HM Electronics HS500 SYS500 Headset User Manual 310869

Download:
Mirror Download [FCC.gov]
Document ID	310869
Application ID	UHiBWKR+9egKpCh8ZxEMEA==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	196.47kB (2455916 bits)
Date Submitted	2003-03-17 00:00:00
Date Available	2003-03-17 00:00:00
Creation Date	2003-03-17 18:27:36
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-03-17 18:27:36
Document Title	Microsoft Word - 310869.DOC
Document Creator	PScript5.dll Version 5.2
Document Author:	fcc

HME# 400468
Rev 3/14/03
System 500
Wireless Drive-Thru Audio System
Operating Instructions
Table of Contents
I.
GENERAL .........................................................................................................................1
II.
EQUIPMENT FUNCTIONS AND USE .........................................................................1
A. Base Station ...............................................................................................................................2
B. Headset .....................................................................................................................................4
C. Battery Charger ..........................................................................................................................7
III.
SYSTEM 500 OPERATION ............................................................................................8
A. Single-Lane Operation ..............................................................................................................8
B. Dual-Lane Operation..................................................................................................................8
C. Message Repeater Operation......................................................................................................9
D. Speed-Team Operation ............................................................................................................10
IV.
EQUIPMENT CARE AND CLEANING ......................................................................10
A. Proper Handling .......................................................................................................................10
B. Cleaning ...................................................................................................................................10
V.
OPTIONAL EQUIPMENT ............................................................................................11
VI.
FCC NOTICE ..................................................................................................................11
VII.
IN CASE OF PROBLEMS.............................................................................................12
VIII.
SPECIFICATIONS .........................................................................................................16
List of Figures
Figure
Title
Page
System 500 equipment ............................................................................................................1
Base station exterior................................................................................................................2
Headset features and controls..................................................................................................4
Correct wearing of headset......................................................................................................5
Battery removal.......................................................................................................................6
Battery replacement ................................................................................................................6
Battery charger........................................................................................................................7
Base station circuit boards ....................................................................................................14
The HME logo and the word COMMUNICATOR® are registered trademarks of HM
Electronics, Inc.
© Copyright HM Electronics Inc
March 2003
I.
GENERAL
The System 500 is a wireless audio system primarily for use at
quick-service restaurants.
II.
EQUIPMENT FUNCTIONS AND USE
Figure 1. System 500 equipment
A. Base Station
The base station is the electronic heart of the System 500. It
contains the circuitry through which all functions of the drivethru audio system are channeled.
External base station features are shown in Figure 2, and
described on page 3. Its internal features are shown in Figure
8, and the base station circuit board switches and adjustments
are listed on page 15.
Figure 2. Base station exterior
Base Station External Features
Front
–
•
POWER light is on when the base station has power.
•
MESSAGE RECORD light is on RED when the base station is
ready to record
message #1 for the message repeater, and blinking RED while
message #1 is being recorded. It is on GREEN when the base
station is ready to record message #2 for the message
repeater, and blinking GREEN while message #2 is being
recorded. The MESSAGE REPEATER button must be pushed IN.
•
RECEIVE light is on during channel-A and channel-B
transmissions, and is used for troubleshooting.
•
“ A ” light is on during channel-A transmission.
•
“ B ” light is on during channel-B transmission.
•
VEHICLE light is on when a vehicle is present in the drivethru lane or when the system is in vehicle-detect override.
Bottom
–
•
PUSH FOR RECORD MODE button must be pushed IN and released
once to prepare the base station to record message #1 for
the message repeater, or pushed IN and released twice to
record message #2.
•
MESSAGE REPEATER button must be pushed IN to use the
message repeater, OUT when the message repeater is not
being used.
•
SPEED TEAM button must be pushed IN for speed-team
operation, OUT for normal drive-thru operation
•
VEHICLE DETECTOR button must be pushed and left IN to
override a vehicle detector; to reset vehicle detector,
push IN and leave IN for 5 seconds, then push again and
leave OUT for normal vehicle detection.
Left Side
•
–
WIRED/WIRELESS button must be OUT when using the wireless
System 500, IN when using a wired backup system.
B. Headset
The headset can be operated in a push-to-talk (PTT), hands-free
(HF) or auto hands-free (AHF) mode.
In the PTT mode, you must press and hold one of the A buttons on
the headset while talking to a customer, and release the button
to hear the customer’s response. The push-to-talk mode is an
example of “ half-duplex ” operation.
