HK Tech Science and Technology HKFX22C WiFi Camera User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3777777
Application ID	/c5kirWoF2oVMJ384NwwUg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	267.95kB (3349367 bits)
Date Submitted	2018-03-13 00:00:00
Date Available	2018-03-13 00:00:00
Creation Date	2018-03-05 11:24:47
Producing Software	GPL Ghostscript 9.07
Document Lastmod	2018-03-05 13:49:43
Document Title	1
Document Creator	FreePDF 4.14 - http://shbox.de
Document Author:	kwan

0 Intelligent Hovering
0 Intelligent Following
e Headless Mode
0 One Key Flip
e 720P Wide Angle HD Camera F
o High-precision Adjustable X-
Steering Gear
0 Lowipower Auto Return
I Beyond Control Distance
Auto Return
WWW@9@@9@
6-Axis Gyro System 2.4GHz 5Channe| 360°F|ips
Please read the Instruction Manual cereflllly betnre using.
Please keep Moryourmrlher reference.
1.PRODUCT CONFIGURATION
Blade 3 X2 Holder X1
é»; an
AC Adaptor X1 Protection Frame X4 SUCW driver X1 Card Reader X1
‘F it 1:»
Phone Holder Screw X2 Protection Frame Screw X14 V
2.TRANSMITTER
2.1 Introduction of Transmitter
Power switch
Transmitter X1
Instruction
Manual X1
Speed Switch
Ascend I Descent! /
Turn Left / 'lum Right Inditator 2
Press dawn to
start headless mode [gmglfamfmg‘r‘d "y
Camera Steering Press d%wn ¢ Direction
Angle ’+ for 360' flip
’ ‘ One Key Return
Take Videos
Trimming switch
Indicator 1
One Key Take Dfl/
Landing] Emergency Stop
Take photos Camera Angle '-‘
2.2 Install Batteries
Open the battery compartment Put in 4 AA battenes with Cave! the battery compartment
by loosening the screw on the (erred directions. and get it ragened with mew.
(over with a screw driver. ,
3. INSTALLATION PARTS 4. CHARGING OF THE QUADCOPTER BATTERY
' Please fully charged the quadcopter battery before flying. Open the battery
3'1 Installation Of Smartphone Holder door and take out the battery from quadcopter. Plug the AC adaptor into
electricity supply and its indicator will light on as green. Then connect the
output end to battery‘s input end, if adaptoer indicator lights on as RED
means battery is charging, if indicator lights on as GREEN means battery is
fully charged. Charging time is about 150-180 minst Flying time is about 20
Install Smartphone holder Disassemble Smartphone holder
*Hold smartphone holder and push it along the sliding chute, which at the back
0‘ controller. Smartphone holder is fastened properly when VD“ hear a click, **Please keep the battery with 50% power for extending the operating life of
”‘9" please lock It With the phone holder “'9" the battery if do no use the product for a long time.
*iHall of the battery fully charge time could keep the battery with 50% power.
*When you need to disassemble the
smartphone holder, please undid the / Li S, OPERATION G UID E
locked screw first. Then keep pressing
down the button at the middle of ' - ' 5.1 Start Steps
sliding chute and pull it out. ' n
® Open the battery cover of quadcopter,
*To adjust your smartphone, please ' connect battery wrth quadcopter. close
adjust these three positions of the 2 battery (Over.
smartphone holder as shown. ® Longtime press power switch with two
seconds. the four LED indicators under
quadcopter's motor will flash, close the
battery (over. Then place the quadcopter
on the ground plane
All the protection frames could be install or ® Turn 0" COMTOHQV Wilh “”0 beeps, indicator 1
disassemble as consumer‘s needs. flash as green, push the left lever completely
forward and the controller will beep one time.
