HON HAI PRECISION IND J07H06903 802.11a/b/g WLAN Mini PCI Module User Manual Hardware Guide

Download:
Mirror Download [FCC.gov]
Document ID	382293
Application ID	e46gEQeXxLJouE6RF7dwhA==
Document Description	Host laptop users manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	249.31kB (3116417 bits)
Date Submitted	2003-12-17 00:00:00
Date Available	2003-12-18 00:00:00
Creation Date	2003-12-12 13:30:21
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-12-12 13:30:35
Document Title	Hardware Guide
Document Creator	FrameMaker 7.0
Document Author:	Hewlett-Packard Development Company, L.P.

331734-001.book Page 1 Monday, July 14, 2003 3:47 PM
Network Connections
The tablet PC has an RJ-45 network jack. Network tablet PC
models also have an internal NIC (network interface card),
preinstalled network drivers, and a network cable.
The tablet PC can be connected to a network whether or not the
internal modem is connected to a telephone line.
If your tablet PC is connected to a network, you may want to
confer with your network administrator before changing network
settings.
The tablet PC supports network speeds up to 10 Mbps when
connected to a 10BaseT network and 100 Mbps when connected
to a 100BaseTX network.
Hardware Guide
7–1
331734-001.book Page 2 Monday, July 14, 2003 3:47 PM
Network Connections
Connecting the Network Cable
A network cable has an 8-pin RJ-45 network connector at each
end and may contain noise suppression circuitry, which prevents
interference with TV and radio reception.
1. To access the tablet PC RJ-45 network jack 1, open the upper
panel of the tablet PC.
2. Orient the end of a network cable with noise suppression
circuitry 2 toward the tablet PC.
3. Plug the network cable into the tablet PC RJ-45 network
jack 3.
4. Plug the other end of the cable into the network RJ-45
jack 4.
Connecting a network cable
Å
7–2
WARNING: To reduce the risk of electric shock, disconnect
the network cable before accessing an internal compartment of the
tablet PC. Internal compartments include the memory and mini PCI
compartment and the hard drive bay.
Hardware Guide
331734-001.book Page 3 Monday, July 14, 2003 3:47 PM
Network Connections
Turning a Network Connection Off
and On
To conserve power, turn off a network connection you are not
using.
■
To turn off a network connection, log off the network, then
disconnect the network cable.
■
To turn on a network connection, connect the network cable,
then log on to the network.
Using the LAN Connection Lights
The 2 LAN connection lights indicate the status of a network
connection:
■
Both lights off: The tablet PC is not connected to a LAN.
■
Both lights on: The tablet PC is connected to a LAN with
a 100 Mbps link.
■
Green light on and yellow light off: The tablet PC is
connected to a LAN with a 10 Mbps link.
Identifying the LAN connection lights
Hardware Guide
7–3
331734-001.book Page 4 Monday, July 14, 2003 3:47 PM
Network Connections
Accessing the Network at Startup
To connect to a PXE (Preboot eXecution Environment) or RPL
(Remote Program Load) server during startup, you must respond
to the Network Service Boot prompt each time you want to
connect to the server as the tablet PC starts or restarts.
To set the tablet PC to display the Network Service Boot prompt
each time it is started or restarted, you must enable the internal
NIC for startup.
Enabling a NIC for Startup
An internal NIC is enabled for startup in the Setup utility.
1. To open the Setup utility, turn on or restart the tablet PC.
While the HP logo is displayed and a cursor is flashing in
the upper right corner of the screen, press the esc button
on the tablet PC or press F10 on an optional keyboard.
2. To change the language, select Advanced > Languages.
❏
To navigate and select without using an optional
keyboard, rotate the jog dial to scroll and press the jog
dial inward to select.
❏
To navigate and select using an optional keyboard, use
the arrow and enter keys.
3. Select Advanced menu > I/O Device Configuration, then
enable PXE/Remote Boot.
4. To save your preference and exit the Setup utility, select
File > Save Changes and Exit, then follow the instructions
on the screen.
Your preference is set as you exit the Setup utility and is in effect
when the tablet PC restarts.
7–4
Hardware Guide
331734-001.book Page 5 Monday, July 14, 2003 3:47 PM
Network Connections
Responding to a Network Service Boot
Prompt
After the internal NIC has been enabled for startup, the Network
Service Boot prompt is displayed very briefly in the lower right
corner of the screen each time the tablet PC is started or restarted.
To connect to a network by responding to the prompt, use either
of the following procedures:
■
Press the tab button on the tablet PC.
■
Press F12 on an optional keyboard. To press F12 on the
tablet PC keyboard, press Fn+F11/F12.
Finding Wireless LAN Information
The tablet PC supports wireless LAN provided through a
mini PCI board, a PC Card, or an SD Card. A wireless LAN
PC Card or an SD Card is optional. A wireless mini PCI board
may be preinstalled.
■
Information about using a preinstalled wireless LAN board is
provided on the Documentation Library Wireless LAN CD
included with your tablet PC.
■
Information about the Bluetooth wireless option is provided
on the Documentation Library Bluetooth CD included with
your tablet PC.
■
Information about Microsoft’s Wireless LAN configuration
utility is available in the Help & Support Center, which is
accessible from the Start Menu.
If you purchase a wireless device as an option, documentation
about the device is included with the option.
Hardware Guide
7–5
331734-001.book Page 1 Monday, July 14, 2003 3:47 PM
External Device Connections
Standard Device
The jacks and connectors described in this guide support standard
external devices.
■
For information about which jack or connector to use, refer to
the documentation included with the device.
■
For information about installing or loading any software
required by the device, refer to the device documentation, the
operating system Help files, or the device manufacturer’s
Web site.
To connect a standard external device to the tablet PC:
1. If you are connecting a powered device, be sure the device is
turned off.
2. Connect the device to a jack or connector on the tablet PC.
3. If you are connecting a powered device, plug the device
power cord into a grounded electrical outlet.
4. Turn on the device.
properly connected display device does not display an image,
✎ Iftryapressing
the Q menu button > Internal and External item or
External Only item to switch the image to the new device.
To disconnect a standard external device from the tablet PC, turn
off the device (if it is powered), then disconnect the device from
the tablet PC.
Hardware Guide
8–1
331734-001.book Page 2 Monday, July 14, 2003 3:47 PM
External Device Connections
USB Device
USB is a hardware interface that can be used to connect external
devices such as a USB keyboard, mouse, drive, printer, scanner,
or hub to the tablet PC or an optional Docking Station.
A USB device functions in the system in the same way as a
comparable non-USB device. The USB connectors support
USB 2.0- or 1.1-compliant devices.
