HMD global TA-1036 3G mobile phone User Manual

HMD global Oy 3G mobile phone

User manual

Download: HMD global TA-1036 3G mobile phone User Manual
Mirror Download [FCC.gov]HMD global TA-1036 3G mobile phone User Manual
Document ID3477753
Application IDZwFQuiCPe63EqZnEEtGwbg==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize40.44kB (505525 bits)
Date Submitted2017-07-23 00:00:00
Date Available2017-09-30 00:00:00
Creation Date2017-07-05 10:18:17
Producing SoftwareAcrobat Elements 15.0 (Windows)
Document Lastmod2017-07-20 17:03:38
Document Titleuntitled
Document CreatorFrameMaker 2017

EN_XX_NokiaXXX_QG_Issue0_1.fm Page 1 Monday, July 17, 2017 2:31 PM
The specific maximum SAR values can be found in the
Certification Information (SAR) section of this user guide.
For more info, go to www.sar- tick.com.
When a carry case, belt clip or other form of device holder is
used for body-worn operation, it should not contain metal
and should provide at least the above-stated separation
distance from the body. Note that mobile devices may be
transmitting even if you are not making a voice call.
Read these simple guidelines. Not following them may be
dangerous or against local laws and regulations. For
further information, read the complete user guide.
SWITCH OFF IN RESTRICTED AREAS
Switch the device off when mobile phone use is not allowed
or when it may cause interference or danger, for example, in
aircraft, in hospitals or near medical equipment, fuel,
chemicals, or blasting areas. Obey all instructions in
restricted areas.
Keys and parts
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate
the vehicle when driving. Your first consideration while
driving should be road safety.
Note: Switch the device off and disconnect the
charger and any other device before removing any
covers. Avoid touching electronic components while
changing any covers. Always store and use the device with
any covers attached.
1.Put your fingernail in the small slot at the bottom of
the phone, lift and remove the cover.
SAR
This device meets RF exposure guidelines when used either
in the normal use position against the ear or when
positioned at least 15 mm away from the body.
Camera
2.To zoom in or out, scroll up or down.
3.To end the call, press
1.To switch the camera on, select Menu >
3.To take a photo, select
Connect a compatible headset (sold separately). It acts as
an antenna.
Search for radio stations and listen to radio
Select Menu >
Your device searches for stations automatically when you
turn the radio on.
Send and receive messages
2. To save a station, select
1.Select Menu >
> + New message.
2.Type in a phone number, or select
and select a
recipient from your contacts list or groups.
3.Write your message
4.Select Send. If asked, select which SIM to use.
You can send text messages that are longer than the
character limit for a single message. Longer messages
are sent as two or more messages. Your service provider
may charge accordingly. Characters with accents, other
marks, or some language options, take more space, and
limit the number of characters that can be sent in a single
message.
1. To search for all available stations, select
tuning.
> Auto
> Add to favourites.
3.To switch to a saved station, select
> Favourites
and select a station.
4.To change the volume, scroll up or down.
5.To turn off the radio, select
Charger connector
Earpiece
Scroll key
Function key, call key
Number keys
Function key, end call/power key
Headphone connector
Camera
Flash light
Antenna area
If you need assistance after purchasing your phone, or if
you have queries on the warranty that applies to your
phone, you may contact the distributor or the store
where you bought your phone. Keep your receipt as proof
of purchase for warranty purposes.
Listen to radio
Answer a call
Press
10
After-sales support
Set which SIM card to use
To type in the + character used for international calls,
press * twice.
2.Press
. If asked, select which SIM to use.
Avoid touching the antenna area while the antenna is in
use. Contact with antennas affects the communication
quality and may reduce battery life due to higher power
level during operation.
Parts of the device are magnetic. Metallic materials may
be attracted to the device. Do not place credit cards or
other magnetic stripe cards near the device for extended
periods of time, since the cards may be damaged.