*Take out all the protection frames and the . then PU" ii back_ completely and controller beep
screws from pans bag. Hold protection ' ' again. Both the Indicator 1 of controller and four
frame and press the screw positions down \ \ LED indicators of quadcopter will keep light on.
into the screws holes in motor seat, then 1,: Now quadcopter and controller are paired.
lock the screws_ » (3) After paired quadcopter and controller, place the
quadcopter on the ground plane. then rotate one
circle the control lever of Direction clockwise. Four LED lights of quadcopter
*When you need ‘0 disassemble the protection frame, please undid the IOCkEd shall be flashing, and the gyro is calibrated and scanned for locking the location.
screws and pull it out from motor seat. QuadcopterCCs LED indicators keep light on and stop flashing means
calibration is finished.
3.2 Install and Disassemble Protection Frame
*tBetore flying, the quadcopter must be
calibrated on the ground plane to ensure it can
fly steadily in the air.
*tThe same operation can be made when the
quadcopter cannot work properly from impact.
@Pull left lever to lower»left corner and right lever to upper-left corner,
controller's indicator 2 flash as RED, then place controller as ground plane and
turn it to right or left till indicator 2 light off. Now controller's geomagnetisrn
calibration is finished.
6) Pull left rod to lower-left comer and right lever to upper-left corner,
quadcopter's LED indicators under motor seat will flash, place quadcopter
as ground plane and turn it to right or left 2-3 circles. Then set quadcopter
up 45 degrees from ground and turn it to left or right till its LED indicators
keep light on. Now quadcopter‘s geomagnetism calibration is finished.
® Place quadcopter on ground plane, keep its tom/ard side (camera's fonuard
direction) same as controller‘s forward direction. Pull left lever to lower-left
corner and right rod to uppereright corner, controller's indicator 2 lights on
as RED and quadcopter's LED indicators change from flash to light on. Now
quadcopter's forward direction is locked and keep it same as controller.
*iThe geomagnetism calibration of both quadcopter and controllerjust need
to set one time in the same area. No need to set before every fly time. But
quadcopter should be locked the forward direction same as controller's
before every fly time as step 0)
® After locked the forward direction of quadcopter and controller, press down
the left lever, controller with a beep. when blue indicators which at the
transmitter tow sides flash five seconds then turn to lighting form, indicator 2
flash in red,and LED which under quadcopter's motor showing horse race lamp
for five seconds then flash in opposite angles . quadcopter enter headless model
*After start headless mode, no matter how the quadcopter and player's direction
is changed. quadcopter will fly according to the direction as controller's
operation.
(9 Pull the left and right lever completely to the inside comer as above pic and
loosen them, quadcopter's blades are rotating in low speed. Push the
accelerator to fly up the quadcopter and hovering in the sky. After loosen
accelerator, quadcopter will be locked at this height. Quadcopter also could
be auto take off, after press down the lower—right button of the left lever,
controller with a beep, then quadcopter auto take off and hovering at a
certain height.
**As above start steps. if consumer do steps as
®@-@-®-®. Skip 5"BPS 6).”. quadcopter
will in normal setting height mode.
Random enter or exit headless mode when flying,
for exit headless modejust need to press down
the left lever controller.
5.2 Step Fly Step
Pull the accelerator to the lowest position and keep seconds to landing
quadcopter on the ground. then blades stop rotating. Quadcopter also be
landed by press the button at left and near power switch.
*tEmergency stop: Press the lower-right button of left lever twice continuously.
then controller with two beeps. quadcopter‘s blades emergency stop
rotating.
*tor landed quadcopter on hand, hold quadcopter's stands and turn it over
90‘, quadcopter also could be emergency stopped.
5.3 Trimming
Press down the key at top right corner with a beep into the fine-tune mode.
* If the quadcopter skew towards lorward, it
shall be adjusted by pulling backward the
right rod on the transmitter, the quadcopter's
back two LED indicators under motor seat are
flashing.
* If the quadcopter skew towards backward, it
shall be adjusted by pushing forward the right
rod on the quadcopter's forward two LED
indicators under motor seat are flashing.
