HKC PX347CPRIME 8-Inch Fully Ruggedized Tablet User Manual Pixio NB34C PX347c Prime
HKC Corporation Limited 8-Inch Fully Ruggedized Tablet Pixio NB34C PX347c Prime
HKC >
Users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3417532 |
| Application ID | yyoc6xb58U88RDz2CYK9YA== |
| Document Description | Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 34.62kB (432704 bits) |
| Date Submitted | 2017-06-07 00:00:00 |
| Date Available | 2017-06-07 00:00:00 |
| Creation Date | 2017-05-08 17:57:54 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2017-05-19 08:57:19 |
| Document Title | Pixio NB34C(PX347c Prime)说明书- |
| Document Creator | Adobe Illustrator CS5 |
LED I. Safety Prevention Measures Please always place this device on a stable surface; otherwise, it may fall and be damaged. The altitude and the tropical environment the adapter fits depend on which adapter is used for the device. The rating plate on the back of the device with the above warning sign indicates that this productis applicable for the safe use of the region with altitude of 2,000m and below. Do not hold the plug with wethand ; otherwise, electric shock may occur. Make sure the plug has a good touch because poor touch may cause fire. Do not use a broken power plug nor keep a power cord near heat source; otherwise, electric shock or fire may occur. When cleaning the device, be sure to remove the powerplug , use a piece zof soft cloth rather than industrial chemical to clean the device, be sure not to let water enter the device. Do not disassemble this device without permission. In case of failure, be sure to contact a profesional servicing person to fix it. The authorized disassembly of this device may result in electric shock or fire. In case of rare smell or noise out of this device, be sure to immediately cut off the power supply and ask a professional servicing person to fix the problem. When this device is idle for long time, be sure to power it off; otherwise, electric shock or fire may occur. Note: The device with AC switch may use such AC switch as cut-off component. The device without AC switch may use power plug or coupler as cut-off component. In case of the normal use of the equipment, make sure the cut-off component can be accessed easily. All specifications and informations are subject to change without notice. -1- II. Installation Instructions 1. Accessories Power cord Base/Stand Signal cable Warranty card and certificate of conformity User manual (The above pictures are for illustration only and the physical accessories shall govern.) 2. Angle Adjustment 2.2 When adjusting the angle of the monitor, be sure not to touch or press the area of the screen. 2.1 The screen can be adjusted by inclining forward and backward; however, the specific adjustment depends on the specific model of the device. Generally, it may be inclined 5±2° forward and 15±2° backward. (The above pictures are for illustration only and the physical accessories shall govern.) All specifications and informations are subject to change without notice. -2- III. Connect the Monitor to PC Before connecting the LCD monitor to PC, please power the PC and the monitor 1 Power Plug Connect the power cord of the monitor into the POWER port in the back of the monitor. 2 DVI Port Connect the DVI cable into the DVI IN port in the back of the monitor (this needs the support of the monitor). 3 HDMI Port Model with inbuilt power supply Connect the HDMI cable into the HDMI IN port into the back of the monitor (this needs the support of the monitor). * Warning: Always use the power cord of standard configuration. 4 DP Port Connect the DP cable into the DP IN port of the monitor (this needs the support of the monitor). (The above pictures are for illustration only and the physical accessories shall govern.) All specifications and informations are subject to change without notice. -3- IV. User Setup 1. Schematic Diagram of Keys 2. Description of Keys' Functions Pops up the menu/Backs to the previous menu ( in case of main menu, exits from the whole menu) . ▲ 1. When the menu is activated, used as the left function selection key, and decreases progressively the value of the progress bar. 3. ▲ When the menu is activated, used as the right function selection key, and increases progressively the value of the progress bar; when the me nu is inactivated, use d a s the spe cifie d shortcut mode hot ke y ( FPS/RTS mode) . 4. If the menu is activated, chooses the corresponding function. 2. 5. 