HOLUX Technology IMPULSE8060 Heart-Rate Smartband User Manual Impulse 8060 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3850167
Application ID	V+ZJ5O56V/o4D+o+xqMfuQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	387.94kB (4849305 bits)
Date Submitted	2018-05-15 00:00:00
Date Available	2018-05-17 00:00:00
Creation Date	2018-05-15 10:10:59
Producing Software	Microsoft: Print To PDF
Document Lastmod	2018-05-15 10:10:59
Document Title	Microsoft Word - (Impulse 8060)UserMan
Document Author:	A146659

Heart-Rate Smartband
Impulse 8060
User Manual
V1.0
HOLUX Heart-Rate Smartband Impulse 8060
Safety instructions

Read this manual carefully before use to ensure safe
operation of the device.

The device is not a medical device and only used for the
measurement in normal exercises. Make sure the device is
worn in the correct measuring position. If you feel
uncomfortable during the exercise, stop and seek medical
advice immediately. The user must use the device carefully
and it is up to the user rather than HOLUX to take all safety
responsibilities.

If you feel discomfort in your skin or an allergic reaction
occurs, stop wearing the device and seek medical advice
immediately.

Do not use or store the device in the following environments
to avoid failure or damage.
- Don’t expose the device to extreme temperatures or
humidity or operate it in such environments;
- Do not use the device in dusty areas.

Though the device provides waterproof function (IPX8 water
resistance), the following instructions must be followed
when you use the device:
- Don’t soak the device or use it in water;
- Don’t take shower or sauna bath with the device worn
around the wrist to avoid affecting or damaging the
HOLUX Heart-Rate Smartband Impulse 8060
waterproof function;
- Do not rinse the device directly under a faucet to avoid
affecting or damaging the waterproof function.

Do not remove or replace the battery. Only well trained
service personnel are allowed to disassemble/install the
internal components. Note: Explosion may occur if the
battery is not replaced with a new one of the same model or
equivalent type. Contact the manufacturer to dispatch
professional service personnel for battery replacement.

Do not try to disassemble or repair device yourself to avoid
failure or device malfunction or occurrence of accidents.
HOLUX Heart-Rate Smartband Impulse 8060
Warranty Statement

This warranty applies to parts and services that are
manufactured and sold through HOLUX. The warranty length
is one year from date of purchase (starting from the date on
the sales receipt). Under normal user operation, HOLUX
provides free repair services.

HOLUX is not responsible for providing repairs or
replacements of any software; HOLUX does not provide any
warranty service for third party software/hardware.

Important instructions
1. Note: This warranty does not cover damage or
malfunction from the below causes: unauthorized
disassembly/modification of unit, abuse or incorrect
usage, accidental and other unpreventable causes,
operation under variables mentioned that are different
from those in this product user manual, using parts not
made or sold by HOLUX, or repairs done by anyone other
than HOLUX and authorized retail/service providers.
2. Expendable parts are not covered in the warranty.
3. HOLUX is not responsible for any program, data, or
portable storage media damages or loss. Please contact
your local HOLUX authorized service provider to learn
more about geographical limitations, proof of purchase
requests, response time agreements, and other specific
maintenance service requests.
HOLUX Heart-Rate Smartband Impulse 8060
4. The content of this user manual is subject to change
without prior notice. Please contact us if you have any
question or notice any errors in descriptions in the user
manual.
HOLUX Heart-Rate Smartband Impulse 8060
Copyright Information
No part of this manual, including the products and software
described in it, may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in
any form or by any mean, without the express written
permission of Holux Technology, Inc.
Copyright, All Rights Reserved.
HOLUX Heart-Rate Smartband Impulse 8060
Federal Communications Commission (FCC)
Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.
HOLUX Heart-Rate Smartband Impulse 8060
CAUTION:
Any changes or modifications not expressly approved by the
grantee of this device could void the user's authority to operate
the equipment.
RF exposure warning:
The equipment complies with FCC RF exposure limits set forth
for an uncontrolled environment.
The equipment must not be co-located or operating in
conjunction with any other antenna or transmitter.
HOLUX Heart-Rate Smartband Impulse 8060
Content
Product Introduction .................................................... 9
Product Overview ........................................................ 10
Key function ............................................................... 11
Accessories ................................................................. 12
Charging the Battery.................................................... 13
Wear the Smartband .................................................... 15
Maintenance of the product .......................................... 15
How to use Impulse 8060 .......................................... 16
Menu function ............................................................. 17
Main screen ............................................................. 17
Legends................................................................... 23
APP Installation ......................................................... 24
Normal Care and Maintenance .................................... 28
Specification............................................................... 30
HOLUX Heart-Rate Smartband Impulse 8060
Product Introduction
Thank you for purchasing HOLUX Heart-Rate Smartband
Impulse 8060.
Impulse 8060 is a smartband designed for people who are in
pursuit of a healthy lifestyle and convenience in exercising. It
has the most advanced integrated physical monitoring
technology and can accurately measure the heart-rate for long
periods continuously so that users can monitor their heart and
lung functions and exercise effectiveness. It can also provides
sleep analyses and uses the steps and Calorie function to help
remind the amount of daily exercise achieved.
Otherwise, it add a function which can raise to wake the display,
let users are more convenience to see info.
Impulse 8060 supports Bluetooth pairing with various
smartphones to be used to remind users of incoming calls and
messages, and record their exercising status. It can also be
used with a dedicated APP to help tracking the exercising results.
Results are integrated into cloud data to perform analysis and
management of the physical conditions.
HOLUX Heart-Rate Smartband Impulse 8060
Product Overview
Front View
Screen
Function
Switch
touch Key
Rear View
OHR
10
HOLUX Heart-Rate Smartband Impulse 8060
Key function
Key
Operation and Function
Switch function: Touch the key shortly to
switch Time/ Step-Calorie/ Heart-rate
function.
Function Switch
Key
Enable/ disable function: In Heart-rate
function page, Touch and hold the key for 3
seconds to Enable/ disable the Heart-rate.
If the Impulse 8060 cannot operate
normally, please run out the battery, then
charging it to reset the system.
11
HOLUX Heart-Rate Smartband Impulse 8060
Accessories
Check the box for the following supplied accessories. If any is
missing, contact your supplier immediately.
Impulse 8060
Quick Guide
12
HOLUX Heart-Rate Smartband Impulse 8060
Charging the Battery
Before using your Impulse 8060 for the first time, you need to
charge it for approximately 2 hours.
As following figure, takes off the Impulse 8060’s watchstrap,
then using the USB adapter or connect to the USB port of the PC
for charging. Make sure Impulse 8060 will vibrate and show a
flashing icon after Inserting the device’s USB plug to charging.
USB plug
13
HOLUX Heart-Rate Smartband Impulse 8060
Using the USB adapter (Optional)
Connect the Impulse 8060’s USB plug cradle to the optional USB
adapter, then insert the USB adapter into a power outlet.
Connecting to a PC
Insert Impulse 8060’s USB plug into a free USB port on your PC.
14
HOLUX Heart-Rate Smartband Impulse 8060
Wear the Impulse 8060
When using Impulse 8060, wear your Impulse 8060 on the wrist
below the wrist bone as shown in the following figure. To
measure the heart rate correctly, make sure the strap fits snugly
around the wrist to ensure the Impulse 8060 is pressed against
the skin.
Wrist bone
Maintenance of the product