Take a photo.
1.Type in the phone number.
To unlock the keys, select Unlock and press * quickly.
BATTERIES CHARGERS AND OTHER ACCESSORIES
Use only batteries, chargers, and other accessories
approved by HMD Global for use with this device. Do not
connect incompatible products.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
Make a call
Important: This device is designed to be used with a
micro SIM card only. Use of incompatible SIM cards may
damage the card or the device and may corrupt data
stored on the card.Please consult your mobile operator
for the use of a SIM that has a nano-UICC cut-out.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
TA-1036
1.Select Menu >
> Connectivity > Dual SIM.
2.To choose which SIM to use for calls, select Preferred
SIM for calls and select SIM1, SIM2 or Ask every time.
To set the automatic key guard on, select Menu >
Security > Keyguard > Automatic keyguard and select
On.
Use only compatible memory cards approved for use with
this device. Incompatible cards may damage the card and
the device and corrupt data stored on the card.
PROTECT YOUR HEARING
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Exercise caution when holding your device near your ear
while the loudspeaker is in use.
EN 0.1
Insert the SIM, memory card and
battery
Do not connect to products that create an output signal,
as this may damage the device. Do not connect any
voltage source to the audio connector. If you connect an
external device or headset, other than those approved
for use with this device, to the audio connector, pay
special attention to volume levels.
INTERFERENCE
All wireless devices may be susceptible to interference,
which could affect performance.
KEEP YOUR DEVICE DRY
Your device is not water-resistant. Keep it dry.
XXXXXXX
11 Back cover opening slot
12 Loudspeaker
> Close radio.
Listen to music
You can listen to your MP3 music files with the music
player. To play music, you need to store the music files on
a memory card or on the phone memory.
1.Select Menu >
2. You can select Songs to see all your saved music, or
select Artists or Albums, and create your own
Playlists.
Find your model number and serial
number (IMEI)
If you need to contact your care point or your service
provider, you may need info such as the model number
and the serial number (IMEI). To see the model number,
dial *#0000#. To see the serial number, dial *#06#.
If you have a dual SIM phone, only IMEI1 is needed. You
can also find the info on your phone label, which is located
under the battery.
The IMEI is also visible on the original sales box.
Product and safety info
For info on HMD Global Oy (Ltd.) Privacy Policy, go to www.nokia.com/
en_int/phones/privacy. For the online user guide, even more info,
and troubleshooting help, go to www.nokia.com/phones.
Network services and costs
You can use your device on the GSM 850/900/1800/1900 MHz and
WCDMA 1, 2, 5, and 8 networks. You need a subscription with a
service provider.
Using some features and services, or downloading content, including
free items, require a network connection. This may cause the
transfer of large amounts of data, which may result in data costs. You
may also need to subscribe to some features.
Emergency calls
Important: Connections in all conditions cannot be guaranteed.
Never rely solely on any wireless phone for essential communications
like medical emergencies.
Before making the call:
• Switch the phone on
• If the phone keys are locked, unlock them.
Some of the accessories mentioned in this user guide,
such as charger, headset, or data cable, may be sold
separately.
Take care of your device
Handle your device, battery, charger and accessories with care.
The following suggestions help you keep your device operational.
• Keep the device dry. Precipitation, humidity, and all types of
liquids or moisture can contain minerals that corrode electronic
circuits. If your device gets wet, remove the battery, and let the
device dry.
• Do not use or store the device in dusty or dirty areas.
• Do not store the device in high temperatures. High temperatures
may damage the device or battery.
• Do not store the device in cold temperatures. When the device
warms to its normal temperature, moisture can form inside the
device and damage it.
• Do not open the device other than as instructed in the user guide.
• Unauthorized modifications may damage the device and violate
regulations governing radio devices.
• Do not drop, knock, or shake the device or the battery. Rough
handling can break it.
• Only use a soft, clean, dry cloth to clean the surface of the device.
