with a polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
12.Power-Cord
Protection-Power-supply
cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
the point where they exit from the appliance.
EN
5L01
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
CLAMP
ANTENNA
DISCHARGE
UNtT
(NEC SECTION
GROUNDING
"CONDUCTORS
(NEC SECTION
GROUND
NEC - NATIONAL
ELECTRICAL
CODE
_,.._1"-""'_
S2898A
14.Lightning-For added protection for this TV/VCR receiver
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the TVNCR due to lightning and
power-line surges.
810-21)
CLAMPS
POWER SERVICE GROUNDING
ELECTRODE
SYSTEM
(NEC ART 250,
13.Outdoor Antenna gi'ounding-If an outside antenna or
cable system is connected to the TVNCR, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)
810-20)
PART H)
19.Damage Requiring Service-Unplug this TVPCCR from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the
TV/VCR.
c. If the TV/VCR has been exposed to rain or water.
d. If the TV/VCR does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV/VCR to its normal operation.
e. If the TV/VCR has been dropped or damaged in any way.
f. When the TV/VCR exhibits a distinct change in performance-this indicates a need for service.
20.Replacement Parts-When repl_icemeflt parts ai'e'reqfiired,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, injury to persons or other
hazards.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might
be fatal.
21.Safety Check-Upon completion of any service or repairs
to this TV/VCR, ask the service technician to perform
routine safety checks to determine that the TVNCR is in
proper operating condition.
22.Heat-This TV/VCR product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
16.Overloading-D0
not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this TV/VCR through openings as they may touch
dangerous voltage po:mtsor short out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the TVNCR.
18.Servicing-Do not attempt to service this TVNCR yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
-35L01
For safe operation and satisfactory pcrformance
unit, keep the following in mind when selecting
for its installation:
• Shield it from direct sunlight
sources of intense heat.
of your
a place
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting
from an AC wall outlet. Grasp it by the plug.
and keep it away from
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes
at the top and bottom of the unit. Do not place the
unit on a carpet because this will block the ventilation
holes.
• Install unit in a horizontal
• Avoid locations
position.
it
• If, by accident, water is spilled on your unit, unplug
the power cord immediately
and take the unit to an
authorized service center for servicing.
• Do not put your fingers or objects
cassette holder.
• Do not place anything
directly
into the TV/VCR
on top of the unit.
- ii_
subject to strong vibration.
• Do not place the unit near strong magnetic
fieldsl
• Do not move the unit from a cold to a hot place or
vice versa.
Moisture condensation may occur inside the unit when
it is moved from a cold place to a warm place, or after
heating a cold room or under conditions of high humidity. If a tape is played in a TV/VCR which has moisture,
it may damage the tape and TV/VCR. Therefore when
the condensation occurs inside the unit turn the POWER
button on and allow at least 2 hours for the unit to dry
out.
If you do not Use your TViVCR for a pertod 0ftime, turn
off your TV/VCR and disconnect it from an AC wall
outlet.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
i
IMPORTANT
ii
ill
COPYRIGHT INFORMATION
Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted
material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication,
use, or other acts which infringe upon the rights of copyright owners.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occurin a particular installation. If this equ_ipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
_ "
_
....
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
-4-
EN
6F18
IABI_,L
CONI'EN'I'S
• IMPORTANT SAFEGUARDS ............................
2
• PRECAUTIONS ...................................................
4
LOCATION ...........................................
• TV OPERATION ................................................
WATCHING A TV PROGRAM .......................
19
19
GAME MODE ...... ,....................................... _..... 19
::............. 4
PICTURE CONTROL ........................................
19
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE .............................................
4
WARNING ...........................................................
4
• NORMAL PLAYBACK.,_. .......................... :...... 21
• FEATURES ..........................................................
6
• SPECIAL PLAYBACK .......... ;._._
.................. _.:.." 22
• VIDEO CASSETTE ...................... .......................
7
RENTAL PLAYBACK ......... ....'..................... ... 22
REPEAT PLAYBACK...."..."..:.:.: ............ i......... 22
• OPERATING CONTROLS AND FUNCTIONS..
8
• PREPARATION FOR USE ..................... .......... I0
CABLE CONNECTIONS ..................................
CLOSED CAPTION SYSTEM .........2 ........... ... 20
• SEARCH ......... .,............. •......,.,O. .....:...._.,.......... 23
COUNTER MEMORY ...................................... 23
10
TIME SEARCH ....... :................. ;........ '...:,.......... 23
INDEX SEARCH ::'.....:_i..... 'i........................ '..... 24
INSTALLING THE BATTERIES ................ _.... 11
EXTERNAL INPUT MODE ..............................
11
• RECORDING
• MTS (Multi-Channel Television Sound)
NORMAL RECORDING ....................... ........... 25
SKIPPING SOME MATERIALS DURING
RECORDING .....................................................
25
SrSTEM ........................................................
.....: IZ
CHECKING THE SELECTED MTS MODE .... 12
MTS RECORDING/MONITOR
MODE ........... 12
SELECTING THE MTS SYSTEM ....................
• PRESET FOR USE ............................................
PRESET FOR THE FIRST TIME .....................
DELETING (OR ADDING) PRESET
CHANNEL ..................................................
......... _....... i;;_h.:,_....:,...:....._.;........ 25
OTR (One Touch Recording) .......... ,............... ... 26
COPYING A VIDEO CASSETTE
(Requires another VCR) .............................. _......, 26
13
14
14
• TIMER ................................................................
27
AUTOMATIC TIMER RECORDING .............. 27
:...... 14
AUTO PRESET AGAIN ....................................
15
SELECTING THE LANGUAGE ......................
15
DAYLIGHT-SAVING TIME ............................
15
SETTING THE CLOCK
(AUTO / MANUAL) ................ :.........................
16
• ON SCREEN DISPLAY. ....................................
18
• SPECIAL FEATURES ......................................
18
DEGAUSSING ...................................................
18
AUTO REWIND-EJECT
18
...................................
AUTO RETURN ................................................
29
SLEEP TIMER ...................................................
29
ALARM TIMER ...................................... .... ....... 30
• TROUBLESHOOTING
• MAINTENAN(gE
:
GUIDE .......................
31
....
32
• TECHNICAL SPECIFICATIONS
................... 33
• CABLE CHANNEL DESIGNATIONS ............ 34
The serial number of this product may be found on the back of the unit. No others have the same serial number
as yours. You should record the number and other vital information here and retain this book as a permanent record
of your purchase to aid identification in case of theft.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
i Serial No.
-5-
EN
6F18
FEATURES
• Hi-Fi System-The Hi-Fi stereo recording system offers you super sound quality with a dynamic range of
80rib and frequency response from 20Hz to 20kHz
and 0.005% wow and flutter.
• Rotary 4-head record/playback system
In
• Real time tape counter-This shows the elapsed recording or playback time in hours, minutes, and seconds. The "-" indication
is rewound further than
"0:00:00".
will appear when the tape
the tape counter position
• 181 channel capability PLL frequency synthesizer
tuner with direct station call- (A converter may be
necessary to view scrambled cable channels.)
• Closed caption system-You
may view specially
labeled (cc) TV programs,
movies, news, prerecorded tapes, etc. with either a dialogue caption or
text display added to the program.
• Game mode-Allows
TV/VCR
able for use with a TV game.
display to be suit-
• Auto power on and off system- (when a tape is inserted)
• Auto rewind when the end of a tape is reached(not in the case of timer recording).
• 2 Step picture search operation-
• Rental play mode-Improves
quality of worn tapes, especially
the tracking
playback
picture
rental tapes.
• Auto repeat-Allows
you to repeat a tape indefinitely
without pressing the PLAY button.
• Infrared remote control
• Bilingual on screen menu display selectable
English or Spanish
• Digital Auto Tracking (DTR)-Adjusts
automatically
for each tape you play.
• Time search- Allows you to set the TV/VCR to advance the tape by entering the desired playback time
you want to skip.
