HM Funktechnik 70TX-D UHF-Data-Transmitter Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	707301
Application ID	Csf82K8I5pRrv3CiDjPqWw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.9kB (98752 bits)
Date Submitted	2006-09-21 00:00:00
Date Available	2006-09-21 00:00:00
Creation Date	2006-08-16 16:58:46
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-08-16 16:59:01
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 6.0 für Word
Document Author:	HM Funktechnik

User Manual for the Radio Module 70TX-D
SAFETY- RF EXPOSURE COMPLIANCE
This device has been designed to use as a low power transmitter. It complies with the Federal
Communications Commission (FCC) RF exposure limits for General Population / Uncontrolled
exposure environment. In addition, it complies with the following Standards and Guidelines:
•
•
•
•
•
•
FCC 96-326 (1996), Guidelines for Evaluating the Environmental Effects of RadioFrequency Radiation.
FCC OET Bulletin 65 Edition 01-01 (2001) Supplement C, Evaluating Compliance with
FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.
ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human
Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of
Potentially Hazardous Electromagnetic Fields - RF and Microwave.
Use ONLY the supplied antenna and accessories. Unauthorized accessories may
violate the FCC rules and regulations.
The module must be installed or integrated by providing a minimum separation distance
of 20 cm between the antenna and the human body at all time.
Label Requirement:
•
1.
A label must be affixed to the outside of the end product into which the authorized
module/product is incorporated, with a statement similar to the following: “This device
contains TX with FCC ID: PUX70TX-D”
Purpose and application of the radio module 70TX-D
The 70TX-D radio transmitter is a FM-narrow bandwith type radio module. It`s a single channel,
crystal controlled device with 500mW output power on an assigned frequency in the range from
460 – 470 MHz, in 12.5 or 25 KHz spacing.
The modules are supplied by HM-Funktechnik GmbH as an OEM product and are to be
installed in customer designed peripherals, such as
•
•
•
•
•
radio remote control devices for machinery in industrial sites
burglar alarm system, data in general and voice, only in alarm conditions
data transmission in telemetry systems
data transmission in wireless hand held terminal systems
wireless data transmission in general
2.
Dimensions and connections to peripheral devices
are in mil, values in brackets are the corresponding mm values
550 (14) 835 1090 1645 ( 41.8) 1950
(21.2) (27.6)
(49.4)
205 (5.2)
1400 (36)
Ant.
St.by
Mod.
+5-8V DC
-Funktechnik GmbH, D-66620 Primstal
FCC ID: PUX 70TX-D
Made in Germany
Freq. 468,500 MHz
Ser.Nr. 550180
350 (9)
490 (12.5)
280 (7)
980 (25)
490 (12.5)
350 (9)
1950 (49.4)
125 (3.2)
2100 (53.2)
2350 (59.6)
Module hight:
500 (12.7)
Tolerance: +/- 0.2 mm
²) information shown on this label may be not identical to the label on the module
3.
Port description and technical data
+5-8V DC
supply voltage of the modul without reverse voltage protection
minimum 4.8V DC, maximum 8 V DC (continous wave)
absolut maximum rating 11V DC only with duty cycle (pay
attention to the heating of the modul)
Metal case
ground of the modul
St.by
standby pin of the modul to improve a faster startup time
open pin = transmitting mode, grounded pin = standby mode
If you don`t use this function let the pin unconnected!
Do not put some voltage to this input!
Mod.
modulation input of the modul is calibrated to TTL signals
maximum input voltage 2.5V DC + 2.5V sin(nωt)
Ant.
antenna output of the modul (impedance 50 Ω)
Modulation frequency
0 - 5 KHz
Modulation input impedance > 4.7 KΩ
Supply current
330 mA (+ / - 100mA, depends on load)
RF – output power
27 dBm +/- 1.5 dB
Frequency deviation
+/- 2.5KHz with TTL signal at the modulation port
Frequency accuracy
+ / - 1.5 KHz
Temperature stability
+ / - 2.5 KHz (- 20°C .. + 55°C)
conducted
4.
Restrictions
Do not supply a higher modulation input level to the modulation input as specified
in 3.
Do not use the 70TX-D radio modul to transmit voice
Do not build illegal spy devices using the 70TX-D radio module
Do not operate the modules at lower or higher supply voltages as specified
Do not put reverse voltage to the modul (it will be damaged)
For any further question, comments or advices, please contact HM-Funktechnik at
info@hmradio.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c9121a91-6833-40d3-84ee-a74d09c9f62c
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : GmbH
Source Modified                 : D:20060816145342
Creator Tool                    : Acrobat PDFMaker 6.0 für Word
Modify Date                     : 2006:08:16 16:59:01+02:00
Create Date                     : 2006:08:16 16:58:46+02:00
Metadata Date                   : 2006:08:16 16:59:01+02:00
Document ID                     : uuid:e7195944-a875-4db0-867f-631cdd5cb159
Format                          : application/pdf
Title                           : 
Creator                         : HM Funktechnik
Tagged PDF                      : Yes
Author                          : HM Funktechnik

EXIF Metadata provided by EXIF.tools