HON HAI PRECISION IND J20H081 802.11ac/abgn/BT wireless module User Manual J20H081 00 20131015a

HON HAI Precision Ind. Co., Ltd. 802.11ac/abgn/BT wireless module J20H081 00 20131015a

UserManual.wiki >

HON HAI PRECISION IND >

J20H081 User Manual

User Manual.pdf

!2!Project Name WiFi+BT moduleApproval Sheet Rev. 1.2Foxconn Part No. J20H081.00 Prepared by Reviewed by Approved by Clon Liu Eddie Huang Ambit Microsystems (Shanghai) LTD.No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China Tel :86-21-61206688 Ext:22165 FAX:86-21-57749230 User Manual of J20H081

!3!CONTENTS1 REVISION HISTORY!/////////////////////////////////////////////////////////////////////!4 2 MANUFACTURING INFORMATION!////////////////////////////////////////////////////////!5 3 PRODUCT OVERVIEW!///////////////////////////////////////////////////////////////////!6 3.1 APPLICATION SCOPE!////////////////////////////////////////////////////////////////////!6 4 MODULE HARDWARE OVERVIEW!////////////////////////////////////////////////////////!7 4.1 BLOCK DIAGRAM!///////////////////////////////////////////////////////////////////////!7 4.2 FEATURES!////////////////////////////////////////////////////////////////////////////!7 4.3 INTERFACE AND CONNECTOR!/////////////////////////////////////////////////////////////!7 5 ELECTRICAL SPECIFICATION!////////////////////////////////////////////////////////////!9 5.1 ABSOLUTE MAXIMUM RATING!/////////////////////////////////////////////////////////////!9 5.2 RECOMMENDED OPERATING RATING!///////////////////////////////////////////////////////!9 5.3 DC CHARACTERISTICS!//////////////////////////////////////////////////////////////////!9 5.4 ESD INFORMATION!/////////////////////////////////////////////////////////////////////!9 5.5 ENVIRONMENT STORAGE CONDITION!///////////////////////////////////////////////////////!9 6 RF SPECIFICATION!////////////////////////////////////////////////////////////////////!21 6.1 IEEE802.11B!////////////////////////////////////////////////////////////////////////!21 6.2 IEEE802.11G!////////////////////////////////////////////////////////////////////////!22 6.3 802.11NHT20!///////////////////////////////////////////////////////////////////////!23 6.4 802.11A!/////////////////////////////////////////////////////////////////////////////!25 6.5 802.11AN HT20!//////////////////////////////////////////////////////////////////////!26 6.6 802.11AN HT40!//////////////////////////////////////////////////////////////////////!27 6.7 802.11AC HT80!//////////////////////////////////////////////////////////////////////!28 6.8 BLUETOOTH 3.0!///////////////////////////////////////////////////////////////////////!29 6.9 ANTENNA ELECTRICAL SPECIFICATION/////////////////////////////////////////////////////!2: 7 MECHANICAL SPECIFICATIONS/////////////////////////////////////////////////////////!31 7.1 SHIELDING COVER DIMENSION!///////////////////////////////////////////////////////////!31 7.2 PCB ASSEMBLY DIMENSION!/////////////////////////////////////////////////////////////!32

!4!1 Revision History !Date Document revision Change Description 2013/08/31 1.0 Initial release 2013/10/14 1.1 Add BT specification and modify Wifi specification 2013/10/15 1.2 Modify BT standard from V3.0+HS standard to V3.0 standard Add specification of Aux antenna!

!5!2 Manufacturing Information Manufacture Country: Made in China Manufacturer:Ambit Microsystems (Shanghai) LTD. Manufacture Address: No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China