You can use a damp cloth to wipe the Impulse 8060 or use
gentle soap solution to remove oil or dirt.

Use a wet cotton swab to clean the area around the sensor.
Clean it every week if you use the product frequently.

Be careful not to scratch the sensor part to avoid damage.

Keep the Impulse 8060 away from any powerful chemical
agents, such as gasoline and acetone, to avoid damage.
15
HOLUX Heart-Rate Smartband Impulse 8060
How to use Impulse 8060
Make sure the battery is fully charged (charging time: about 2
hours) before using Impulse 8060 to ensure normal operation of
the system. When using the Impulse 8060 for the first time,
long press the [Function Switch Key] for 6 seconds to enable
Impulse 8060.
Function
Switch
touch Key
Startup screen
16
HOLUX Heart-Rate Smartband Impulse 8060
Menu function
The time page appears once you start to use the Impulse 8060.
Touch the [Function Switch touch Key] to switch function pages.
The following table lists the available functions.
Main screen
Time Function: Display current time.
hour
minute
month/ date
※ Time calibration: using the Bluetooth
connection, Impulse APP can be used
to calibrate time.
Screen lock
Unread Messages prompt on mobile
phone
Missed Calls prompt on mobile
phone
17
HOLUX Heart-Rate Smartband Impulse 8060
Connected to mobile phone via
Bluetooth
Power level display
Power level 65~100%;
Power level 35~65%;
Power level 10~35%;
Power level <10%; a low power
message appears.
Step Function: Calculate and record
the number of steps users have walked.
※ Impulse 8060 lets you know when you reach
your goals.
Calorie Calculation : calculate and
display calorie consumption.
18
HOLUX Heart-Rate Smartband Impulse 8060
※ Impulse 8060 lets you know when you reach
your goals.
Heart-rate Measurement: Perform
continuous and long term heart-rate
measurement.
※ Enable/ Disable Heart-rate
Measurement:
In the heart-rate measurement
function page, touch and hold the
[function Switch touch Key] for 3
seconds to Enable/ disable the
function. Once the function is enabled,
the icon will be displayed as “solid”.
→
19
HOLUX Heart-Rate Smartband Impulse 8060
※ After enabling the heart-rate
measurement function, please first
remain stationary for about 20-30
seconds. A big and small heart symbol
(beating continuously) will be
displayed on the screen. When Impulse
8060 detects heart-rate status,
Impulse 8060 will vibrate for 3
seconds. The screen will also display
the number and zone of heart-rate.
→
※ The Impulse APP can be used to set
heart-rate zone. The heart-rate zone
1-5 as shown in the following figures.
20
HOLUX Heart-Rate Smartband Impulse 8060
※ If the heart-rate value is not displayed
after 2 minutes of detection, Impulse
8060 will disable detection
automatically. Please verify the
position where Impulse 8060 is worn
and perform the measurement again.
Then, wait until Impulse 8060 detects
the heartbeat before starting normal
activities.
→
21
HOLUX Heart-Rate Smartband Impulse 8060
Unread Messages prompt on mobile
phone.
Missed Calls prompt on mobile phone
Bluetooth connection and battery status:
Display the Bluetooth connection and
power status.
※ When pairing with Bluetooth, the
screen will display a link symbol.
Low Power：In low power status, touch
[Function Switch touch Key] will only
enter Time function.
22
HOLUX Heart-Rate Smartband Impulse 8060
In charging status: When charging,
touch[Function Switch touch Key] does
not work. After charging is completed, the
screen will show battery status page.
Legends
Insufficient memory space: indicates
the memory usage is more than 90%.
Short press [Function Switch touch Key]
to close the page. This page will appear
every ten minutes, until synchronize/
upload data to APP and memory usage is
less than 90%.
※ When the memory capacity has been
reached, Impulse 8060 will continue to
record (the step and heart-rate value)