• Index searching.
Lets you Index the start of a record-
• Three different tape speeds
: SP/LP/SLP
• OTR (OneTouch Recording)--Instant
timed recording from 30 to 480 minutes is possible at the push
of the REC/OTR button.
• 1 Year, 8 events (Including Dally and Weekly
Timer Recording) The built-in timer allows you to
record up to 8 programs at different times on different
channels up to 1 year in advance. The Daily timer
allows recordings to be made of daily broadcasts, and
the Weekly timer allow_ recording(s)
to be made
once a week up to the end of the tape.
• Auto return-After
timer recording is finished, the
beginning
of the recorded
program(s)
can be
searched.
• Sleep timer-Allows
you _ to turn off the TV/VCR
without using the POWER button after a desired time
period.
You can view
a video program at a high speed or super high speed
in either a forward or reverse direction in LP and SLP
mode.
• Auto clock setting-Allo_vs
gram of the PBS broadcast.
• Still-"Freeze" the picture at any time, for close viewing of a particular scene. Only tapes recorded in SLP
mode will show a fairly clear still picture.
you to use the clock pro-
• Alarm timer-Allows
you to turn on the TV/VCR
without using the POWER button at a desired time.
- 6-
EN
6F18
VIDEO
CASSETTE
This TV/VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of
high-quality tapes. Do not use poor quality or damaged tapes.
PRECAUTIONS
INSERTING
• Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a warm
place. Before using a tape with these conditions, to
avoid damage to the tape and your TV/VCR, wait
until the tape has warmed to room temperature and
the moisture has evaporated.
A CASSETTE
Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette
until it is drawn into the TV/VCR.
The TV/VCR will automatically turn on.
• Avoid extreme heat, high humidity and magnetic
fields.
• Do not tamper with the cassette mechanism.
CORRECT
• Do not touch the tape with your fingers.
THREE DIFFERENT
TAPE SPEEDS
Before recording, select the tape speed from : SP mode
(Standard Play), LP mode (Long Play) or SLP mode
(Super Long Play).
The table below shows the maximum recording/playback time using T60, T120 or T160 tapes in each mode.
Tape Speed
Recording/Playback
WRONG
A CASSETTE
1) In the StOpmode, press EJECT button on the remote
control or press STOP/EJECT button on the
TV/VCR. The cassette will eject.
2) Pull the cassette out of the cassette compartment.
Time
T60
T120
T160
SP mode
1 hour
2 hours
2-2/3 hours
LP mode
2 hours
4 hours
5-1/3 hours
SLP mode
3 hours
6 hours
8 hours
'lMoeof tape
REMOVING
•
i
i
3) Store the cassette in its case as shown.
l
ERASE PREVENTION
You can prevent accidental
erasing of recording by
breaking off the tab on the
back edge of the cassette.
/
If you decide to record on
the tape again, cover the[
hole with a plastic tape
t
Transparent Tape
EN
-7 -
6F18
OPEKAIING
CONIROL5
AND
FUNC'IIt)N_
- FR( _NT VIEW -
I
fl
Jl
!
_n
T _;
v
r.
12345678
mc_m
v_ot.u_A
9
vc_A
10
I
1
k
- REMOTE CONTROL VIEW-
1 REC indicator- Hashes
t
.
°
dunng recording.
2 Remote sensor window-Receives
nals from the remote control.
the infrared
3 POWER button- Press to turn TV/VCR
Press to activate
the automatic
sig-
on and off.
timer recording.
4 STOP button Press to Stop the tape motion.
EJECT button- Press in the Stop mode to remove
tape from the TV/VCR.
5 REWIND button- Press to rewind
view the picture rapidly in reverse
mode. (Rewind Search)
POWER
(D
1
2
3
C2_ (D
4
5
6
c)
(D
C)
7
8
9
(D
(D
(D
0
+100
(D
(D,
13
MENU
C)
6 PLAY button-
RECORD
8
4
SLOW
PLAY I_
STOP •
of a tape.
8 REC button- Press to begin manual recording.
OTR button-Press
to activate One Touch Record-
18
ing. (used on the TV/VCR
9 VOLUME _
10
_)
Press to begin playback
7 F.FWD button- Press to rapidly advance the tape, or
to view the picture rapidly in forward during the Play
mode. (Forward Search)
17
QREWIND
the tape, or to
during the Play
SELECT
i
14
5
a
F.FVVD_I
buttons-
only)
Press to adjust the volume
level.
16
10 CHANNEL _
buttons-Press to select the channel for viewing or recording.
PICTURECONTROL function-They may also be
used to adjust the picture control. (See page 19.)
(used on the remote control only)
TRACKING +/-function-Press
to minimize video
6
'noise' (lines or dots on screen) during the Play
mode. (See page 21.)
11 Cassette compartment
-8-
EN
6F18
- REAR VIEW -
\/
\
fllllllll IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIII
noDoo ooo
, . "AUt)_b iN VPOEO iN
I
i
)L
'i
24 25
23
12 NUMBER buttons-
i._.,¸
19 ADD/DELETE
Press to select desired channels.
for viewing or recording. To select channels
first press the 0 button and then 1 to 9.
+100 button- Press to select cable channels
nel numbers in the Channel Set Up mode
14). Press to cancel a setting program (for
setting clock or timer program) (See page
(These functions are operative only when
1 to 9,
which
are equal or greater than number 100. (To select
channel 125, first press "+100" bution then press "2"
and "5").
13 ALARM buttonTV/VCR
Press to set the time to turn on the
automatically.
14 SPEED button-Press
speed. (SP/LP/SLP)
(See page 28.)
to set
ture by one frame during the still mode.
16 SLOW button-Press
17 SLEEP buttonpage 29.)
Press
18 C.MEMORY button-
to reduce the playback
to set the Sleep
Press
20 SELECT button-
speed.
Timer.
to set counter
(See
memory
When setting prograni
(for exam-
ple: setting clock or timer program), press to determine your selection and proceed to a next step you
want to input.
recording
15 PAUSF./STILL button- Press to temporarily stop the
tape during the recording or to view a still picture
during playback.
'Frame Advance Function-Press to advance the pic-
(See page
example:
28).
the menu
is shown on the TV screen.)
, _:. _....
)
C.RESET button- Press to reset counter to 0:00:00.
,
desired
button- Press 'to deiete or add chan-
DISPLAY functionthe current channel
Press to display the counter or
number and current time on the
TV screen. (See page 18)
21 MENU buttonTV screen.
Press to display
main menu
on the
22 MUTE button- Press to mute sound. Press it again to
resume sound.
23 ANT, terminal-
Connect
to an antenna
or CATV.
24 AUDIO input Jack- Connect to audio output jack of
your audio equipment or another VCR.
on and off. (See page 23.)
25 VIDEO input jack- Connect to video output jack of
your video camera or another VCR.
J
-9-
EN
6F18
t.JREt'ARAIION
POR
USE
VItbTUttF
VttF/UttF
COMBINED
A N 1I'_NNA
SEPA RA I'E A N 1'ENNA S
In some areas it will be necessary to use an outdoor antenna.
The VHF/UHF Rod Antenna (not supplied) is detachable. Push the stem of the antenna into the hole which
is located on the upper back cabinet of the unit.
Connect the VHF/UHF Rod Antenna or VHF/UHF
Combination Antenna to the ANT. terminal of the
TV/VCR as shown in the diagram below.
VHF Antenna
JHF Antenna
For the best reception, extend the VHF/UHF Rod Antenna fully and adjust its position. (Avoid handling the
top section when making adjustments.)
VHF/UHF Antenna
Flat twin-lead cable
(Not Supplied)
Rod Antenna
CABLE WITHOUT CONVERTER/
DESCRAMBLER
BOX
Use this connection if your cable system connects directly to your TV/VCR without a converter box.
With this connection you, 1) can use your TVNCR Remote Control to select channels, 2) program one or more
unscrambled channels for Automatic Timer Recording.
NOTE:
........
,
Before plugging the Rod antenna into antenna terminal,
check that the pin is not bent. If it is bent, straighten the
pin as illustrated, then plug the pin into antenna terminal.
, _
L
, r
,:
_L' _'q
_.__,
"
...,.:....
Coaxial Cable
(not supplied)
75-ohm
Bent pin
(Needs to be straightened)
i
From Cable System
(Straight pin)
ANT.(_
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected
to the grounding system of the building as close to the point of cable entry as practical.
- 10 -
EN
6F18
CABLE WITH
CONVERTER/DESCRAMBLER
BOX
If your cable service supplies you with a converter box
you can use the basic connection shown here.
With this connection you can record and view any channel including scrambled channels. However, channel selection must be made with the converter box. This means
that channels cannot be changed using the TV/VCR Remote Control. Unattended recording is limited to one
channel at a time.
1) Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity
(+/-) markings.
3) Replace the cover.
*
TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL
1. Set the TV/VCR channel selector to the output channel of the Cable Converter Box. (Ex. CH3)
2. Select the channel to be recorded or viewed on the
Cable Converter Box.
Box (not supplied)
From Cable System
75-ohm
When using an external input
AUX
signal (another VCR or camcorder), connect the player's
audio/video output cables to
the AUDIO IN, VIDEO IN
jacks of your TV/VCR. Then
press CHANNEL • or • button or enter "00" with
number button so that "AUX" appears on the screen.
i
NOTE: When using a cable converter box, you can not
record one channel and view another.
- 11 -
EN
6F18
Whenyoureceive
asignal
fromatapeorVCRtunerchannel
youarewatching,
thestatus
shown
belowwillappear
when you press SELECT button on the remote control.
1] When a program broadcast in stereo can be received,
STEREO appears on the TV/VCR screen.
(PLAY
-HIFI
II,,,
isTop
2ooA
CH321 I,_1 I
ISTER
_,SP
0:00:00
,,,)
2] When a program broadcast in second audio can be
received, SAP appears on the TV/VCR screen.
3] When a program broadcast both in stereo and second
audio can be received, STEREO/SAP appear on the
TV/VCR screen.
NOTE: Although a program may be broadcast in
both stereo and second audio, you cannot record in
both stereo and second audio at the same time.
SAP
A Second Audio Program which means your
program is received in a second language.
HIFI
High Fidelity which produces a clear sound
from two sources.
4] While TV/VCR is set in HIFI stereo mode, HIFI appears on the TV/VCR screen with PLAY. When
PLAY disappears from the TV/VCR screen, HIFI
disappears from the TV/VCR screen as well. While
TV/VCR is set in monaural(MONO) mode, HIFI disappears from the TV/VCR screen.
NOTE: If you play non-HIFl tapes while the
TV/VCR is set in HIFI, HIFI will not appear on the
TV/VCR screen and the TV/VCR will play automatically in monaural.
Type ofbroadcast
TV AUDIO
Display on
the TV screen iSELECTION
• Hi-FI audio track (2-channel)
L-channel
R-channel
Normal audio
track
Regular
(monaural audio)
-None-
-Invalid-
Mono
Mono
Mono
Stereo broadcast
STEREO
STEREO/SAP
L
R
L+R
MONO
L+R
L+R
L+R
STEREO/
MONO
Main audio
program
Sub audio
program
Main audio
program
Main audio
program
Sub audio
program
STEREO
L
R
Sub audio
program
L+R
SAP
Sub audio
program
MONO
L+R
Sub audio
program
L+R
Bilingual broadcast
SAP
SAP
Stereo & Bilingual
broadcast
STEREO
SAP
Sub audio
program
L+R
* To set TV AUDIO SELECTION, refer to "TO SELECT STEREO, SAP OR MONO MODE" on the next page.
-12-
EN
6F18
TO SELECT
Make sure ...
• Power must be turned on.
HIFI MODE
Although the TV/VCR records automatically MTS
broadcasts in HIFI stereo sound, if you play in Hi-Fi
stereo tapes recorded in Hi-Fi stereo, you need to follow
the steps below.
Normally, [HIFI] should be selected for playback with
HIFI sound.
When you play non-HIFI tapes, TV/VCR plays automatically in monaural.
I
I,
i iiii E
J
II
I
I
1 Select"USER'S SET UP"
'rIMER
_'TI_
Then, press SELECT button.
CLOCK
CHANNEL
SET UP
USER'S
SET UP
Iim-
LANGUAGE
ENGUSHI
CAPTION
|_
TIME -MENUSEARCH
FI
INDEX
1) Press MENU button repeatedly to point to "USER'S
SET UP". Then, press SELECT button.
2) Press MENU button repeatedly to point' to "VCR
AUDIO".
3) Press CH • or • button repeatedly until [MONO]
appears.
4) Press MENU button to return to the TV mode.
TO SELECT
MODE
STEREO,
SAP OR MONO
You must select the recording mode in STEREO, SAP
or MONO when you record broadcast. Refer to "MTS
RECORDING/MONITOR MODE" on previous page.
PROGRAMM)NG
RCTURE CGNTROL
Press MENU button repeatedly
to point to "USER'S SET UP".
MODE
You can change the selection to [MoNo1 if you want to
listen to HIFI tapes in normal audio playback.
• You must use the remote control for this procedure.
TO SELECT
MONO
SEARCH
When you play the tape on the TV/VCR later, it will be
in stereo, second audio or mono. Follow the steps below
for selecting the recording mode.
If you select second audio when second audio is not
available, the TV/VCR will record normal audio.
Press MENU button repeatedly
_.E.O_E
_PEAT PLAY
to point to "VCR AUDIO",
_"AU0'°A_°
RE,UR,AuD,O
_gR%]
J
2Se,ec,'VCO,,,,O,O
t.R.]u.
T
TIMER
PR(_GRAMMING
PICTURE
CONTROL
Press MENU button repeatedly
to point to "USER'S SET UP".
1 Select "USER'S SET UP"
Then, press SELECT button.
SeectH
I--ss0tu
Press CH • or • button repeatedly until [HIFI] appears..
_1.
ii iiillll
:-,
_
"_,,,,,_,O,-OCN
USE.'SS_U,
I, CAPTION
-.EOFF]
RU,,DEX
SEA,CH
CHANNEL
SET
LANGUAGE
UP
[ENGLISH]
11ME S_CH
_g'd_
°°E
REPEAT PLAY
lb.
VCRAUO,OAO'O"ETURR
"IV AUDIO
(ST_E
,,, ! .....
2
, ;
...........
4 Exit the VCR audio setting
Select "TV AUDIO"
Press MENU button repeatedly
to point to "TV AUDIO".
Press MENU button repeatedly until the TV/VCR returns to the TV mode.
Press CH • or • button repeatedly until [STEREO], [SAP] or
MONO] appears.
....
__
__
_E,E,,RLA_
AUTORE_RN
"_,_'_P'°
.
iii
4 Exit the "IV audio setting
Press MENU button until the TV/VCR returns to the TV
mode.
- 13 -
EN
6F18
For the first time you may want to select language (English or Espafiol=Spanish)
and preset the tuner to scan
only the channels you receive in your area. You must
use the remote control for the following steps.
NOTE: Channel memory programming
is not needed
when using a converter/descrambler
box.
The channels you no longer receive or seldom watch can
be deleted from the memory. (Of course, you can add
the deleted channel into the memory again.)
1
1
power cord into a stand-
Then,UP".toPress
point
MENU
pressto SELECT
"CHANNEL
button button,
repeatedly
SET
Turn on the TV/VCR
2
Press POWER button to turn on the TV/VCR.
3
Select
Select "ENGLISH"
"ENGLISH"
or
- =TUP-
(
select "ADD/DELETE
[" *_"__*.0._
T,M__.A._L_,**_T,O._'._U.__._
.... -_A.O.
_..*._.O0_.M.,._
_*LO_O0.m_
_'U.
tO_e
_'_T
"_,_.j
0_
0]
CH"
Press MENU button repeatedly
to point to "ADD/DELETE CH".