!6!3 Product Overview The J20H081.00 802.11a/b/g/n/ac and BT3.0 module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. This module is based on MTK MT7650U solution .It fully complies with IEEE 802.11n,IEEE 802.11 a/b/g and ,IEEE 802.11 ac standards,!Bluetooth v2.1+EDR, v3.0 standard, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. 3.1 Application scope The wireless LAN is compliant to IEEE 802.11n,IEEE 802.11 a/b/g and IEEE 802.11 ac standards . The data rate of 802.11b is up to 11Mbps and fallback rates of 5.5, 2, 1Mbps. The data rate of 802.11a/g is up to 54Mbps and fallback rates of 48,36,24,18,12,9, 6Mbps. The data rate of 802.11n HT20 is up to 65Mbps and fallback rates of 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps; The data rate of 802.11n HT40 is up to 130Mbps and fallback rates of 117, 104, 78, 52, 39, 26, 13Mbps; The data rate of 802.11ac VHT80 is up to 433.3Mbps and fallback rates of 390,325,292.5,260,195,130,97.5,65,32.5Mbps;!The BT Module is compliant to Bluetooth 3.0 and EDR standard: Carrier Frequency: 2402MHz ~ 2480 MHz Carrier Spacing: 1.0MHz Duplexing: TDD Modulation: FHSS GFSK, pi/4-DQPSK, 8DPSK Symbol Rate: 1Mbps (GFSK), 2Mbps (pi/4-DQPSK), 3Mbps (8DPSK)

!7!4 Module Hardware Overview 4.1 Block Diagram The general HW architecture is shown below Figure: .Module Block Diagram 4.2 Features i IEEE802.11a/b/g/n/ac (1X1) based on MTK MT7650U solution. i Support BT3.0 i USB 2.0 Interface, High and Full Speeds supported. i Module is powered by the host with a 5.0V +/- 5% supply. i External PCB printed antennas. i 4 layers through hole PCB design with FR4 material 4.3 Interface and Connector iPin definition: iVendor: JST iVendor P/N: SM05B-GHS-TB

!8!Pin Number Symbol Name Status Pin definition 1GND Ground 2DP I/O USB positive data 3DM I/O USB negative data 4UV+ P USB +5V power input 5GND Ground S1 GND Ground S2 GND Ground

!9!5 Electrical Specification 5.1 Absolute maximum rating !Element Symbol Min Typ Max UnitDC supply voltage UV+ 5.0 6.5 (V) 5.2 Recommended operating rating !Element Symbol Min Typ Max UnitDC supply voltage UV+ 4.5 5.0 5.5 (V) 5.3 DC Characteristics Symbol Parameter Min Typ. Max UnitUV+Supply voltage 4.5 5.0 5.5 (V) 2.4GHz Tx Current(1M/15dBm) 200 (mA) 2.4GHz Tx Current(11M/15dBm) - (mA) 2.4GHz Tx Current(6M/15dBm) - (mA) 2.4GHz Tx Current(54M/15dBm) 220 (mA) 2.4GHz Tx Current(MCS0/15Bm/HT20) 220 (mA) 2.4GHz Tx Current(MCS7/15dBm/HT20) 220 (mA) Rx Current 80 (mA)5GHz Tx Current(6M/12dBm) - (mA) 5GHz Tx Current(54M/12dBm) - (mA)5GHz Tx Current(MCS0/12Bm/HT20) - (mA)5GHz Tx Current(MCS7/12dBm/HT20) - (mA)5GHz Tx Current(MCS0/12Bm/HT40) - (mA)5GHz Tx Current(MCS7/12dBm/HT40) 300 (mA)5GHz Tx Current(MCS0/11Bm/VHT80) - (mA)5GHz Tx Current(MCS9/11dBm/VHT80) - (mA)!5.4 ESD Information Mode Level UnitHBM 1000 V !5.5 Environment Storage Condition !

!:!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Environment condition Temperature Operating Temperature: -10 deg.C ~70 deg.C Storage Temperature: -40 deg.C ~85 deg.C Humidity Operating Humidity: 20% ~90% Storage Humidity: 20% ~90%

!21!6 RF Specification 6.1 IEEE802.11b!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Items Contents Specification IEEE802.11b Mode DSSS / CCK Channel CH1 to CH11 Data rate 1, 2, 5.5, 11Mbps TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@1Mbps 13.5 15 16.5 dBm2) Target Power@2Mbps 13.5 15 16.5 dBm3) Target Power@5.5Mbps 13.5 15 16.5 dBm4) Target Power@11Mbps 13.5 15 16.5 dBm2. Spectrum Mask @15dBm 1) fc-33MHz І f І fc-22MHz - - -50 dBr 2) fc-22MHz І f І fc-11MHz - - -30 dBr 3) fc+11MHz І f І fc+22MHz - - -30 dBr 4) fc+22MHz І f І fc+33MHz - - -50 dBr 3. Frequency Error -10 - +10 ppm 4 Modulation Accuracy(EVM)@15dBm 1) 1Mbps - -10 dB 2) 2Mbps - -10 dB 3) 5.5Mbps - -10 dB 4) 11Mbps - -10 dB RX Characteristics Min. Typ. Max. Unit 5 Minimum Input Level Sensitivity 1) 1Mbps (FERЉ8%) - -92 -91 dBm 2) 2Mbps (FERЉ8%) --91 -89 dBm 3) 5.5Mbps (FERЉ8%) --90 -87 dBm 4) 11Mbps (FERЉ8%) --89 -85 dBm 6 Maximum Input Level (FERЉ8%) -10 -5 - dBm !!!!!!!!!!!!!!!!!!

!22!6.2 IEEE802.11g Items Contents Specification IEEE802.11g Mode OFDMChannel CH1 to CH11 Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@6Mbps 13.5 15 16.5 dBm 2) Target Power@9Mbps 13.5 15 16.5 dBm 3) Target Power@12Mbps 13.5 15 16.5 dBm 4) Target Power@18Mbps 13.5 15 16.5 dBm 5) Target Power@24Mbps 13.5 15 16.5 dBm 6) Target Power@36Mbps 13.5 15 16.5 dBm 7) Target Power@48Mbps 13.5 15 16.5 dBm 8) Target Power@54Mbps 13.5 15 16.5 dBm 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -40 dBr 3 Modulation Accuracy(EVM)@15dBm 1) 6Mbps - - -5 dB 2) 9Mbps - - -8 dB 3) 12Mbps - - -10 dB 4) 18Mbps - - -13 dB 5) 24Mbps - - -16 dB 6) 36Mbps - - -19 dB 7) 48Mbps - - -22 dB 8) 54Mbps - -28 -25 dB 4 Frequency Error -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) - -92 -83 dBm 2) 9Mbps (PER < 10%) - -91 -81 dBm 3) 12Mbps (PER < 10%) - -90 -79 dBm 4) 18Mbps (PER < 10%) - -87 -77 dBm 5) 24Mbps (PER < 10%) - -85 -75 dBm 6) 36Mbps (PER < 10%) - -80 -73 dBm 7) 48Mbps (PER < 10%) - -77 -71 dBm 8) 54Mbps (PER < 10%) - -75 -69 dBm 6 Maximum Input Level (PER < 10%) -20 -11 - dBm !

!23!6.3 802.11n HT20 Items Contents Specification IEEE802.11n HT20 Mode OFDMChannel CH2 to CH10 Data rate (MCS index) MCS0/1/2/3/4/5/6/7 TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@MCS0 13.5 15 16.5 dBm 2) Target Power@ MCS1 13.5 15 16.5 dBm 3) Target Power@ MCS2 13.5 15 16.5 dBm 4) Target Power@ MCS3 13.5 15 16.5 dBm 5) Target Power@ MCS4 13.5 15 16.5 dBm 6) Target Power@ MCS5 13.5 15 16.5 dBm 7) Target Power@ MCS6 13.5 15 16.5 dBm 8) Target Power@ MCS7 13.5 15 16.5 dBm 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -45 dBr 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - - -28 dB 4. Frequency Error -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) - -91 -81 dBm2) MCS1 (PER < 10%) - -89 -79 dBm3) MCS2 (PER < 10%) - -87 -77 dBm4) MCS3 (PER < 10%) - -84 -75 dBm5) MCS4 (PER < 10%) - -80 -73 dBm6) MCS5 (PER < 10%) - -75 -71 dBm7) MCS6 (PER < 10%) - -74 -69 dBm8) MCS7 (PER < 10%) - -72 -67 dBm6. Maximum Input Level (PER < 10%) -20 -10 - dBm

!24!Items Contents Specification IEEE802.11n HT20 Mode OFDMChannel CH1, CH11 Data rate (MCS index) MCS0/1/2/3/4/5/6/7 TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@MCS0 12.5 14 15.5 dBm 2) Target Power@ MCS1 12.5 14 15.5 dBm 3) Target Power@ MCS2 12.5 14 15.5 dBm 4) Target Power@ MCS3 12.5 14 15.5 dBm 5) Target Power@ MCS4 12.5 14 15.5 dBm 6) Target Power@ MCS5 12.5 14 15.5 dBm 7) Target Power@ MCS6 12.5 14 15.5 dBm 8) Target Power@ MCS7 12.5 14 15.5 dBm 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -45 dBr 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - - -28 dB 4. Frequency Error -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) - -91 -81 dBm2) MCS1 (PER < 10%) - -89 -79 dBm3) MCS2 (PER < 10%) - -87 -77 dBm4) MCS3 (PER < 10%) - -84 -75 dBm5) MCS4 (PER < 10%) - -80 -73 dBm6) MCS5 (PER < 10%) - -75 -71 dBm7) MCS6 (PER < 10%) - -74 -69 dBm8) MCS7 (PER < 10%) - -72 -67 dBm6. Maximum Input Level (PER < 10%) -20 -10 - dBm

!25!6.4 802.11a Items Contents Specification IEEE802.11a Mode OFDMChannel CH36 to CH165 Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@6Mbps 10.5 12 13.5 dBm 2) Target Power@9Mbps 10.5 12 13.5 dBm 3) Target Power@12Mbps 10.5 12 13.5 dBm 4) Target Power@18Mbps 10.5 12 13.5 dBm 5) Target Power@24Mbps 10.5 12 13.5 dBm 6) Target Power@36Mbps 10.5 12 13.5 dBm 7) Target Power@48Mbps 10.5 12 13.5 dBm 8) Target Power@54Mbps 10.5 12 13.5 dBm 2. Spectrum Mask @12dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -40 dBr 3 Modulation Accuracy(EVM)@15dBm 1) 6Mbps - - -5 dB 2) 9Mbps - - -8 dB 3) 12Mbps - - -10 dB 4) 18Mbps - - -13 dB 5) 24Mbps - - -16 dB 6) 36Mbps - - -19 dB 7) 48Mbps - - -22 dB 8) 54Mbps - -28 -25 dB 4 Frequency Error -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) - -92 -83 dBm 2) 9Mbps (PER < 10%) - -91 -81 dBm 3) 12Mbps (PER < 10%) - -90 -79 dBm 4) 18Mbps (PER < 10%) - -87 -77 dBm 5) 24Mbps (PER < 10%) - -85 -75 dBm 6) 36Mbps (PER < 10%) - -80 -73 dBm 7) 48Mbps (PER < 10%) - -77 -71 dBm 8) 54Mbps (PER < 10%) - -75 -69 dBm 6 Maximum Input Level (PER < 10%) -20 -11 - dBm !!!!!!!!!!!!

!26!6.5 802.11an HT20 !!!!!!!!!Items Contents Specification IEEE802.11an HT20 Mode OFDMChannel CH36 to CH165 Data rate (MCS index) MCS0/1/2/3/4/5/6/7 TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@MCS0 10.5 12 13.5 dBm 2) Target Power@ MCS1 10.5 12 13.5 dBm 3) Target Power@ MCS2 10.5 12 13.5 dBm 4) Target Power@ MCS3 10.5 12 13.5 dBm 5) Target Power@ MCS4 10.5 12 13.5 dBm 6) Target Power@ MCS5 10.5 12 13.5 dBm 7) Target Power@ MCS6 10.5 12 13.5 dBm 8) Target Power@ MCS7 10.5 12 13.5 dBm 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -45 dBr 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - - -28 dB 4. Frequency Error -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) - -91 -81 dBm2) MCS1 (PER < 10%) - -89 -79 dBm3) MCS2 (PER < 10%) - -87 -77 dBm4) MCS3 (PER < 10%) - -84 -75 dBm5) MCS4 (PER < 10%) - -80 -73 dBm6) MCS5 (PER < 10%) - -75 -71 dBm7) MCS6 (PER < 10%) - -74 -69 dBm8) MCS7 (PER < 10%) - -72 -67 dBm6. Maximum Input Level (PER < 10%) -20 -10 - dBm

!27!6.6 802.11an HT40 !Items Contents Specification IEEE802.11an HT20 Mode OFDMChannel CH38 to CH159 Data rate (MCS index) MCS0/1/2/3/4/5/6/7 TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@MCS0 10.5 12 13.5 dBm 2) Target Power@ MCS1 10.5 12 13.5 dBm 3) Target Power@ MCS2 10.5 12 13.5 dBm 4) Target Power@ MCS3 10.5 12 13.5 dBm 5) Target Power@ MCS4 10.5 12 13.5 dBm 6) Target Power@ MCS5 10.5 12 13.5 dBm 7) Target Power@ MCS6 10.5 12 13.5 dBm 8) Target Power@ MCS7 10.5 12 13.5 dBm 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -45 dBr 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - - -28 dB 4. Frequency Error -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) - -88 -78 dBm2) MCS1 (PER < 10%) - -86 -76 dBm3) MCS2 (PER < 10%) - -84 -74 dBm4) MCS3 (PER < 10%) - -81 -72 dBm5) MCS4 (PER < 10%) - -77 -70 dBm6) MCS5 (PER < 10%) - -72 -68 dBm7) MCS6 (PER < 10%) - -71 -66 dBm8) MCS7 (PER < 10%) - -69 -64 dBm6. Maximum Input Level (PER < 10%) -20 -10 - dBm

!28!6.7 802.11ac HT80 !!!!!!!!Items Contents Specification IEEE802.11ac HT80 Mode OFDMChannel CH42 to CH155 Data rate (MCS index) MCS0/1/2/3/4/5/6/7/8/9 TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) Target Power@MCS0 9.5 11 12.5 dBm 2) Target Power@ MCS1 9.5 11 12.5 dBm 3) Target Power@ MCS2 9.5 11 12.5 dBm 4) Target Power@ MCS3 9.5 11 12.5 dBm 5) Target Power@ MCS4 9.5 11 12.5 dBm 6) Target Power@ MCS5 9.5 11 12.5 dBm 7) Target Power@ MCS6 9.5 11 12.5 dBm 8) Target Power@ MCS7 9.5 11 12.5 dBm 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz - - -20 dBr 2) at fc +/- 20MHz - - -28 dBr 3) at fc > +/-30MHz - - -45 dBr 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - - -28 dB 4. Frequency Error -10 - +10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) - -80 -75 dBm2) MCS1 (PER < 10%) - -78 -73 dBm3) MCS2 (PER < 10%) - -76 -71 dBm4) MCS3 (PER < 10%) - -74 -69 dBm5) MCS4 (PER < 10%) - -72 -67 dBm6) MCS5 (PER < 10%) - -70 -65 dBm7) MCS6 (PER < 10%) - -68 -63 dBm8) MCS7 (PER < 10%) - -66 -61 dBm9) MCS7 (PER < 10%) - -63 -58 dBm10) MCS7 (PER < 10%) - -59 -54 dBm6. Maximum Input Level (PER < 10%) -20 -10 - dBm

