HMD global TA-1020 Smart Phone User Manual Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	3327682
Application ID	/gkT7Yy6hDk3UlpqdNeRTA==
Document Description	Quick Start Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.41kB (142596 bits)
Date Submitted	2017-03-22 00:00:00
Date Available	2017-09-19 00:00:00
Creation Date	2017-03-10 14:41:04
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-03-14 10:43:04
Document Title	Quick Start Guide
Document Creator	Adobe InDesign CC 2017 (Windows)

Audio connector
Microphone
Main camera
Get started
Nokia 3
Front camera
SIM cards
MicroSD card
Earpiece
Home
Charger connector
Microphone
Volume keys
Loudspeaker
Power/Lock key
TA-1020/TA-1032
EN 1.0
1.	Insert the SIM
and memory card
2.	Charge the battery
and switch your phone on
1. Open the SIM tray and memory card tray by
putting the provided tray opener into the holes
next to the trays.
2. Put the nano-SIM into the slot 1 located on the
tray with the contact area face down. If you have
a second SIM, put it into the slot 2. If you have a
memory card, put the card into the slot located on
the memory card tray.
3. Slide the SIM and memory card trays back into
the slots.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Plug a compatible charger into a wall outlet,
and connect the cable to your phone. Your phone
supports the USB micro-B cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides
you through the setup.
USB micro-B
XXXXXXXXXXX
BARCODE
USB-C
3.	Learn more about
your new Nokia
For a printable user guide, online user guide,
and troubleshooting help, go to www.nokia.com/
phones.
for Europe
Product and safety info
This device has an electronic label for certification information. To access it, select
Settings > About Phone > Certification.
You can only use your device on the GSM 850/900/1800/1900; WCDMA 1/2/5/8;
LTE 1/3/5/7/8/20/28/38/40 networks. You need a subscription with a service
provider.
Declaration of Conformity
Important: For important info on the safe use of your device and battery, read
the Product and safety info booklet before you take your device into use.
Important: 4G/LTE might not be supported by your network service provider
or by the service provider you are using when traveling. In these cases, you
may not be able to make or receive calls, send or receive messages or use mobile
data connections. To make sure your device works seamlessly when full 4G/LTE
service is not available, it is recommended that you change the highest connection
speed from 4G to 3G. To do this, on the home screen, tap Settings > Mobile
networks, and switch Preferred network type to 2G/3G.
For more info, contact your network service provider.
Maximum transmit power
GSM 900
33 dBm
DCS 1800
30 dBm
WCDMA FDD I
24 dBm
WCDMA FDD VIII
24 dBm
LTE Band 1
23 dBm
LTE Band 3
23 dBm
LTE Band 7
23 dBm
LTE Band 8
23 dBm
LTE Band 20
23 dBm
LTE Band 28
23 dBm
LTE Band 38
23 dBm
LTE Band 40
23 dBm
Bluetooth
<20 dBm
WLAN 2.4 GHz
20 dBm
WLAN 5 GHz
20 dBm
NFC		
-16.05 dBuA/m at 10m
Charge your device with FC0200 (EU plug) / FC0201 (UK plug) / FC0202 (US plug) /
FC0203 (AUS plug) / FC0211 (India plug) charger, depending on the plug type of your
country. HMD Global may make additional battery or charger models available for this
device. Third-party chargers that comply with the applicable USB requirements, and
that can connect to your device USB connector, may also be compatible. Some of the
accessories mentioned in this user guide, such as charger, headset, or data cable,
may be sold separately.
Note: The device is restricted to indoor use only when operating in the 5150 to
5350 MHz frequency range in the following countries
BE
FI
LV
RO
BG
FR
LT
SK
HR
DE
LU
SI
Hereby, HMD Global Oy declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU. A copy of the Declaration of Conformity can be found at
www.nokia.com/mobile-declaration-of-conformity.
FCC notice:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation. For more info, go to www.fcc.gov/engineeringtechnology/electromagnetic-compatibility-division/radio-frequency-safety/faq/
rf-safety. Any changes or modifications not expressly approved by HMD Global could
void the user’s authority to operate this equipment. Note: This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
© 2017 HMD Global. All rights reserved. HMD Global Oy is the exclusive licensee of
the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia
Corporation.