• Do not paint the device. Paint can prevent proper operation.
• For optimal performance, switch the device off and remove the
battery from time to time.
• Keep the device away from magnets or magnetic fields.
• To keep your important data safe, store it in at least two separate
places, such as your device, memory card, or computer, or write
down important info.
Restore original settings
To reset your phone to its original settings and to remove all your
data, on the home screen, type in *#7370#.
4.If you have a memory card, slide the memory card into
the memory card slot.
5.Line up the battery contacts, and put the battery in.
6.Replace the back cover.
Remove the memory card
Open the back cover, remove the battery and pull the
memory card out.
Remove the SIM card
Open the back cover, remove the battery and slide the
SIM card out.
Switch your phone on or off
Press and hold the power key.
Note: You can set the phone to ask for a security
code. Select Menu >
> Security > Keyguard > Security
code, select Change and enter New security code.
• Move to a place with adequate signal strength.
1. Press the end key repeatedly, until the home screen is shown.
2. Type in the official emergency number for your present location.
Emergency call numbers vary by location.
3. Press the call key.
4. Give the necessary info as accurately as possible. Do not end the
call until given permission to do so.
You may also need to do the following:
• Put a SIM card in the phone.
• If your phone asks for a PIN code, type in the official emergency
number for your present location, and press the call key.
• Switch the call restrictions off in your phone, such as call barring,
fixed dialling, or closed user group.
2.If the battery is in the phone, lift it out.
3.Slide the SIM into SIM slot 1 with the contact area face
down
IM
Quick Guide
Nokia XXX
For your safety
Charge the battery
1.Plug the charger into the wall outlet.
2.Connect the charger to the phone. When done, unplug
the charger from the phone then from the wall outlet.
Recycle
When this device has reached the end of its working life, all of its
materials can be recovered as materials and energy. Recycle
packaging and user guides at your local recycling scheme. When you
cooperate and deliver all these materials to one of the available
collection sites, you contribute in helping the environment and help
to ensure the health of future generations.
All electrical and electronic products and batteries may contain
recyclable metals and other potentially hazardous substances and
must be taken to their respective collection sites at the end of their
working life. Under no circumstances should you break open a
battery or other related materials. Do not dispose of these products
as unsorted municipal waste, as this may cause contamination of the
environment or risks to human health. All HMD Global products are in
compliance with the applicable industry international production
standards and to all requirements defined by the competent
government agencies.
Crossed-out wheelie bin symbol
The crossed-out wheeled-bin symbol on your product, battery,
literature, or packaging reminds you that all electrical and electronic
products and batteries must be taken to separate collection at the
end of their working life. Do not dispose of these products as
unsorted municipal waste: take them for recycling. For info on your
nearest recycling point, check with your local waste authority.
Battery and charger info
Use your device only with an original BL-4UL rechargeable battery.
Charge your device with AC-18 charger. Charger plug type may vary.
Charging time can vary depending on device capability. Third-party
chargers that comply with the applicable CTIA requirements and bear
the USB-IF logo, and can connect to your device USB connector, may
also be compatible. Some of the accessories mentioned in this user
guide, such as charger, headset, or data cable, may be sold
separately.
HMD Global may make additional battery or charger models available
for this device.
Battery type: BL-4UL
• Theoretical talk time up to 7 hours (GSM) and 6 hours (3G)
• Theoretical standby time up to 36 days (GSM) and 30 days (3G).
Battery and charger safety
Always switch the device off and unplug the charger before removing
the battery. To unplug a charger or an accessory, hold and pull the
plug, not the cord.
When your charger is not in use, unplug it. If left unused, a fully
charged battery will lose its charge over time.
Always keep the battery between 15°C and 25°C (59°F and 77°F) for
optimal performance. Extreme temperatures reduce the capacity
and lifetime of the battery. A device with a hot or cold battery may
not work temporarily.