A USB hub is a connecting device that can be powered or
unpowered. USB hubs can be connected to a USB connector on
the tablet PC or on an optional Docking Station or to other USB
devices. Hubs support varying numbers of USB devices and are
used to increase the number of USB devices in the system.
■
Powered hubs must be connected to external power.
■
Unpowered hubs must be connected either to a USB
connector on the tablet PC or to a port on a powered hub.
Some USB devices may require additional support software,
which is usually included with the device. For software
information about a specific device, refer to the documentation
included with the device.
Identifying the 2 USB connectors on the tablet PC
8–2
Hardware Guide
331734-001.book Page 3 Monday, July 14, 2003 3:47 PM
External Device Connections
Tablet PC Keyboard
A tablet PC keyboard, which includes a numeric keypad, can be
used with the tablet PC.
For information about using the tablet PC keyboard pointing
device, keypad, and F11/F12 key, see the “Pen, Command Controls
and Keyboards” chapter, “Tablet PC Keyboard” section.
The tablet PC can be attached or detached from the keyboard
while it is on, off, in Standby, or in Hibernation.
Attaching the Tablet PC to the Keyboard
To attach the tablet PC to the keyboard:
1. Place the keyboard on a flat surface with the keyboard keys
facing you.
2. Rotate the attachment features on the rotation disk toward the
keyboard.
Rotating the attachment features toward the keyboard
Hardware Guide
8–3
331734-001.book Page 4 Monday, July 14, 2003 3:47 PM
External Device Connections
3. Position the tablet PC horizontally above the keyboard, with
the front of the tablet PC facing the keyboard.
Positioning the tablet PC above the keyboard
4. Align the 4 slots on the tablet PC with the keyboard
connector, alignment key, and 2 keyboard hooks on the
keyboard 1, then press the tablet PC downward until it
snaps into place 2.
Attaching the tablet PC to the keyboard
8–4
Hardware Guide
331734-001.book Page 5 Monday, July 14, 2003 3:47 PM
External Device Connections
Adjusting the Tablet PC and Keyboard
To tilt the tablet PC screen to a comfortable viewing angle, push
gently on the top of the tablet PC.
Tilting the tablet PC on the keyboard
Hardware Guide
8–5
331734-001.book Page 6 Monday, July 14, 2003 3:47 PM
External Device Connections
Closing the Tablet PC and Keyboard
To close the tablet PC and keyboard as you would close the
display on a standard notebook:
1. Rotate the tablet PC clockwise until it snaps into place facing
away from the keyboard.
Rotating the tablet PC toward the back of the keyboard
2. Tilt the tablet PC downward onto the keyboard.
Closing the tablet PC and keyboard
8–6
Hardware Guide
331734-001.book Page 7 Monday, July 14, 2003 3:47 PM
External Device Connections
Transporting the Tablet PC and Keyboard
If you are transporting the tablet PC and keyboard while they are
not attached, be sure the rotation disk is in the default position.
(The attachment features are at the rear of the tablet PC and the
HP logo is right side up when you are facing the keyboard.)
If you are transporting the tablet PC and keyboard while they are
attached, you may want to use the keyboard latch. The keyboard
latch locks the tablet PC to the keyboard while the tablet PC and
keyboard are closed.
■
To lock the tablet PC to the keyboard while the tablet PC is
closed, slide the keyboard latch to the right 1.
■
To release the tablet PC from the closed position, push the
keyboard latch to the left, then slide and hold the latch toward
the left as you open the tablet PC 2.
Using the keyboard latch
Hardware Guide
8–7
331734-001.book Page 8 Monday, July 14, 2003 3:47 PM
External Device Connections
Detaching the Tablet PC from the Keyboard
To detach the tablet PC from the keyboard:
1. If the tablet PC is closed, open the tablet PC, then rotate the
tablet PC so the screen is facing the keyboard in the notebook
position.
If the tablet PC does not open easily from the keyboard, it
may be secured to the keyboard with the keyboard latch. For
release instructions, see the “Transporting the Tablet PC and
Keyboard” section, earlier in this chapter.
Opening the tablet PC to the notebook position
8–8
Hardware Guide
331734-001.book Page 9 Monday, July 14, 2003 3:47 PM
External Device Connections
2. Rotate the tablet PC and keyboard so the back of the
tablet PC and the keyboard are facing you.
Positioning the tablet PC and keyboard to detach the tablet PC
3. To detach the keyboard, slide and hold the attachment release
switch 1 on the tablet PC as you lift the tablet PC away from
the keyboard 2.
Detaching the tablet PC from the tablet PC keyboard
Hardware Guide
8–9
331734-001.book Page 10 Monday, July 14, 2003 3:47 PM
External Device Connections
Cable Lock
Loop the cable around a secure object, then insert the cable
lock key 1 into the security cable lock 2. Then insert the
cable lock into the security cable slot 3 on the tablet PC.
Connecting an optional cable lock
purpose of security solutions is to act as a deterrent. These
✎ The
solutions do not prevent the product from being mishandled or
stolen.
8–10
Hardware Guide
331734-001.book Page 1 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
Obtaining Upgrades
To order or learn more about optional hardware upgrades and
accessories, visit the HP Web site at http://www.hp.com. The
hardware upgrade area is English only. Or, refer to the Worldwide
Telephone Numbers booklet, included in English only with the
tablet PC, to contact an HP-authorized dealer, reseller, or service
provider.
For information about obtaining and installing software updates
and upgrades, refer on this CD to the Software Guide.
Using a PC Card
A PC Card is a credit card–sized accessory designed to conform
to the standard specifications of the Personal Computer Memory
Card International Association (PCMCIA). The tablet PC
supports both 32-bit CardBus and 16-bit PC Cards.
A PC Card can be used to add modem, sound card, memory,
storage, wireless communication, or digital camera functions to
the tablet PC. A PC Smart Card Reader or a biometric
identification PC Card can add security.
purpose of security solutions is to act as a deterrent. These
✎ The
solutions do not prevent the product from being mishandled or
stolen.
Hardware Guide
9–1
331734-001.book Page 2 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
Selecting a PC Card
A Type I or Type II PC Card can be used. A Type III PC Card will
not fit into the PC Card slot of the tablet PC. (Types I, II, and III
PC Cards vary by thickness, with Type III being the thickest.)
Zoomed video cards are not supported.
Configuring a PC Card
Ä
9–2
CAUTION: If you install all of the software or any of the enablers
provided by a PC Card manufacturer, you may not be able to use other
PC Cards. If you are instructed by the documentation included with
a PC Card to install device drivers:
■ Install only the device drivers for the Microsoft Windows XP
Tablet PC Edition operating system.
■ Do not install other software, such as card services, socket services,
or enablers, that may also be supplied by the PC Card
manufacturer.
Hardware Guide
331734-001.book Page 3 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
Inserting a PC Card
Ä
CAUTION: To prevent damage to the PC Card connectors, use minimal
force when inserting a PC Card into the PC Card slot.
1. Hold the PC Card label-side up with the connector facing
the tablet PC.
2. Gently push the card into the PC Card slot until the card
is seated.
Inserting a PC Card
Stopping and Removing a PC Card
Ä
CAUTION: To prevent loss of work or an unresponsive system, stop a
PC Card before removing it.
inserted PC Card uses power even when it is not in use. To
✎ An
conserve power, stop a PC Card when you are not using it.
1. Close all applications and complete all activities that are
supported by the PC Card.
2. To stop a PC Card, select the system tray icon for Safely
Remove Hardware, then follow the instructions on the screen.
(To display the Safely Remove Hardware icon, select the
system tray icon for Show Hidden Icons.)
Hardware Guide
9–3
331734-001.book Page 4 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
3. To release the PC Card, press the PC Card eject button 1.
4. Gently pull out the PC Card 2.
Removing a PC Card
Using an SD Card
An SD Card is smaller than a PC Card, but can add similar
functions to the tablet PC system. Most commonly, an SD Card is
used to add backup, storage, wireless network, fax/modem, or
cellular telephone functions.
When using an SD Card, HP recommends that you connect the
system to external power whenever possible. Some SD Cards use
large amounts of power and can quickly drain a battery pack.
Ä■
CAUTION: To prevent loss of work or damage to an SD Card:
■
9–4
Do not save your work to an SD Card unless the tablet PC is
connected to external power or you are certain that the battery
pack has enough charge remaining to complete the operation.
Do not shut down the tablet PC or remove the SD Card until all
activities supported by the card are complete.
Hardware Guide
331734-001.book Page 5 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
Configuring an SD Card
If an SD Card manufacturer instructs you to install card-specific
drivers, be sure to install only the drivers supported by the
Windows XP Tablet PC Edition operating system. If you are
unsure of driver compatibility, contact the SD Card manufacturer.
Inserting an SD Card
Ä
CAUTION: To prevent damage to the SD Card connectors, use minimal
force when inserting an SD Card into the SD Card slot.
1. Hold the SD Card label-side up with the connector facing
the tablet PC.
2. Gently push the card into the SD Card slot until the card is
seated.
Inserting an SD Card
Hardware Guide
9–5
331734-001.book Page 6 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
Stopping and Removing an SD Card
Ä
CAUTION: To prevent loss of work or an unresponsive system, stop an
SD Card before removing it.
inserted SD Card uses power even when it is not in use. To
✎ An
conserve power, stop an SD Card when you are not using it.
1. Close all applications and complete all activities that are
supported by the SD Card.
2. To stop an SD Card, select the system tray icon for Safely
Remove Hardware, then follow the instructions on the screen.
(To display the Safely Remove Hardware icon, select the
system tray icon for Show Hidden Icons.)
3. To release the SD Card, press inward on the SD Card 1.
4. Gently pull out the SD Card 2.
Removing an SD Card
9–6
Hardware Guide
331734-001.book Page 7 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
Increasing Memory
You can increase the amount of RAM (random access memory)
in the tablet PC with an optional PC Card or with an optional
memory module.
The tablet PC has one user-accessible memory slot. The slot
supports a PC133-compliant 128-megabyte, 256-megabyte, or
512-megabyte memory module.
Displaying Memory Information
When the amount of RAM in the system increases, the operating
system increases the hard drive space reserved for the
hibernation file.
If you experience problems with Hibernation after increasing
RAM, verify that your hard drive has enough free space for the
larger hibernation file.
■
To display the amount of RAM in the system:
Select Start > Control Panel > Performance and
Maintenance icon > System icon > General tab.
■
To display both the amount of free space on your hard drive
and the amount of space required by the hibernation file:
Select Start > Control Panel > Performance and
Maintenance icon > Power Options icon > Hibernate tab.
Hardware Guide
9–7
331734-001.book Page 8 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
Removing or Inserting a Memory Module
Å
WARNING: To prevent exposure to electric shock, work only in the
memory and mini PCI compartment during this procedure. The hard
drive bay and the memory and mini PCI compartment are the only
user-accessible internal compartments on the tablet PC. All other areas
that require a tool to access should be opened only by an HP-authorized
service provider.
Å
WARNING: To prevent exposure to electric shock and damage to the
tablet PC, shut down the tablet PC, unplug the power cord, and remove
the battery pack before installing a memory module.
Ä
CAUTION: To prevent electrostatic discharge from damaging electronic
components: Discharge static electricity from yourself by touching a
grounded metal object before beginning this procedure. For more
information about preventing electrostatic damage, refer on this CD to
the Regulatory and Safety Notices guide.
1. Be sure that you have followed the instructions in the
preceding warnings and caution.
If you are not sure whether the tablet PC is off or in
Hibernation, slide and release the power switch. If your
work returns to the screen, save your work, exit all
applications, then shut down the tablet PC.
2. Disconnect all external devices connected to the tablet PC.
3. Disconnect the power cord.
4. Remove the battery pack.
5. If the tablet PC keyboard is attached to the tablet PC, detach
the keyboard.
9–8
Hardware Guide
331734-001.book Page 9 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
6. Turn the tablet PC front side down.
7. Remove the two memory and mini PCI compartment
retaining screws 1.
8. Slide, lift, then remove the memory and mini PCI
compartment cover 2.
Opening the memory compartment
Hardware Guide
9–9
331734-001.book Page 10 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
9. Remove or insert the memory module.
To remove a memory module:
a. Release the retention clips on each side of the memory
module 1. (The memory module tilts upward.)
b. Grasp the edges of the memory module, then gently pull
it out of the memory slot 2.
c. To protect a removed memory module, place it in an
electrostatic-safe container.
Removing a memory module
9–10
Hardware Guide
331734-001.book Page 11 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
To insert a memory module:
a. Align the keyed (notched) edge of the memory module
with the keyed area in the memory slot 1.
b. Press the memory module into the slot from a 45-degree
angle until it is seated 2.
c. Push the memory module downward until the retention
clips snap into place 3.
Inserting a memory module
Hardware Guide
9–11
331734-001.book Page 12 Monday, July 14, 2003 3:47 PM
Additional Hardware Options
10. Align the tabs on the memory compartment cover with the
cover slots on the tablet PC 1, then press downward on
the cover until it is seated.
11. Reinsert the two retaining screws that secure the memory and
mini PCI compartment cover to the tablet PC 2.
Replacing the memory compartment cover
9–12
Hardware Guide
331734-001.book Page 1 Monday, July 14, 2003 3:47 PM
10
Maintenance, Shipping and
Travel
Maintaining Software
HP recommends that you:
■
Install all software updates as they become available. For
instructions, refer on this CD to the Software Guide,
“Software Updates and Restorations” chapter.
■
Install and use virus protection software. Antivirus software
can be purchased from most computer or electronics retailers.
■
Back up your work and system software frequently.
❏
For information about using the operating system backup
utility, select Start > Help and Support > Performance
and Maintenance topic. In the upper left pane of
the Performance and Maintenance window, select the
Backing Up Your Data check box.
❏
For information about selecting optional backup software
or hardware, consult with your authorized HP dealer,
reseller, or service provider.
Hardware Guide
10–1
331734-001.book Page 2 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Protecting Hardware
To protect and prolong the performance of your hardware,
observe the following cautions.
Ä■
CAUTION: To prevent damage to your hardware or loss of work:
Carry and store the tablet PC in the portfolio or an optional
Executive Portfolio.
■ Do not place anything on top of the tablet PC, even when it is in a
portfolio.
■ Use the tablet PC only on solid surfaces and in open areas. Do not
allow a hard surface, such as an adjoining optional printer, or a
soft surface, such as carpet, clothing, or bedding, to block the vent.
■ Protect the tablet PC from liquids and excessive moisture.
■ Do not expose the tablet PC to direct sunlight, extreme
temperatures, or ultraviolet light for extended periods of time.
■ Keep all hard drives and diskettes away from magnetic fields.
Magnetic fields can corrupt data stored on hard drives and
diskettes.
■ If the tablet PC will be unused for one week or more, shut it down.
■ If the tablet PC will be disconnected from external power for more
than one month, shut down the tablet PC and remove the battery
pack. For information about storing the battery pack, see
Chapter 3,“Battery Packs.”
10–2
Hardware Guide
331734-001.book Page 3 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Using Portfolios
To protect the tablet PC screen, HP recommends that you use or
transport the tablet PC with a portfolio attached. A slim portfolio
that protects the tablet PC or the tablet PC attached to an optional
keyboard is included with the tablet PC.
An optional leather Executive Portfolio that provides additional
protection, has slots for business cards, and accommodates
additional items is available in most regions.
To obtain the Executive Slimline or Workstation Portfolio, refer
to the Worldwide Telephone Numbers booklet included in English
only with the tablet PC to contact your authorized HP dealer,
reseller, or service provider.
Attaching a Portfolio
When you are using only the tablet PC, press the 2 tabs on the
portfolio into the 2 universal attachment slots on the tablet PC.
Identifying the universal attachment slots on the tablet PC
Hardware Guide
10–3
331734-001.book Page 4 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
When you are using the tablet PC attached to the tablet PC
keyboard, press the 2 tabs on the portfolio into the 2 universal
attachment slots on the keyboard.
Identifying the universal attachment slots on a tablet PC keyboard
10–4
Hardware Guide
331734-001.book Page 5 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Detaching a Portfolio
To release a portfolio from the tablet PC, slide an hold the
attachment release switch on the tablet PC.
Sliding the attachment release switch on the tablet PC
To release a portfolio from the tablet PC keyboard, slide and hold
the attachment release switch on the tablet PC keyboard.
Sliding the attachment release switch on the tablet PC keyboard
Hardware Guide
10–5
331734-001.book Page 6 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Cleaning Hardware
Å
WARNING: To prevent electric shock or damage to components,
do not attempt to clean the tablet PC until you:
■ Shut down the tablet PC.
■ Disconnect the tablet PC from external power.
■ Disconnect all powered external devices from the tablet PC.
Ä
CAUTION: Do not spray liquids on the tablet PC. Household solvents
can permanently damage tablet PC surfaces, and any liquid can
damage the internal components of the tablet PC or an optional
keyboard.
Cleaning the Screen
To remove smudges and lint, clean the screen with a soft, lint-free
cloth dampened with water or a glass cleaning liquid. Antistatic
screen cleaner or premoistened antistatic wipes may also be used.
10–6
Hardware Guide
331734-001.book Page 7 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Cleaning a Tablet PC Keyboard
Dust, lint, and other debris can affect the performance of
an optional tablet PC keyboard. To prevent sticking or
nonfunctioning keys, clean the keyboard frequently using a
can of compressed air with a straw extension. Blow the
compressed air around the base of each key.
To clean the key surfaces, use a soft, damp, lint-free cloth.
a household vacuum cleaner to clean the keyboard may
✎ Using
deposit, rather than remove, debris.
Cleaning a tablet PC keyboard with a can of compressed air
Hardware Guide
10–7
331734-001.book Page 8 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Replacing Hardware
Replacing the System Hard Drive
The system hard drive is the hard drive in the hard drive bay.
Remove the system hard drive only for repair or replacement.
Ä■
CAUTION: To prevent an unresponsive system and loss of work:
Shut down the tablet PC before removing the system hard drive.
Do not remove the system hard drive while the tablet PC is powered
on, in Standby, or in Hibernation.
■ To verify that the tablet PC is off and not in Hibernation, slide and
release the power switch. If your work returns to the screen, save
your work, exit all applications, then shut down the tablet PC.
10–8
Hardware Guide
331734-001.book Page 9 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
1. Save your work, then shut down the tablet PC.
2. Turn the tablet PC front side down.
3. Remove the 2 hard drive bay cover retaining screws 1.
4. Slide, lift, then remove the hard drive bay cover 2.
Removing the hard drive bay cover
Ä
CAUTION: The connector pins on the hard drive are designed to
support only the minimal insertions or removals that may be required for
repair or replacement. To prevent damage to the hard drive connectors,
be careful not to bend them while removing the hard drive.
Hardware Guide
10–9
331734-001.book Page 10 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
5. To remove the hard drive, gently disengage the drive
connectors 1 by sliding the hard drive toward the lower
edge of the tablet PC.
6. Remove the drive from the bay 2.
Removing a system hard drive from the hard drive bay
10–10
Hardware Guide
331734-001.book Page 11 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
7. To insert the replacement hard drive, lower the drive into the
hard drive bay 1, then slide the connectors on the hard drive
toward the connectors in the bay 2 until the connectors
engage and the drive is seated.
Inserting a system hard drive into the hard drive bay
Hardware Guide
10–11
331734-001.book Page 12 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
8. Align the tabs on the hard drive bay cover with the cover
slots on the tablet PC 1, then press downward on the
cover until it is seated.
9. Reinsert the 2 retaining screws that secure the cover to the
tablet PC 2.
Replacing the hard drive bay cover
10–12
Hardware Guide
331734-001.book Page 13 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Replacing a Pointing Stick Cap
Two pointing stick replacement caps are included with an
optional tablet PC keyboard. To replace a worn pointing
stick cap:
1. If the keyboard is attached to the tablet PC, shut down the
tablet PC.
2. Gently pull off the used pointing stick cap.
3. Push a replacement cap into place.
Replacing the pointing stick cap
Hardware Guide
10–13
331734-001.book Page 14 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Preparing the Tablet PC for
Shipping or Travel
1. Back up your work.
2. Remove a PC Card or SD Card.
3. Undock the tablet PC from an optional Docking Station.
4. Turn off, then disconnect all optional external devices such as
headphones or an External MultiBay. (It is not necessary to
detach the tablet PC from the tablet PC keyboard.)
5. Shut down the tablet PC.
6. If the tablet PC will be disconnected from an external power
source for more than one month, shut down the tablet PC,
remove the battery pack, and store the battery pack in a cool,
dry place.
7. If you are shipping the tablet PC, insert it into a portfolio,
place it in the original packing box or similar protective
packaging, and label the package “FRAGILE.”
10–14
Hardware Guide
331734-001.book Page 15 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
Traveling with the Tablet PC
Checklist for Travelers
■
Take along a backup of your work. Do not pack the backup
with the tablet PC.
■
Carry the tablet PC with you. Do not check it with
your luggage.
■
If you will have access to an optical drive, you may want to
take along the Documentation Library CD. If not, HP
suggests that you print and take with you the “Contacting
HP” section later in this chapter.
■
Do not expose the tablet PC, a hard drive, or a diskette to a
magnetic security detector.
❏
The security device that examines carry-on items placed
on a conveyer belt uses x-rays and is safe for the
tablet PC and all drive media.
❏
The walk-through security device and handheld
security wands are magnetic and may damage the
tablet PC, a hard drive, or a diskette.
■
If you plan to use the tablet PC during a flight, check with the
airline in advance. In-flight tablet PC use is at the discretion
of the airline.
■
If you expect to encounter climatic extremes, see the
“Specifications” chapter, “Tablet PC Operating
Environment” section.
Hardware Guide
10–15
331734-001.book Page 16 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
■
Å
If you are traveling internationally:
❏
If you plan to use an internal modem, review Chapter 6,
“Internal Modem” for information about using adapters
and country configurations. You may want to print and
take with you the “Solving Travel Connection Problems”
section of that chapter if you are not bringing the
Documentation Library CD.
❏
Check the computer-related customs regulations for each
country on your itinerary.
❏
Consult with an electronics retailer or an HP authorized
dealer, reseller, or service provider about power cord and
adapter requirements for each location in which you plan
to use the tablet PC. (Voltage, frequency, and plug
configurations vary.) To contact an HP-authorized dealer,
reseller, or service provider near you, refer to the
Worldwide Telephone Numbers booklet included in
English only with the tablet PC.
WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not attempt to run the tablet PC with a voltage converter
kit sold for appliances.
Contacting HP
Getting Help from the Internet
If you have Internet access, you can resolve most problems that
may arise while traveling with the tablet PC by using HP Help
and Support.
HP Help and Support provides links to specific areas of the HP
Web site (http://www.hp.com) where you can:
10–16
■
Obtain all documentation included with your tablet PC as
well as other information about your tablet PC such as
specifications, white papers, and customer advisories.
■
Initiate an online service event with an HP support specialist.
Hardware Guide
331734-001.book Page 17 Monday, July 14, 2003 3:47 PM
Maintenance, Shipping and Travel
■
Download the latest drivers, utilities, and other software
updates for your tablet PC.
■
Subscribe to the HP Support Software CD.
To access these links and descriptions of the options they provide,
select Start > HP Help and Support. The HP Help and Support
menu is displayed in the left panel.
Not all links are available worldwide, and most sites are available
in limited languages.
Getting Help Without Using the Internet
If you need help and cannot access the Internet:
■
■
To obtain troubleshooting information:
❏
Refer on this CD to the Troubleshooting guide.
❏
Refer to the “Solving Problems” chapter in the printed
Startup Guide included with the tablet PC.
To obtain a list of worldwide Technical Support telephone
numbers:
❏
Select Start > Control Panel > Performance and
Maintenance icon > System icon. Then, near the lower
edge of the System Properties window, select the Support
Information button.
Refer to the printed Worldwide Telephone Numbers booklet
included in English only with the tablet PC.
Hardware Guide
10–17
331734-001.book Page 1 Monday, July 14, 2003 3:47 PM
11
Specifications
The information in this chapter may be helpful if you plan to
use or transport the tablet PC internationally or in extreme
environments.
Tablet PC and Tablet PC Keyboard
Dimensions
Dimension
Metric
U.S.
Height
2.1 cm
0.8 in
Width
21.0 cm
8.3 in
Depth
27.1 cm
10.8 in
Hardware Guide
11–1
331734-001.book Page 2 Monday, July 14, 2003 3:47 PM
Specifications
Tablet PC Operating Environment
Factor
Metric
U.S.
Operating
10° to 35° C
50° to 95° F
Nonoperating
-10° to 60° C
14° to 140° F
Temperature
Relative humidity (noncondensing)
Operating
10 to 90%
10 to 90%
Nonoperating
5 to 90%
5 to 90%
Maximum altitude (unpressurized)
Operating
3,048 m
10,000 ft
Nonoperating
9,144 m
30,000 ft
Tablet PC Rated Input Power
The tablet PC operates on DC power, which can be supplied by an
AC or DC power source.
Input Power
Rating
Operating voltage
100–120/220–240 Vrms
Operating current
1.7/0.85 A RMS
Operating frequency range
50 to 60 Hz AC
When powered by a DC source
18.5 V MAX
✎
11–2
This product is designed for IT power systems in Norway with
phase-to-phase voltage not exceeding 240 Vrms.
Hardware Guide
331734-001.book Page 3 Monday, July 14, 2003 3:47 PM
Specifications
Modem Specifications
This tablet PC has been tested and found to comply with the
limits for a Class B digital device.
Factor
Specification
Temperatures
Operating
10° to 40° C (50° to 104° F)
Nonoperating
-20° to 60° C (-4° to 140° F)
Relative Humidity (noncondensing)
Operating
10 to 90%
Nonoperating
5 to 90%
Interfaces
Communications
connector
Standard RJ-11
connector
Host Connector
mini PCI Type III
Power Requirements
+3.3 volts ±5%, +3.3 vaux ±5%
Finding More Environmental
Information
The specifications in this chapter contain information about
exposing the tablet PC to environmental extremes.
For similar information about storing battery packs, see the
“Battery Packs” chapter, “Storing a Battery Pack” section.
For information about exposing the tablet PC to sunlight,
ultraviolet light, x-rays, or magnetic fields, see the “Maintenance,
Shipping and Travel” chapter, “Protecting Hardware” section.
Hardware Guide
11–3
331734-001.book Page 1 Monday, July 14, 2003 3:47 PM
Index
AC adapter
AC power connector 1–11
connecting 3–15
disconnecting 3–1
identifying 1–22
light 1–2
AC power connector 1–11
AC power, switching to and from
3–1
adapter
for AC power cord. See AC
adapter
for connecting AC adapter to
electrical outlet (Japan only)
1–22
for modem. See modem adapter
adjustment, tilt 1–26
airport security devices 10–15
alignment
key 1–26
key slot 1–9
notches, docking 1–25
slots, battery bay 3–4
slots, docking 1–8
tabs, battery pack 3–4
altitude specifications 11–2
Hardware Guide
analog telephone lines 6–6
antennas 1–7, 1–10
antivirus software 10–1
applications key 1–24
applications. See software
AT commands 6–8
attachment release switch
on tablet PC 1–14, 8–9
on tablet PC keyboard 1–27
audio devices, external
connecting 8–1
jacks for 5–5
audio-out jack 5–5
Auto/Air Cable
AC power connector 1–11
connecting 3–15
tasks supported by 3–9
Automobile Power
Adapter/Charger
AC power connector 1–11
connecting 3–15
tasks supported by 3–8
AutoPlay 4–8
backup software 10–1
battery bay
alignment slots 3–4
Index–1
331734-001.book Page 2 Monday, July 14, 2003 3:47 PM
Index
inserting battery pack into 3–4
Microsoft Certificate of
Authenticity label, inside
1–17
release latch 1–15
removing a battery pack
security screw from 3–6
removing battery pack from
3–2
battery light 1–2
battery pack
button and lights on 3–12
calibrating 3–16
charging 3–8
disposing of 3–21
inserting 3–4
monitoring charge in 3–10
Quick Check feature 3–12
recycling 3–21
release latch 1–15
security screws 3–6
storing 3–1, 3–20
tabs 3–4
battery power
conserving 3–19
low-battery conditions 3–13,
3–14
running tablet PC on 3–1
switching to and from 3–1
battery, bridge 3–14
biometric identification PC Cards
9–1
board
mini PCI 1–16, 7–5
modem 6–1
bridge battery 3–14
Index–2
button(s)
battery quick check 3–12
esc 1–6, 2–12
Journal launch 1–3, 2–9
media eject, on diskette drive
4–7
media release, on optical drive
4–5
PC Card eject 9–4
pen 2–2
pointing stick 2–19
Q menu 1–6, 2–10
reset 2–12
rotate 1–3, 2–9
tab 1–6, 2–11
Tablet PC Input Panel launch
1–3, 2–8
Windows Security 1–5, 2–11
See also jog dial; latch; switch
cable
DC 1–11
modem 1–21, 6–3
modem vs. network 1–21
network 1–21, 7–2
security 8–10
cable lock, security 8–10
calibration
battery pack 3–16
pen 2–4
cap, replacing pointing stick 10–13
caps lock light 1–23
card and socket services, PC Card
9–2
Hardware Guide
331734-001.book Page 3 Monday, July 14, 2003 3:47 PM
Index
CD-ROM, CD-RW drives. See
drives
CDs included with tablet PC 1–19
CDs, CD-RWs. See drive media
circuitry, noise suppression
on modem cable 6–3
on network cable 7–2
command controls
identified 2–6
procedures 2–8
Quick Reference 2–7
commands, AT 6–8
compartment memory 1–16, 9–9
connector(s)
AC power 1–11
connection procedures 8–1
docking 1–14
drive 4–3
external monitor 1–11
External MultiBay 1–11
keyboard 1–9
modem 6–2
network 1–21
telephone 1–21
USB 8–2
See also fasteners for tablet pc
keyboard; jack
conservation, power 3–19
controls, command 2–6
cord, power 1–21
See also cable
country-specific modem adapter
configuring software for use
with 6–5
connecting 6–4
Hardware Guide
included with tablet PC 1–22
when required 6–2
critical low-battery condition
identifying 3–13
restoring from 3–15
ctrl+alt+delete command 2–11
DC cable 1–11
device drivers
for external devices 8–1
modem 6–1
network 7–1
PC Card 9–2
SD (Secure Digital) 9–5
updating 10–17
USB 8–2
dial, jog
described 2–13
identified 2–6
dialing modes (pulse vs. tone) 6–6
digital telephone lines 6–6
dimensions, tablet PC 11–1
disc drive, diskette drive. See
drives
disc, diskette. See drive media
disk, rotation 1–25
display device images, managing
8–1
docking
alignment notches 1–25
alignment slots 1–8
connector 1–14
connector pass-through 1–27
restraint latch recess 1–14
Index–3
331734-001.book Page 4 Monday, July 14, 2003 3:47 PM
Index
Docking Station
audio-out jack on 5–3
docking alignment notches
1–25
docking alignment slots 1–8
docking connector 1–14
drives supported by 4–1
drive media
affected by airport security 4–3
affected by Standby and
Hibernation 4–8
caring for 4–9
displaying contents of 4–8
inserting a CD or DVD 4–4
inserting a diskette 4–7
playing 4–10
removing a CD or DVD (power
available) 4–5
removing a CD or DVD (power
unavailable) 4–6
removing a diskette 4–7
types and terms 4–2
drivers. See device drivers
drives
adding to system 4–1
affected by airport security 4–3
caring for 4–3
shipping 4–3
supported 4–1
types and terms 4–2
USB 8–2
See also hard drive, system
DVD, DVD/CD-RW drive. See
drives
DVDs, CD-RWs. See drive media
Index–4
eject button
diskette drive 4–7
optical drive 4–5
PC Card 9–4
electrostatic discharge (ESD) 9–8
enablers, PC Card 9–2
enter command 2–13
environmental specifications 11–1
esc button
identified 1–6
procedures 2–12
ESD (electrostatic discharge) 9–8
external devices
connecting, disconnecting 8–1
USB 8–2
See also connector(s); fasteners
for tablet PC keyboard; jack;
specific types of devices
external monitor connector 1–11
External MultiBay
connectors for 1–11
drives supported 4–1
External MultiBay connector 1–11
F11/F12 key
procedures 2–23
responding to Network Service
Boot prompt with 7–5
fasteners for tablet PC keyboard
8–4
FDD (floppy disk drive). See
drives
feet, tilt and stationary 1–18
Hardware Guide
331734-001.book Page 5 Monday, July 14, 2003 3:47 PM
Index
Fn, specific functions of
on on-screen keyboard 2–17
on tablet PC keyboard 2–21,
2–23
freeze, system 2–11
function keys (F1, F2, etc.)
