HOLUX Technology IMPULSE8050 OHR Smart band User Manual GR245

Download:
Mirror Download [FCC.gov]
Document ID	3163383
Application ID	XxGAHclYrFfDplfkaB4dTw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.82kB (772730 bits)
Date Submitted	2016-10-14 00:00:00
Date Available	2016-10-14 00:00:00
Creation Date	2016-06-28 10:34:46
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2016-10-13 11:52:31
Document Title	GR245 User Manual
Document Creator	Acrobat PDFMaker 9.1 Word 版
Document Author:	KateWang

2+56PDUWEDQG
,PSXOVH
User Manual
V1.0
HOLUX OHR Smart band I mpulse 8050
Safety instructions
•
Read this manual carefully before use to ensure safe
operation of the device.
•
The device is not a medical device and only used for the
measurement in normal exercises. Make sure the device is
worn in the correct measuring position. If you feel
uncomfortable during the exercise, stop and seek medical
advice immediately. The user must use the device carefully
and it is up to the user rather than HOLUX to take all safety
responsibilities.
•
If you feel discomfort in your skin or an allergic reaction
occurs, stop wearing the device and seek medical advice
immediately.
•
Do not use or store the device in the following environments
to avoid failure or damage.
- Don’t expose the device to extreme temperatures or
humidity or operate it in such environments;
- Do not use the device in dusty areas.
•
Though the device provides waterproof function (IPX8 water
resistance), the following instructions must be followed
when you use the device:
- Don’t soak the device or use it in water;
- Don’t take shower or sauna bath with the device worn
around the wrist to avoid affecting or damaging the
HOLUX OHR Smart band Impulse 8050
waterproof function;
- Do not rinse the device directly under a faucet to avoid
affecting or damaging the waterproof function.
•
Do not remove or replace the battery. Only well trained
service personnel are allowed to disassemble/install the
internal components. Note: Explosion may occur if the
battery is not replaced with a new one of the same model or
equivalent type. Contact the manufacturer to dispatch
professional service personnel for battery replacement.
•
Do not try to disassemble or repair device yourself to avoid
failure or device malfunction or occurrence of accidents.
HOLUX OHR Smart band Impulse 8050
Warranty Statement
•
This warranty applies to parts and services that are
manufactured and sold through HOLUX. The warranty length
is one year from date of purchase (starting from the date on
the sales receipt). Under normal user operation, HOLUX
provides free repair services.
•
HOLUX is not responsible for providing repairs or
replacements of any software; HOLUX does not provide any
warranty service for third party software/hardware.
•
Important instructions
1. Note: This warranty does not cover damage or
malfunction from the below causes: unauthorized
disassembly/modification of unit, abuse or incorrect
usage, accidental and other unpreventable causes,
operation under variables mentioned that are different
from those in this product user manual, using parts not
made or sold by HOLUX, or repairs done by anyone other
than HOLUX and authorized retail/service providers.
2. Expendable parts are not covered in the warranty.
3. HOLUX is not responsible for any program, data, or
portable storage media damages or loss. Please contact
your local HOLUX authorized service provider to learn
more about geographical limitations, proof of purchase
requests, response time agreements, and other specific
maintenance service requests.
HOLUX OHR Smart band Impulse 8050
4. The content of this user manual is subject to change
without prior notice. Please contact us if you have any
question or notice any errors in descriptions in the user
manual.
HOLUX OHR Smart band Impulse 8050
Copyright Information
No part of this manual, including the products and software
described in it, may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in
any form or by any mean, without the express written
permission of Holux Technology, Inc.
Copyright, All Rights Reserved.
HOLUX OHR Smart band Impulse 8050
Federal Communications Commission (FCC)
Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician
for help.
CAUTION: Any changes or modifications not expressly
approved by the grantee of this device could void the user's
HOLUX OHR Smart band Impulse 8050
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
RF Exposure Warning
The equipment complies with FCC RF exposure limits set forth for
an uncontrolled environment.
The equipment must not be co-located or operating in conjunction
with any other antenna or transmitter.
HOLUX OHR Smart band Impulse 8050
Content
Product Introduction .................................................... 9
Product Overview ........................................................ 10
Key function ............................................................... 11
Accessories ................................................................. 12
Charging the Battery.................................................... 13
Wear the Smartband .................................................... 15
Maintenance of the product .......................................... 15
How to use Impulse 8050 .......................................... 16
Menu function ............................................................. 17
Main screen ............................................................. 17
Legends................................................................... 21
APP Installation ......................................................... 22
Normal Care and Maintenance .................................... 26
Specification............................................................... 28
HOLUX OHR Smart band Impulse 8050
Product Introduction
Thank you for purchasing HOLUX Heart-Rate Smartband
Impulse 8050.
Impulse 8050 is a smartband designed for people who are in
pursuit of a healthy lifestyle and convenience in exercising. It
has the most advanced integrated physical monitoring
technology and can accurately measure the heart-rate for long
periods continuously so that users can monitor their heart and
lung functions and exercise effectiveness. It can also detect
when the user is tired and notify him/her to drive safely. It also
uses the steps function to help remind the amount of daily
exercise achieved.