In the HF and AHF modes, you can transmit and receive
communication at the same time, as in a normal telephone
conversation. In the HF mode, transmission and reception are
activated by touching and releasing one of the A buttons on the
headset. In the AHF mode, transmission and reception are
activated automatically when a customer drives into the drive-thru
lane. The hands-free and auto hands-free modes are both examples
of “ full-duplex ” operation.
1. Features and Controls
Figure 3. Headset features and controls
2. How to Wear the Headset
•
Wear the microphone on your right or left side,
near the side of your mouth.
•
To adjust the microphone position, hold the microphone
boom at its base and pivot the boom up or down.
3. Routine Headset Operation
The headset control buttons are touch-sensitive. Use
your fingertips, not your fingernails, to touch the buttons.
a. Power On/Off
Figure 4.
Correct wearing
Power Light
of headset
• The headset power light blinks while the headset
is transmitting your voice.
• The headset power light is ON steady when the headset is
not transmitting.
• The headset power light is red for lane 1.
• The headset power light is green for lane 2.
Power On
• Press and release the power ON/OFF button to turn the
headset on.
• A voice message in the headset says “ Power on, lane one
(or two).”
• The headset power light blinks green, then goes on steady
red (lane 1)
or green (lane 2).
Power Off
• Press and hold the power ON/OFF button 3 seconds.
• A voice message in the headset earpiece says “ Power
off. ”
• The headset power light goes off.
b. Volume Up/Down
Single-Step Volume Adjustment
• Lightly touch and release the Volume-up or Volume-down
button.
• A beep sounds in the headset earpiece each time the
button is pressed.
• The volume increases or decreases, one step at a time.
Continuous Volume Adjustment
• Lightly press and hold the Volume-up or Volume-down
button.
• The volume increases or decreases continuously while the
button is held.
• A series of beeps sounds in the headset earpiece until the
volume reaches
maximum or minimum.
4. Auto-Hands-Free Setting
The auto-hands-free (AHF) feature allows one operator to
communicate with a customer in one drive-thru lane without
pressing any buttons. Other operators can listen. If the
first operator turns the AHF feature off, another operator can
turn it on.
CAUTION: Only one HS500 per lane can be set in the autohands-free mode, or interference will occur when a customer
enters the drive-thru lane.
•
With the power already on, press and hold the Power button
and touch the Volume-down button — You will hear “ Autohands-free on ” or “ Auto-hands-free off”
NOTE: You must touch the Volume-down button within 2 seconds
after pressing the Power button, or you will turn the power
off and have to begin again.
•
The last auto-hands-free on/off message you hear will
remain in effect until you change it again or turn the
headset power off.
5. Configuration Settings
•
With the power already on, press and hold the Power button
and press the
B button. NOTE: You must press the B button within 2
seconds after pressing the power button, or you will turn
the power off and have to begin again.
•
You will hear “ Configuration” in the headset.
•
Select the desired configuration setting described in “ a ”
or “ b ” below.
•
When finished, press and release the B button to exit the
configuration-settings mode. You will hear “ Power on,
lane (one or two) ” in the headset.
•
Configuration settings will remain in effect until you
change them again.
a. Hands-free On/Off
•
Touch and release the Volume-down button — you will hear
“ Hands-free on. ”
•
Touch and release the Volume-down button again — you
will hear “ H ands-free off. ”
•
You will continue to hear “ Hands-free on ” or “ H andsfree off ” messages alternating each time you touch and
release the Volume-down button.
The last hands-free on/off message heard will be
selected when you exit the configuration-settings mode.
b. Single/Dual Lane
•
Touch and release the A1 button — you will hear
“ S ingle lane. ”
•
Touch and release the A1 button again — you will hear
“ D ual lane. ”
•
You will continue to
messages alternating
A1 button. The last
be selected when you
hear “ Single lane” or “ Dual lane ”
each time you touch and release the
single/dual lane message heard will
exit the configuration-settings mode.
6. Battery Removal and Replacement
If you hear “ Headset Battery Low ” in the headset, its
battery needs to be replaced and recharged. HS500 batteries
need be recharged after 8 to 9 hours of normal use.
Batte
ry
relea
Push the battery-release latch upward.
se
Pull the battery out from the top.
a. Battery Removal
•
•
b. Battery Replacement
•
•
Figure 6.
Battery replacement
Figure 5.
Battery removal
Place the end of a battery into
the battery
compartment, with its metal
contacts
downward.