*It the quadcopter skews leftward, it shall be
adjusted by pulling rightward the right rod on
the transmitter, the quadcopter's right-side two LED indicators under motor
seat are flashing.
*If the quadcopter skew towards rightward, it shall be adjusted by pulling
leftward the right rod on the transmitter. the quadcopter's left-side two LED
indicators under motor seat are flashing.
*tAfter tuning, press down the button at the top right corner on the controller,
with a beep, to quit running mode. Or do not move the right lever for three
seconds to quit tuning mode automatically.
5.4 Reset Step
When the quadcopter flies detected from crash, and could not fly well by all
calibration, please reset it as below
(D Press down the button at controller's top
right corner. controller with a beep.
® Then turn the right lever a round clockwise.
Quadcopter‘s tour red LED indicators.
which under motor seat. will change from
flashing to light on, it means gyro
calibration and controller reset are
finished. Now the quadcopter also finish
reset.
6. OPERATION AND CONTROL GUID
6.1 Speed Shift
During playing, use the button at top left corner for speed shfit according to
player‘s need.
Short press for speed switch, per short press increase one speed.
(D Low speed: Press the speed shift button
with a beep, quadcopter fly as 30% speed.
® Medium speed: Press the speed shift
button with two beeps, quadcopter fly as
60% speed.
6) Fast speed: Press the speed shift button
with three beeps, quadcopter fly as 100%
speed.
6.2 Basic Motion Operations
Push the left level
(accelerator)up and
down, the quadcopler
will ascend and
descend accordingly.
Push the left lever
(acceleratorlleftward
and rightward, the
M MTV
quadcopter will turn [m _
left and turn right i ’ v
accordingly. , ,
Turn Right
Push the right lever
(direction), up and
down.ttle quadcopter
will go forward and
backward accordingly.
Push the right lever
(direction),leltward
quadcopter will go “him“, __
left sideward and right , « Fly
sideward
accordingly.
, Right sidcwm
l m
and rightward. the 7, _ ‘ [m L
Flip Stunt must in hovering mode
and exit headless mode.
when the drone in hovering state
then press down the right lever
with a beep into flip modethen
keep press it down and pull to
fonNard , backward , leftward or
rightward to flip the quadcopter in
this direction.
In hide-i to get better playing, please keep 2m height and ascend, this
will be easy to keep the height after flips.
_ When controller is moved, quadcopter will move the same distance at same
7-1 Leftward fl‘P direction with controller. This is auto following function
Press down the right '
lever, with a beep, push
the lever leftward, the
quadcopter will flip one
circle leftward.
7.2 Rightward flip
Press down the right
lever. with a beep. push , ,
the lever rightward, the _ " ' 4 *Press down the Iower~left button 01 right
quadtomfl Will flip one lever again, after controller with a beep,
circle rightward. .. quadcopter stop return.
*To push the right lever 'fonNard" also
stop the quadcopter's return.
7.3 Forward flip
Press down the right
lever. M h a bee , ush ’ » i .
the leve:fon~ar:, tiiie J . 9. AUTO RETU RN
quadcopter wlll flip one
arduomam 77 9.1 Beyond Control Distance Auto Return
When quadcopter flight range out o! factory set sate area, (ontroller warns the user via
vibrating and both sides’ blue indicator flashing alerts, then quadcopter auto return
- , ' ‘ II It I
7.4 Backward flip mark to me factory set sale range Even I: Is (onlro ed forward y, once over 1 we sale
distante, quadtopter auto fly back to sale area.
Press down the right
lever, with a beep, pull
the lever backward, the " ' ® ' 4 '
quadcopter will flip one
circle backward.
In lling time, press down the lower-left button
of right lever, after controller with a beep.
quadtopter will automatitdlly return. If the
quadcopter of! course, please control the right
lever fixed route. Quadtopter finish auto return,
it will keep hovering in the sky about 5-8 meters
away from controller.
