HM Electronics XCVR6K1 Base Station transceiver for wireless intercom system User Manual installation manual

Download:
Mirror Download [FCC.gov]
Document ID	1147396
Application ID	aFqX03yUZx0qx/t3VdOmjg==
Document Description	installation manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.43kB (992869 bits)
Date Submitted	2009-07-30 00:00:00
Date Available	2009-07-31 00:00:00
Creation Date	2009-07-20 15:56:21
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2009-07-22 10:21:23
Document Title	Microsoft Word - Installation and Operating manual XCVR6K1.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	toms

7/20/09
Nemko USA, Inc.
11696 Sorrento Valley Rd.
San Diego CA, 92121
USA
Re: Installation and Operating instructions for Transceiver Module – XCVR6K1
HM Electronics, Inc (HME). does not plan to create an Installation and Operating manual for
this assembly. This assembly will never be sold to a third party for use in any products other
than those designed by HME. HME intends to use this assembly only as an integrated part
of other products which will be built within the guidelines of our own assembly &
documentation processes which include but are not limited to:
•
•
•
•
Labeling the FCC/IC ID on the finished product (either it’s own or the ID of the
module it contains). In the case of the XCVR6K1, the labels are shown on page 2.
Using only the approved antennas which are dictated by the bill of material that the
product is built to.
Using connectors at top level on the product which are non-standard (Reverse TNC)
A System 61000 Installation Manual. Please see page 3 for the text which shall be
included in the Installation manual pages relating to regulatory requirements.
Sincerely,
Thomas H. Stanford
Principal RF Engineer
HM Electronics Inc.
Figure 1 Module FCC Label
Figure 2 Main Unit FCC Label
Figure 3 Main Unit FCC Statement Label
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communication. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to
correct the interference at user’s own expense.
Changes or modifications not expressly approved by HM Electronics, Inc. could void the
users authority to operate this equipment.
The antenna(s) used for the base transmitter must be installed to provide a separation distance
of at least 7.87 inches (20 cm) from all persons, and must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device has been designed to operate with the antennas or antenna kits listed below, and
having a maximum gain of 2dBi. Antennas/Kits not incluced in this list or having a gain greater
than 2dBi are strictly prohibited for use with this device. The required antenna impedance is 50
ohms.
1. Antenna: NEARSON, S181TR-2450R, 2dBi
2. Antenna Kit: HME, EC20 (P/N G28493-1), 0dBi
The term “IC:” before the certification/registration number only signifies that the Industry
Canada technical specifications were met.
Hereby, HM Electronics, Inc. declares that the System 6100 is in compliance with the
essential requirements and other relevant provisions of R&TTE Directive 1999/5/EC.
This product operates in the 2400 to 2483.5 MHz frequency range. The use of this frequency range is not yet
harmonized between all countries. Some countries may restrict the use of a portion of this band or impose other
restriction relating to power level or use. You should contact your Spectrum authority to determine possible
restrictions.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2009:07:20 15:56:21Z
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:07:22 10:21:23-07:00
Metadata Date                   : 2009:07:22 10:21:23-07:00
Format                          : application/pdf
Creator                         : toms
Title                           : Microsoft Word - Installation and Operating manual XCVR6K1.doc
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:e618e45e-919d-48e8-b22d-26916c017e3d
Instance ID                     : uuid:a8e65d9e-f247-46a2-9830-0a8c9694c561
Page Count                      : 3
Author                          : toms

EXIF Metadata provided by EXIF.tools