Press the top of a battery into
the battery
compartment until it snaps in place
under the battery-release latch.
C. Battery Charger
Up to four headset batteries can be charged in the charger at the
same time. Battery charging time is approximately 2 hours. The
battery status lights adjacent to each charging port are
explained below. Up to six fully charged batteries can be stored
in the battery storage ports.
•
Insert a battery in one of four charging ports until it clicks
in place.
•
The yellow light next to each battery port stays on while the
port is empty.
When a battery is in a port, a yellow light flashing next to
it indicates CHARGE PENDING, which means the temperature where
the charger is located is out of the battery’s operating range
(32o-104oF, 0o-40oC). Adjust the room temperature or move the
charger to a cooler area.
When battery is in port, yellow light on steady next to
battery port means CHARGE FAILED. Follow diagnostic
instructions on side of battery charger.
•
The red CHARGING light next to each battery port stays on
while a battery in the port is charging.
•
The green READY light next to each battery port goes on when a
battery in the port is fully charged.
•
Remove the fully charged battery from its charging port and
place it in a storage port.
CAUTION: Do not remove batteries from the charger until the
green READY light is lit, or the charger will reset and the
charge cycle will begin again.
Battery in
charging
port
Battery in
storage
port
III.
SYSTEM 500 OPERATION
When a customer arrives in the drive-thru lane, you will hear a
double beep in the headset. In dual-lane operation, if you are
communicating with a customer when another customer arrives in the
opposite lane, a higher pitch double beep will sound in the headset
to alert you of the second customer’s presence. When the first
customer leaves the speaker post, the same higher pitch double beep
will repeat in your headset every 4 seconds until you touch the A
button required to communicate with the second customer.
A. Single-Lane Operation (one base station for one speaker post)
Push-To-Talk (PTT) Mode:
! Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
! Adjust customer’s voice level in headset if necessary.
! Press and hold A1 or A2 button to speak to customer. — Release to
listen.
Hands-Free (HF) Mode:
! Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
! Adjust customer’s voice level in headset if necessary.
! Touch and release A1 or A2 button to speak and listen to customer.
! Touch and release A1, A2 or B button to end communication with
customer.
! Touch and release A1 or A2 button to speak to the customer again.
! If customer drives away from speaker post or menu board, headset
automatically stops transmitting.
Auto Hands-Free (AHF) Mode:
! Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
! Adjust customer’s voice level in headset if necessary.
! Speak and listen to customer without pressing any buttons.
! Touch and release A1, A2 or B button to end communication with
customer.
! Touch and release A1 or A2 button to speak to the customer again.
! If customer drives away from speaker post or menu board, headset
automatically stops transmitting.
B. Dual-Lane Operation (two base stations for two speaker posts)
Push-To-Talk (PTT) Mode:
! Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
! Adjust customer’s voice level in headset if necessary.
! Press and hold A1 button to speak to customer in Lane 1 or A2 button
to speak to customer in
Lane 2.
— Release to listen.
Hands-Free (HF) Mode:
10
! Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
! Adjust customer’s voice level in headset if necessary.
! Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak and
listen to customer.
! Touch and release A1, A2 (depending on lane) or B button to end
communication
with customer.
! Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak to
the customer again.
! To change lanes, touch and release the opposite A button.
! If customer drives away from speaker post or menu board, headset
automatically stops transmitting.
Auto Hands-Free (AHF) Mode:
! Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
! Adjust customer’s voice level in headset if necessary.
! Speak and listen to customer without pressing any buttons.
! Touch and release A1, A2 (depending on lane) or B button to end
communication
with customer.
! Touch and release A1 button for Lane 1 or A2 for Lane 2, to speak to
the customer again.
! To change lanes, touch and release the opposite A button.
! If customer drives away from speaker post or menu board, headset
automatically stops transmitting.
C. Message Repeater Operation
To record messages for the message repeater, press the MESSAGE
REPEATER button in, on the bottom of the base station, and do the
following:
To record
Message
#1
To record
Message
#2
ACTION
RESULT
Press and release the RECORD
MODE button on the base
station once.
Press and hold button B on
the headset and talk into the
headset microphone to record
a message.
Release button B.
The red MESSAGE RECORD
light on the base station
will come on.
The MESSAGE RECORD light on
the base station will begin
blinking.
Press and release the RECORD
MODE button on the base
station twice.
Press and hold button B on
the headset and talk into the
headset microphone to record
a message.
Release button B.
