HON HAI PRECISION IND MICA WiFi 11a/n module User Manual MIC A user manual 1222
HON HAI Precision Ind. Co., Ltd. WiFi 11a/n module MIC A user manual 1222
Contents
- 1. User manual
- 2. User Manual
User manual
MIC-A WIFI Module User Manual Rev. 0.2 Confidential 1. Introduction The MIC-A 802.11a /n module provides wireless modem functionality utilizing OFDM technology. The objective of this use manual is to verify the functionality of the MIC-A 802.11a/n module RF/Digital electronic design against the design specifications. This revision includes results taken at various temperatures (0℃,25℃,65 ℃) and VDD voltages (3.2V,3.3V,5.5V), VDDIO Voltage (2.7V,2.8V,2.9V). Included are statements of test purpose, test methodologies, test modes and parameters, environmental conditions, applicable specifications, and typical reference design performance. The major specifications and documents are listed below and upon to update in the following new revisions. 802.11a: IEEE Std 802.11a 802.11n: IEEE P802.11n/D2.07-Mar 2006 Paragraph 20.3.20.1 This product is for indoor use only (5150 -5250MHz). Confidential 2. Mechanical Drawing Confidential 3. Regulatory Information USA-Federal Communications Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Labeling Hon Hai Precision WiFi 11a/n module MIC-A labeled as below. FCC ID: MCLMICA The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into the system, “Contains FCC ID: MCLMICA” shall be placed on the outside of final host system. Caution: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Canada-Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of this device. The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. Confidential To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Caution: Exposure to Radio Frequency Radiation. To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Confidential
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Mika Create Date : 2010:12:22 13:42:01+09:00 Modify Date : 2010:12:23 15:33:33+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2010:12:23 15:33:33+09:00 Producer : Acrobat Distiller 9.4.0 (Windows) Format : application/pdf Title : Microsoft Word - MIC A user_manual 1222.doc Creator : Mika Document ID : uuid:62c0b8cb-8449-41fe-a7bc-e9fd6faeddb9 Instance ID : uuid:4d0b0649-509d-4640-9bc7-ba561fcfd2bc Page Count : 5EXIF Metadata provided by EXIF.tools