9.2 Low-power Auto Return
When quadcopter is low power, it will feedback the low—power signal to
controller. Then controller warns the user via vibrating and both sides‘ blue
indicator flashing alerts. quadcopter's four |£D indicators under motor seats
also flashing and start auto return. Quadcopter always hovering fly and keep
5-8 meters away from controllert
At this time, press down the lower-right button of left lever. controller with a
beep, then quadcopter auto landed and blades stop rotating.
9.3 Controller low power return fly
when controllers batteries are low power, the blue LED lights at two sides of
controller change to flash, then controller continue with sounds like 'Dl ._
Di,.,'.
Controller will send low power signal to quadcopter, then quadcopter‘s four
LED lights under motor seats become flashing and quadcopter start return fly
and keep hovering away from controller about 543 meters.
lO.WIFI REALATIME TRANSMISSION
lorl Download APP
10.2 Menu Screen
®After signal matching with controller. the
wi-Fi indicator lights on and could be saw form
the gap at bottom of quadcopter.
®Go to the setting button in your smartphone.
open Wi-Fi, lock into the 'Wifi FPV ‘W .
@Click to link till you see ‘Ljnked" , means
pairing.
@Open the downloaded APP ‘Wifi FPV
“"“' , click the icon enter control menu and
smartphone with real t'rne imager.
©lf tail to connect twill be 'Linking‘ ,
please re-connect W
A‘ Go to settings B: Open Wi-Fi
C: Connect 'Wlfi FPV "HM-
omens-um:
z y 4
A: Open the ‘HK_skyline APP"
Control intertace
B: Click the ‘PlAV" button
123456789
10.3 lcons Function Manual
LRetum 2.Take photo 3.Take video 4.?hoto 8L video playback
5.5peed: Slow 3096/ Medium 60% / Fast 100% 6.Gravity sensor mode
Domestic Android 7,5how / Hide joystick interface 8.Reverse the screen 930 VR
-:- " ' .‘.l - .
Foreign Android ios QR Code
QR Code QR Code
10/11: Forward/ backward fine-tune 12/13: Left/Right rotating fine-tune
14/15: Left/Right sideward fly fine-tune Al: One key take ofl
A2: One key take off A3/A4: Ascend / Descend
AS/AG: Left rotating/Right rotating A7/A8: FonNard/ Backward
A9/A10: Left/Right sideward fly
10.4 APP support 3D VR
Consumer could purchase related VR product for 3D flight. When click the "SD“
icon in the upper right corner, control interface change to two parts. The VR‘s
ware, focal length adjustment and other settings, please check the user manual
of the VR.
9.0333920
dot-APP with different functions, like one key take off, one key landing, gravity
sensor mode and so on. Consumer could learn all the operation guide from
Helps.
10.5 High Precision Adjustable Steering Gear
The camera system of quadcopter built with HD camera and high precision
adjustable steering gear. and it could be adjusted the shooting angle by the
buttons on controller.
®Short press the upper button. camera will move up. when long press this
button. camera will keep moving up.
@When press the lower button, camera will move down. Camera could be
moved over 90‘.
*To move the camera for keep video smooth and beauty.
11 FLIGHT ENVIRONMENT
12 INSTALL BLADES
10.6 Take Photo 81 Video
During flying time. taking photo and video by APP. Click the icons on smart photo
or press the button on controller.
Q) Press the left button to take a picture, per press camera take a picture.
® Press the right button to start taking video then press again to stop and save
the video.
10.7 View Saved Documents
@Finished taking picture or video, it could be viewed in the APP.
®The document also saved in SD card of camera. To check document by
computer, please turn off the power of quadcopter, press SD card and take it
out first. Then take out the SD card reader from the parts bag, install the SD
card, connect card reader to USB port of computer.
*‘k When quadcopter fly out of WieFi effective control range, picture or video
are savedjust in SD card not in APP, Once picture or video could not be find in
APP, not means it was lost or not be saved.
