HON HAI PRECISION IND T60H563 Bluetooth and 802.11b Combo Module User Manual UsrMnl BACL Version

Download:
Mirror Download [FCC.gov]
Document ID	257588
Application ID	Euydc4QvwTptMIGuQDo/AA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	92.46kB (1155726 bits)
Date Submitted	2002-07-18 00:00:00
Date Available	2002-12-03 00:00:00
Creation Date	2002-07-11 11:13:29
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-07-11 11:13:29
Document Title	Microsoft Word - UsrMnl BACL Version.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	csr

U S E R’S
M A N U A L
T60H563
MiniPCI WLAN/Bluetooth Combo Module
Ambit Microsystems Corporation
5F-1, 5 Hsin-An Rd., Hsinchu Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C.
TEL: 886-3-5784975, FAX: 886-3-5782924, Internet: http:\\www.ambit.com.tw\
Contents
SECTION ONE:
1.1
INTRODUCTION............................................................................................ 1
FEATURES .............................................................................................................................. 1
WLAN HARDWARE SPECIFICATION ............................................................ 1
1.1.1
1.1.2 BLUETOOTH HARDWARE SPECIFICATIONS.......................................................................... 1
1.1.3 SOFTWARE SPECIFICATION ................................................................................................... 2
1.2
PACKAGE CONTENTS.............................................................................................................. 2
SECTION TWO: BLUETOOTH INSTALLATION .......................................................................... 3
2.1
DRIVER INSTALLATION .......................................................................................................... 3
SECTION THREE:
WIRELESS LAN INSTALLATION ............................................................. 8
3-1 SYSTEM REQUIREMENTS ................................................................................................................ 8
3-2 INSTALLATION AND UNINSTALL PROCESS ...................................................................................... 8
SECTION 4
WIRELESS UTILITY AND CONFIGURATION ............................................... 14
4-1 WINDOWS 98/ME/2000 WIRELESS UTILITY ................................................................................ 14
4-2 WINDOWS XP WIRELESS UTILITY ............................................................................................... 17
APPENDIX A GLOSSARY ............................................................................................................... 24
The information contained in this manual has been verified at the time of this manual printing. The
manufacturer reserves the right to make any changes and improvements in the product described in this
manual at any time and without notice.
All registered trademarks are the property of their respective owners.
Section One:
Introduction
AMBIT MINIPCI 3B WLAN/Bluetooth Combo Module complied with IEEE 802.11b 11Mbps
Standard. The WLAN/Bluetooth application is implemented via a Intersil Prism 2.5 RF
circuit. This RF circuit is developed for Wireless LAN application complied with IEEE
802.11b 11Mbps standard in ISM band. It can be used to provide a variety of low-cost
wireless network interfaces to build your wireless connection via simply SMT procedure to
speed the time to market. Three Intersil’s chips are implemented including ISL3984, ISL3685,
HFA3783. With Bluetooth technology, the Bluetooth part can achieve internet connection
rates up to 721 kbits/s. The Notebook communicate with Bluetooth by MiniPCI Interface
Reserve pin. The WLAN/Bluetooth combo card mechanical complies with MINIPCI 3B from
factor.