Accidental short-circuiting can happen when a metallic object
touches the metal strips on the battery. This may damage the battery
or the other object.
Do not dispose of batteries in a fire as they may explode. Obey local
regulations. Recycle when possible. Do not dispose as household
waste.
Do not dismantle, cut, crush, bend, puncture, or otherwise damage
the battery in any way. If a battery leaks, do not let liquid touch skin
or eyes. If this happens, immediately flush the affected areas with
water, or seek medical help. Do not modify, attempt to insert foreign
objects into the battery, or immerse or expose it to water or other
liquids. Batteries may explode if damaged.
Use the battery and charger for their intended purposes only.
Improper use, or use of unapproved or incompatible batteries or
chargers may present a risk of fire, explosion, or other hazard, and
may invalidate any approval or warranty. If you believe the battery or
charger is damaged, take it to a service centre or your phone dealer
before continuing to use it. Never use a damaged battery or charger.
Only use the charger indoors. Do not charge your device during a
lightning storm.
EN_XX_NokiaXXX_QG_Issue0_1.fm Page 2 Monday, July 17, 2017 2:31 PM
Small children
Your device and its accessories are not toys. They may contain small
parts. Keep them out of the reach of small children.
Medical devices
Operation of radio transmitting equipment, including wireless
phones, may interfere with inadequately shielded medical devices'
function. Consult a physician or the medical device's manufacturer to
determine if it is adequately shielded from external radio energy.
Implanted medical devices
To avoid potential interference, manufacturers of implanted medical
devices recommend a minimum separation of 15.3 centimetres (6
inches) between a wireless device and the medical device. Persons
who have such devices should:
• Always keep the wireless device more than 15.3 centimetres (6
inches) from the medical device.
• Not carry the wireless device in a breast pocket.
• Hold the wireless device to the ear opposite the medical device.
• Switch the wireless device off if there is any reason to suspect
that interference is taking place.
• Follow the manufacturer directions for the implanted medical
device.
If you have any questions about using your wireless device with an
implanted medical device, consult your health care provider.
Hearing
Warning: When you use the headset, your ability to hear outside
sounds may be affected. Do not use the headset where it can
endanger your safety.
Some wireless devices may interfere with some hearing aids.
Nickel
The surface of this device is nickel-free.
Vehicles
Radio signals may affect improperly installed or inadequately
shielded electronic systems in vehicles. For more info, check with the
manufacturer of your vehicle or its equipment.
Only qualified personnel should install the device in a vehicle. Faulty
installation may be dangerous and invalidate your warranty. Check
regularly that all wireless device equipment in your vehicle is
where the Product has been purchased. The seller will perform a
preliminary analysis on the Product or accessory and if found to be
defective, the Product or accessory will be replaced. When replacing
your Product, Manufacturer may use new or re-conditioned parts or
Product except where the use of such re-conditioned parts or
Product is barred by local law. In case local law should require the end
user to be informed about the use of re-conditioned parts or
Product, this Warranty document can be considered as the necessary
notice in that regard. In case local law requires consent from the end
user for the use of re-conditioned parts or Product, then such parts
or Product will not be used till such consent has been obtained.
When making a Warranty claim, you must present:
(a) The Product or accessory that has allegedly presented a Defect;
and
(b) This warranty text, duly stamped by the seller, or the invoice,
receipt or other legible and original proof of purchase, clearly
indicating the Product model and serial number, as well as the name
and the address of the seller and the place and date of purchase.
This Warranty covers all parts and components of the Product, and
includes labor costs. Manufacturer will bear the costs of transporting
the Product within its support network as part of the fulfilment of
Warranty obligations.
To the fullest extent permitted by applicable law:
a)No replacement will renew or extend the Warranty period;
b)Original Product or accessories not found to be defective will not
be replaced and will be covered by this Warranty for the remainder of
the original Warranty period;
c)Replacement Product or accessories provided under this Warranty
will be covered by this Warranty for the remainder of the original
Warranty period or for sixty (60) days from the date the replacement
Product or accessory is returned to you, whichever is longer;
d)The Product or all accessories that have been replaced become
seller’s property.
