HON HAI PRECISION IND T77H395 NFC 13.56MHz RFID transceiver module User Manual T77H395 00

Download:
Mirror Download [FCC.gov]
Document ID	1789449
Application ID	+Ossrls2rQo4JI5L8pR97A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.02kB (412746 bits)
Date Submitted	2012-09-12 00:00:00
Date Available	2012-10-31 00:00:00
Creation Date	2012-07-19 15:10:21
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2012-09-11 18:39:04
Document Title	Microsoft Word - T77H395.00 User Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	f1321408

COMPANY CONFIDENTIAL
T77H395 User Manual
Project Name
Rev.
FOXCONN Part No.
Module Rev.
NFC (Near Field Communication) Module
01
T77H395
045
Revision History
Revision
Date
Originator
Comment
0.1
2012/07/18
Wei.Liao
Initial
COMPANY CONFIDENTIAL
Content
REVISION HISTORY .......................................................................................................................................................1
1. INTRODUCTION ..........................................................................................................................................................3
2. NFC STANDARD CONFORMANCE.........................................................................................................................5
3. HARDWARE SPECIFICATION..................................................................................................................................6
4. PRODUCT REQUIREMENTS ....................................................................................................................................7
5. INTERFACE OF CONNECTOR.................................................................................................................................7
COMPANY CONFIDENTIAL
1. Introduction
The T77H395.00 NFC module provides contactless payment, contactless ticketing, service
discovery, exchange information etc. This module is based on Broadcom BCM20792S
solution, which is integrated NFC subsystem, interfaces, and microprocessor and memory
unit.
1.1
Scope
The NFC module supports for the ISO/IEC 18092, ISO/IEC 21481, ISO/IEC 14443
Types A, B and B’, Japanese industrial standard (JIS)(X) 6319-4, and ISO/IEC 15693
standards, etc.
1.2
•
•
Function
NFC Features
- Reader & Writer mode
- Peer-to-Peer Communication mode
- Card emulation mode
BSC (I C-compatible) for host Interface, support all speed mode:
- Low-speed mode (100 kbps)
- Fast mode (400 kbps)
- High-speed mode (3.4Mbps)
•
2-layers PCB printed antenna with 30mmx30mmx0.35mm size and 5 turns design
•
On board XTAL of 26 MHz (+/- 10ppm)
•
Option for on board embedded Secure Element (eSE) with 800kBytes flash
memory
Remark: eSE can be replaced by external SIM memory on platform.
•
Windows 8 Logo Device Requirement compliant
- NFC Forum Wave1 Certification
- LLCP
- SNEP
•
RoHS and Green Compliant
COMPANY CONFIDENTIAL
1.3
Electrical Characteristics
Parameter
Frequency Range
VBAT
VDD I/O
Input Supply
UICC
(class C)
Voltage
UICC (class B)
Communication distance
Peer to Peer Communication Speed
NFC wake up
Operating Temperature
Storage Temperature
Storage Humidity
Minimum
Typical
Maximum
Units
13.56
MHz
2.3
5.5
1.62
3.6
1.78
1.88
1.98
2.9
3.1
3.3
20
mm
424
Kbps
Wake up NFC module from sleep mode by
NFC_WAKE signal via I2C command
70
℃
-20
85
℃
85
COMPANY CONFIDENTIAL
2. NFC standard conformance
Supported smart card (IC Card) types
Read CSN (Card
Serial Number)
NFC Forum Type1 Tag
NFC Forum Type2 Tag
NFC Forum Type3 Tag
NFC Forum Type4 Tag
ISO/IEC 14443 Type A
compliance cards
Mifare Classics 1K,4K
Mifare DESFire
Mifare Ultralight
Mifare Plus
(Mifare) SmartMX
ISO/IEC 14443 Type B
compliance cards
Jyuki (
) cards (*1) issued
by Japanese Government
FeliCa general card
FeliCa Edy card
FeliCa Suica card
FeliCa PKI Option card
HID iCLASS
Other card if any
住基
Typical
operational
distance
40
40
40
20
20
Supported baud
rates
Yes
Yes
Yes
Yes
Yes
Read/Write
application data
area
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
No
TBD
20
106, 212, 424
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Yes
TBD
TBD
TBD
TBD
TBD
Yes
52
Various
106
106
212
106
106, 212, 424
Other industrial standards and specifications
Standard
I2C
PC/SC 2.0
ISO/IEC 18092 (NFCIP-1)
ISO/IEC 15693
ISO/IEC 21481 (NFCIP-2)
Contact-less EMV
PKCS#11
CSP
FIPS 201 PIV-II
Yes / No
Yes
Yes
Yes
Yes
Yes
Yes
Note
(Mandatory)
(Mandatory)
(Mandatory)
(Mandatory)
(Mandatory)
TBD
TBD
TBD
ISO standards at various bit rates
ISO/IEC 14443 A and B, Felica, and NFC Forum Modes
Standard
Reader/Initiator
Data Rate (kbps)
106
212
424
ISO/IEC 14443 A
ISO/IEC 14443 B
ISO/IEC 14443 B - Prime
ISO/IEC 18092/ECMA 340 Active
ISO/IEC 18092/ECMA 340 Passive
JIS(X) 6319-4 FeliCa
Tag/Target
106
212
424
COMPANY CONFIDENTIAL
3. Hardware Specification
3.1
Antenna Electrical Specification
Parameter
Typical
Units
Operating frequency range
13.56
MHz
Communication distance
> 20
mm
3.2
Antenna smith chart and on board antenna drawing.
Network Analyzer used to measure s-parameters of antenna with TDK ferrite and steel
plate.
Frequency swept from 1 to 101 MHz. Impedance at 13.56MHz = 5.16 + j129 ohms.
3.3
Antenna simulation
Reader mode and Tag or Card Emulation frequency response
COMPANY CONFIDENTIAL
4. Product Requirements
4.1 Hardware Requirements
42 mm x30mm module with 10-pin FPC connector
BSC (I C -compatible) interface
4-layer design
Form factor
Host Interface
PCB
4.2 Hardware Architecture
The T77H395.00 NFC module is based on Broadcom BCM20792S solution, which is
integrated NFC subsystem, interfaces, and microprocessor and memory unit. This module
is powered from the host (3.3V) and interfaces to the host with I2C signals and with oneprinted antennas, one on-board 26 MHz XTAL and option for one Secure Element (eSE)
with 800kBytes flash memory.
The functional block diagram is shown as below.
5. Interface of Connector
Pin definition
Pin
Symbol
VBAT
VDDIO
VDD_Ext_SE
10
S1
S2
I2C -SDA
I2C -SCL
GND
IRQ-NFC
UIM_PWR
SWP
NFC_PRESENCE
GND
GND
I/O
Input
Input
Outpu
I/O
Input
Note
Power supply from battery (2.3V - 5.5V)
Power supply to I/O (1.62V – 3.6V)
Power supply to External Secure Element (1.65V 1.95V)
BSC Serial Data Line, active low
BSC Serial Clock
Ground
BSC request, active high
Power supply to UICC
SWP I/O 0 (Single-Wire Protocol interface)
Ground
Ground
Ground
COMPANY CONFIDENTIAL
6. Test tool and SOP
Refer to another document for test sop.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2012:07:19 15:10:21Z
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:09:11 18:39:04+08:00
Metadata Date                   : 2012:09:11 18:39:04+08:00
Format                          : application/pdf
Creator                         : f1321408
Title                           : Microsoft Word - T77H395.00 User Manual.doc
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:fc4ce5cd-6cb3-4a90-a431-4f8b0097e134
Instance ID                     : uuid:95640c6d-140b-4f47-bb57-5508c704215c
Has XFA                         : No
Page Count                      : 8
Author                          : f1321408

EXIF Metadata provided by EXIF.tools