HMD global TA-1039 Smart phone User Manual TempConfidential PLATE QSG NAM 20170508

Download:
Mirror Download [FCC.gov]
Document ID	3383099
Application ID	ukPtACccmiwEP34G68z59Q==
Document Description	TempConfidential_PLATE QSG NAM 20170508
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.13kB (264089 bits)
Date Submitted	2017-05-09 00:00:00
Date Available	2017-11-06 00:00:00
Creation Date	2017-04-28 12:02:19
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-05-08 19:23:52
Document Title	TempConfidential_PLATE QSG NAM 20170508
Document Creator	Adobe InDesign CC 2017 (Windows)

Audio connector
Microphone
Main camera
Get started
Front camera
Nokia 6
Earpiece/Loudspeaker
SIM cards
MicroSD card
Home
Charger connector
Loudspeaker
Volume keys
Microphone
Power/Lock key
TA-1025/TA-1039
EN 1.0
1. Insert the SIM and memory 		
card
1. Open the SIM and memory card tray by putting
the provided tray opener into the hole next to the
tray.
2. Put the nano-SIM into the slot 1 with the contact
area face down. If you have a second SIM, put it
into the slot 2, or, if you have a memory card, put
the card into the memory card slot located in the
SIM slot 2.
3. Slide the SIM and memory card tray back into
the slot.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
2. Charge the battery and switch
your phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB micro-B cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides
you through the setup.
USB micro-B
XXXXXXXXXXX
USB-C
3. Learn more about your new 		
Nokia
For a printable user guide, online user guide, and
troubleshooting help, go to www.nokia.com/
phones
Product and safety info
Important: For important info on the safe use of your device and battery, read
the Product and safety info booklet before you take your device into use.
You can only use your device on the GSM 850/900/1800/1900; WCDMA 1/2/4/5/8;
LTE 2/3/4/7/12/17/28/38 networks. You need a subscription with a service provider.
Important: 4G/LTE might not be supported by your network service provider
or by the service provider you are using when traveling. In these cases, you
may not be able to make or receive calls, send or receive messages or use cellular
data connections. To make sure your device works seamlessly when full 4G/LTE
service is not available, it is recommended that you change the highest connection
speed from 4G to 3G. To do this, on the home screen, tap Settings > Cellular
networks, and switch Preferred network type to 2G/3G.
For more info, contact your network service provider.
Target transmit power
GSM 850/900
32 dBm
DCS 1800
30 dBm
PCS 1900
30 dBm
WCDMA FDD I
23 dBm
WCDMA FDD II
23 dBm
WCDMA FDD IV
23 dBm
WCDMA FDD V
23 dBm
WCDMA FDD VIII
23 dBm
LTE Band 2
23 dBm
LTE Band 3
24 dBm
LTE Band 4
23 dBm
LTE Band 7
23 dBm
LTE Band 12
23 dBm
LTE Band 17
23 dBm
LTE Band 28
23.5 dBm
LTE Band 38
23 dBm
Bluetooth
7.5 dBm
WLAN 2.4 GHz
14 dBm
11.5 dBm
WLAN 5 GHz
WLAN 5.8 GHz
10 dBm
-6.828 dBμ A/m at 10m
NFC
Your device has an internal, non-removable, rechargeable battery. Do not attempt to
remove the battery, as you may damage the device. To replace the battery, take the
device to the nearest authorized service facility.
Charge your device with FC0100 (EU plug) / FC0101 (UK plug) / FC0102 (US plug) /
FC0103 (AUS plug) / FC0111 (India plug) charger, depending on the plug type of your
country. HMD Global may make additional battery or charger models available for this
device. Third-party chargers that comply with the applicable USB requirements, and
that can connect to your device USB connector, may also be compatible. Some of the
accessories mentioned in this user guide, such as charger, headset, or data cable,
may be sold separately.
Note: The device is restricted to indoor use only when operating in the 5150 to
5350 MHz frequency range in the following countries:
The surface of this device is nickel-free.
Theoretical talk time: Up to 12 hours
Theoretical standby time: Up to 21 days (display off)
Use only compatible memory cards approved for use with this device. Incompatible
cards may damage the card and the device and corrupt data stored on the card.
Note: Pre-installed system software and apps use a significant part of
memory space.
Keep a safe distance when using the flash. Do not use the flash on people or animals
at close range. Do not cover the flash while taking a photo.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves as set forth by
the Council of Europe (CE) and the Federal Communications Commission (FCC).
Refer to the following.
European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the
limits for exposure to radio waves recommended by international guidelines. These
guidelines were developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all persons, regardless
of age and health. The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR.
The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device
when tested at the ear is 0.490 W/kg*. As mobile devices offer a range of functions,
they can be used in other positions, such as on the body. In this case, the highest
tested SAR value is 0.710 W/kg* at the separation distance of 0.5 cm from the body.
For electronic safety, maintain the separation distance with accessories containing
no metal, that position handset a minimum of the above distance. Use of other
accessories may not ensure compliance with RF exposure guidelines.