Manufacturer does not warrant that software preinstalled by or on
behalf of Manufacturer in the Product (or subsequent updates and
upgrades) (together “Manufacturer software”) will meet your
requirements, work in combination with any hardware or software
not provided by Manufacturer, be uninterrupted or error free or that
mounted and operating properly. Do not store or carry flammable or
explosive materials in the same compartment as the device, its parts,
or accessories. Do not place your device or accessories in the air bag
deployment area.
Potentially explosive environments
Switch your device off in potentially explosive environments, such as
near petrol pumps. Sparks may cause an explosion or fire resulting in
injury or death. Note restrictions in areas with fuel; chemical plants;
or where blasting operations are in progress. Areas with a potentially
explosive environment may not be clearly marked. These usually are
areas where you are advised to switch your engine off, below deck on
boats, chemical transfer or storage facilities, and where the air
contains chemicals or particles. Check with the manufacturers of
vehicles using liquefied petroleum gas (such as propane or butane) if
this device can be safely used in their vicinity.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves as
set forth by the Federal Communications Commission (FCC). Refer to
the following.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The guidelines are based on
standards that were developed by independent scientific
organization through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health. The
exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg. The tests are performed in
positions and locations (e.g. at the ear and worn on the body) as
required by the FCC for each model. The highest SAR value for this
model handset as reported to the FCC when tested for use at the ear
is 0.75 W/kg, and when worn on the body in a holder or carry case, is
0.73 W/kg.
errors are correctable or will be corrected. For Manufacturersoftware related errors, Manufacturer will make available the latest
version of the Manufacturer software for reinstallation on your
Product or, if that would not be possible, another remedy, which in
Manufacturer’s reasonable discretion, satisfactorily addresses the
error. Some Manufacturer software may be subject to separate
license terms that are available with the software.
Please always back up all data and content stored on your Product
before taking your Product in for replacement since all data in your
Product will be lost.
3. What this Warranty does not cover
Manufacturer does not provide any Warranty for the following:
A. When the Product is used in a way that is different from its ordinary
use, such as:
a) errors or damages caused by:
i) exposure to moisture, to extreme electromagnetic field (such as
damages caused by microwave oven), to dampness, to extreme
thermal or environmental conditions or to rapid changes in such
conditions, corrosion, oxidation, spillage of food or liquid, or to
influence from chemical products,
(ii) using your Product with, or connecting it to, any product,
accessory, software, or service not manufactured or supplied by
Manufacturer,
(iii) any products combined with your Product by a third party,
(iv) damage or errors caused by hacking, cracking, viruses, or other
malware, or by unauthorized access to services, accounts, computer
systems, or networks; or
(v) other acts beyond Manufacturer’s reasonable control.
b) If your Product's serial number, the mobile accessory date code, or
the IMEI number has been removed, erased, defaced, altered or if
these are illegible in any way.
B. Not using your Product in accordance with the user guide.
C. If your Product, has been (i) opened, repaired or modified by nonauthorized third parties, or (ii) repaired with unauthorized spare
parts.
D. If you have not installed the latest software updates that are
publicly available for your Product within a reasonable time of their
release.
Body-worn Operation; This device was tested for typical body-worn
operations with the handset kept 15 mm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories that
maintain a 15 mm separation distance between the user's body and
the handset. The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements, and should be avoided. The FCC
has granted an Equipment Authorization for this model handset with
all reported SAR levels evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model handset is on file
with the FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1036.
Additional information on Specific Absorption Rates (SAR) can be
found on the FCC website at www.fcc.gov/general/radio-frequencysafety-0.
To send data or messages, a good connection to the network is
needed. Sending may be delayed until such a connection is available.
Follow the separation distance instructions until the sending is
finished.
During general use, the SAR values are usually well below the values
stated above. This is because, for purposes of system efficiency and
to minimise interference on the network, the operating power of your
mobile is automatically decreased when full power is not needed for
the call. The lower the power output, the lower the SAR value.
Device models may have different versions and more than one value.
Component and design changes may occur over time and some
changes could affect SAR values.
For more info, go to www.sar-tick.com. Note that mobile devices may
be transmitting even if you are not making a voice call.
About Digital Rights Management
When using this device, obey all laws and respect local customs,
privacy and legitimate rights of others, including copyrights.
Copyright protection may prevent you from copying, modifying, or
transferring photos, music, and other content.
You won’t be able to enforce this Warranty if you refuse to give
possession of the Product to Manufacturer for analysis and
investigation.
This Warranty is not valid Outside of the Covered Country and
doesn’t cover:
1. User guides;
2. Any (i) third party software, settings, content, data, or links
installed or downloaded onto your Product at any time, or (ii)
Manufacturer and third-party services or enabling clients even if
preinstalled by Manufacturer (please read the terms and conditions
that may accompany the services as those will define your rights and
obligations);
3. Any (i) normal wear and tear, (ii) reduced charging capacity of the
battery resulting from its natural end of Product life, or (iii) pixel
defects in your Product’s display that are within the scope of industry
standards; and
4. SIM card and/or any cellular or other networks or system on which
your Product operates.
If this Warranty does not cover your Product or the issue based on
which it requires service, Manufacturer reserves the right to charge
for the repair or replacement of your Product, as well as a handling
fee.
Manufacturer has not authorized any third party to sell spare parts
and components in Latin America and the Caribbean.
4. Limitation of Manufacturer’s liability
To the extent permitted by applicable law(s), Manufacturer shall not
under any circumstances be liable, either expressly or implicitly, for
any:
1.Damages or losses of any kind whatsoever resulting from or
relating to loss of, damage to, or corruption of, content or data or the
re-creation or transfer thereof even if such loss, damage, or
corruption was a result of (i) a Defect in your Product or (ii) an attempt
to repair your Product; and/or
2.Loss of profit, productivity, functionality, business, contracts,
revenues or anticipated savings, increased costs or expenses, or for
any indirect, consequential or special loss or damage.
Copyrights and other notices
Declaration of conformity
FCC notice:
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. For more info, go to www.fcc.gov/engineeringtechnology/electromagnetic-compatibility-division/radiofrequency-safety/faq/rf-safety. Any changes or modifications not
expressly approved by HMD Global could void the user’s authority to
operate this equipment. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The contents of this document are provided “as is”. Except as
Required by applicable law, no warranties of any kind, either express
or implied, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose, are made in
relation to the accuracy, reliability or contents of this document.
HMD Global reserves the right to revise this document or withdraw it
at any time without prior notice.
To the maximum extent permitted by applicable law, under no
circumstances shall HMD Global or any of its licensors be responsible
To the extent permitted by applicable law, Manufacturer’s liability
shall be limited to the purchase value of your Product.
The limitations in this clause 4 shall not apply in case of
Manufacturer’s negligence or intentional misconduct or in case of
death or personal injury resulting from Manufacturer’s proven
negligence.
5. Other important notices
Accessories may be available for purchase at the authorized service
centers and/or points of sale.
For any further information related to your Product and how to
enforce the Warranty, please visit www.nokia.com/mobile-support
Your Product may contain country-specific elements, including
software. Also, if your Product has been re-exported from its original
destination to another country, your Product may contain countryspecific elements that are not considered a Defect under this
Warranty even if those elements or the Product would not be
operational.
for any loss of data or income or any special, incidental,
consequential or indirect damages howsoever caused.