The record function will
stop and the MESSAGE RECORD
light will go off.
The green MESSAGE RECORD
light on the base station
will come on.
The MESSAGE RECORD light on
the base station will begin
blinking.
The record function will
stop and the MESSAGE RECORD
light will go off.
NOTES:
Locate the S7 and S8 DIP switches at the bottom-center of the
audio circuit board inside the base station for the following
settings.
Message #1
•
S8 switch #7 in the ON position enables Message #1 to be
played.
•
will be triggered by a vehicle present signal if S7 switch 5
is in the OFF position. The playing message can be cancelled
by pressing button A on the headset.
11
•
will be triggered by an alert signal if S7 switch 5 is in the
ON position.
•
will be played to the locations selected if S7 switches 2, 3
and/or 4 are in the ON position.
Switch 2 enables Message #1 to be played back in all
HS500 headsets.
Switch 3 enables Message #1 to be played back on the
outside speaker.
Switch 4 enables Message #1 to be played back on the
ceiling speakers.
Message #2
•
S8 switch #8 in the ON position enables Message #2 to be
played.
•
will be triggered by a vehicle present signal if S8 switch 5
is in the OFF position.
The playing message can be
cancelled by pressing button A on the headset.
•
will be triggered by an alert signal if S8 switch 5 is in the
ON position.
•
will be played to the locations selected if S8 switches 2, 3
and/or 4 are in the ON position.
Switch 2 enables Message #2 to be played back in all
HS500 headsets.
Switch 3 enables Message #2 to be played back on the
outside speaker.
Switch 4 enables Message #2 to be played back on the
ceiling speakers.
If S7 switch 5 and S8 switch 5 are both set to ON or OFF, Message
#1 and Message #2 will be played alternately.
After a new message has been recorded or after the base station
has lost and regained power, any message to the outside speaker
will always be heard in the headset the first three times it
plays.
12
D. Speed-Team Operation
Speed team operation is used during high-volume times. An order
taker wearing an HS500 headset relays orders from outside into
the store, using button B on the headset. Placing the speed-team
switch, on the bottom of the base station, in the ON position
will disable the outside speaker/microphone and the vehicle-alert
tone.
IV.
EQUIPMENT CARE AND CLEANING
A. Proper Handling
•
When adjusting microphone position, hold boom at base, not at
microphone end.
•
Carry headset by headband, not by earpiece or battery end, and
never by microphone boom.
•
Use both hands to put headset on or take it off.
B. Cleaning
1. Headsets
•
Remove batteries from headsets.
•
Clean batteries and headsets with damp sponge sprayed with
household cleaner. Squeeze excess liquid out of sponge
before using it.
•
Clean metal contacts on batteries and headsets as follows.
Wet tip of swab with alcohol and squeeze excess alcohol
from it. Wipe each contact with swab and be certain all
contacts are dry before reinstalling batteries in headsets.
•
Foam muffs on headset earpieces can easily be replaced for
sanitary purposes. To order extra foam muffs, call your
local HME sales representative.
2. Battery Charger
Avoid splashing water or grease on the battery charger.
the battery charger monthly as follows.
CAUTION:
it.
Clean
Always unplug the battery charger before cleaning
•
Remove all batteries from the battery charger.
•
Clean the battery charger case with a damp sponge. Wet the
sponge and wring it out so it is damp, not dripping wet.
Spray household cleaner on the sponge (NOT DIRECTLY ON THE
EQUIPMENT). Clean the battery charger with the sponge and
dry it thoroughly.
•
Wet the tip of a cotton swab with rubbing alcohol and
squeeze the excess alcohol from the swab. Wipe the metal
contacts inside each battery port with the damp swab.
Allow the contacts to dry before placing batteries in the
ports.
13
V.
OPTIONAL EQUIPMENT
Equipment
Model Number
Headset COMMUNICATOR®
Battery for HS500
Headset Earmuff
Ceiling Speaker
Ultrasonic Vehicle Detector
Vehicle Detector Board
Vehicle Detector Loop (underground)
Message Repeater
Remote Display
Low-Profile Speaker
Microphone
Mode Switch (dual lane)
Switcher Circuit Board
VI.