Impulse 8050 supports Bluetooth pairing with various
smartphones to record their exercising status. It can also be
used with a dedicated APP to help tracking the exercising results.
Results are integrated into cloud data to perform analysis and
management of the physical conditions.
HOLUX OHR Smart band Impulse 8050
Product Overview
Front View
Screen
Function
Switch
Key
Rear View
OHR
Charging p ort
10
HOLUX OHR Smart band Impulse 8050
Key function
Key
Operation and Function
Switch function: Press the key for 1 second
to switch Time/ Step/ Heart-rate/ Fatigue
function.
Enable/ disable function: In Heart-rate and
Function Switch
Fatigue function page, press and hold the
Key
key for 3 seconds to Enable/ disable the
Heart-rate and Fatigue function.
Press and hold the key for 12 seconds to
reset the system if the device cannot operate
normally.
11
HOLUX OHR Smart band Impulse 8050
Accessories
Check the box for the following supplied accessories. If any is
missing, contact your supplier immediately.
Impulse 8050
Charging cradle
12
Quick Guide
HOLUX OHR Smart band Impulse 8050
Charging the Battery
Before using your Impulse 8050 for the first time, you need to
charge it for approximately 2 hours.
As following figure, clip the Impulse 8050 into the charging
cradle, ensuring that the metal terminals are in contact. Using
the AC charger or connect to the USB port of the PC for
charging.
※ Make sure the product is placed in the correct direction;
otherwise, the product or the cradle could be damaged.
13
HOLUX OHR Smart band Impulse 8050
Using the AC charger (Optional)
Connect the cradle to the optional AC adapter, then insert the AC
adapter into a power outlet.
Connecting to a PC
Insert the cradle's USB cable into a free USB port on your PC.
14
HOLUX OHR Smart band Impulse 8050
Wear the Smartband
When using Impulse 8050, wear your device on the wrist below
the wrist bone as shown in the following figure. To measure the
heart rate correctly, make sure the strap fits snugly around the
wrist to ensure the wristband is pressed against the skin.
Wrist bone
Maintenance of the product
•
You can use a damp cloth to wipe the wristband or use gentle
soap solution to remove oil or dirt.
•
Use a wet cotton swab to clean the area around the sensor.
Clean it every week if you use the product frequently.
•
Be careful not to scratch the sensor part to avoid damage.
•
Keep the wristband away from any powerful chemical agents,
such as gasoline and acetone, to avoid damage.
15
HOLUX OHR Smart band Impulse 8050
How to use Impulse 8050
Make sure the battery is fully charged (charging time: about 2
hours) before using the product to ensure normal operation of
the system. When using the device for the first time, long press
the [Function Switch Key] for 6 seconds to enable the device.
Function
Switch
Key
16
HOLUX OHR Smart band Impulse 8050
Menu function
The time page appears once you start to use the device. Press
the [Function Switch Key] to switch function pages. The
following table lists the available functions.
Main screen
Time Function: Display current time.
※ Time calibration: using the Bluetooth
connection, Impulse APP can be used
to calibrate time.
Step Function: Calculate and record the
number of steps users have walked.
Heart-rate Measurement: Perform
continuous and long term heart-rate
measurement.
※ Enable/ Disable Heart-rate
Measurement:
In the heart-rate measurement
function page, press and hold the
[function Switch Key] for 3 seconds to
Enable/ disable the function. Once the
17
HOLUX OHR Smart band Impulse 8050
function is enabled, the icon will be
displayed as “solid”.
→
※ After enabling the heart-rate
measurement function, please first
remain stationary for about 20-30
seconds. A big and small heart symbol
(beating continuously) will be
displayed on the screen. When the
device detects heart-rate status, the
device will vibrate for 3 seconds. The
screen will also display the number and
zone of heart-rate.
→
※ The Impulse APP can be used to set
heart-rate zone. The heart-rate zone
1-5 as shown in the following figures.
※ If the heart-rate value is not displayed
18
HOLUX OHR Smart band Impulse 8050
after 2 minutes of detection, the device
will disable detection automatically.
Please verify the position where the
smartband is worn and perform the
measurement again. Then, wait until
the smartband detects the heartbeat
before starting normal activities.
→
Fatigue Detection: Display the number of
fatigues.
※ Enable/ Disable Fatigue Detection:
In the fatigue detection function page,
press and hold the [function Switch
Key] for 3 seconds to Enable/ disable
the function. Once the function is
enabled, the icon will be displayed as
“solid”.
→
※ When monitoring fatigue status, the
heart-rate measurement function will
be enabled automatically. The screen
will display the number of fatigues.
19
HOLUX OHR Smart band Impulse 8050
Bluetooth connection and battery status:
Display the Bluetooth connection and
power status.
※ When pairing with Bluetooth, the
screen will display a link symbol.
※ Power level display:
Power level 65~100%;
Power level 35~65%;
Power level 10~35%;
Power level <10%; a low power
message appears.
Low Power：In low power
status, short press [Function Switch Key]
will only enter Time function.
In charging status: When
20
HOLUX OHR Smart band Impulse 8050
charging, short press [Function Switch
Key] is not work. After charging is
completed, the screen will show battery
status page.
Legends
Insufficient memory space: indicates the
memory usage is more than 90%. Short
press [Function Switch Key] to close the
page. This page will appear every ten
minutes, until synchronize/ upload data to
APP and memory usage is less than 90%.
※ When the memory capacity has been
reached, the device will continue to
record (the step and heart-rate value)
and overwrite the oldest information
on the memory.
Synchronize/ upload data: indicates the
data is synchronized and uploaded to APP.
After uploading, the page will close
automatically.
Update FW
The page will close automatically after the
FW update is finished.
21
HOLUX OHR Smart band Impulse 8050
APP Installation
Using the Bluetooth connection, this device can be used with the
Impulse APP installed on your smartphone. The Impulse APP
can be used to display related activity and training records.
Step 1: On your smartphone, go to the Google Play Store,
search for the “Impulse” APP. Then download and install the APP.
※ Please confirm that both the “Internet Communication” and
“Bluetooth” functions on the smartphone are enabled.
For more information on related smartphone operations,
please refer to the instructions in the user manual of the
smartphone.
Step 2: Launch the Impulse APP
Step 3: Follow the on-screen instructions to complete account
registration and related settings.
※ Please enable the “Bluetooth” function on the smartphone
and connect to the Internet either using Wi-Fi or 3G
connection.
22
HOLUX OHR Smart band Impulse 8050
Register and Login
→
→
Device pairing and binding (make sure the Bluetooth functions
on both the smartphone and Impulse 8050 are enabled)
→
→
※ If you do not want to bind to a device, select “Ignore and
Next”.
23
HOLUX OHR Smart band Impulse 8050
Basic Data Setting
→
→
→
→
→
You can start using the Impulse APP after completing the
settings.
24
HOLUX OHR Smart band Impulse 8050
Remove Device Pairing and Binding
The device information under the “Setup” function can be used
to remove device binding.
→
→
→
→
25
HOLUX OHR Smart band Impulse 8050
Normal Care and Maintenance
To ensure the unit’s normal operation and extended life span,
please note the following while using and storing:
• Do not drop the unit
If violently impacted or shocked, serious damage may be
caused.
• Avoid sudden temperature changes
Condensation may occur when entering a warm room on a
cold day. To prevent condensation from damaging the unit,
please place into an airtight plastic bag before sudden
temperature changes.
• Keep away from strong magnetic fields
When using or storing, please keep away from strong
electromagnetic/ radioactive or magnetic field equipment.。
• Operating temperature
The products operating temperature is between 0°C ~ 60°C;
please do not operate under extreme temperatures.
• Avoid exposure to sunlight
Please avoid long periods of sunlight or high temperature
exposure.
• Cleaning the screen
Using a soft clean cloth to wipe the screen is recommended;
do not use ordinary tissue to wipe the screen.
• Do not disassemble
26
HOLUX OHR Smart band Impulse 8050
Please do not disassemble the product, this may void the
warranty and damage the unit.
• Storage
When the product is not being used for a long period, store
the device in a cool and dry place. For long-term storage,
keeping the unit in a dry box is recommended.
Please do not keep the product in the following
environments:
• Unventilated and humid locations.
• In an environment where humidity is over 90%.
27
HOLUX OHR Smart band Impulse 8050
Specification
Processor
Low power 32bit processor
Memory
4MB for activity log
Display
0.5” OLED screen
Sensor
Optical Heart Rate (OHR) Sensor
G-sensor
Bluetooth
4.0 low energy (BLE)
Battery
Rechargeable Li-ion
Time mode: 11 days (Disable heart-rate
measurement function)
Normal operation: 6 days (Enable heart-rate
measurement function on average one hour
per day)
Continuous OHR Mode：10 hours
Dimension
56.5(W)x21.7(L)x10(H)mm
Weight
15g
Mobile
application
Waterproof
Android/ iOS
IPX8
28

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : KateWang
Create Date                     : 2016:06:28 10:34:46+08:00
Modify Date                     : 2016:10:13 11:52:31+08:00
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2016:10:13 11:52:31+08:00
Creator Tool                    : Acrobat PDFMaker 9.1 Word 版
Document ID                     : uuid:6595e2b2-d14d-4575-97c7-fde3f644aee0
Instance ID                     : uuid:361aaad6-a3d1-4be4-b439-5811ca04acc1
Format                          : application/pdf
Title                           : GR245 User Manual
Description                     : 
Creator                         : KateWang
Producer                        : Adobe PDF Library 9.0
Keywords                        : 
Source Modified                 : D:20160628023437
Company                         : 
Page Layout                     : OneColumn
Page Count                      : 30

EXIF Metadata provided by EXIF.tools