Reproduction, transfer or distribution of part or all of the contents in
this document in any form without the prior written permission of
HMD Global is prohibited. HMD Global operates a policy of
continuous development. HMD Global reserves the right to make
changes and improvements to any of the products described in this
document without prior notice.
HMD Global does not make any representations, provide a warranty,
or take any responsibility for the functionality, content, or end-user
support of third-party apps provided with your device. By using an
app, you acknowledge that the app is provided as is.
Downloading of maps, games, music and videos and uploading of
images and videos may involve transferring large amounts of data.
Your service provider may charge for the data transmission. The
availability of particular products, services and features may vary by
region. Please check with your local dealer for further details and
availability of language options.
Certain features, functionality and product specifications may be
network dependent and subject to additional terms, conditions, and
charges. All are subject to change without notice.
Manufacturer and/or importer in EU: HMD Global Oy, Karaportti 2,
02610 Espoo, Finland.
HMD Global Privacy Policy, available at www.nokia.com/en_int/
phones/privacy, applies to your use of the device.
© 2017 HMD Global. All rights reserved. HMD Global Oy is the
exclusive licensee of the Nokia brand for phones & tablets. Nokia is a
registered trademark of Nokia Corporation.
The Bluetooth word mark and logos are owned by the Bluetooth SIG,
Inc. and any use of such marks by HMD Global is under license.
This product includes open source software. For applicable copyright
and other notices, permissions, and acknowledgements, select
*#6774# on the home screen.
Manufacturer’s limited warranty
1. General
HMD Global Oy (hereinafter “Manufacturer”) provides this
Manufacturer's Limited Warranty (“Warranty”) for the genuine Nokia
mobile phone (the “Product”) which has been released for sale in
Latin America and Caribbean. Even though one or more countries
may be mentioned herein, this Warranty is valid only in the country
where the Product was purchased through Manufacturer’s
authorised sales channels, provided that the Product was intended
for sale in that country (“Covered Country”).
This Warranty covers and includes any statutory rights under any
mandatory consumer protection laws of the Covered Country
applicable to you, and also grants you specific, and as the case may
be, additional rights, within the limits of what is permissible under
such law. This Warranty does not limit the rights you may have under
applicable consumer protection laws. You may have other rights
based on local laws during or after the Warranty period. These rights
are not excluded by this Warranty.
The Product and its accessories shall be used in accordance with the
instructions provided in the user guides and leaflets that come in the
Product package and are also available at www.nokia.com/mobilesupport.
2. Warranty
The Warranty period starts on the date the Product is sold to an end
user for the first time, as evidenced by the original proof of purchase.
Manufacturer agrees to cover under warranty defects in materials
and workmanship employed in Product manufacturing (“Defect”) for:
(i)Twelve (12) months for the main device, and
(ii) Six (6) months for the battery, charger, headset and any other
accessory included in the sales package of the main device.
The Warranty period described above includes any mandatory
Warranty term you may have in the Covered Country. As a
consequence, the first month(s) of the Warranty period described
above correspond to the mandatory Warranty term in the Covered
Country and the remaining months until completion of the period
described above correspond to the contractual Warranty term
granted by the Manufacturer.
During the Warranty period, any Defect covered by this Warranty will
be remedied within a reasonable time, free of charge, through the
replacement of the Product or accessory affected by the Defect.
During the Warranty period, in case you suspect that your Product or
any accessory has a Defect, please take it back to the point of sale

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:07:05 10:18:17Z
Creator                         : FrameMaker 2017
Modify Date                     : 2017:07:20 17:03:38+08:00
Has XFA                         : No
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Elements 15.0 (Windows)
Creator Tool                    : FrameMaker 2017
Metadata Date                   : 2017:07:18 10:33:37+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:5e85db08-28cd-4a0d-b5ab-ae02abb29c97
Instance ID                     : uuid:8b63fd3b-504e-47f6-94fe-18d9838946e1
Page Mode                       : UseOutlines
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AJOTTA-1036

Navigation menu