1.1 Features
1.1.1
WLAN Hardware Specification
Form Factor & Bus Interface
MiniPCI Type IIIB, compliant to MiniPCI 1.0
Wireless LAN Compliance
IEEE 802.11b
Radio Technology
Direct Sequence Spread Spectrum
Operating Frequency
2.4 ~ 2.4835GHz ISM band
Modulation Schemes
DQPSK, DBPSK and CCK
Channel Numbers
IEEE 802.11b compliant
1 ~ 11 channels for United States
WLAN Data Rate
11Mbps with fall back rates of 5.5, 2, and 1Mbps
Spreading
11-chip Barker Sequence
Media Access Protocol
CSMA/CA with ACK
Transmitter Output Power
Typ. 15 dBm (ERP)
Receiver Sensitivity
Typ. –82 dBm for 11Mbps @ 8% PER
Typ. –85 dBm for 1Mbps @ 8% PER
Antenna Type
Integrated diversity switch with Hirose compliant
connectors(U-FL) for connecting dual diversity
antennas
1.1.2 Bluetooth Hardware Specifications
Bluetooth Module Chip Set
CSR BlueCore 02
Supply Voltage
2.7V to 3.3V
Power Features
Host wake-up on the module
Detach the module from host
Frequency Range
2.400-2.497 GHz
Antenna Load
50 Ohm
Receive Sensitivity
–80 dBm@0.1% BER
Maximum Receiver Signal
-20 dBm
TX Power (ERP)
4 dBm maximum (class 2 and class 3)
RF Power Control Step Size
2 dB
Range
10 meters at 0 dBm TX power (class 2)
Radio
Compliant with Bluetooth standard version 1.1
Pico Net
1 master to 7 slaves
Operating Channels
79 channels of 1 MHz BW
Security
Full support of Bluetooth security provisions
including hardware support for full length 128
bit encryption keys.
Host Interface (USB)
USB specification 1.1 compliant
1.1.3 Software Specification
OS
- Supports Windows 98SE, ME, 2000, XP
Configuration
- User interface for configuration and status
monitoring
WLAN Standard Compliance
- 802.11b,- 802.1X for Windows XP
Bluetooth Standard
- Bluetooth Specification 1.1
Site Survey
- Auto scan to find APs nearby and show
signal strength for each channel (for WLAN
only)
1.2 Package Contents
Make sure you have received the following items in your package:
One Mini-PCI Type IIIB WLAN/Bluetooth Module
One Phone Cable (Bluetooth)
User Manual
Section Two: Bluetooth Installation
The following steps provide instructions for installing Bluetooth.
1. Make sure your MiniPCI WLAN/BT Combo card already insert into the slot.
2. Insert the connector of Antenna cable into the antenna connector of MiniPCI Module .
The antenna connector assembly need to be performed by well trained engineer to cause
antenna connector mismatch then degrade Bluetooth connection performance. Please find your
vendor to help this connector assembly.
2.1 Driver Installation
Your Bluetooth is using the Plug and Play (PnP) capabilities of you computer. PnP is a set of
specifications that define the ability for the computer hardware and operating system to
automatically configure all compliant devices that are installed, relieving the user of the need
to determine which addresses and interrupts to user for each device.
Proceed to the following section.
Install Bluetooth (Windows 98/2K/ME/XP)
1Execute the program ‘Setup.exe’ in the CD. Windows displays the dialog as below. Press
‘Next’ button to continue.
2.Select the “ Device name “ and “Device Type” that you want to Install.
3.Wait for the install program to do the installation.
4. Select “ OK” to avoid Microsoft Digital Signature message
5.Congratulations! Bluetooth has been installed successfully.
Please click ‘Finish’ to go to the next step.
6.Select the Application that you want to use.
6
Uninstall Bluetooth (Windows 98/2K/ME/XP)
One can remove the Bluetooth via the ‘Add/Remove Programs’ in the ‘Control Panel’.
Select ‘Bluetooth’ and click ‘Add/Remove’ button, the dialog as below displays.
2.Wait for the un-installation to do its work.
3.Then Complete the un-Installation.
Section Three: Wireless Lan Installation
3-1 System Requirements
In order to install Wireless LAN and use the Wireless LAN/Bluetooth combo card in your notebook computer.
Your notebook system must meet the following requirements:
A Mini-PCI Type III Slot that already insert in WLAN/BT Combo module
Windows 98SE,2K,ME,XP Support
3-2 Installation and Uninstall Process
Install Wireless LAN (Windows 98/2K/ME/XP)
1.
Execute the program ‘Setup.exe’ in the CD. Windows displays the dialog as below. Press
‘Next’ button to continue.
2.
It displays a License Agreement dialog. Press ‘Next’ to continue.
3.
Select the destination folder that you want to place the files.
4.
Wait for the install program to do the installation.