* The tests are carried out in accordance with international guidelines for testing.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government. The guidelines
are based on standards that were developed by independent scientific organization
through periodic and thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all persons, regardless
of age and health. The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC for each model. The highest SAR value
for this model handset as reported to the FCC when tested for use at the ear is 1.24
W/kg, and when worn on the body in a holder or carry case, is 0.62 W/kg.
Body-worn Operation; This device was tested for typical body-worn operations
with the handset kept 1.0 cm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain a 1.0 cm separation distance
between the user’s body and the handset. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided. The FCC has granted an Equipment
Authorization for this model handset with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR information on this model
handset is on file with the FCC and can be found under the Display Grant section
of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1025 and FCC ID
2AJOTTA-1039.
Additional information on Specific Absorption Rates (SAR) can be found on the FCC
website at www.fcc.gov/general/radio-frequency-safety-0.
To send data or messages, a good connection to the network is needed. Sending
may be delayed until such a connection is available. Follow the separation distance
instructions until the sending is finished.
During general use, the SAR values are usually well below the values stated above.
This is because, for purposes of system efficiency and to minimize interference
on the network, the operating power of your mobile is automatically decreased
when full power is not needed for the call. The lower the power output, the lower
the SAR value.
Device models may have different versions and more than one value. Component and
design changes may occur over time and some changes could affect SAR values.
For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting
even if you are not making a voice call.
The World Health Organization (WHO) has stated that current scientific information
does not indicate the need for any special precautions when using mobile devices.
If you are interested in reducing your exposure, they recommend you limit your
usage or use a hands-free kit to keep the device away from your head and body. For
more information and explanations and discussions on RF exposure, go to the WHO
website at www.who.int/peh-emf/en.
This device has an electronic label for certification information. To access it, select
Settings > About phone > Certification.
Copyrights and other notices
Declaration of Conformity
Hereby, HMD Global Oy declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU. A copy of the Declaration of Conformity can be found at www.nokia.
com/mobile-declaration-of-conformity.
FCC notice:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. For more info, go to www.fcc.gov/engineeringtechnology/electromagnetic-compatibility-division/radio-frequency-safety/faq/
rf-safety. Any changes or modifications not expressly approved by HMD Global could
void the user’s authority to operate this equipment. Note: This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
HAC notice:
Your phone is compliant with the FCC Hearing Aid Compatibility requirements.
The FCC has adopted HAC rules for digital wireless phones. These rules require
certain phone to be tested and rated under the American National Standard Institute
(ANSI) C63.19-2007 hearing aid compatibility standards. The ANSI standard for
hearing aid compatibility contains two types of ratings:
• M-Ratings: Rating for less radio frequency interference to enable acoustic
coupling with hearing aids.
• T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode.
Not all phones have been rated, a phone is considered hearing aid compatible under
FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive
coupling. These ratings are given on a scale from one to four, where four is the most
compatible. Your phone meets the M4/T3 level rating.
However, hearing aid compatibility ratings don’t guarantee that interference to your
hearing aids won’t happen. Results will vary, depending on the level of immunity of
your hearing device and the degree of your hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing device is the best way to
evaluate it for your personal needs.
This phone has been tested and rated for use with hearing aids for some of the
wireless technologies that it uses. However, there may be some newer wireless
technologies used in this phone that have not been tested yet for use with hearing
aids. It is important to try the different features of this phone thoroughly and in
different locations, using your hearing aid or cochlear implant, to determine if you
hear any interfering noise. Consult your service provider or the manufacturer of this
phone for information on hearing aid compatibility. If you have questions about
return or exchange policies, consult your service provider or phone retailer.
Hearing devices may also be rated. Your hearing device manufacturer or hearing
health professional may help you find this rating. For more information about FCC
Hearing Aid Compatibility, please go to http://www.fcc.gov/cgb/dro.
© 2017 HMD Global. All rights reserved. HMD Global Oy is the exclusive licensee of
the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia
Corporation.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States
and other countries, used with permission.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby Laboratories.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2017:04:28 12:02:19+02:00
Creator                         : Adobe InDesign CC 2017 (Windows)
Modify Date                     : 2017:05:08 19:23:52+08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : XMP Core 5.5.0
Metadata Date                   : 2017:04:28 12:02:20+02:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:3c7670aa-e616-40dd-b170-54ba596e7f32
Original Document ID            : xmp.did:2bcec83f-9e1a-46ee-97d6-f692dcd0ae6d
Document ID                     : xmp.id:aa54d3fb-fcba-d44c-82be-e1b8f65ba267
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7509721e-931a-e540-96a0-a5c1bdd650ad
Derived From Document ID        : xmp.did:7509721e-931a-e540-96a0-a5c1bdd650ad
Derived From Original Document ID: xmp.did:2bcec83f-9e1a-46ee-97d6-f692dcd0ae6d
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:04:28 12:02:19+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools