HON HAI PRECISION IND T77H395 NFC 13.56MHz RFID transceiver module User Manual T77H395 00
HON HAI Precision Ind. Co., Ltd. NFC 13.56MHz RFID transceiver module T77H395 00
Contents
- 1. User Manual
- 2. User Manual - Statements
User Manual
COMPANY CONFIDENTIAL
1
T77H395 User Manual
Project Name
NFC (Near Field Communication) Module
Rev.
01
FOXCONN Part No.
T77H395
Module Rev. 045
Revision History
Revision Date Originator Comment
0.1 2012/07/18
Wei.Liao Initial
COMPANY CONFIDENTIAL
2
Content
REVISION HISTORY .......................................................................................................................................................1
1. INTRODUCTION ..........................................................................................................................................................3
2. NFC STANDARD CONFORMANCE.........................................................................................................................5
3. HARDWARE SPECIFICATION..................................................................................................................................6
4. PRODUCT REQUIREMENTS....................................................................................................................................7
5. INTERFACE OF CONNECTOR.................................................................................................................................7
COMPANY CONFIDENTIAL
3
1. Introduction
The T77H395.00 NFC module provides contactless payment, contactless ticketing, service
discovery, exchange information etc. This module is based on Broadcom BCM20792S
solution, which is integrated NFC subsystem, interfaces, and microprocessor and memory
unit.
1.1 Scope
The NFC module supports for the ISO/IEC 18092, ISO/IEC 21481, ISO/IEC 14443
Types A, B and B’, Japanese industrial standard (JIS)(X) 6319-4, and ISO/IEC 15693
standards, etc.
1.2 Function
• NFC Features
- Reader & Writer mode
- Peer-to-Peer Communication mode
- Card emulation mode
• BSC (I
2
C-compatible) for host Interface, support all speed mode:
- Low-speed mode (100 kbps)
- Fast mode (400 kbps)
- High-speed mode (3.4Mbps)
•
2-layers PCB printed antenna with 30mmx30mmx0.35mm size and 5 turns design
• On board XTAL of 26 MHz (+/- 10ppm)
• Option for on board embedded Secure Element (eSE) with 800kBytes flash
memory
Remark: eSE can be replaced by external SIM memory on platform.
• Windows 8 Logo Device Requirement compliant
- NFC Forum Wave1 Certification
- LLCP
- SNEP
• RoHS and Green Compliant
COMPANY CONFIDENTIAL
4
1.3 Electrical Characteristics
Parameter Minimum Typical Maximum Units
Frequency Range - 13.56 - MHz
VBAT 2.3 - 5.5 V
VDD I/O 1.62 - 3.6 V
UICC (class C) 1.78 1.88 1.98 V
Input Supply
Voltage UICC (class B) 2.9 3.1 3.3 V
Communication distance 20 - - mm
Peer to Peer Communication Speed - - 424 Kbps
NFC wake up Wake up NFC module from sleep mode by
NFC_WAKE signal via I
2
C command
Operating Temperature 0 ~ 70 ℃
Storage Temperature -20 ~ 85 ℃
Storage Humidity 0 ~ 85 %
COMPANY CONFIDENTIAL
5
2. NFC standard conformance
Supported smart card (IC Card) types
Read CSN (Card
Serial Number)
Read/Write
application data
area
Typical
operational
distance
Supported baud
rates
NFC Forum Type1 Tag Yes Yes 40 106
NFC Forum Type2 Tag Yes Yes 40 106
NFC Forum Type3 Tag Yes Yes 40 212
NFC Forum Type4 Tag Yes Yes 20 106
ISO/IEC 14443 Type A
compliance cards
Yes Yes 20 106, 212, 424
Mifare Classics 1K,4K No No
Mifare DESFire No No
Mifare Ultralight Yes Yes
Mifare Plus No No
(Mifare) SmartMX No No
ISO/IEC 14443 Type B
compliance cards
Yes TBD 20 106, 212, 424
Jyuki ( ) cards (*1) issued
by Japanese Government
TBD TBD
FeliCa general card TBD
TBD
FeliCa Edy card TBD
TBD
FeliCa Suica card TBD
TBD
FeliCa PKI Option card TBD
TBD
HID iCLASS TBD
TBD
Other card if any Yes Yes 52 Various
Other industrial standards and specifications
Standard Yes / No Note
I
2
C
Yes (Mandatory)
PC/SC 2.0 Yes (Mandatory)
ISO/IEC 18092 (NFCIP-1) Yes (Mandatory)
ISO/IEC 15693 Yes (Mandatory)
ISO/IEC 21481 (NFCIP-2) Yes (Mandatory)
Contact-less EMV Yes
PKCS#11
TBD
CSP
TBD
FIPS 201 PIV-II
TBD
ISO standards at various bit rates
ISO/IEC 14443 A and B, Felica, and NFC Forum Modes
Standard Reader/Initiator Tag/Target
Data Rate (kbps) 106
212
424
106
212
424
ISO/IEC 14443 A v v v v v v
ISO/IEC 14443 B v v v v v v
ISO/IEC 14443 B - Prime
v v v
ISO/IEC 18092/ECMA 340 Active v v v v v v
ISO/IEC 18092/ECMA 340 Passive v v v v v v
JIS(X) 6319-4 FeliCa
v v
v v
COMPANY CONFIDENTIAL
6
3. Hardware Specification
3.1 Antenna Electrical Specification
Parameter Typical Units
Operating frequency range 13.56 MHz
Communication distance > 20 mm
3.2 Antenna smith chart and on board antenna drawing.
Network Analyzer used to measure s-parameters of antenna with TDK ferrite and steel
plate.
Frequency swept from 1 to 101 MHz. Impedance at 13.56MHz = 5.16 + j129 ohms.
3.3 Antenna simulation
Reader mode and Tag or Card Emulation frequency response
COMPANY CONFIDENTIAL
7
4. Product Requirements
4.1 Hardware Requirements
Form factor 42 mm x30mm module with 10-pin FPC connector
Host Interface BSC (I
2
C -compatible) interface
PCB 4-layer design
4.2 Hardware Architecture
The T77H395.00 NFC module is based on Broadcom BCM20792S solution, which is
integrated NFC subsystem, interfaces, and microprocessor and memory unit. This module
is powered from the host (3.3V) and interfaces to the host with I
2
C signals and with one-
printed antennas, one on-board 26 MHz XTAL and option for one Secure Element (eSE)
with 800kBytes flash memory.
The functional block diagram is shown as below.
5. Interface of Connector
Pin definition
Pin
Symbol I/O Note
1 VBAT Input Power supply from battery (2.3V - 5.5V)
2 VDDIO Input Power supply to I/O (1.62V – 3.6V)
3 VDD_Ext_SE Outpu
t
Power supply to External Secure Element (1.65V -
1.95V)
4 I
2
C -SDA I/O BSC Serial Data Line, active low
5 I
2
C -SCL I BSC Serial Clock
6 GND G Ground
7 IRQ-NFC O BSC request, active high
8 UIM_PWR Input Power supply to UICC
9 SWP I SWP I/O 0 (Single-Wire Protocol interface)
10
NFC_PRESENCE
G Ground
S1
GND G Ground
S2
GND G Ground
COMPANY CONFIDENTIAL
8
6. Test tool and SOP
Refer to another document for test sop.