and overwrite the oldest information
on the memory.
Synchronize/ upload data: indicates the
data is synchronized and uploaded to APP.
After uploading, the page will close
automatically.
23
HOLUX Heart-Rate Smartband Impulse 8060
Update FW
The page will close automatically after the
FW update is finished.
24
HOLUX Heart-Rate Smartband Impulse 8060
APP Installation
Using the Bluetooth connection, this device can be used with the
Impulse APP installed on your smartphone. The Impulse APP
can be used to display related activity and training records.
Step 1: On your smartphone, go to the Google Play Store,
search for the “Impulse” APP. Then download and install the APP.
※ Please confirm that both the “Internet Communication” and
“Bluetooth” functions on the smartphone are enabled.
For more information on related smartphone operations,
please refer to the instructions in the user manual of the
smartphone.
Step 2: Launch the Impulse APP
Step 3: Follow the on-screen instructions to complete account
registration and related settings.
※ Please enable the “Bluetooth” function on the smartphone
and connect to the Internet either using Wi-Fi or 3G/4G
connection.
25
HOLUX Heart-Rate Smartband Impulse 8060
Register and Login
→
→
Device pairing and binding (make sure the Bluetooth functions
on both the smartphone and Impulse 8060 are enabled)
→
→
※ If you do not want to bind to a device, select “Ignore and
Next”.
26
HOLUX Heart-Rate Smartband Impulse 8060
Basic Data Setting
→
→
→
→
→
You can start using the Impulse APP after completing the
settings.
27
HOLUX Heart-Rate Smartband Impulse 8060
Remove Device Pairing and Binding
The device information under the “Setup” function can be used
to remove device binding.
→
→
→
→
28
HOLUX Heart-Rate Smartband Impulse 8060
Normal Care and Maintenance
To ensure the unit’s normal operation and extended life span,
please note the following while using and storing:
 Do not drop the unit
If violently impacted or shocked, serious damage may be
caused.
 Avoid sudden temperature changes
Condensation may occur when entering a warm room on a
cold day. To prevent condensation from damaging the unit,
please place into an airtight plastic bag before sudden
temperature changes.
 Keep away from strong magnetic fields
When using or storing, please keep away from strong
electromagnetic/ radioactive or magnetic field equipment.。
 Operating temperature
The products operating temperature is between 0°C ~ 60°C;
please do not operate under extreme temperatures.
 Avoid exposure to sunlight
Please avoid long periods of sunlight or high temperature
exposure.
 Cleaning the screen
Using a soft clean cloth to wipe the screen is recommended;
do not use ordinary tissue to wipe the screen.
 Do not disassemble
29
HOLUX Heart-Rate Smartband Impulse 8060
Please do not disassemble the product, this may void the
warranty and damage the unit.
 Storage
When the product is not being used for a long period, store
Impulse 8060 in a cool and dry place. For long-term storage,
keeping the unit in a dry box is recommended.
Please do not keep Impulse 8060 in the following
environments:
 Unventilated and humid locations.
 In an environment where humidity is over 90%.
30
HOLUX Heart-Rate Smartband Impulse 8060
Specification
Processor
Low power 32bit processor
Memory
2MB for activity log
Display
0. 96’’ TFT LCD Color screen
Sensor
Optical Heart Rate (OHR) Sensor
G-sensor
Bluetooth
4.0 low energy (BLE)
Battery
Rechargeable Li-ion
Time mode: 11 days (Disable heart-rate
measurement function)
Normal operation: 6 days (Enable heart-rate
measurement function on average one hour
per day)
Continuous OHR Mode：10 hours
Dimension
51(W)x20(L)x13(H)mm
Weight
15g
Mobile
application
Waterproof
Android/ iOS
IP68
31

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Info object (238 0 obj) not found at 4844238

EXIF Metadata provided by EXIF.tools