HS500
BAT40
No model number
MM100
DU3
VDB101A
VDL100
MR300
R30
SP2500LP
DM3
MS1000
No model number
FCC NOTICE
HME wireless radio frequency systems are type-accepted in the United
States under Part 90 of the Federal Communications Commission (FCC)
Code of Federal Regulations, and type-approved in Canada by Industry
and Science Canada. Because licensing depends on the system’s
application, it is the user’s responsibility to apply for a license
from the FCC in the U.S. and its possessions, or from Industry and
Science Canada in Canada and its territories. Licensing
requirements vary from country to country. Contact your local
licensing agency for specific requirements.
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communication. Operation of this equipment in
a residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at his
own expense.
Changes or modifications not expressly approved by HM Electronics,
Inc. could void the users authority to operate this equipment.
14
VII.
IN CASE OF PROBLEMS
PROBLEM
No sound is
heard in
headset when
you press
button A and
speak into
microphone.
PROBABLE CAUSE
Power may be off at base
station.
Power supply in base
station may not be
working.
Headset power may not be
on.
Volume may not be set
correctly.
Battery may be low or
defective.
Headset may be defective.
Headset channel
A or B is not
working.
Outbound sound
is too low.
No outbound
sound; Customer
cannot hear
anything.
Customer cannot
be heard in
push-to-talk
(PTT)
operation.
Only static can
be heard in
headsets.
Headset power may not be
on.
Battery may be low or
defective.
Channel A or B light on
base station does not
light when headset button
A or B is pressed.
Frequency settings may be
wrong.
Outbound volume may be set
too low for environment.
System may be set for
speed-team operation.
There may be loose wires
on outside speaker or base
station circuit board.
Speaker or base station
may be defective.
System may be set for
speed-team operation.
Base station may be set
for wrong drive-thru mode
(full or half-duplex).
Base station may not be
powered.
15
SOLUTION
Check circuit breaker for
building.
Check power supply
indicator lights on base
station. If no light is
lit,
be certain AC power adapter
is plugged into AC
electrical outlet and is
connected to J16 on base
station audio circuit
board.
Press Power ON/OFF button
on headset. Be certain
power light goes on.
Adjust headset volume with
Volume-up and down buttons.
Check Power light. If not
lit, replace battery.
Use another headset. Call
HME. *
Press Power ON/OFF button
on headset. Be certain
power light goes on.
Check Power light. If not
lit, replace battery.
Use another headset. Call
HME. *
Call HME. *
Turn outside speaker volume
control, R59 on base
station audio circuit
board, clockwise until
volume is satisfactory.
Be certain SPEED TEAM
button on base station is
in out (OFF) position.
Check outside speaker wire
connections in base station
and at outside speaker.
Call HME. *
Be certain SPEED TEAM
button on base station is
in out (OFF) position.
Check S6 DIP switch #1 at
bottom of base station
audio circuit board. It
should be ON for fullduplex, OFF for half-duplex
operation.
Check power supply
indicator lights on base
station. If no light is
lit,
be certain AC power adapter
is plugged into AC
electrical outlet and is
connected to J16 on base
station audio circuit
board.
Circuit board may be
defective.
16
Check to see if status
lights on base station are
lit. Call HME. *
PROBLEM
Personnel hear
customers in
ceiling speaker
or headsets,
but cannot hear
each other.
No tone or
sound is heard
in ceiling
speaker or
headsets when
vehicle enters
drive-thru
lane.
PROBABLE CAUSE
Check to see if status
lights on base station are
lit. Call HME. *
Headset may be defective.
Use another headset.
HME. *
Power interruption may
have caused vehicle
detection circuit to be
out of balance.
When no vehicle is in the
drive-thru lane, press the
vehicle detector override
switch on the base station
to the RESET position, then
back to the NORMAL
position.
Be certain SPEED TEAM
button on base station is
in out (OFF) position.
Check all connectors in
base station. Call HME. *
Check all connections on
base station circuit
boards.
Be certain SPEED TEAM
button on base station is
in out (OFF) position.
Call HME. *
System may be set for
speed-team operation.
Connector may be loose.
Personnel
cannot hear
customers in
ceiling speaker
or headsets.
Headset has
intermittent
sound.
SOLUTION
Circuit board may be
defective.
There may be loose wires
on base station circuit
board.
System may be set for
speed-team operation.
Outside
circuit
failed.
Battery
Headset
speaker or audio
board may have
may be low.
may be defective.
There is still
sound in
headset after
all customers
have been
served.
Battery charger
is not working.
OVERRIDE/RESET switch on
base station may be in the
OVERRIDE (in) position.
Vehicle detector may be
locked up.
Message cannot
be recorded.
Message will
not play.
Message repeater may not
be turned on.
Charger may not be plugged
in.
Call
Replace battery.
Use another headset. Call
HME. *
Be certain switch is in the
NORMAL (out) position.
Press OVERRIDE/RESET switch
twice.
Be certain charger is
plugged in.
If it still is not working,
call HME. *
Be certain message repeater
button on bottom of base
station is in the ON (in)
position.
* For assistance, call HME at 1-800-848-4468, or Fax 858-552-0172.
900MHz wireless telephone interference —
If there is a 900MHz wireless telephone nearby, interference may
occur. Changing frequencies on the telephone and/or base station
and headset may alleviate the problem. Call HME Customer Support
at 1-800-848-4468 if assistance is required.
In the event of an electrical power outage —
such as from a lightning storm or power generator failure, if you
experience problems with your HME equipment after the electricity
comes on again, unplug the AC power adapters from their
electrical outlets, then plug them back in.
17
Figure 8.
Base station circuit boards
18
Base Station Circuit Board Adjustments
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
Wired backup system switch – S2
DM2 select switch – S1
Record message switch – S1
Message repeater ON/OFF switch – S2
Speed team switch – S3
Vehicle detector override switch – S4
Channel selector – S3
System status switch – S2
System configuration switch – S1
Ceiling speaker “ A ” channel volume control – R112
Ceiling speaker vehicle present tone volume control –
R83
Ceiling speaker inbound volume control – R84
Outside speaker volume control – R59
Line out level adjustment – R260
VAA level adjustment – R146
Outside speaker message volume control – R113
Transmit message volume control – R149
Ceiling speaker message volume control – R114
Inbound audio level adjustment – R74
VAA attenuation level adjustment – R55
Ceiling speaker “ B ” dual volume control – R1
Line in level adjustment – R20
Deviation adjustment – R29
“ B ” dual audio level adjustment – R57
Ceiling speaker “ B ” volume control – R58
Vehicle present tone level adjustment – R110
System configuration switches – S5, S6, S7, S8, S9
19
VIII. SPECIFICATIONS
Base Station
Voltage input
16VAC ±2.5V
AC current input
2.5A maximum
Audio distortion
5% maximum level
Outside speaker output 3 watts RMS into 8 ohms
Ceiling speaker power 3 watts RMS into 8 ohms
Controls/Switches
2-position vehicle detector switch (Normal –
Override/Reset)
2-position “ Speed Team ” ON/OFF switch
2-position “ Message Repeater” ON/OFF switch
1-position “ Record” switch
4-position noise reduction DIP switch
4-position RS485 bias/term DIP switch
8-position DIP switches (3 ea)
Outside speaker volume control
Outside speaker Hi-Lo volume jumper
“ A ” sidetone
“ B ” sidetone
Inbound volume control
VAA level control
Ceiling speaker volume control
Transmit message volume control
Vehicle present tone volume control
TX/RX frequency
Receive - 926.904MHz – 927.024MHz
Transmit - 902.136MHz – 903.936MHz
Dimensions
8.2 ” H x 14.2 ” W x 3.5 ” D (208 mm x 361 mm x 89
mm)
Weight
5.5 lbs (2.49 kg) maximum
HS500 Headset COMMUNICATOR
®
Battery type
Battery life
RF frequency
Weight
Controls
Indicator
3.6V Lithium ion
10 hours (typical)
Receive - 902.136MHz – 903.936MHz
Transmit - 926.904MHz – 927.024MHz
4.7 oz (.133 kg) with battery
Power ON/OFF button
Volume-up button
Volume-down button
“ A 1 ” button
“ A 2 ” button
“ B ” button
Dual-color LED (red/green)
AC40 Battery Charger
Voltage input
16.5VAC
Number of charging ports
Number of storage ports 6
Charging time
3 hrs maximum
Dimensions
7.6 ” x 4.6 ” x 2.6” (193mm x 117mm x 66mm)
Weight
1.5 lb (.68 kg)
Indicators
4 red, 4 green, 4 yellow LEDs
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2003:03:17 18:27:36-08:00
Modify Date                     : 2003:03:17 18:27:36-08:00
Page Count                      : 22
Creation Date                   : 2003:03:18 02:27:36Z
Mod Date                        : 2003:03:18 02:27:36Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : fcc
Metadata Date                   : 2003:03:18 02:27:36Z
Creator                         : fcc
Title                           : Microsoft Word - 310869.DOC

EXIF Metadata provided by EXIF.tools