Press SELECT button.
or "ESPAI_IOL"
• or,,V button or SELECT button.
t ]" marks indicateusing
the CH
se"ESPAlqOL=Spanish"
lected language.
W/CAW
AUTO
[ lV
-
I
PRESET
ADD / DELETE
II_
CHANNEL
CH
6ET
UP
-
AUTO PRESET
L"
=;,oE
3
t,ANQUAGE
IENGLISH]
Press MENU button to point to
"AUTO PRESET".
AUTO
II=-
ESPA_OL
PRESET
-
Then press SELECT button.
The tuner scans and memorizes
all the active channels in your area.
NOTES:
_ET
ADD_ELETE CH
08
{W)
UP -
4
• The TV/VCR distinguishes
between
channels and CATV automatically.
Enter the desired channel number
Press CH • or • button repeatedly or number buttons on the remote control until your desired
channel number appears. (Example: CH8)
4 Begin auto preset
standard
TV
Delete (or add) it from (into) memory
Press ADD/DELETE
button. The channel
number
changes to light red. The channel is deleted from memory.
• To delete another channel, repeat steps [3] and [4].
• If you want to play or record a video tape BEFORE
presetting the tuner, you must press MENU button.
To preset the tuner again, see "AUTO PRESET
AGAIN".
5
"CHANNEL SET UP"
Connect the TV/VCR power cord
Plug the TV/VCR
ard AC outlet.
2
Select
• If you press the ADD/DELETE
channel is memorized again.
button
again,
the
Added channel is In light blue.
Deleted channel is in light red.
After scanning
The tuner stops on the lowest memorized
channel.
(TV mode: from CH 02/CATV mode: from CH 01)
5
Exit the channel setup mode
If you want to recall the selected channels, you can select the desired channel directly with the remote control
number button or CH • or V.
Press MENU
TO RETURN
SCANNING
• To confirm that channel(s)
press CH • or • button.
TO TV MODE
WHEN
Press MENU button in scanning mode.
button to return to TV mode.
NOTES:
• You can not operate
(AUX) mode.
- 14 -
has been deleted or added,
this function
in external
input
EN
6F18
1
Select
"CHANNEL
SET
Select this feature and the TV/VCR's clock automatically will advance one hour in April, then reverse one
hour in October.
P'C_"EPROG_'RoLN_When Daylight-Saving
Time is ON, the clock will
USER'S SETUP
change
automatically
as
follows:
LANGUAGE [ENGLISH)
I" CAPTION
- M[OF,el
E. u_MESEA,_H
INDEXSEARCH
• First Sunday of April : from 2:00AM to 3:00AM
UP"
to point to "CHANNEL SET
UP".
Press MENU button repeatedly
Then, press SELECT button.
SETTING
CHANNEL
CLOCK
SET UP
(summer time): When programmed recording starts
between 2:00AM - 2:59AM on this day, the TV/VCR
will start recording at 3:00AM.
2 Select "TV" or "CATV"
/
Select [TV] or [CATV] using CH
• or • button.
AUTOPRESET
#
ADD / DELETE
II
• Last Sunday of October : From 1:00AM to 2:00AM
When programmed recording ends between 1:00AM
- I:59AM on this day, the TV/VCR will stop at
2:00AM.
%/
CH
|
J
Make sure ....
3 Begin auto preset
• Press POWER button to turn on the TV/VCR.
Press MENU button to point to
"AUTO PRESET".
W/CATV
AUTO
Then, press SELECT button.
The tuner scans and memorizes
all the active channels in your
area.
• You must use the remote control for the following
steps.
[ i%' ]
PRESET
ADD / DELETE
CH
1
Press MENU button repeatedly
to point to "SETTING
CLOCK"•
4 After scanning
The tuner stops on the lowest memoriZed'channeL
(TV mOde: from CH02 / CATV mode: from CH01)
Then, press SELECT button.
Press MENU button repeatedly
GUAGE".
III
i
I
I
I
I
II111
Press MENU button repeatedly
to point to "D • S • T" •
to point to "LANIm
'rIMER
using
CAPTION
INDEX
.__
[ _ ]illUill
i
I I
iii iiii i
Press CH •
PROGRAMMING
SET
C
button
repeat .....
r.... "',,::
edly until [ON] appears,
UP
I
or •
[ON]
AUToCL_CH
_,
,=,u^LCL_sET,
, o.,.,.
._f_-
Saving Time)to [ON]
_,E_T,o_
_ER's_-,,,,
,,
LANGUAGIr_ElqGLISH] m
[. _ESEA_C_
- "_"Ut"**
. S_,,SCLOCN")
AUTOCLOCK
3 Set "D.S.T." (Daylight-
_I"_ING _.OCN
CHANNEL
or
(
l
2 Select "ENGLISH" or "ESPANOL" '
"ESPAIqOL= Spanish"
CH • or • button.
Select
"ENGLISH"
fl_
TIMER
PROGRAMMING
PICI1JRE
CONTROL
SETTING
CLOCK
CHANNEL
SET UP
USER'S
SETUP
LANGUAGE
_NGLISH]
CAPTION
[O_F]]
-MENUTIME
SEARCH
INDEX SEARCH
2 Set "D.S.T." (Daylight-Saving Time) to [ON]
1 Select "LANGUAGE"
tl
Select "SETTING CLOCK"
.....
• ....
t ....
_._
1
4 Exit the Daylight-Saving Time mode
Press MENU button repeatedly until the TVNCR return
to the TV mode.
SEARCH
i i1
3 Exit the Language mode
Press MENU button repeatedly until the TV/VCR returns to the TV mode.
TO CANCEL
TIME
THE DAYIJGHT-SA
VING
q
Repeat steps [1] to [3]. Then, press CH • or • button
until [OFF] appears and press MENU button to return
to TV mode.
- 15 -
EN
6F18
Ji
;
i,i
2 Set "AUTO CLOCK" to [ON]
Press CH • or • button repeatSet the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is
available in your area, follow "AUTO CLOCK SETTING". If it is not, follow "MANUAL CLOCK SETTING".
,i.,
edly until [ON] appears.
,U,OCLOCKAUTOCLOCKOH
t_
II*
.....
_
MANUAL
CLOCK SET
- SEI"rlNG
CLOCK -
D.ST,
[OFF]
3 Enter the channel number for the PBS station
Press MENU button.
A UTO CLOCK
,SETTING
Then press CH • or • button repeatedly until the channel number for your local PB S station appears.
CTA ,%,,J
OC's
If you do not know the PBS channel number, remain on [AUTO].
The TV/VCR will automatically search all available
channels for the local PBS station, and will select that
channel.
AUTO
You can have the TV/VCR set the clock automatically
by using the Public Broadcasting Station (PBS) channel
in your area. Once you have set the clock by using the
following procedure, the TV/VCR will automatically
monitor the correct time and date being broadcast by the
PBS station in your area, using a new service called Extended Data Service (XDS).
II_
-
CLOCK
SETTING
[_:_]
CLOCK
]
-
4 Exit the Auto Clock Setting
Make sure ...
• Press POWER button to turn on the TV/VCR to set
the Auto Clock to ON.
Press MENU button repeatedly until the TV/VCR returns to the TV mode.
5 Turn off the TV/VCR
• Confirm that the antenna connections are correct.
• The cable converter box must be turned on if your
TV/VCR is connected directly to it. (See NOTES:)
• You must use the remote control for the following
steps.
NOTES:
• Auto clock setting only has to be done one time. You
may set the clock only if the clock's time has become
incorrect for some reason.
• If the TV/VCR is connected directly to a cable converter box, the local PBS station must be selected on
the cable box itself, and the TV/VCR must be set to
the output channel of the cable converter box (usually
channel 3 or 4), to be able to set up or correct the
clock automatically.
The TV/VCR cannot control the channels of the cable converter box.