Do not operate the
quadcopter in the bad
conditions as
mentioned
for advoiding accident
or unexpected
damages.
The blades shall be installed to designated location
*To install or change quadcopter's blade. check the letter on blade and make
sure it is same as the letter on motor seat. Blade A should be install to the motor
seat with letter A. and 50 blade 8 is install to motor seat with letter B. 0r
quadcopter could not fly in normal.
03-)
new
Both blade shaft and blade install hole with lock
position to make sure the blade should be install
at correct position.
® Take apart of the blade locker screw and the
lower lampshade locker screw, then take out the
damaged blade.
®Take out the new blade and aim it at the blade
shaft till it hit the gear then turn it right or left till
the inside locker position tight with the blade
shaft.
@Continue push blade till the end then lock the
blade screw and lower lampshade screw.
l3.SAFETY PRECAUTIONS
6) Stay away from obstacles
This product is workable outdoors Selecting barrier-free environment to
advoiding demage due to impact person or things.
(2) Leave away from moisture or heat source
The interior of an aircraft is made up of a number of sophisticated electronic
components, so it must be protected from moisture or moisture as well as
high temperature storms. Drying and so on.
@Lithium battery safety
It is strictly prohibited to use the lithium battery outside the factory to fly, the
internal configuration of the lithium battery used by different manufacturers is
Very different, so as not to cause damage to the aircraft electronic components
and personal safety and other dangerous.
It is strictly prohibited to use the battery charger outside of the factory for
charging. so as to avoid short circuit. expansion. defamation, or even fire.
explosion and other dangerous.
©NiMH battery safety
Please notice the place of anode and cathode when pit in the batteries into
controller. In order to protect the life of batteries. do not mix the new and old
battery.
When quadcopter is not used for long periods of time, please take out all
batteries to avoid battery leakage, battery failure. Please do not use leaky
battery.
14.TROUBLE SHOOTING
Problem Reason Solution
1. Shgal matchig laied L lib-mm"; 393%
The quadcovlel 2. M0,.“ 0, 2. Replace the uansmlflev
4” "M MW“ mmsmitter low voltage W“
a Re
response way transmitter low voltage Replacng the battery or vansmmev
ox 'Iltflvupt signal
L Quadcopm is not placed on
horizontal surface when .
The quadcopter 5. . L lrmatl‘hl‘tg
can not hover ““94 "““hm 2.1m: llamsmitler should be reset
2. Fine-lune of transmittev is
not reset yet
15.SPARE PARTS LIST
1.Transmitter
2.Phone holder
3.A/C adaptor
(B
(D
4.Camera sets
7‘Lower body
10.Protection frame
13VMotor cover
5.Li-ion battery
8.5tands + Antenna
Cover
11.Positive inversion
molar
14.Lampshade
6.Upper body
12.Motor seat
15.Long/shon carbon
fiber tube
E.
k/
16.Light circuit of 17598, with Shaft 18.Forward and
forward / backward light backward light
on ~
09
m a
19,Bearing 20.Battery seat 21,Battery door/front
lampshade
22.Receiver board 23.5teering engine
with Wi~Fi circuit board
Yhis device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to
operate the equipment.
- - - Thank you for buying Ihis product I wish you have a good limel - - -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : kwan
Create Date                     : 2018:03:05 11:24:47+08:00
Modify Date                     : 2018:03:05 13:49:43+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Producer                        : GPL Ghostscript 9.07
Creator Tool                    : FreePDF 4.14 - http://shbox.de
Metadata Date                   : 2018:03:05 13:49:43+08:00
Document ID                     : uuid:4154fb9a-2280-11e8-0000-246bae287737
Instance ID                     : uuid:301dc5ed-1c55-4783-ae4c-94e878e6bc4f
Format                          : application/pdf
Title                           : 1
Creator                         : kwan
Page Count                      : 10

EXIF Metadata provided by EXIF.tools