5.
Congratulations! Wireless LAN has been installed successfully.
Please click ‘Finish’ to go to the next step.
10
6.
Please remove any disks from any drives before your click ‘Finish’.
Then click ‘Finish’ to complete setup.
Uninstall Wireless LAN (Windows 98/2K/ME/XP)
1.
One can remove the AMBIT Wireless LAN via the ‘Add/Remove Programs’ in
the ‘Control Panel’. Select ‘AMBIT Wireless LAN’ and click ‘Add/Remove’
button, the dialog as below displays.
11
2.
Select ‘Remove’ and then click the ‘Next’ button to perform the un-installation.
Click ‘OK’ button if you really want to remove the AMBIT Wireless LAN.
12
3.
Wait for the un-installation to do its work.
4.
Click ‘Finish’ to complete the un-Installation.
13
Section 4
Wireless Utility and Configuration
The following sections describe the Wireless Network Configuration Utility. This
utility provides quick access and friendly interface to configure the card setup.
4-1 Windows 98/ME/2000 Wireless Utility
After installation is completed, a Wireless LAN Utility icon will appear in Desktop
screen. Click it, then you will see the screen below. If you cannot find the icon, you
can select “Start” ->”Program”->”Wireless LAN Configuration Utility” Icon.
Card Status
You can see the AP information that your card connected. In this page you also can
find Firmware Version , MAC Address and Frequency Domain.
ESSID: An acronym for Extended Service Set Identifier, ESSID is the unique name
shared among all clients and Access Points in a wireless network. The ESSID must be
14
identical for all clients or Access Points participating in the same network. The ESSID
is case sensitive and must not exceed 32 characters. Press ‘Rescan’ it will scan the
specific ESSID that your profile set. If your profile set the ESSID to be ANY, then
while you press ‘Rescan’, it will scan AP in the nearby area and choose the stronger
one. From Link Quality and Signal Strength, you can tell the wireless transmission
quality.
Profile
There are two network types:
Ad-Hoc: This mode is used for a simple peer-to-peer network. It offers file sharing
between wireless clients without a wireless Access Point (AP).
Infrastructure: This mode allows a wireless LAN to be integrated into an existing
wired network through an AP. Infrastructure type networks also permit roaming
between Access Points while maintaining connection to all network resources.
Infrastructure mode provides additional features, such as WEP security, power saving
and extended range.
ESSID: You can either choose specific AP or connect to any AP in the nearby area.
15
Power Save: enable it, so it will be triggered when your computer system is inactive.
WEP Key: Wired Equivalent Privacy, WEP is an encryption scheme used to protect
your wireless data communications. WEP uses a combination of 40-bit keys,128-bit
keys to provide data encryption for your wireless network. AP and wireless card
should use the same WEP key in order to communication.
KEY Format: You can choose to enter ASCII Characters (0~9, a~z, A~Z) or
Hexadecimal number (0~9, a~f, A~F)
Default Key: The current KEY you choose.
KEY1~4: If you choose 40-bit keys, then you must enter 5 ASCII Characters or 10
Hexadecimal numbers. If you choose 128-bit keys, then you must enter 13 ASCII
Characters or 26 Hexadecimal numbers.
Site Survey
Use the Site Survey Tool. You can identify each channel transmission quality.
16
4-2 Windows XP Wireless Utility
1. To configure the wireless card setting, you can select Start\Settings\Network Connection in
the Windows XP. Choose the wireless network connection, then you will see below screen.
From this screen, you can see wireless connection status and wireless signal level.
2. Select ‘Properties’ in the above screen. The following windows will show up.
17
In ‘General’ page, Wireless LAN card information and networking protocol have been
displayed. Extra networking protocol can be installed in this page.
18
3. Select Wireless Networks page, you can see available wireless networks in your
nearby area. You can add your preferred wireless Access Point to your list, so your
wireless card will search for specific wireless networks.
Configure
To connect to an existing access point (infrastructure) network, under Available
networks, click the network name, and then click ‘Configure’ to setup wireless security
and data encryption.