6. Power switch: Powers on/off the monitor. LE D indicator light Bl u e: in normal switch-on state; flickering in blue: in power-saving state. Note: The physical keys of the specific model shall govern. All specifications and informations are subject to change without notice. -4- V. Operation Menu (OSD) Function Descriptions Mai n Men u Item Main Menu Icon Su bmen u Item Main Menu Icon Su bmen u Opti on s Brightness NONE NONE NONE NONE Adjust display brightness Contrast NONE NONE NONE NONE Adjust display contrast On NONE NONE Activate dynamic contrast DCR Mode Color Temp. Main Menu Des cr i pti on Icon Off NONE NONE Inactive dynamic contrast Return NONE NONE Return to the previous menu Exit NONE NONE Exit from the whole menu Standard NONE NONE Normal work mode Movie NONE NONE Movie mode FPS NONE NONE FPS game mode RTS NONE NONE RTS game mode EyeSaver NONE NONE Eye protection ray filter application mode Return NONE NONE Return to the previous menu Exit NONE NONE Exit from the whole menu Cool NONE NONE Set as cold color temperature Warm NONE NONE Set as warm color temperature Red Fine tuning of red color temperature User Green Fine tuning of green color temperature SRGB NONE NONE SET TO SRGB Return NONE NONE Return to the previous menu Fine tuning of blue color temperature Blue Aspect Input Exit NONE NONE Exit from the whole menu Auto NONE NONE Automatically adjust picture aspect ratio 21:9 NONE NONE Picture in 21:9 mode 4:3 NONE NONE Picture in 4:3 mode Return NONE NONE Return to the previous menu Exit NONE NONE Exit from the whole menu DVI NONE NONE DVI (digital) signal input HDMI NONE NONE HDMI (digital) signal input DP NONE NONE Display port (digital) signal input Return NONE NONE Return to the previous menu Exit NONE NONE Exit from the whole menu SwapInput WindowSwap MultiWindow PIP PBP PIP PIPPOS Switching signal source Change the picture in picture display position Home screen and the picture in picture singnal source interchange Reset Reset the window display Return Return to the previous menu Exit Exit from the whole menu All specifications and informations are subject to change without notice. -5- Mai n Men u Item Main Menu Icon Su bmen u Item Main Menu Icon PBP2WIN MultiWindow Su bmen u Opti on s Main Menu Des cr i pti on Icon Win1Input Switch split screen 1 signal source Win2Input Switch split screen 2 signal source Reset Reset the window display Return Return to the previous menu PIP PBP Exit Exit from the whole menu Reset NONE NONE Reset the window display Return NONE NONE Return to the previous menu Exit NONE NONE English English English Française Française Française Deutsch Deutsch Deutsch Italiano Language Italiano Italiano Español Español Español 한국어 한국어 한국어 Return to the previous menu Return Exit On Other Exit from the whole menu ON Off Power Off Exit Exit from the whole menu YES Reset to factory setup NO Exit from this function Return to the previous menu Return Exit On Exit from the whole menu ON Off Over driver Exit On Exit from the whole menu ON Off FreeSync Exit Exit from the whole menu Gamma1 Adjust color tone brightness grey1 Gamma2 Adjust color tone brightness grey2 Return to the previous menu Return Exit Exit Exit NONE NONE Activate FreeSync function (this needs the support of the monitor) Inactivate FreeSync function (this needs the support of the monitor) Return to the previous menu Return Return Activate OD function (this needs the support of the monitor) Inactivate OD function (this needs the support of the monitor) Return to the previous menu Return Gamma Automatically turn off after saving power for 1min Inactivate the function of timed switch-off Return to the previous menu Return Reset Exit from the whole menu Exit from the whole menu NONE NONE Return to the previous menu NONE NONE Exit from the whole menu NONE NONE Exit from the whole menu Note: The functions may be adjusted due to specific model or the upgrade of software version. The physical model shall govern. All specifications and informations are subject to change without notice. -6- 1. PIP (Picture in Picture) Input Information Picture in Picture Additional Input Source Main screen input source DP HDMI Window Swap picture mode DVI DP HDMI D VI Note:"O" means this feature is supported while "X" means it is not supported. The above information is related to input options and the monitor's OSD Menu. For more information on these, refer to the "Basic Setup" and "OSD Menu" sections of the manual. 2. PBP (Picture by Picture) Resolution Information When using the PBP function, certain resolution settings are recommended in order to prevent image deformation or other undesired visual effects. 1680x1050p is the recommended resolution setting for each window. 