Press POWER button to turn off the TV/VCR for searching the local PBS station. The power must remain off
during this search.
If you enter the channel number manually,
• It may take a few minutes for this search to be completed.
If you choose [A UT01,
• The TV/VCR must search through all the available
channels one by one, starting with the lowest numbered channel. It must scan each channel for a couple
of minutes to determine if that channel is transmitting
the XDS signal, because the PBS station will send
this signal only once every minute. This search could
take up to 2 hours if the local PBS station is on a high
numbered channel in your area or on your cable system. You may want to start this channel search at
night when the unit is not in use.
If the time that is automatically set by this selected
PBS station is incorrect, it may not be your local PBS
station, but one from a different time zone. Or there
is a possibility that no channel in your area is broadcasting the XDS signal, as evidenced by no time being set even after an overnight search. In these cases,
you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto
Clock Setting feature.
1 Select "SETTING CLOCK"
eete'y
I----o
l
to point to SETTING CLOCK .
Then, press SELECT button,
,,C,_HE
eO_,ROL
o_,s_Tu,
SETTING
CLOCK
CHANNEL
SET
UP
LANGUAGE
[ENGLISH]
CAPTION
[CAPTION1
]
TIME SEARCH
INDEX SEARCH
-16-
EN
6F18
,VIANUAL
CLOCA
SI,_I'IING
Make sure ...
• You must use the remote control for the following
steps.
• Power must be turned on.
In the example below, the clock is to be set to:
DATE
March 1st, 1996
SETTING TIME
5:40PM
......
£
to point to "SETTING CLOCK".
Then,
press SELECT
Press MENU
button button.
repeatedly
SET
(
7
AUTO CLOCK
[ONI
m,ocLOC_c,
i_q_
M,_u,_
c_o_SET
Then, press SELECT button,
os,
imr
I
R
j II
-
Press CH • or • button repeatedly until your desired day appears. (Example: "01" for lst)
8
i
i,i
DAY
! 01
YEAR
FRI
1905
_lm05
_'1% m
-IPM
'_l
'%
m
MANUAL
MONTH
03
CLOCK
DAY
/
O1
SET
-
YEAR
FRI
1096
HOUR
_.E
o5._,=o,,
Start the clock
Although seconds are not displayed, they begin counting from
00 when you press MENU or SELECT button. Use this feature to
synchronize the clock with the
correct time.
MINUTE
MANUALCLOCK
M_rm_
tll__
SET
-
• This unit has a built in calendar up to the year 2010.
YEAR
s_ ,,}ol¢- ......
HOUR
MH_TE
TO CHANGE
Then, press SELECT button.
r'
Press CH • or • button repeatedly until the desired minute appears. (Example: 40)
" • -
button.
Select the day
tl
0S
Press MENU or SELECT button.
Press CH • or • button repeatedly until your desired month appears.
(Example:
"03" for
March)
_i
._
Select the minute
to_
3 Select the month
I
:;
- MANUALCLOCKSET MONTH
-
-S_',"_OLOCK-
to point to "MANUAL CLOCK
SET".
,,.i,
i r i ii iiiiiii
SEARCH
2 Select "MANUAL CLOCK SET"
Press MENU button repeatedly
i
UP
CAPTION
CAPTION1J
TIME SEAI_CH
INDEX
4
I
PROGRAMMING
CHANNEL
Then, press SELECT
I
Press CH • or • button repeatedly until your desired hour apS_,NOP'C'°"E
CONTROLcLocK
pears. (Example: 5, PM)
LANGUAGE
......[ENGLISHI
I" USE_'
......
Then, press SELECT button.
T_MER
,,,H
iii I
6 Select the hour
1 Select "SETTING CLOCK"
CLOCK SETTING
If you want to change the clock,
ii
I
5 Select the year
- MANUALCLOCK SET -
PressCH • or • button repeatedly until your desired year appears. (Example: 1996)
MONTH
S3
HOUR
1) Follow steps [1] and [2].
2)' Select a digit you want to change using SELECT button or ADD/DELETE button.
DAY
/ 01
3) Enter correct numbers using CH • or • button.
4) Press MENU button to start the clock.
Then, press SELECT button.
HINT!
....
-_
_"
If there is no local PBS station in your area or on your cable system, in step 2 above, select "AUTO CLOCK" and
press CH • or • button to show [OFF], then adjust clock manually.
- 17 -
EN
6F18
ON
m
SCREEN
DISPLAY
,,,,
To check the Counter, Clock and Channel number on the TV screen, press SELECT button on the remote control.
Each time you press the SELECT button on the remote control, the TV screen will change as follows:
When the Closed Caption mode is OFF:
OFF mode
• In the Counter mode, after 5 seconds,
only the counter remains. To clear it,
press SELECT button.
• In the Clock mode, after 5 seconds,
only the clock and the channel number
remain. To clear them, press SELECT
button.
Counter mode
Clock mode
P
CH2
I1_
!
!
STOP
I
8P
I
I
r:
COUNT
0:12:34
P
.+
J After 5 seconds
J After 5 seconds
5:40PM
CH2
COUNT
T
_
When the Closed Caption mode is ON:
0:12:34]
Counter
remains
remains
Clock & Channel
OFF mode
Clock/Counter mode
• The On Screen Display will disappear after 5 seconds.
• This is true even if MUTE button is pressed, or
PAUSE/STILL button is pressed while recording.
However, the On Screen Display will appear for 5
seconds when SELECT button is pressed.
,
CH2
J
SPECIAL
FEATURES
I]
Magnetism from nearby appliances
color of the TV picture.
might affect the
If this happens, move this unit away from the appliance.
If the color is still not correct, disconnect power cord
from AC outlet then reconnect it after 30 minutes.
Ilfll
III
IIi
,J
"KII
II
|1
• When the end of a tape is reached during recording,
playback, or fast-forward, the tape will automatically
rewind to the beginning, power off and tape ejects.
• This function is operative
set to the [OFF] position.
only when Repeat
• The tape will not auto-rewind
or One Touch Recording.
Play is
during timer recording
• When the tape is rewound to the preset memory position of the Counter Memory during Auto Rewind,
the tape will stop, but the tape will not eject and
TV/VCR will not turn off.
- 18 -
EN
6F18
i _ _)lq_KAiJON
The TV/VCR's
picture controls - BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS
- are preset to the factory specification.
This is usually best, but
if you need to make any further adjustments adjust picture controls for a natural looking image.
NOTES:
1 Turn on the TVNCR
Press POWER button to turn on the TV/VCR.
2 Select the channel number
CH 06
Press CH • or • button to select
your desired channel number.
• Procedures must be followed within 5 seconds. Otherwise the Picture Control mode will be cancelled.
• When setting the Picture Control, the Game mode
will be automatically set to [OFF].
3
Make sure ...
Adjust the volume
• You must use the remote control unit for the following steps:
Press VOLUME &or • button
to adjust the volume.
VOLUME 20
1 Select "PICTURE CONTROL"
lllnlnuunooun
to point to "PICTURE
TROL"
This function enables you to adjust the TV scrccn making it suitable for use with a TV GAME.
TIMER
SETTING
CLOCK
CHANNEl.
SETUP
USER'SSET
UP
LANGUAGE
ENGLISH]
CAPTION
_C_PTION
11
INDEX
-, _NUoN
SEARCH
2 Select item you want to adjust
Press SELECT button repeatedly until desired control is
displayed.
(
Each time you press SELECT _
:::i"
PROGRAMMING
Press MENU button repeatedly
_-_,_'Cr_R_
_ONTR_
C_O_X
to point to "USER'S SET UP".
, ,. C._NE_.OPU_R,S
GET
OP
1 Select"USER'S SET UP" I
-"E_UThen, press SELECT button.
_.ESEA&.
LANGUAGE
CAPTION
INDEX
_RP"OQ"_,._.,e_UR_ON_RO_
Press MENU button repeatedly [,_
Then, pressSELECT button ........
Make sure ...