accessing F12 on tablet PC
keyboard 2–23
accessing, on on-screen
keyboard 2–17
standard functions of 1–24
hard drive bay
cover 10–8
cover retaining screws 10–8
replacing system hard drive in
10–8
hard drive, system
defined 4–2
displaying amount of free space
on 9–7
replacing 10–8
retaining screw 10–9
space on, required for
Hibernation file 9–7
See also drives
HDD (hard disk drive). See hard
drive, system
headphones
audio-out jack 5–5
connecting 5–6, 8–1
headset
connecting 5–6, 8–1
headset jack 5–5
Hardware Guide
Hibernation
avoiding while playing media
4–8
identifying 10–8
initiated during critical
low-battery condition 3–13
initiating 3–15
resuming from 3–15
holder, pen 2–5
hooks, keyboard 1–26, 8–4
HP Support Software CD 10–17
hub, USB 8–2
humidity specifications 11–2
identifying pen components 1–1
identifying tablet PC components
additional 1–19
back 1–14
front 1–2
left side 1–9, 1–10
lower side 1–8
right side 1–4
top 1–10, 1–11
identifying tablet PC keyboard
components
additional 1–28
back 1–27
front 1–23
internal wireless activity light 1–2
internal wireless LAN
antennas 1–7, 1–10
documentation 7–5
optimizing transmissions 1–7
Index–5
331734-001.book Page 6 Monday, July 14, 2003 3:47 PM
Index
connector 1–26
detaching 8–7, 8–8
F11/F12 key 2–23
hooks 1–26
latch 8–7
locking to tablet PC 8–7
numeric keypad 2–20
obtaining 2–18
opening 8–5, 8–7
pointing device 2–19
releasing 8–7, 8–8
replacing pointing stick cap
10–13
rotating 8–5
securing 8–6
setting pointing device
preferences 2–20
shipping 10–14
tilting 8–5
unlocking 8–7
jack
audio-out 5–5
connection procedures 8–1
headset 5–5
microphone 5–5
PBX 6–6
RJ-11 telephone 6–2
RJ-45 network 7–2
See also connector(s)
Japan-specific outlet adapter 1–22
jog dial
identified 1–7
procedures 2–13
Journal application 2–9
Journal launch button
identified 1–3
procedures 2–9
key(s)
F11/F12 2–23
function (F1, F2, etc.) 1–24
Microsoft logo 1–24
numeric keypad 2–20
Windows application 1–24
keyboard, external USB
connecting 8–2
supported 2–1
keyboard, on-screen 2–17
keyboard, tablet PC
alignment key 1–26
attaching 8–3
cleaning 10–7
closing 8–6
components identified 1–23
Index–6
label
Microsoft Certificate of
Authenticity 1–17
modem approvals 1–17
product identification 1–17
system 1–17
wireless certification 1–17
LAN. See internal wireless LAN;
network
LAN connection lights 7–3
landscape orientation
defined 2–14
rotate button 1–3
Hardware Guide
331734-001.book Page 7 Monday, July 14, 2003 3:47 PM
Index
Landscape View, Primary and
Secondary 2–14
latch
battery pack release 1–15, 3–3
docking restraint, recess 1–14
keyboard 8–7
See also button(s); switch
light(s)
AC adapter 1–2
battery 1–2
battery quick check 3–12
caps lock 1–23
LAN connection 7–3
power/standby 1–4
wireless LAN activity 1–2
local area network. See internal
wireless LAN; network
lock, security cable 8–10
lockup, system 1–4
low-battery conditions
identifying 3–13
resolving 3–15
magnetic fields, affecting
hardware 10–15
media eject button 4–7
media, drive
avoiding Standby and
Hibernation while using 4–8
caring for 4–9
displaying contents of 4–8
software 4–10
types and terms 4–2
memory
displaying amount of 9–7
Hardware Guide
module, inserting or removing
9–8
modules supported 9–7
slots available 9–7
microphone, external
connecting 5–7, 8–1
microphone jack 5–5
microphone, internal 5–4
Microsoft logo key 1–24
modem adapter
configuring software for use
with 6–5
connecting 6–4
included 1–22
when required 6–2
modem cable
connecting 6–2
included 1–21
noise suppression circuitry on
6–3
RJ-11 telephone jack 1–11
vs. network cable 1–21
modem commands 6–8
modem, internal
board 6–1
setting country preferences for
6–5
specifications 6–1, 11–3
travel connection
troubleshooting 6–6
using while connected to a
network 7–1
modes, dialing (pulse vs. tone) 6–6
module, memory 9–7
monitor, external
connecting 8–1
Index–7
331734-001.book Page 8 Monday, July 14, 2003 3:47 PM
Index
displaying image on 8–1
external monitor connector
1–11
mouse, external
setting preferences for 2–1
supported 2–1
USB connectors 8–2
network
accessing at startup 7–4
connection specifications 7–1
hardware and software included
7–1
LAN lights 7–3
Service Boot prompt 7–5
turning connection on and off
7–3
using internal modem while
connected to 7–1
network cable
connecting 7–2
included 1–21
noise suppression circuitry on
7–2
RJ-45 network jack 1–11
vs. modem cable 1–21
No Dial Tone error message 6–7
noise suppression circuitry
on modem cable 6–3
on network cable 7–2
number
keys, on keypad 2–20
keys, on on-screen keyboard
2–17
Index–8
Product Key 1–17
serial 1–17
numeric keypad 2–20
operating environment
specfications 11–2
operating system Product Key
number 1–17
optical disc. See drive media
optical drive. See drives
Outlook 2–9
PBX jack 6–2, 6–6
PC Card
eject button 9–4
enablers and card and socket
services 9–2
functions 9–1
inserting 9–3
microdrive 4–1
removing 9–4
stopping 9–3
pen
attaching 2–5
button 2–2
calibration 2–4
components 1–1
entering information with 2–2
Help and tutorials 2–1
Journal application 2–1, 2–7
pen-activated buttons 2–6
setting preferences for 2–5,
2–20
Hardware Guide
331734-001.book Page 9 Monday, July 14, 2003 3:47 PM
Index
peripherals
connecting, disconnecting 8–1
USB 8–2
See also connector(s); fasteners
for tablet PC keyboard; jack;
specific types of devices
pointing device(s)
command controls 2–6
on tablet PC keyboard 2–18
pen 2–1
setting preferences for 2–5,
2–20
using in Setup utility 7–4
pointing stick cap
replacing 10–13
spares included 1–28
portfolio(s)
attaching 10–3
detaching 10–5
Executive 10–3
included with tablet PC 10–3