Reflesh
To update the list of available networks that are within range of your computer, click
Refresh.
Add
To connect to an access point (infrastructure) network that you know is available but
that does not appear under Available networks, under Preferred networks, click Add.
In Wireless Network Properties, specify the network name (Service Set Identifier).
Remove
To remove a wireless network from the list of preferred networks.
19
Advanced
*If your network are configuring to a computer-to-computer (ad hoc) network, select
‘Computer-to-computer (ad hoc) network only’.
*If you want to connect to a computer-to-computer and access point (infrastructure)
networks are within range of your computer, click ‘Access point
(infrastructure)network only’.
*If you want to connect to a computer-to-computer (ad hoc) network and both
computer-to-computer and access point (infrastructure) networks are within range of
your computer, click ‘Any available network (access point preferred)’.
To automatically connect to available networks that do not appear in the Preferred
networks list, click Advanced, and then select the Automatically connect to nonpreferred networks check box.
20
Define your network name (SSID) in the following windows, so your can join a
specific wireless network. Check AP has WEP on or not. You wireless network will
need to have same WEP setting with AP in order to communicate. If your wireless
network don’t have any AP, check the ‘This is computer-to computer (ad-hoc)
network; wireless access points are not used’
21
This window provides authentication via 802.1X. 802.1X, an IEEE standard that
provides an authentication framework for 802-based LANs. 802.1X takes advantage
of an existing authentication protocol known as the Extensible Authentication
Protocol. 802.1x, giving someone secure, encrypted, wireless access on a Microsoft
network will be as easy as setting a flag on the users domain account.
What does this mean for the Home Network user?
802.1x will ensure that if and when you make the change over to Wireless Ethernet, your
neighbor will not be able to access your wireless LAN!
22
The ‘Advanced’ window offers Firewall and Internet Connection Sharing functions.
Depends on your networking environment, you can select below functions.
23
Appendix A Glossary
Access Point - An internetworking device that seamlessly connects wired and wireless
networks together.
Ad-Hoc - Ad-Hoc is a peer- to-peer wireless network without Access Point. A group
of wireless clients consistent an independent wireless LAN.
Backbone - The core infrastructure of a network, the portion of the network that
transports information from one central location to another central location. The
information is then off-loaded onto a local system.
BSS - Stands for “Basic Service Set.” An Access Point associated with several wireless
stations.
ESS - Stands for “Extended Service Set.” More than one BSS can be configured as an
Extended Service Set. An ESS is basically a roaming domain.
Ethernet - A popular local area data communications network, originally developed
by Xerox Corp., which accepts transmission from computers and terminals. Ethernet
operates on 10/100 Mbps transmission rate over shielded coaxial cable or over
shielded twisted pair telephone wire.
Infrastructure - An integrated wireless and wired LAN is called an Infrastructure
configuration.
MINI-PCI TYPE III - Personal Computer Memory Card International Association,
which develops standards for PC cards, formerly known as MINI-PCI TYPE III cards,
are available in three “types” which are about the same length and width as credit
cards, but range in thickness from 3.3 mm (Type I) to 5.0 mm (Type II) to 10.5 mm
(Type III). These cards can be used for many functions, including memory storage, as
landline Bluetooths and as wireless LAN.
Roaming - A function that allows one to travel with a mobile end system (wireless
LAN mobile station, for example) through the territory of a domain (an ESS, for
example) while continuously connecting to the infrastructure.
Throughput TX RX
Link Quality
Signal Strength
Channel Quality
24

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:07:11 11:13:29-07:00
Modify Date                     : 2002:07:11 11:13:29-07:00
Page Count                      : 26
Creation Date                   : 2002:07:11 18:13:29Z
Mod Date                        : 2002:07:11 18:13:29Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : csr
Metadata Date                   : 2002:07:11 18:13:29Z
Creator                         : csr
Title                           : Microsoft Word - UsrMnl BACL Version.doc

EXIF Metadata provided by EXIF.tools