!29!6.8 Bluetooth 3.0 !!!Items Contents - TX Characteristics - Min. Typ. Max. Unit1. Power Levels !BT Output Power (Basic Data Rate) -3 0 2 dBm 2. Initial Carrier Frequency Tolerance Average Offset -75 0 75 kHz 3. Carrier Drift Drift Rate DH1 -20 0 20 kHz/50usDH3 -20 0 20 kHz/50usDH5 -20 0 20 kHz/50usAverage Drift DH1 -25 0 25 kHzDH3 -40 0 40 kHzDH5 -40 0 40 kHz4. Modulation CharacteristicF1avg 140 150 175 kHz F2max 115 140 kHzF1/F2 Ratio 0.8 0.96 5. EDR Carrier Frequency Stability and Modulation Accuracy2Mbps:±/4 DQPSK Initial Frequency Error: j-75 0 75 kHzFrequency Error: 1-10 0 10 kHzBlock Frequency Error: j!,!1-75 0 75 kHzRMS DEVM - 0.05 0.2 Peak DEVM - 0.12 0.35 99% DEVM (% Symbols <=0.3) 99% 100% 3Mbps:8DPSK Initial Frequency Error: j-75 0 75 kHzFrequency Error: 1-10 0 10 kHzBlock Frequency Error: j!,!1-75 0 75 kHzRMS DEVM - 0.05 0.13 Peak DEVM - 0.13 0.25 99% DEVM (% Symbols <=0.13) 99% 100% - RX Characteristics - Min. Typ. Max. Unit1. Minimum Input Level Sensitivity!!! ! GFSK (1Mbps) - -88 -79 dBm ±/4 DQPSK (2Mbps) - -88 -79 dBm 8DPSK (3Mbps) - -84 -76 dBm

!2:!6.9 Antenna Electrical Specification !Parameter Value UnitsOperating frequency range 2.4 ~ 2.4835 5.15~5.85 GHzAntenna gain (max) -0.41.12 dBi (Main Antenna) Antenna gain (max) 0.28 0.9dBi (Aux Antenna)

!31!7 Mechanical Specifications 7.1 Shielding Cover Dimension Dimension (LxWxH): 25.19mm x 18.56mm x 2.0mm Thickness: 0.2mm !!!!!!!!

!32!7.2 PCB Assembly Dimension Dimension (W x Lx H ): 63.8mmx20mmx1.0mm PCB: 4 layer HF-FR4 design Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.

!33!However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 2878D-J20H081”.Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D- J20H081". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. Caution :(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and

!34!5470-5725 MHz shall comply with the e.i.r.p. limit; and (iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. (iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party

!35!responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. !Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluatingthe end product (including the transmitter) and obtaining a separate FCC authorization.End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: MCLJ20H081”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. For Taiwan ᤞ፿Κ!(ሽॾጥࠫ୴᙮ᕴޗࠌش)ᆖীڤᎁᢞٽ௑հ܅פ෷୴᙮ሽᖲΔॺᆖ๺ױΔֆ׹Ε೸ᇆࢨࠌشृ݁լ൓ᖐ۞᧢ޓ᙮!෷ΕףՕפ෷ࢨ᧢ޓ଺๻ૠհ௽ࢤ֗פ౨Ζ!܅פ෷୴᙮ሽᖲհࠌشլ൓ᐙ᥼ଆ౰ڜ٤֗եឫٽऄຏॾΙᆖ࿇෼ڶեឫ෼ွழΔᚨم!ܛೖشΔࠀޏ࿳۟ྤեឫழֱ൓ᤉᥛࠌشΖছႈٽऄຏॾΔਐࠉሽॾऄ๵ࡳ܂ᄐհྤᒵ!ሽຏॾΖ܅פ෷୴᙮ሽᖲႊݴ࠹ٽऄຏॾࢨՠᄐΕઝᖂ֗᠔᛭شሽंᘿ୴ࢤሽᖲ๻ໂհ!եឫΖ!Note: 1. ءᑓิ࣍࠷൓ᎁᢞ৵ലࠉ๵ࡳ࣍ᑓิء᧯ᑑقᐉ᧭ٽ௑ᑑ᧘!2. ߓอᐗ೸ᚨ࣍ؓ!؀Ղᑑقψءข঴փܶ୴᙮ᑓิ: XXXyyyLPDzzzz-x (NCC ID) ωڗᑌ!!!

!36!Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: EN 60950Ͳ1: 2006+A11:2009+A1:2010+A12:2011 Safety of Information Technology Equipment EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 HzͲ300 GHz) (IEC 62311:2007 (Modified)) EN 300 328 V1.8.1 (2012); Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN coveringessential requirements under article 3.2 of the R&TTE Directive EN 301 893 V1.7.1: (2012) Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive EN 301 489-1 V1.9.2 (2011) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.2.1 (2012) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment National Authorities were informed according to Article 6.4 of Frequency Notification. Special Requirements are considered. The product is labeled with CE Marking.

!37!