when to use 10–3
portrait orientation
defined 2–14
rotate button 1–3
Portrait View, Primary and
Secondary 2–14
power
connector, AC 1–11
conservation 3–19
cord 1–21
rated input 11–2
switch 1–4
switching between external and
battery 3–1
See also battery power
Hardware Guide
Power Meter 3–10
power/standby light 1–4
Product Key number 1–17
projector
connecting 8–1
displaying image on 8–1
external monitor connector
1–11
pulse dialing mode 6–6
PXE (Preboot eXecution
Environment) server 7–4
Q Menu
Brightness tab 3–19
described 2–10
Internal and External item 8–1
Internal Only item 8–1
menu 1–6
volume controls 5–2
Q menu button
identified 1–6
procedures 2–10
Quick Check feature, battery 3–12
RAM (random access memory)
9–7
recycling a battery pack 3–21
regulatory information
Class B designation (FCC)
11–3
release latch, battery pack 3–3
release switch, attachment
on tablet PC 1–14, 8–9
on tablet PC keyboard 1–27
reset (emergency shut down) 2–11
Index–9
331734-001.book Page 10 Monday, July 14, 2003 3:47 PM
Index
RJ-11 telephone jack
connecting 6–2
modem cable 1–21
RJ-45 network jack
connecting 7–2
network cable 1–21
rotate button
identified 1–3
procedures 2–9
setting preferences for 2–14
rotation disk 1–25
RPL (Remote Program Load)
server 7–4
screen protector
included with Docking Station
1–9
slots, on tablet PC 1–9
slots, on tablet PC keyboard
1–27
universal attachment slots 1–9,
1–27
screen, cleaning 10–6
SD (Secure Digital) Card
drivers 9–5
functions 9–4
power considerations 9–4, 9–6
stopping 9–6
Secure Digital Card, See also SD
(Secure Digital) Card
security
cable lock 8–10
screws, battery pack 3–6
security devices, affecting
hardware 10–15
Index–10
serial number 1–17
servers, network 7–4
Setup utility
accessing 7–4
network settings 7–4
resetting the tablet PC 2–12
shipping the tablet PC 10–14
shutting down the tablet PC 2–11
Sleep. See Standby
slipcase 10–3
slot(s)
alignment key 1–9
battery bay 3–4
docking alignment 1–8
memory 9–7
PC Card 9–3
screen protector, on keyboard
1–27
screen protector, on tablet PC
1–9
SD (Secure Digital) Card 9–5
security cable 8–10
universal attachment, on tablet
PC 1–9
universal attachment, on tablet
PC keyboard 1–27
socket services, PC Card 9–2
Soft Modem AT Command Reference Manual 6–8
software
AT command 6–8
AutoPlay 4–8
backup 10–1
Journal 2–9
modem 3–19, 6–1, 6–8
Outlook 2–9
Hardware Guide
331734-001.book Page 11 Monday, July 14, 2003 3:47 PM
Index
Power Meter 3–10
setting up 2–2
Setup utility 2–12
Tablet PC Input Panel 2–17
Task Manager 2–11
Windows Security window
2–11
speakers, external
audio-out jack 5–5
connecting 5–6, 8–1
speakers, internal 5–3
specifications
modem 6–1, 11–3
network 7–1
tablet PC 11–1
Standby
avoiding while playing media
4–8
initiated during critical
low-battery condition 3–13
initiating 3–15
power/standby light 1–4
resuming from 3–15
stylus.See pen
sunlight, affecting tablet PC 10–2
support, HP customer 10–16
Suspend. See Standby
switch
attachment release, on
keyboard 1–27
attachment release, on tablet PC
1–14
power 1–4
See also button(s); latch
system hard drive. See hard drive,
system
Hardware Guide
system lockup 2–11
tab button
identified 1–6
procedures 2–11
responding to Network Service
Boot prompt with 7–5
Tablet PC Input Panel application
2–17
Tablet PC Input Panel launch
button
identified 1–3
procedures 2–8
tablet PC keyboard. See keyboard,
tablet PC
telephone jack (RJ-11)
connecting 6–3
modem cable 1–21
telephone line(s)
analog vs. digital 6–6
connecting modem to 6–2
temperature(s)
operating 11–2
overheating 1–10
storage, for battery packs 3–20
thermal vent 1–10
tilt
adjustment 1–26
feet 1–18
tone dialing mode 6–6
traveling with the tablet PC
Auto/Air Cable 3–15
Automobile Power
Adapter/Charger 3–15
Index–11
331734-001.book Page 12 Monday, July 14, 2003 3:47 PM
Index
battery pack temperature
considerations 3–20
connecting the modem 6–2,
6–5
modem approvals label 1–17
operating environment
specifications 11–2
wireless certification label
1–17
troubleshooting
modem problems, while
traveling 6–6
resources 10–17
turning off the tablet PC 2–11
tutorials
Journal 2–9
Tablet PC Input Panel 2–9
Type I, II, and III PC Cards 9–2
ultraviolet light, affecting tablet
PC 10–2
universal attachment slots
on tablet PC 1–9
on tablet PC keyboard 1–27
USB
connector 1–11
devices, connecting 8–2
External MultiBay connector
1–11
hub 8–2
utilities. See software
Index–12
vent 1–10
virus protection software 10–1
volume controls
adjusting volume with 5–1
conserving power with 3–19
Windows applications key 1–24
Windows Security button
identified 1–5
procedures 2–11
wireless LAN, internal
antennas 1–7, 1–10
documentation 7–5
optimizing transmissions 1–7
wireless LAN activity light 1–2
worldwide telephone numbers, HP
10–17
x-rays, affecting hardware 10–15
zoomed video 9–2
Hardware Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 59
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c7d49ae2-0ff0-4e42-a30a-0e8d6f72d5ed
Modify Date                     : 2003:12:12 13:30:35-06:00
Create Date                     : 2003:12:12 13:30:21-06:00
Metadata Date                   : 2003:12:12 13:30:35-06:00
Document ID                     : uuid:38c7a928-42e0-4d03-bd0e-a2b3848e7419
Format                          : application/pdf
Title                           : Hardware Guide
Creator                         : FrameMaker 7.0
Author                          : Hewlett-Packard Development Company, L.P.
Subject                         : HP Tablet PC Series
Producer                        : Acrobat Distiller 5.0.5 (Windows)

EXIF Metadata provided by EXIF.tools