• You must use the remote control unit for the following steps:
CON-
•
[ENGLISH]
CAPT[ONI
]
SEARCH
button,
"CONTRAST". "BRIGHT",
"COLOR". "TINT"
and "SHARPNESS" will appear
/
=' ' :'
_,-',
L-_'=_-_'
on the TV screen in sequence.
•
2 Set "GAME MODE" to [ON]
Press CH • or • button repeatedly until [ON] appears.
3 Adjust the picture control
- _E_'__ o,REN_A_a'_E"_E
REPEAT
PLAY
AUTO RETURN
VCR AUDIO
3V AUDIO
OF
HIFI
CH •
O]
Press MENU button repeatedly until the TV/VCR return
to the TV mode.
THE
GAME
..,
Press CH • or • button to adjust the pici_i-_'e0htrol to
your desired level.
3 Exit the Game mode
TO CANCEL
,_
MODE
CH •
BRIGHT
to decrease
brightness
to increase
brightness
CONTRAST
to decrease
contrast
to increase
contrast
COLOR
to pale
to brilliant
TINT
to purple
to green
SHARPNESS
to soft
to sharp
Repeat step [1]. Then, step [2] to select [OFF]. Press
MENU button repeatedly to return to TV mode.
- 19-
EN
6F18
_rlr'nllrn!l
iiiiii,
i
II IIIIii
/ _/
1 Select "CAPTION"
Press MENU button repeatedly
to point to "CAPTION".
You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue
caption or text display added to the program.
TIMER PROGRAMMING
PICTURE
CONTROL
SETTING
CLOCK
CHANNEL
SET UP
USER'S SET
P
LANGUA_IE
_i_LISH]
IIp
CAPTION mode:You may watch dramas, movies and
news etc. while captioning the dialogues and the contents of news if you want by choosing the caption
mode.
CAPTI_J!_
-MENU- OFF i
INDEX
SEARCH
2 Select your desired caption menu
TEXTmode:You may watch full screen text information if you want by choosing the text mode.
PressCH • or • buttonrepeat- f
......
ll2:You may get these captions or text information by
selecting either "l" or "2". "2", when used, will usually be for a second language.
menu appears.
¢"*NNELusE.,S
SET
"ET
o_
_
t._GU^G_IblEI_L_,I_I
edly
([CAPTION1].
until your desired
[CAPTION2]...ES[_.C"_'G
caption It ....P,OTU.EPROGoO.T.OL
......
.,o_,,.•
[TEXT1] or [TEXT2])
,.o_xs
.....
SETnNG
]
CLOCK
3 Exit the caption setting mode
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free closed
captions from high quality antenna, cable and VCR signals. Conversely, poor quality signals are likely to result
in caption errors or no captions at all. Common signal
conditions which may cause captions errors are listed
below;
a. Automobile ignition noise.
b. Electric motor brush noise.
c. Weak snowy picture .....
d. Multiplex signal reception displaying picture ghosts
or airplane flutter.
e. Playback of poorly recorded or worn VCR tapes.
f. If the TV/VCR displays a black
box on the TV screen, this
means that the TV/VCR is set
to the TEXT mode. To clear
screen, select [CAPTION1],
[CAPTION2] or [OFF].
Press MENU button repeatedly until the TV/VCR returns to the TV mode.
TO CANCEL
SYSTEM
THE CLOSED
CAPTION
Repeat steps [1] and [2], select [OFF] using CH • or •
button. Press MENU button repeatedly to return to TV
mode.
WHEN THE CLOSED
IS ON
CAPTION
MODE
The On screen Display will disappear after 5 seconds.
• This is true even if MUTE button is pressed, or
PAUSE/STILL button is pressed while recording.
However, On Screen Display will appear for 5 seconds when SELECT button is pressed.
Make sure ...
• You must use the remote control unit for the following steps.
* Power must be turned on.
[
•
,
• ;_ ,
.
- 20 -
EN
6F18
t)I NiAI.,
PI..,AY BACK
Make sure ...
- PICTURE SEARCH
• Power must be turned on.
i
This feature is useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be
muted.
!
1) You may view a video tape at ahigh speed in either
a forward or reverse direction by pressing F.FWD or
REW button. (in the SP / LP / SLP modes)
tl:!
1 Insert a prerecorded tape
If the erase-protection
tab has been removed,
TV/VCR will start playback automatically.
the
2) Depress it again. The TV/VCR will now search in
super high speed. (in the LP / SLP modes)
3) For normal speed, simply press PLAY button.
Press PLAY button.
STILL PICTURE
Press STOP button when playback is completed.
,
You can view a still picture on the screen during playback (the Still mode). Press PAUSE/STILL button during playback.
Press PLAY button to return to playback.
NOTE:
• If it is left in the Pause mode for more thaff five minutes, the TV/VCR will automatically switch to the
Stop mode.
_.
_....
. ::
t
TRACKING ADJUSTMENT
[
• Tracking adjustment will be set automatically (Digital Tracking function-DTR) when you start playback.
SLOW MOTION
NOTE: The following function is controlled only by the
buttons on the VCR.
Press SLOW button to reduce the playback speed. The
VCR mutes the sound during slow motion.
• When playing pre-recorded tapes or tapes recorded
on units other than your own, noise lines (black and
white streaks) may appear on the playback picture. If
this occurs, you can adjust the tracking control manually by pressing CHANNEL • or • button until the
streaks disappear. To return to the DTR function,
stop the tape once and start playback again.
• You can reduce the noise lines by pressing CHANNEL • or • button in slow mode, too. Slow tracking
adjustment will not be set automatically.
Note: In Still mode, press SLOW button and press
CHANNEL • or • button until the streaks disappear. To return to Still mode, press PAUSE/STILL
button again.
Press PLAY button to return to normal playback.
- 21 -
?
i
;
:
EN
6F18
_J'J_LIAL
Make
J'J_A_i
sure ...
J_AL_
• Power must be turned on.
• You must use ttae _cmote control for the following
steps.
• Insert a prerecorded tape.
• Before playback, follow steps below.
This function enables you to improve the picture quality
when playing back worn cassettes such as those rented
from a video shop.
ALL REPEAT:repeat playback from the beginning to
the end of the tape.
1 Select "USER'S SET UP"
Press MENU button repeatedly
to point to "USER'S SET UP".
Then, press SELECT button.
i, ,
The TV/VCR has an auto repeat function that allows you
to repeat a tape indefinitely without using the PLAY button. There are two selections for Auto Repeat Playback.
_MER
PROGRAMMING
pICTURE
CONTROL
_'I"TI
BLANK REPEAT:repeat playback from the beginning
to the blank part, which has no more than 10 seconds,
of recorded information.
CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE
ENGLISHI
CAPTI_
[CAPTION
1]
TIME SEARCH
INDEX SEARCH
H,,,H,,H,I
II
lil ll
_
NOTE: No buttons except POWER and STOP buttons
will work during Repeat Playback. Always set the Repeat
Playback to [OFF] when this function is not being used.
i
2 Set "RENTAL" to [ON]
- USER'S SET UP -
Press MENU button to point to
"RENTAL".
1 Select "USER'S SET UP"
TIMER
PROGRAMMING
PICTURE
CONTROL
SEI"rlNS
CLOCK
CHANNEL
SET UP
Press MENU button repeatedly
to point to "USER'S SET UP".
Press CH • or • button repeatedly until [ON] appears.
U_R'S
SET UP
LANGUAGE
ENGLISHº
CAPTION
-MENU[C_PTION
1]
IF
Then, press SELECT button.
3 Exit the Rental setting
Press MENU button repeatedly until the TV/VCR returns to the TV mode.
4 Start playback
Press PLAY button to start playback.
PLAY•" appears.
2 Select "ALL" or "BLANK"
Press MENU button repeatedly
to point to "REPEAT PLAY".
THE RENTAL
RE_'_'_
°°E ".t_* 1
,CRAOD,O
"1
Press CH • or • button repeatedly until your desired selection
[ALL] or [BLANK] appears.
"RENTAL
• Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.
TO CANCEL
TIME SEARCH
INDEX SEARCH
,ooo'-;3
f
- USER'S SET UP -
3 Exit the Repeat Play setting
Press MENU button repeatedly until the TV/VCR returns to the TV mode.
MODE
111
Repeat steps [1]. Then, follow step [2] but select [OFF].
Press MENU button repeatedly until the TV/VCR returns to TV mode.
_
]
Ill
Ill
I
]
ii
_
4 Start playback
Press PLAY button to start the Repeat Play. "RI_PEAT
PLAY •" appears.
• Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
• If the Rental mode is set to [ON], the "RENTAL
PLAY•" display has priority.
TO CANCEL
THE REPEAT
PLAY
MODE
Press STOP button to stop playback. Repeat steps [1],
then follow step [2] but select [OFF]. Press MENU button repeatedly until the TV/VCR returns to the TV
mode.
- 22 -
EN
6F18
Make sure ...
• You must use the remote control for the following steps.
• Power must be turned on.
• Insert a tape.
This feature can be used to memorize a beginning point
that you want to review. And you can search for it easily
by rewinding or fast forwarding.
NOTES:
• If the All Repeat or Blank Repeat is set to [ON], the
Counter Memory function does not work.
IIII !
I
I_
I
ii
=
iiiiiiii
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point
at which you want to review.
The Time Search function makes it possible to quickly
advance the tape to your desired position from any position by entering the exact amount of playback time of
the part that you want to skip.
NOTES:
• Time Search is setup to 9 hours 50 minutes (9:50)
byl0 minutes at a time.
• This function is not operative in recording mode.
• Counter Memory function is not operative in this
mode.
• This function is not operative when a Cassette tape is
not inserted in the TV/VCR.
2 Reset the counter to 0:00:00
Press C'. RESET button repeatedly....
In the example below: To watch a program after 2 hours,
50 minutes from present position, in either direction.
3 Select the Counter Mem-
I I
i,I
II
I
I I
I I
IIIIIIIII
1 t
_
.E.o_
0_o:®
toPressPress
point
OR
TIME
MENU
to "TIME
SEARCH
button
SEARCH".
repeatedly
button
JiIH
.
1
1 Select "TIME SEARCH" mode
ory mode
Press C. MEMORY button so
that "MEMORY" appears on the
TV/VCR screen.
I" _E"_=_s_Rc,c._N,_
,_o_xc,_r,oN_,,o_,oEo_,ss_oP_--,,,o,,ero_
"sE,_.
P_o_,,_,,o
_o_o__=td_r,o_,_
_s_,
"E_,_J
oP
o1
Then, press SELECT button.
IJJIIJ,II
4 Begin recording or playback
2
Press REC or PLAY button.
Press STOP button when recording or playback is completed.
..........
:
i
i
i i
.
5 To activate the Counter Memory
Press REW (or F.FWD) button. The tape Will automatically stop when the counter returns to 0:00:00.
TO CANCEL
THE COUNTER
First press C. MEMORY to display the counter on the TV/VCR
screen. Then press C. MEMORY
continuously
until
"COUNT" appears.
MEMORY
Enter your desired time
Press CH • or • button repeatedly until your desired time appears. (Example: "2:50" for 2
hours 50 minutes)
3 Begin Time Search
Press REWIND or EFWD button. The tape will move
to the specified point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback automatically.
TO CANCEL
COUNT
O:_):OO
THE
TIME
SEARCH
• While the Time Search is in progress:
Press
STOP/EJECT button on the TV/VCR or the remote
control. This will delete the selected time.
• While setting:
- 23 -
Press MENU button.
EN
6F18
1
Select
"INDEX
SEARCH"
mode
Press MENU button repeatedly
to point to "INDEX SEARCH".
This feature provides a method of indexing the starting
point. And you can easily search the index mark in either
fast forward or rewind direction.
Then, press SELECT button.
IIP
NOTES:
• The index mark will be made automatically When the
REC button is pressed. It will also be marked at the
starting point of Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL
button is pressed and released during recording.
,,,,,
,
TtMER PROGRAMMING
PICTURE
CONTROL
SETTING
CLOCK
CNANNEL
SET UP
USER'S SET UP
LANGUAGE
ENGUSHI
CAPTION
IC_PTION1]
-MENUTIME SEARCH
INDEX SEARCH
,,,,
2 Enter your desired number of program that you
want to skip
PressCH • or • button repeat- (,N=_XSE_.
edly until your desired number of I-S°_ _"
program that you want to skip is
appeared. (Example: To skip
three programs)
• The time gap between making the index marks on the
tape should be greater than 1minute for SP recording,
2 minutes for LP recording and 3 minutes for SLP
recording.
• Index marks cannot be made if the erase-protection
tab on the cassette has been removed.
L
3 Begin Index Search
• Index search can be set up to 20.
Press REW or EFWD button.
The TV/VCR begins rewinding
or fast forwarding then goes into
the Play mode at the beginning
of desired program.
• This function is not operative in recording mode.
• Counter Memory function is not operative in this
mode.
• You must use the remote control for this procedure.
NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one.
Make sure ...
• Power must be turned on.
• Insert a tape.
In the example below: You are watching fourth program (progrm number 4) and want to fast forward to
seventh program (program number 7). You must skip
three programs.
CURRENT
PLAYBACK
Beginningof tape
2
!
1
End of tape
1
When the preset program is reached, normal playback
will start.
PROGRAM
I Pro.11
Pro.21P,o.3Pro.
[Pro.6
[Pro.7
I
• r4
3
INDEX MARK
4 After Index Search
2
3
TO CANCEL
THE INDEX SEARCH
• While setting: Press MENU button.
• While the Index Search is in progress: Press
STOP/EJECT button on the TV/VCR or the remote
control. This will end the Index Search.
- 24 -
EN
6F18
RECORDING
I
Ill
I
I
I
I I i l
I
I
Make sure ...
• Power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the
point at which you want to begin recording.)
• You must select the recording mode in STEREO, SAP or MONO when you record a broadcast.
Refer to "TO SELECT STEREO, SAP OR MONO MODE" on page 13.
You can only watch the same TV program that is being
recorded.
1 Select the channel to be recorded
Press
PAUSE/STILL
or REtemporarily
stop recording.
The
CORD button to resume recording.
CH 101
:
button to
cp,usE
REC indicator blinks.
Press number buttons on the remote control or the CH • or &
button.
L--
Press PAUSE/STILL
l's....
'
NOTES:
To prevent tape damage, after five minutes, the
TV/VCR will automatically return to the Recording
mode.
_
When in the Pause/Still mode, a display showing 5
"l" marks will appear on the screen. Each "l" mark
represents one minute of Pause time. You may refer
to this display for remaining pause time available.
Press SPEED button to select the
desired
tape speed
(SP/LP/SLP).
2 Select
the tape
speed
3 Begin recording
Press RECORD button.
REC indicator flashes.
,
,
t
The
, "
I_*
1
[%_';
|
I
I
J
III
I[
I
If "CAPTIONI",
"CAPTION2",
"TEXTI"
or
"TEXT2" is selected, the On Screen Display will appear for 5 seconds, then disappear.
If you want to check the remaining pause time available using the On Screen Display, press SELECT
button. The On Screen Display will appear for 5 seconds.
I
4 Stop recording
Press STOP button when reco_rding is completed.
- 25 -
EN
6F18
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.
Make sure ...
Connect your TV/VCR and a Source (Playing) VCR using the following diagram.
• Power must be turned on.
[Connection
• Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
1}
::
[Editing(Recording)TVNCR]
NOTE:This function cannot be done by the remote control.
i|
i
•
i
....
1 Select the channel to be recorded
A
Press number buttons on the remote control or the
CHANNEL • or • button.
VCR ] _
Audio/Videoadaptercord
(notsupplied)
2 Begin OTR
i
TV/VCR as many times as
needed.
