HK ELECHOUSE ELECTRONICS TECHNOLOGY G141U GO2NFC141U NFC Reader User Manual Manual
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED GO2NFC141U NFC Reader Manual
Manual
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
GO2NFC141U NFC Reader
Mode: G141U
Overview
The GO2NFC141U NFC Reader is contactless smart card reader/writer developed based on the 13.56 MHz
Contactless (RFID) Technology. Unlike other NFC readers/writers, GO2NFC141U is very compact and
small.
GO2NFC141U is a plug-and-play USB device. It is compatible with different devices and applications.
Compliant with the ISO/IEC18092 standard for Near Field Communication (NFC), it supports not only Mifare
and ISO 14443 A and B cards but also all four types of NFC tags. It also could pushes or pulls data with
Android NFC phone. Although in a small size, the proximity operating distance of GO2NFC141U is 5 cm.
With an access speed of up to 424 kbps and a full USB speed of up to 12 Mbps, GO2NFC141U can also
read and write quickly and efficiently, depending on the type of contactless tag in use.
Software for GO2NFC141U is available for both Windows OS and Linux. Most important, the software is
open source, totally free for any changing and usage. The software contains operation function such as
reading/writing card, pushing URL to Android phone, pulling message from Android phone.
The GO2NFC141U NFC Reader is ideal for access control, e-payment, e-ticketing for events and mass
transit, toll road fare collection and network authentication.
Feature
GO2NFC141U Standard Features:
USB 2.0 Full Speed Interface
Smart Card Reader:
Read/write speed up to 424 kbps
Built-in antenna for contactless tag access, with card reading distance of around 50 mm (depending
on tag type)
Supports ISO 14443 Type A and B cards, Mifare, FeliCa, and all 4 types of NFC (ISO/IEC 18092)
tags
Supports pushing/pulling data with Android NFC phones
Very small size
User-controllable buzzer
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
Typical Applications
e-Government
Banking & Payment
Network Security
Access Control
e-Purse & Loyalty
Transportation
Technical Specifications
Dimensions
46.0mm (L) * 48.5mm (W) * 10.5mm (H)
Weight
20 g (without USB cable)
Interface
Micro USB socket
Operating Distance
Around 50 mm (depends on the tag type)
Supply Voltage
Regulated 5V DC
Supply Current
100mA (Maximum); 15mA (standby); 40mA (normal)
Operating Temperature
0-50 °C
Operating Frequency
13.56 MHz
Smart Card Interface Support
ISO14443 Type A & B
Mifare
FeliCa
4 types of NFC (ISO/IEC18092) tags
Operating System Support
Win XP, Win Vista, Win 7, Win 8, Win XP x64, Win Vista x64,
Win 7 x64, Win 8 x 64
Linux
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
Architecture
Software
Users could download the software through the following link:
http://www.go2nfc.com/download/
Mobile phone users could scan the following code.
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
.
Operation Guide
Windows
Connect GO2NFC device with your computer with micro USB cable. Install the driver from “Device manager”.
You could find the “DRIVER” folder which contains the driver in the software files. If the driver was installed
well, you could find a COM port for this device.
Start the software “gnfc.exe”
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
Click the button “Refresh”. The software will find the COM ports available. Choose the right COM port and
then click “Open”. Information will be shown at the bottom.
Read card information
Click the button “ReadID”.
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
Put a valid card on the device. You could get the card ID.
Check the “VERBOSE”. It could read back more information.
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
Read/Write the data stored in the card
The following buttons controls data reading or writing
To write/read data into the card, you need to read the data structure of the card.
Choose the Block/Sector you want to operate.
Put a valid card on the device. Then click the button “ReadBlock”.
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
Click the button “WriteBlock” and pop up new dialog
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
In the new dialog, users could read or write data.
Block 3 is usually used to store password. Becareful if you want to write it.
NFC with Phone
The software also contains function to push/pull URL with phone.
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
Within 5 seconds, put your phone on the device.
On the phone, the browser would room in. Click it. The URL in the browser would be pushed to the software
on PC.
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
Input an URL (such as www.google.com) in the text box behind the button “Push”.
Click the button “Push”. Put a phone on the device. The browser would pop up and open the website.
Linux
QT5
1. Download qt-linux-opensource-5.x.x-x86-offline.run
2. sudo chmod +x qt-linux-opensource-5.1.1-x86-offline.run
3. ./qt-linux-opensource-5.1.1-x86-offline.run
4. next...next...next...
libnfc
so far, pn532_net driver is not included by libnfc, checkout JiapengLi/libnfc instead, by which net driver
is included. To use net driver specify a device name like "pn532_net:192.168.1.1:8000".
autoreconf -vis
./configure --with-drivers=pn532_uart,pn532_net --sysconfdir=/etc --prefix=/usr
make
sudo make install all
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
libfreefare
autoreconf -vis
./configure --prefix=/usr
make
sudo make install
libllcp
autoreconf -vis
./configure --prefix=/usr
make
sudo make install
libndef
qmake
mingw32-make
lib files locate at libndef/libndef/release/, named libndef1.a and ndef1.dll, libndef/include/*.h is also
needed.
FCC Compliance statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject of the following two condition:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Caution:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
HK ELECHOUSE ELECTRONICS TECHNOLOGY CO., LIMITED
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.