1680x1050p 1680x1050p All specifications and informations are subject to change without notice. -7- VI. FAQ Faults occurring Possible solutions The power indicator light is not on ◆ Check if the power is on. ◆ Check if the power cord is connected. Impossible plug-and-play ◆ Check if the function of plug-and-play of the device is compatible with PC. ◆ Check if the display card is compatible with the plug-and-play function. Dimming picture ◆ Adjust brightness and contrast. Flickering picture or picture with ripples ◆ There may be electrical appliances or equipment with electronic disturbance. The power indicator light is on (flickering), but the monitor has no pictures. ◆ Check if the PC power is on. ◆ Check if the PC display card is inserted properly. ◆ Check if the signal cable of the monitor is correctly connected with the PC. ◆ Check the signal cable plug of the monitor and make sure every pin has no bending. ◆ Observe the indicator light by pressing the Caps Lock key on the PC keyboard and check if the PC is working. Color shortage (red, green and blue) ◆ Check the signal cable of the monitor and make sure every pin has no bending. Picture with color difference (white looks not white) ◆ Adjust RGB color or reselect color temperature. All specifications and informations are subject to change without notice. -8- VII. Product Specifications Diagonal dimensions Picture Picture Dot distance (mm) aspect ratio dimensions (mm) 34"(86.36cm) Ambient temperature Humidity 21:09 Optimal resolution 797.22*333.72 0.07725*0.23175 3440*1440@60Hz Storage temperature -20℃ to 45℃ Working temperature 0℃ to 40℃ RH for operation 10% to 85% NNote: The actual application of the above parameters shall be subject to the specific model. VIII. Table of Product Preset Modes Display Aspect dimensions ratio 34"(WQHD) Preset resolution/Refresh rate 800x600 1024x768 1280x1024 1440x900 1680x1050 1920x1080 2560x1080 3440x1440 21:9 640x480 (60Hz) (60Hz) (60Hz) (60Hz) (60Hz) (60Hz) (60Hz) (60Hz) (60Hz) Remark: When the resolution are 2560*1440@60Hz/3440*1440@60Hz/ 1920*1080@144Hz/2560*1440@144Hz/3840*2160@30Hz connection via DVI port, pls choose 24+1 pin double - channel DVI cables. IX. System Requirements Below are the minimum system requirements for your monitor. The requirements are recommended in order to properly use all of the monitor's features and ensure high-quality picture. Minimum Requirements Operating System: Windows® 7 / Windows® 8 / Windows® 10 64-bit (latest service pack) or higher Processor (CPU): Intel® Core™ i5 or AMD Phenom™ II X3 or higher Graphics Card: NVIDIA® GeForce® GTX 950 or AMD Radeon™ R9 380 or higher Memory: 6 GB RAM *All trademarks and registered trade names are the property of their respective owners. All specifications and informations are subject to change without notice. -9-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:05:08 17:57:54+08:00 Creator : Adobe Illustrator CS5 Modify Date : 2017:05:19 08:57:19+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Pixio NB34C(PX347c Prime)说明书- Metadata Date : 2017:05:19 08:57:19+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 212 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 20876 bytes, use -b option to extract) Instance ID : uuid:571d09d9-7c13-4ccd-b1e8-606df223423d Document ID : xmp.did:D6EC8CA18F33E7119EF8820958029D3D Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:4a09edcd-b7a5-4bad-88e1-32738037fcd3 Derived From Document ID : xmp.did:D5EC8CA18F33E7119EF8820958029D3D Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:69CDB7EBF82EE711B95F987434FA7F40, xmp.iid:7C058EDE7930E711B6E58FFB5CD886E9, xmp.iid:B0D5D05DAE33E711819F801754DF26C5, xmp.iid:B1D5D05DAE33E711819F801754DF26C5, xmp.iid:D3EC8CA18F33E7119EF8820958029D3D, xmp.iid:D4EC8CA18F33E7119EF8820958029D3D, xmp.iid:D5EC8CA18F33E7119EF8820958029D3D, xmp.iid:D6EC8CA18F33E7119EF8820958029D3D History When : 2017:05:02 16:30:13+09:00, 2017:05:04 13:43:36+09:00, 2017:05:08 14:22:44+09:00, 2017:05:08 14:22:54+09:00, 2017:05:08 17:47:13+08:00, 2017:05:08 17:54:22+08:00, 2017:05:08 17:55:15+08:00, 2017:05:08 17:57:46+08:00 History Software Agent : Adobe Illustrator CS5.1, Adobe Illustrator CS6 (Windows), Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 139.999896 Max Page Size H : 210.001652 Max Page Size Unit : Millimeters Font Name : ArialMT, MicrosoftYaHei, SimHei, HelveticaNeue-Medium, HYkanB, HelveticaNeueLTStd-Roman Font Family : Arial, 微软雅黑, 黑体, HelveticaNeue Medium, HYkanB, Helvetica Neue LT Std Font Face : Regular, Regular, Regular, Medium, 55 Roman Font Type : Open Type, Open Type, Open Type, Open Type, Unknown, Open Type Font Version : Version 3.00, Version 6.02, Version 5.01, OTF 1.0;PS 001.002;Core 1.0.22, Version 5.01, Version 2.020;PS 002.000;hotconv 1.0.50;makeotf.lib2.0.16970 Font Composite : False, False, False, False, False, False Font File Name : arial_0.ttf, msyh.ttf, simhei.ttf, HelveticaNeue-Medium.otf, gulim.ttc, HelveticaNeueLTStd-Roman.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 185 C, PANTONE 199 C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 밝기 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 12EXIF Metadata provided by EXIF.tools