The recording
Press REC/OTR
button length
on the
will be determined by the number of times you press RECtOTR
button.
[Connection
I°_(2:_°)
_P
_
]
Display
1 push
J
III,u v l
(normal recording)
0:30
30 minutes
3 pushes
1:00
60 minutes
8:00
480 minutes
1) Insert a pre-recorded video cassette into the Source
(Playing) VCR.
,L
17 pushes
III III
(Playing) _\ _
VCR ]_
'
"
Audio/Video
adaptercord
(notsupplied)
Recording length
2 pushes
21
[Editing(Recording)TVNCR]
•
Each additional push will increase the recording time by
30 minutes. It is set up to 8 hours.
Push(es)
IDE
2) Insert a blank video cassette, or one you want to record
over, into the TV/VCR's cassette compartment.
HINTS:
• Recording starts immediately when the REC/OTR
button is pressed.
• When REC/OTR button is pressed 18 times, the
TV/VCR will switch to the Normal Recording mode.
• To stop the OTR operation, press STOP button onthe
TV/VCR or on the remote control.
• To show the remaining time, press SELECT button
repeatedly until "OTR" appears on the TV screen.
• Recording stops when 0:00 is reached.
• Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T- 160 (or 6 hours using T- 120).
• If the tape runs out before the end time, the TV/VCR
will switch to the Stop mode immediately, eject the
tape and the TV/VCR power will be turned off.
3) Press SPEED button to select the desired recording
speed (SP, LP or SLP).
4) Press CHANNEL • or • button repeatedly so that
"AUX" appears on the screen.
5) Begin playback of the tape in the Source (Playing)
VCR.
6) Press REC button on the TV/VCR.
NOTES:
• For best results during dubbing, use the TV/VCR's
front panel controls whenever possible. The remote
control might affect the Source (Playing) VCR's
playback operation.
• When you connect the monaural TV/VCR(another
source) to this TV/VCR, connect the Audio output
jack of the monaural VCR(another source) to the
AUDIO IN L jack of this VCR. The audio signal will
be recorded in both L and R channel equally.
- 26 -
EN
6FI8
IIMER
1 Select "TIMER PROGRAMMING"
Press MENU button to point to "TIMER PROGRAMMING".
You may set the TV/VCR to record while you are away.
You can set 8 programs to record on a specific day, daily
or weekly within a 1 year period.
In the example
• If you did not set the clock,
"MANUAL CLOCK SET"
appears. If so, follow page 17
to set the clock and repeat
from step [3].
below, the timer is being set to record:
DATE:
SETTING TIME:
CHANNEL:
TAPE SPEED:
PROGRAM NO.:
MAY 6th, 1996
from 7:30PM to 8:50PM
CH61
LP
4
LANGUAGE
[ENGLISH]
CAPTION
[CAPTION1 ]
TIME -MENUSEARCH
INDEX SEARCH
Ill*
The program number which is
not set up flashes
NOTE: You must use the remote control for this procedure.
Press CH • or • button repeatedly until your desired program
number appears. (Example: 4)
Make sure ...
• Be sure the clock is set to the correct time and date
before setting the timer.
• Power must be turned on to set automatic timer recording.
Press SELECT button.
.OG.'_ ._;3_1, kp
!
,_,1 I I
$TART
--:
....
ENO TIME
TIME
--
:....
CHITAP NNEL
--
E SPEED
--
•
3 Select once, every day or weekly recording
For once recording :
PROGRAM
Press CH • (up) button repeatedly until your desired
date appears.
(Example:
"05/06" for May 6th) Press
SELECT button.
...
There is a case that a program will not be performed.
when programs overlap;
• The program with the earliest start time has priority.
• When the earliest program has finished and the programs which should start still overlap, the recording
will start in order of the program number.
1"
I"OGRAM"UMSE_
! €. "
[OATE..... _*.n?,
/
a cassette tape with its erase prevention tab in
(If necessary, rewind or fast forward the tape
point at which you want to begin recording.)
the tuner.
Avoid over lap of programs
SETTING
CLOCK
CHANNEL
SET UP
USER'S SET UP
2 Select your desired program number (1-8)
.' !
• Insert
place.
to the
• Preset
TIMER PROGRAMMING
PICTURE
CONTROL
Press SELECT button.
rATE
[
N
4
_n nu_
5106MO
END TIME
--
CHANNEL
--
i "i'ART TIME
APE SPEED
---
Im
:
: ....
For every day recording : To record a TV program at
the same time on the same channel every day. (Example: Monday through Sunday)
• If you programmed as the illustration, the timer recording would be carried out as follows (shaded part
is the recording period) :
9:00AM - 10:00AM for PROGRAM 2
10:00AM for PROGRAM 1
PressCH•
(down) butt0nrepeatedly
until "EVERY
DAY" appears. Press SELECT button,
|DA,_-_E.nYiAV
4_A',ME .......
ENDT,ME
.......
c.......
[ '_APE SPEED
--
For weekly recording : To record a TV program at the
Program 1
same
!
I
I
i
Program 2
Program 3
'
I
n
9:00AM
IO:OOAM
time
on the same
channel
every Monday on channel
Press CH • (down) button repeatedly until "EVERY" and
your desired day of the week
appears together. Press SELECT button.
ple:
11:00AM
- 27 -
every
week.
(Exam-
7 at 5:00PM)
[5PROGRAMN
• _My"=,,4
I'
*n n n +,
I_sd'_'_E -_-_:-:-_I,,AN.....
U".........
DATE
ImEVERYSAT
lm
EN
6F18
m
10 Exit the program mode
4 Set start hour
Press CH • or • button repeatedly until your desired hour appears. (Example: " 7, PM" for
7:30PM)
Press SELECT button.
,rr,,"
I I IInnlIIInn,
I!
Press SELECT button. Program 4 is now completed.
DATE
05/06
M_
..... ..,0'7",."
"-pNO_ME
"--='_
--'--'-"
P_!AR
_RAM NUMBER
CLTCHANNEL
PIE SPEED
4
- _
- -
,
Press POWER button to set automatic timer recording.
The TIMER REC indicator lights up.
• You must turn off the TV/VCR to activate automatic
timer recording.
5 Set start minute
Press CH • or • button repeatedly until your desired minute
appears.
(Example: "30" for
7:30PM)
Press SELECT button.
DATE
PRO0
05106
RAM NUMBER
MON
4
If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" starts flashing on
the TV screen 2 minutes before the programmed start
time.
|ENO,%7
-,:,De
TAPE
_,"I_I SPEED
NEL
repeat steps [1] to [10].
11 Set the timer
•
i m
u
To set another program,
- _.
-
6 Set end hour
TO CORRECT
Press CH • or • button repeatedly until your desired hour appears. (Example: "8, PM" for
8:50PM)
Press SELECT button.
JHtliiiii iiiiiiiiii
DATE
START
05/00
TIME
ENDTIME
ROGRAM
.....
7:30
i
08
NUMBER
TAPE SPEED
4
PM
--
i
•
tJtt
7 Set end minute
Press CH • or • button repeatDATE
OB/OE
MI_
edly until your desired minute
I'_,T,ME *kYP'
appears.
(Example: "50" for
8:50PM)
PROGRAM N_ER
4
Press SELECT button.
TAPE SPEED
8
1
• After setting a program;
1) Press POWER button.
2) Repeat steps [1] - [2].
3) Press SELECT button repeatedly (or press
ADD/DELETE button to go back one step)
until a digit you want to correct flashes,
then make changes.
4) Repeat steps [t0] and [11].
TO CANCEL AN A UTOMA TIC TIMER
RECORDING
DATE
0510e
MON
8TART TIME
07:$0
PROGRAM
NUMBER
ENDTIME
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 36
Page Layout : SinglePage
Page Mode : UseNone
Producer : Goby Monitor Application version 3, 2, 1, 4
Create Date : Mon Apr 02 07:22:41 2007
Author :
Title :
Subject :
EXIF Metadata provided by EXIF.tools