Your device has an internal, non-removable, rechargeable battery. Do not attempt to
remove the battery, as you may damage the device. To replace the battery, take the
device to the nearest authorised service facility.
AT
EE
IT
PT
Copyrights and other notices
CY
EL
MT
ES
CZ
HU
NL
SE
DK
IE
PL
UK
The surface of this device is nickel-free.
Use only compatible memory cards approved for use with this device. Incompatible
cards may damage the card and the device and corrupt data stored on the card.
Note: Pre-installed system software and apps use a significant part of memory
space.
Keep a safe distance when using the flash. Do not use the flash on people or animals
at close range. Do not cover the flash while taking a photo.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves as set forth by
the Council of Europe (CE) and the Federal Communications Commission (FCC).
Refer to the following.
European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the
limits for exposure to radio waves recommended by international guidelines. These
guidelines were developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all persons, regardless
of age and health. The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR.
The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device
when tested at the ear is 0.484 W/kg*. As mobile devices offer a range of functions,
they can be used in other positions, such as on the body. In this case, the highest
tested SAR value is 1.850 W/kg* at the separation distance of 0.5 cm from the body.
For electronic safety, maintain the separation distance with accessories containing
no metal, that position handset a minimum of the above distance. Use of other
accessories may not ensure compliance with RF exposure guidelines.
* The tests are carried out in accordance with international guidelines for testing.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The guidelines
are based on standards that were developed by independent scientific organization
through periodic and thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all persons, regardless
of age and health. The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the
ear and worn on the body) as required by the FCC for each model. The highest SAR
value for this model handset as reported to the FCC when tested for use at the ear is
0.76 W/kg , and when worn on the body in a holder or carry case, is 0.94W/Kg .
Body-worn Operation; This device was tested for typical body-worn operations
with the handset kept 1.5 cm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain a 1.5 cm separation distance
between the user’s body and the handset. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided. The FCC has granted an Equipment
Authorization for this model handset with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR information on this model
handset is on file with the FCC and can be found under the Display Grant section
of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1020 and FCC ID
2AJOTTA-1032.
Additional information on Specific Absorption Rates (SAR) can be found on the FCC
website at www.fcc.gov/general/radio-frequency-safety-0.
To send data or messages, a good connection to the network is needed. Sending
may be delayed until such a connection is available. Follow the separation distance
instructions until the sending is finished.
During general use, the SAR values are usually well below the values stated above.
This is because, for purposes of system efficiency and to minimise interference
on the network, the operating power of your mobile is automatically decreased
when full power is not needed for the call. The lower the power output, the lower
the SAR value.
Device models may have different versions and more than one value. Component and
design changes may occur over time and some changes could affect SAR values.
For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting
even if you are not making a voice call.
The World Health Organization (WHO) has stated that current scientific information
does not indicate the need for any special precautions when using mobile devices.
If you are interested in reducing your exposure, they recommend you limit your
usage or use a hands-free kit to keep the device away from your head and body. For
more information and explanations and discussions on RF exposure, go to the WHO
website at www.who.int/peh-emf/en.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2017:03:10 14:41:04+01:00
Creator                         : Adobe InDesign CC 2017 (Windows)
Modify Date                     : 2017:03:14 10:43:04+08:00
Has XFA                         : No
Language                        : ar-SA
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Metadata Date                   : 2017:03:10 14:41:05+01:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:b523a973-3555-40e9-b649-021a34f46e4a
Original Document ID            : xmp.did:2bcec83f-9e1a-46ee-97d6-f692dcd0ae6d
Document ID                     : xmp.id:684b93d0-dcae-5841-9713-024471220319
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:ac12292e-76d2-f842-9572-a85ace51363b
Derived From Document ID        : xmp.did:e9466321-6082-3f41-8f33-fc3f861381dd
Derived From Original Document ID: xmp.did:2bcec83f-9e1a-46ee-97d6-f692dcd0ae6d
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:03:10 14:41:04+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools